Banner saying updated to 8.1 Windows

Similar Questions

• I just bought a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  I JUST BOUGHT a key code to update from microsoft for windows xp. When I enter the code is says I have an invalid code? can someone help me?

  Hello

  1. what exactly are you referring?
  2. Enter the code to upgrade the main code of the Office application or operating system?

  Follow the steps in this article.

  You receive an error message after you enter the product key when you try to install Windows XP
  http://support.Microsoft.com/kb/310637

• CC of Photoshop updater always crashes on WIndows 7, saying "finished".... ».

  CC of Photoshop updater always crashes on Windows 7, saying "finished".... ». Does not help restart. Whatever the initial cause of this condition, is it possible to reset the State of the installer, so that it can try again from the beginning?

  As suggested, I've resorted to uninstall/reinstall Photoshop CC (2014) to solve the problem. It seems a bit of a sledge hammer approach, but it did not take too long.

  As for the original cause of the problem, it may be associated with the fact that I also have Photoshop elements 11 is installed. I was able to recreate a similar problem when you try to update bridge CC. During installation, the update has complained that "ElementsAutoAnalyzer" was in running and (once this had been arrested) the update was not recovered successfully. I think it's the same thing during the update of Photoshop CC. Strange that I've never had this problem before, though - it's just the latest update which caused the problem.

• Cc of Photoshop is not updated once around (2015) says: Update error has not U43M1D204. -Windows 8.1.

  Lightroom updated fine.  Using Windows 8.1. 9 (I see solutions for mac in your previous questions)

  Can someone advise what to do in clear steps

  Geoff, I advise you to contact the customer service where the agent can remotely on your machine and solve the problem.

• Code800F900 'unknown error in windows update' trying to download windows vista service pack 2

  try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter

  * Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl

  Why did you delete your post where you said that Norton application has been installed at some point in the past?

  There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I updated my computer to windows 7 and now I'm having problems with my dns, I can't always on; the line. tells me having a problem with my dns server

  updated my computer to windows 7 and now can not conect with the dns can not get online always

  Upgrade to Win7 has nothing to do with Windows Update.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet or post in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS

  I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  How to fix Windows Update, Microsoft Update and Windows Server Update Services installation issues:
  http://support.Microsoft.com/kb/906602

  1. see the "need help?" Tell us what problem you are having"section of http://support.microsoft.com/ph/6527

  2. you cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  3. check your WindowsUpdate.log (% windir%\WindowsUpdate.log) to find errors associated with the download/install.

  How to read the WindowsUpdate.log file
  http://support.Microsoft.com/kb/902093

  3 b. errors compared to those listed here: http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1122 or go tohttp://windowsupdate.microsoft.com > click on help and Support link in the left pane > solve problems on your own.

  ================

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  ================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Accidentally updated my copy of Windows XP from SP2 to SP3. Is this legal?

  original title: upgrade WIndows XP error!

  I had windows xp edition SP2 family and my friend decided to upgrade using an illegal copy of windows xp service pack 3, is there anyway I can return to my legal version or be able to activate the one I have.

  Thank you

  Well, it's not really illegal to install windows on windows.

  in other words, let's say your computer preinstalled with windows sp2 came.

  then you went to the store and bought windows sp3 and sp2 installed.

  the scenario would not be illegal, but it would be a waste of money.

  Therefore, if the sp3 of windows that is installed on your system has not been activated on another computer 'or' it was turned off from the other computer, which is uninstalled, then use it on another computer is not illegal.

  personally, I have not seen the above scenario so my entry is somewhat limited.   but the good side of things is that if your sp3 windows is activated and can update microsoft servers, then you're ok.

  on the good side of things, now you have a bootable xp sp3 cd which can be handy for repairing the operating system if necessary in the future.

  in the meantime, don't make any more changes to your system or try to undo what you have now.

  First, confirm or not if windows sp3 is still active on another computer or has it been uninstalled from him.

  In addition, you may be able to simply replace the new product key with your first.

  Take a look at this Web page and look under the tab for xp:

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• Try to install the Update Rollup 2 for Windows XP Media Center Edition 2005 - on SP3.

  Hello

  All this started when my Xbox360 is dead, sent it for repair, came home another, all hung up and tried to connect to the Media Center. Of course, it did not work and the screen says to uninstall? (something), I forgot today, it has been a long road since then. BUT I uninstalled Update Rollup 2 for Windows XP Media Center Edition 2005 and updates that came after. NOW realize it was a mistake, I'm not of the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer. And I'm confused regarding why, for the first time, that I can't find a single KB article on this problem.

  And even if I did not restore the system off, there is no restore point on my machine.

  So I'm always searching in google and microsoft.com but a little lost right now.

  Moccan,
  Thanks for posting on the Microsoft answers Forum.  I would like to know if you read this article for the hotfix rollup: http://support.microsoft.com/kb/900325.  In particular the section more information, which has this:

  If the 886904 update is installed, you must uninstall the 886904 update before you install the Update Rollup 2 for Microsoft Windows XP Media Center Edition 2005. Otherwise, the installation of .NET Framework 1.1 SP1 will fail.

  To determine whether the 886904 update is installed, follow these steps:

  1. Click Start, click run, type appwiz.cpl, and then click OK.
  2. Click to select the Show updates check box.
  3. In the currently installed programs list, look for the following element:
     Fix for Microsoft .NET Framework 1.1 (KB886904)

  If you see this option, you must remove the hotfix. To remove the patch, click Microsoft .NET Framework 1.1 Hotfix (KB886904), and then click Remove. Then, visit the Windows Update Web sit to download and install the Update Rollup 2 for Windows XP Media Center Edition 2005.

  If you haven't checked out on this yet, then follow the steps below and let us know the result. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Restore to factory state out of the box. Can I install all updates from Microsoft using Windows update or can I install antivirus first before to connect to internet?

  Currently Windows Vista Home Premium SP1 x 86 (no patches since 2008). Currently, it has no AV and has not been connected to the internet yet. It will be behind a router.

  I had to redo the factory already reset after be connected to the net for 20 minutes and then a bunch of programs kept crashing saying Data Execution Prevention had to close the program StackHash and BEX error when executing update for HP drivers.

  Maybe I installed Kaspersky first next time?

  What should I do?

  Thank you!

  No problem. Install the updates. You can install the anti-virus later.

  Just don't start browsing the inet by updating.

• Started getting a message that says that my version of Windows is not genuine

  I started getting a message that says that my version of Windows is not genuine. Why would it be?

  Not authentic OT:Windows

  Hello

  Thanks for posting in the Microsoft community!

  The description of the question, I understand that you found Windows is not genuine. I'll be happy to help you on this question.

  You made any hardware or software comes to the computer before the show?

  Let us try the steps from the following links:

  Genuine Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows/help/genuine/FAQ

  The Windows Genuine Advantage validation is required when you download Windows updates
  http://support.Microsoft.com/kb/932348

  After trying the steps above suggested, giving us the results. If you are able to solve problem of Microsoft Genuine advantage or post us additional troubleshooting results.

• Update 10/11 Intel, windows boot

  Hi all

  I'm having some trouble with Windows updates.  I hope someone can help!
  All first of all, some of the details:
  MATERIAL (my apologies if I have too, it is easier to copy/paste):
  Motherboard: Intel BOXDH77KC LGA 1155 Intel H77 HDMI SATA 6 GB/s USB 3.0 ATX Intel
  Graphics processor: Intel Core i5 2310 Sandy Bridge 2.9 GHz (3.2 GHz Turbo Boost) LGA 1155 95 W Quad-Core Desktop INtel HD Graphics 2000 BX80623I52310
  RAM: Corsair DDR3 8 GB Vengeance LP
  SOFTWARE:
  Windows Vista Edition Home Premium.  Because the material is new, it is a new installation.  Service Packs 1 and 2 have been installed.  All updates have been installed except one...
  Also, I have i-tunes, Google Chrome, ZSNES, and Open Office installed, but guess it's superfluous.
  THE PROBLEM (and what I tried to fix it):
  I ran the standard update/restart process for a while until what I encountered a major problem.  Suddenly, I would get the logo of Microsoft with the loading bar, as usual, but just like the sound of Windows startup that's happened, my monitor light would go to the orange and all screens are dead.  I tried for an hour to see if it loaded, but he would not.  Sometimes, I could go as far as running in Mode safe, how she would continue confuguring update, ask a reboot and lead me to the same difficulty.  Rebooting did not help.  Curiously, it seems that it starts on a technical level, but cannot go beyond the Microsoft logo or reached even a login screen.
  With the help of the Vista installation disc, I used the setting of "Repair", who gave no useful result.  I recovered from a previous time, examined specifically updates and had an intuition that was causing the problem.  To be sure, I used the process of elimination; I have now installed all but one update.  This one:
  Intel Corporation - display - Intel(r) HD Graphics Family

  Download size: 33.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: recommended

  Updated software Intel Corporation display released in August 2011

  More information:

  http://winqual.Microsoft.com/support/?DriverID=20446426

  Help and Support:

  http://support.Microsoft.com/select/?target=hub
  It seems that it is the culprit.  Should I configure updates of it ignores, or is it possible to install it without making my computer in a large paperweight?
  Sorry if I was a bit convoluted to describe the problem.  Thanks in advance for your help.
  Best,
  Glass of Mister

  Hello

  It's my, Microsoft, recommendations on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back before being installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  If what I've said, this is your exact problem, I can't say with certainty.

  See you soon.

• What is the most recent NVIDIA graphics driver update for 32-bit windows vitsa specifications

  I looked on the site of NVIDIA and Geforce I can't get the graphics driver for my compaq cq50 computer I'm right now 8200M graphics drive but I can't find an update for it that will support my OEM. Is could someone please help me update my portable computers graphics driver?

  ...

  nVidia <> Microsoft.

  I guess what you're saying, is that you have Windows Vista 32 - bit and a video chipset from nVidia GeForce 8200 M.  I guess you went to nVidia and their utility to scan to see if you have the latest driver graphics driver?

  What he have to note you (if it is authorized on computer laptop yor by OEM) is:

  Verde 285.62 pilot

  Version: 285.62 - WHQL
  Release date: Monday 24 October 2011
  Operating system: Windows 7 32-bit, Windows Vista 32-bit
  Language: English (United States)
  File size: 150,63 MB

  You could try to remove the currently installed driver and before rebooting, install the one linked above.

• Update BIOS not in Windows?

  Laptop: dv4-5121tx

  How to upgrade to recent versions of BIOS from a USB port? I checked MANY pages in this regard. But they all refer to BIOS distributed in different formats and does not work for me.

  The BIOS file, sp66897.exe (last version, F.39) and sp60266.exe (previous version known to work, F.34), contains the following files

  01837.FD
  FlsHook.exe
  FlsHookDll.dll
  FWUpdLcl.exe
  InsydeFlash.exe
  iscflash.dll
  iscflash.sys
  iscflashx64.sys
  Platform.ini
  Xerces - c_2_7.dll

  There is none. BIN for. GIS files.

  I copied all the files on USB drive, renamed HP_TOOLS, in Notepad and 01837.fd drive copy of all of the different names appeared in other pages, connect the USB and power on with the Windows key + B down. End result is a black screen and flashing Caps Lock LED.

  Is it possible to recent BIOS update from USB? Or can I update in Ubuntu / WinPE or any other bootable device?

  Background:

  I took the laptop to it to the HP service center. Because I need to use the hard drive (formatted with TPG), I asked to removed the hard drive and HP engineer did. After repair, the laptop says something like «no device startup...» ». It is found that the BIOS has been DOWNGRADED to e.17 (initially F.34), which did not support GPT.

  Therefore, I need to update the BIOS and any method that requires the local hard disk is not usable.

  The hard drive quick test could run in the BIOS. This means that the hardware is OK. But the laptop doesn't know how to boot from the disc.

  I want to solve this problem by myself, because visiting HP Service Center is an EXTERMELY UNPLEASANT experience.

  Finally, updated the bios in windows pe.