Bar of progress Preloader problems

Similar Questions

• Firefox 5 adjustable to stop a connection and/or exposure has a bar of progression rather than a single "load"? I miss my 3 version after update.

  Firefox 5 adjustable to stop a connection and/or exposure has a bar of progression rather than a single "load"? I miss my version 3

  You can use this extension.

  • Evar-4-status: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

• I get a message on the tool bar saying that "solve problems on your computer.

  I get a message on the tool bar saying that "solve problems on your computer" and then I click on it, among the many solutions I get the msg "Windows Defender has stopped working properly" and I guess the solution is to update windows, what I did, but I still have not the same msg. Can someone please? Thank you

  Hello

  1. are you referring to the toolbar of internet explore?

  2 have you installed a third party toolbar?

  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Otherwise, I suggest you to give us more information about the issue so that we cam help you better.

  It will be useful.

• How to set the bar of progress "Please wait" on the screen of the blackberry

  Can all give the sample code to create a bar of progress on the screen of the blackberry. I have serached in google where I got code examples using the gauge field. Classy move, we should use to create a bar of progress.

  For this, you can use GaugeField... n code for this:

  http://docs.BlackBerry.com/en/developers/deliverables/11958/Progress_indicators_2_0_514034_11.jsp

  If you have found the solution please accept the congratulations...

• Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely. What can I do? Thank you

  Hello, my name is Todd, I recently downloaded PS CC 2014. I've used PS for decades. The crop tool will show the bar of progression, and to 25%, that it will stop completely, even on VERY small 72 dpi images. What can I do? Thank you!

  Double check all settings in the crop tool and make sure that you are not say things to create an image of HUGE due to your settings.

• To the help of text and a bar of progress inside a ToolTip.

  Hello
  
  I try to get my ToolTip appears as: "percentage: progressBar," but don't know how to do. I did so that the progress bar appears with the help of some users on this forum, but do not know how to use the text with it. Here's what I have:
  

  import java.awt.Dimension;
  import java.awt.BorderLayout;
  
  import javax.swing.JButton;
  import javax.swing.JFrame;
  import javax.swing.JToolTip;
  import javax.swing.JProgressBar;
  
  public class ToolTip {
  
       private JFrame frame;
       
       private JButton button;
       
       private JToolTip testToolTip;
  
       private JProgressBar progressBar;
  
       public static void main(String[] var) {
            new ToolTip();
       }
  
       public ToolTip() {
            progressBar = new JProgressBar(0, 100);
            progressBar.setValue(5);
            progressBar.setStringPainted(true);
          
            testToolTip = new JToolTip() {
                 {
                      setLayout(new BorderLayout());
                      add(progressBar);
                 }
  
                 @Override
                 public Dimension getPreferredSize() {
                      return new Dimension(150, 20);
                 }
            };
  
            button = new JButton("herp") {
                 
                 @Override
                 public JToolTip createToolTip() {
                      return testToolTip;
                 }
                 
            };
            button.setToolTipText("A");
            
            frame = new JFrame("derp");
            frame.setSize(100, 100);
            frame.getContentPane().add(button);
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setVisible(true);
       }
  
  }

  Re-reading this I'm not so sure my point will get everywhere, so roughly what I want is something that could implement a JLabel and JProgressBar inside the same ToolTip, label and the bar showing up to their respectful of progression.

  Hmm... not quite sure where you see the problem: what's the problem with adding a component that shows the text that you want to show him? Something like

          testToolTip = new JToolTip() {
              JLabel label = new JLabel();
              {
                  setLayout(new BorderLayout());
                  add(progressBar);
                  add(label, BorderLayout.NORTH);
              }
  
              /**
               * @inherited 
  
               */
              @Override
              public void setTipText(String tipText) {
                  label.setText(tipText);
              }
  
              @Override
              public Dimension getPreferredSize() {
                  return getLayout().preferredLayoutSize(this);
              }
  
          };
  

  as indicated on the button, which shows the tooltiptext could add something with a fixed text as well, or you want to :-)

  See you soon
  Jeanette

• Preloader problem

  Hi all

  I'm having some trouble with my preloader; Here's the thing, it opens and works but my child WHAT SWF always finishing well before loading preloader is finished. I'm really confused someone can help?

  Here is my code:

  var loader = new Loader;

  loader_mc. AddChild (loader);

  Loader.x = 0;

  Loader.y = 0;

  loader_mc.x = 122;

  loader_mc.y = 34;

  loader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, contentLoadF);

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, contentLoadedF);

  function contentLoadF (e) {}

  trace(e.bytesLoaded/e.bytesTotal * 100);

  };

  function contentLoadedF() {}

  trace ("Complete");

  };

  When I click a button it opens my SWF like this

  function buttonClick() {}

  Loader.Load (new URLRequest ("mySWF.swf"));

  }

  Thanks in advance for the HELP!

  Hi yuri,.

  you are only showing your swf loaded starts to play before your preload is complete.  expected: by default, sovereign wealth funds begin to play as soon as their Framework 1 assets are loaded, not when their possessions are loaded.  (they continue to load while they play).

  to remedy this, you must add a blank Keyframe in frame 1 of your loaded SWF and add a stop() in this first image so that the swf file does not start to play until the loading is complete.  When your preloader code indicates loading is complete, you can then use the following to start your loaded swf:

  MovieClip (loader.content) .play ();  where the is the charger that loads your swf file.

  (I know you don't want to do that, but, in this case, someone else with a similar problem detects your thread, I wanted to leave the correct answer.)

• Preloader problem a Spark component (stuck for a few minutes)

  Hello world

  Before, I'm excited about the new FlashBuilder because of his support to rotationX. But I'm not happy with the default preloader. I think this http://pagcor.lbeldia.com website (I'll be happy to know your criticism on the design. I'm not good with that. hehe ) and the default preloader to the Spark component remains for several minutes (even if the progress bar is 100%) before playing the next clip. I also changed the theme component but still the same.

  I need your advice.

  Thank you in advance.

  Looks like it loads the unsigned RSL frame version. Do you have an export version? You have swz files in your bin-release folder?

  Can you access the project properties, build the path and watch the RSL settings? (Expand Flex SDK, framework.swc to watch the property URL of RSL)

  Unsigned RSL will always run slower because they are not cached by the flash player as signed those.

• Another preloader problem

  all,

  I am also having a strange problem. I also use the tutorial from lynda.com. I am frustrated when it did not work, then recreated my movie step by step.

  rebuilt the file with all layers on frame 2. frame 1 is white, except for the code Dynamics/preloader text in the layer actions.

  everything tested fine.

  later, as I built it out film (for all frame 500), the preloader stopped working speedometer *.

  * I understand the problem of meter: under properties panel (with a selected clip), under the "export for actionscript" option ' export in frame 1' selected, disables the Visual meter in my preloader.

  Then I comment out the entire 1st frame coding (stop and preloader text) and the film plays very well and stops at the end.

  When I activate the "stop();" code, stops the playhead on frame 1 - then the game works.

  the problem comes when I delete the comment in the preloader text:

  • test mode: setting stops at 2 (only background shows, the playhead does not continue)

  the problem of the playhead staying in box 2 still exists. It makes me crazy!

  I'm on a mac OS x (snow leopard), mac pro dual/quad core, 8 GB ram

  any help would be greatly appreciated.

  the file can be downloaded here:

  http://www.roguedog.com/files/design/clients/d1r3.Fla.zip

  When the loading is complete, you are directing the playhead to the next section (2) and stop.  If you want use the playhead to move forward to the next section and play:

  Stop();

  Preloader

  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  function updatePreloader(evtObj:ProgressEvent):void

  {

  container for the progress of the site (download)

  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);

  preloader_txt. Text = % + '% ';

  If (p == 100) {}

  Play();

  }

  }

• Steering bar and progress

  Hi all

  I do a firmware via programming system exec.

  Currently, I could only update the bar with some time of my progress in a loop which is unable to have helped put an end to the process if exit out at the beginning of the system exec is not correct.

  Can someone give me a better idea to save time if the programming of the firmware does not work?

  Thank you in advance.

  Very simple solution:

  Use a method of communication (e.g. declaring) to notify your loop that the exec of the system is complete. Put the shipment notification just after the exec system VI, then inside of your loop, wait for notifications (with a low timeout) and if you receive the notifier, exit the loop.

  Most advanced solution:

  Your command-line programmer has an output that indicates the status of the programming? If it isn't... you could try to catch the output console during execution of the system exec (e.g. driving the console output to a file and read read-only file - as a tail under linux). I think that there are other ways to catch out of the console while it is running, but I don't remember not (perhaps with .NET?) - I don't know a search in the forums will give you details.

• How to increase the height of the bar system progress?

  Hello

  I want just to increase the height of the progress bar for windows system and is not able to customize. It is having the ability to adjust the width and the height. For example, the height of the progress bar of system used in install labview is large compared to the control that is in the control labview palette.

  I want that the progress bar as in the illustration below

  

  Thank you & best regards

  Samuel J

  System engineer

  CAPTRONIC systems

  Bangalore

  You cannot change the height of the horizontal blade in the system palette. You can use one of the modern palette that Mike has suggested, or you can use ActiveX ProgressBar or ProgressBar .NET if you run Windows. If you want to search for the latter, the forum as there are has examples.

• Cannot create a new folder using the link on command bar (Win 7) over problem of saving files newly downloaded into the folder of choice

  Greetings! And thanks for your visit. I was not a happy camper since my toys have acted toward the top. And eating too much of my time, with too few results. Here we go:

  • I'm unable to create a new folder or get No response after clicking on "new folder" on the command bar in Windows 7 (Professional).

  Nothing happening... not even an error message.  I can enter the existing folders (where individual files) but as I'm trying to create a new folder to put them in, I write off. But that's not all. There is another mystery plaguing my system (and I suspect that these two are related).  I am naïve about how to remedy the situation:

  • I can not save files to my desktop (x) - favorite mainly files I just downloaded and am trying to save;

  I get an error message indicating "you don't have permission to save to this place... you want to save it to My Documents instead? (No, I wouldn't.)  I'm connected with my regular user profile (which has administrator privileges). Yes... I checked in the user accounts and verified. (I am the only user on the system, in case this has an impact on the problem. Not sure if I should create a "dummy" another user without administrator privileges, but just throw that out there.) This seems to be mainly when I am trying to save a downloaded file or the executable file.

  I can if not create and/or move files without problem; It's just not very welcoming for new downloads.

  Between these two issues, I'm not having fun with this all-in-One Dell Optiplex (new).  She is on a home network and the only thing I have

  reminder to do recently is to join the homegroup with one of the other Win 7 PC on the same network. Maybe this related to not having 'permission' to save in some places? Or create new folders? I'm the kind of feeling sad and rejected...

  Any ideas or suggestions would be appreciated. FYI: I try not to visit the registry on my own I do not have a Guide of techno-GPS with me. I sailed quite well on my own otherwise, provided that I the registry (or any what presses along the way.) Please think about this and do the right thing. I'll wait here with my turn signals on.
  Ciao

  Hello

  You have discovered a problem with Windows 7. To resolve this problem, I use a program called FileMenu Tools. You can download the portable freeware from here: http://www.softpedia.com/get/PORTABLE-SOFTWARE/System/System-Enhancements/FileMenu-Tools-Portable.shtml .

  After having downloaded and installed the program, you will notice that, by default, each option is checked. I would be much more selective on this subject, otherwise your context menu will be a full page long! When the main window opens, you will see a list on the right side of all the elements that can be added to the context menu. Start weeding through the list and every one to take away, you don't need the United Nationsby checking the box.

  Once you have completed your selection (de-selections) make sure that you click the green check mark in the row of icons at the top of the left window of the interface to 'Apply' of your choice. The program can do much more, but that answers your specific question. I am told that the program has a good help file, so try here if you are interested.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• "Menu bar Spry" expanding box problem.

  Hello

  I wonder if anyone knows how to solve a 'expansion bar problem', associated with vertical menus bar spry.

  This problem occurs especially in Internet Explorer 10 and 11. All texts and images on the right of the menu spray are projected down to below the lower menu bar.

  The page is displayed in Firefox and Google Chrome 100%-125%, but the same thing would happen if I Zoom in more than 125%.

  The only potential incompatibility problem by Dreamweaver is the "expand the bar problem.

  Thanks in advance!

  Hello Ben,

  Thanks a lot for your suggestions.

  It seems that the problem had nothing to do with a "expanding box problem.

  I managed to solve the problem by introducing

  Michael

• JPGencoder and Preloader problem

  Hi guys, I have a swf that allows the user to take a snapshot of the scene, which works very well on its own.

  When I use an external preloader with it, I get the error:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  to over / frame1)

  I have tried importing the JPGEncoder in the preloader, but still not the same error.

  This is the preloader code:

  [AS]

  import com.adobe.images.JPGEncoder;

  var B:Loader = new Loader();

  B.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loop);

  B.contentLoaderInfo.addEventListener (Event.COMPLETE, done);

  B.Load (new URLRequest ("someurl.swf"));

  function loop(e:ProgressEvent):void

  {

  var perc:Number = e.bytesLoaded / e.bytesTotal;

  percentText.text = Math.ceil(perc*100).toString ();

  }

  function done(e:Event):void

  {

  removeChildAt (0);

  percentText = null;

  addChild (B);

  } [/ ACE]

  And the code of JPGEncoder:

  [AS]

  import com.adobe.images.JPGEncoder;

  //============================================================================

  var: matrix new matrix());

  Matrix.translate (stage.width, stage.height);

  snap_btn.addEventListener (MouseEvent.CLICK, snapShot);

  Snapshot function (evt:MouseEvent): void

  {

  displayCapturedBitmapData();

  function getBitmapData (target: DisplayObject): BitmapData

  {

  If (comics)

  {

  BD = null;

  }

  Target.Width and target.height can also be replaced by a fixed number.

  var BD: BitmapData = new BitmapData (920, 760, true, 0x00000000);

  EDI Draw (stage);

  var jpgEncoder:JPGEncoder = new JPGEncoder (90);

  var byteArray:ByteArray = jpgEncoder.encode (comics);

  var SERVICE_PATH:String = " " SERVICEPATH.php "; "

  var imageFileName:String = "testjpg.jpg";

  create a URL loader to send data to the server

  var loader: URLLoader = new URLLoader();

  var url: String = SERVICE_PATH + '? name ="+ imageFileName;

  var req:URLRequest = new URLRequest (url);

  Make sure that the server knows that it has an image

  req.requestHeaders = new Array (new URLRequestHeader ("Content-Type", "image/jpeg"));

  loader.dataFormat = URLLoaderDataFormat.BINARY;

  req.contentType = "image/jpeg";

  Req.Method = URLRequestMethod.POST;

  Req.Data = byteArray;

  Send the file

  Loader.Load (req);

  Return to comics;

  }

  function displayCapturedBitmapData (): void

  {

  var bmp:Bitmap = new Bitmap (getBitmapData (stage));

  addChild (bmp);

  BMP.x = 695.65;

  BMP.y = 56,76;

  BMP. Height = 190;

  BMP.width = 230;

  }

  }

  //==============================================

  [/ ACE]

  
  

  wrap all of your code (except your duties and the import statement) in an initialization function and add:

  this.addEventListener (Event.ADDED_TO_STAGE, init);

  your code is difficult to read because it is not formatted, I'm not sure what all the code in a function, but your new code should look like:

  import com.adobe.images.JPGEncoder

  this.addEventListener (Event.ADDED_TO_STAGE, init);

  var: matrix

  function init(e:Event):void {}

  matrix of new matrix());

  Matrix.translate (stage.width, stage.height);

  snap_btn.addEventListener (MouseEvent.CLICK, snapShot);

  }

  p.s. looks like you're nesting functions named.  You should unnest them.

• Bar loading/Progress Bar AS3 CS3

  Hello world
  
  I am in a big bind... I'm going Alph Sierra on this one.
  
  I'm a newbie trying to create a loading bar that indicates the percent remaining time or both (preferably) and instructions only I can find on the web on how to create is all AS2 that does not support my AS3 flash site. URGH! is there a way to get around this? does anyone know of a good bar loading AS3 that you can use in Flash CS3? Or how to create a loading bar AS3?
  
  Desperately need help.
  
  
  
  Murdock

  He comes to the conclusion:

  Simply change the FILENAME the filename of your SWF file
  create a MovieClip Gauge and Gauge the instance name
  _____________________________________________________________

  var request: URLRequest = new URLRequest ("FILENAME.swf");
  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loadProgress);
  loader.addEventListener (Event.COMPLETE, onComplete);
  function loadProgress(event:ProgressEvent):void {}
  var percentLoaded:Number = event.bytesLoaded/event.bytesTotal;
  percentLoaded = Math.round(percentLoaded * 100);
  trace ("loading:" + percentLoaded + "%");
  LoadBar. Width = percentLoaded;
  }
  function onComplete(event:Event) {}
  trace ("Done");
  }
  Loader.Load (request);
  addChild (loader);