Preloader problem a Spark component (stuck for a few minutes)

Similar Questions

• Open tabs which unused for a few minutes is no longer working and make me lose the page on what it is.

  I like to keep an eye open at all times, and Firefox has recently begun to spoil my tabs while I've never had a problem with this before. I think it started after the last update of Firefox.

  As mentioned above, if a tab remains open but unused for a few minutes while he was working in the other tabs, logo of the site next to the title of the page (for example Amazon 'a' logo with the arrow below "Your orders" for example) is replaced by the green rotation ring that usually indicates the loading, but it runs a lot faster that it did when it actually does something. When you click on the tab to open it again, it's just a blank tab and I have to manually track down the page that I was again. However, when I disconnect my computer or restart it so that the legs have the rings of green spinning on them, the next time I open Firefox once connected to my computer, it opens all tabs and the correct pages, but that if I did not click on / open one of the tabs so that they had the ring of green rotation thus making their return to blank tabs. If I click on a tab with green spinning ring (making it empty), then log start/stop and reopen Firefox on connection back to my computer, Firefox will have indeed lost the information on the page and he re - opens in a blank tab, as it was when the system is disconnected. On top of that, if the tabs are doing this fast spinning glitch green ring, he did everything I'm working on the slow race, such as making a video shift watching on Youtube. If I see that happen, I am obliged to go click on the tab (loss of his data in the process) and manually go back to the page, that I was still just once so that it stops make the green ring of fast rotation and I can watch my video smoothly, but it lasts only a few minutes before these pages start the glitch green ring once more and I have to repeat the process. Another oddity of the note is that this only happens to the tabs actually, I click on and open during each session. If I restart or disconnect my computer and connect again and restart Firefox, the green ring glitch does not reach one tabs I don't touch during my session. It happens to the tabs that I actually open this session, but it happens to every single tab that I do, I opened this session.

  It becomes very irritating and it's working in Firefox a huge concern, as happens constantly. Please fix this. Firefox has never done this to me before, so I don't understand why it's happening now. I have not downloaded or installed the new plug-ins or add-ons for Firefox, so I know I did nothing to the program to cause this.

  Thank you for picking me up in it. I look forward to hearing back as soon as POSSIBLE and to find a cure for this problem. This glitch is driving me crazy.

  The current versions of Firefox use the sessionstore-backups folder to store a few copies of the sessionstore file to make it possible to recover a few errors caused by a bad closing down.
  The 'upgrade.js with the attached version identifier are created when Firefox is updated.
  Previous versions of Firefox created the file sessionstore.bak with the attached version identifier.
  So that look OK.

  You can start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Could you possibly post your troubleshooting data?

  • https://support.Mozilla.org/KB/using+the+troubleshooting+information+page

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards

• Several applications have frozen or stopped working after connecting to the server for a few minutes

  Hi all

  I am facing the problem with my windows server 2012 R2. After I connect to the server and leave it there for a few minutes:

  • Some of system applications such as device, power, system, etc. Option Manager are stopped working. When I opened them, I have nothing.
  • All my applications c# (.Net Framework 3.5 ~ 4.5) was an error 'could not load file or assembly 'my_reference_libraries' or one of its dependencies. The system cannot find the specified file. ». I'm sure that's not the error I can run the application correctly before this problem occurred.
  • When I open "Manager configuration SQL Server 2014", I get the error "the instruction at 0x0023ae20 referenced memory at 0 x 00000058. The memory could not be read. »

  Strange thing is when this is the case, I can open "Event Viewer" and after opening, everything back to normal. I can open applications, including my c# programs without any error. It's not just my guess that I tried this work many times. Opening every time the "Event Viewer" has solved the problem. There may be other applications system who will be doing that job, too, but I have not tried everything.

  In case the Viewer, I got tons of errors for:

  • GroupPolicy - Group Policy processing failed. Windows could not apply the policy settings based on the register of the LocalGPO Group Policy object. Group Policy settings will not be solved until this event is resolved. View the event details for more information on the file name and path that caused the failure.
  • DistributedCOM - the server {06622D85-6856-4460-8DE1-A81921B41C4B} is not registered with DCOM within the required time.

  What could be the problem? My user session froze? I get trouble solving this for several weeks already and still got no chance.
  Any help would be greatly appreciated!

  Please advise!

  Thank you and best regards!

  Hello

  Any recently installed application? Examine the cpu and memory use?

  Let me you suggest reviewing your material, including memory. Added new hardware recently? A updated driver recently? Please update hardware drivers.

  The following forum might be more appropriate for your question:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• When I click on my documents or my pictures etc nothing happens for a few minutes, then get an error report.

  My documents will not be open. When I click on my documents or my pictures etc nothing happens for a few minutes then get an error report. I tried in safe mode and the same thing happened. Any ideas how to fix this or get my picture back please?

  If it is a recent development, try to perform a system restore to a time before your problem.  You may need to run from the command line as described in the following article:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"

  <>http://support.Microsoft.com/kb/304449 >

  HTH,

  JW

• my computer shutdown itself each time I use netflix for a few minutes

  my computer shutdown itself each time I use netflix for a few minutes. I don't know what the cause, but it's okay

  Hey, Zain.

  Of course, everything is not fine - as a result, the problem.  ;)
  My first thought would be overheating.  Clean dust from the computer lately (if ever)?

  Spent, I suggest you have a look through the system logs (right click on computer > manage; go to computer Management\System Tools\Event Vieewer) and find the event entry that indicates why the computer turns off.  You'll find it at ~ downtime (can be registered just before closing, can be generated on the reboot log entries.)  You devriez find the offending entry in Windows logs\System.
  Whatever it is, search through newspapers preceded entires, a yellow or red !

  HTH,
  Chris

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Internet connection disconnects after that I let it idle for a few minutes

  I have Internet Explorer and Windows 7, and after I have let any inactive site for a few minutes, I have to enter my password once again as if I'm starting for the first time.  After I entered my password for windows, it goes immediately to the site I've been on previously.  It started about 4 months ago, and I have no idea what caused it.

  Hi Marquette.

  To provide the proper resolution, that I would need more information on your side.

  1. this problem occurs only while browsing Internet?

  2. did you of recent changes on the computer before this problem?

  I suggest you to change the screen saver settings and check if it helps.

  a. right-click anywhere on your Windows 7 Desktop and select Customize from the context menu.

  b. in the customization window that opens, click on the screensaver icon in the lower right corner.

  c. in the screen saver settings , uncheck the check box labeled in curriculum vitae, the logon screen.
  d. click apply and then click OK.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• How to disable the password screen when the computer is not used for a few minutes

  original title: password problems

  How can I stop my computer from ebb to needing a password, if not used for a few minutes

  Right-click your desktop image and select Customize,

  Click on the link at the bottom right, screen saver

  Uncheck the underlined

  

• When I select the 'file' menu InDesign crashes for a few minutes. Before he did it just started the program, always maintaining it.

  InDesign DC update 2015 2015, 1-build 11.1.0.122. (ugrade18 September 2015)

  When I select the 'file' menu InDesign crashes

  for a few minutes.

  Before he did it just started the program, always maintaining it.

  Qualquno had the same problem?

  How do solve you?

  Open preferences and in the file management section, set the number of recent files to display to 0.

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all

  When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all, the homepage remains open, but the other page start for no reason at all in another tab

  It's very consistent, he arrives a few minutes? In this case, I suggest this test:

  To find out if one of your extensions is the culprit, could you test mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.