Traffic that overlap on the device with the power of fire

Similar Questions

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• ASA with the power of fire, no need for the license of botnet?

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  See you soon

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  Double - answered in the other display.

• Installation of the power of fire

  Hey everybody

  I also ordered the firepower for my 5555-X and recived an SSD and a number of PAK.

  I think I heard somewhere that I need two 120SSD disks, I have one. Is this enough?

  And what is the correct order:

  1 stop/uninstall old IPS

  2. Insert the SSD

  3 reload

  4. install the power of fire

  Thanx

  J.

  5555-X is designed to be used with two SSDS in a RAID 1 array.

  It will work with one but will not have a RAID protection.

  (edit - corrected the Raid type to '1').

• facets that overlap of the 'top' and 'Center' of panelStretchLayout

  Hi experts,

  I'm trying to get a provision that looks something like this:

  

  It is what is actually rendered:

  

  This is the layout code I use:

  <af:panelStretchLayout id="pt_psl1">
      <f:facet name="top">                
          <af:panelGroupLayout id="pgl_top" styleClass="header">
              <div class="logo">
              .
              .
              .
              </div>
              
              <div class="searchBox">
              .
              .
              .
              </div>
              
              <div class="userPic">
              .
              .
              .
              </div>
          </af:panelGroupLayout>    
      </f:facet>
    
      <f:facet name="center">
          <af:panelGroupLayout id="pt_pgl2" styleClass="postHeaderDiv">
              <af:panelSplitter id="pt_ps1">
                  <f:facet name="first">
                      <h:outputFormat value="outputFormat1" id="pt_of1"/>
                  </f:facet>
                  <f:facet name="second">
                      <h:outputFormat value="outputFormat2" id="pt_of2"/>
                  </f:facet>
              </af:panelSplitter>
          </af:panelGroupLayout>
      </f:facet>
  </af:panelStretchLayout>
  

  The problem is that the 'Centre' facet seems to be to fit in the 'top' side and a height of 50px line alongside the ' overlfow: hidden ' property prevents the content of the facet 'Center' to appear on the page. Further investigation of the HTML rendering, I found the following:

  

  I do not understand why my content of 'Center' facet becomes a child of the facet "on" while it should have been outside the 'top' facet Is there something wrong in my template tag?

  Ashish thanks for the reply. Definition of height and width properties did not help either. But I managed to find the culprit. It was an unclosed div that was causing the problem. It was pretty silly of me

• Fire power User Agent is unable to connect with the power of fire management center

  Hi Cisco supports,

  I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

  My Version of power of fire management centre is 6.0.0.1

  and my 2.3 10 User Agent

  Hello

  You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

  You can capture packets on FMC cli and check if traffic reaches here.

  > tcpdump-i eth0 port 3306

• Cisco ASA with the power of fire vs Cisco IPS Appliance

  Hello

  Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

  Thank you very much!

  Kind regards

  David

  Hello team,

  The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

  Rate of good will if this post helps you.

  Concerning
  Jetsy

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• What happens when the power of fire ASA subscription expires?

  What happens when ASA FirePowers subscription expires?

  What happens with the ASA? services continue to work? show an alarm?

  Thank you!

  Jorge

  If fire power module ("sfr") is more associated with a current license, policies applied by the management centre Firesight (CMF) will have no effect and you will not update in the event logs. FMC will warn you that your license (s) is expired assuming that you have a properly applied health strategy.

  The ASA base will continue to operate as usual. The redirection of traffic through service in the sfr module strategy will be largely ineffective.

• the power of fire IPS rules

  Dear,

  Please find the attached screenshot for an example, there are many disabled bydefault rules how do I know that I need to enable to avoid any attack on the network.

  Thank you

  Hi Jack,

  Yes its safer, but I suggest you make sure you that there are not too many rules permitted there also have a performance impact. All the tests on the device of firepower is using the policy of security and connectivity of balance. So using the connectivity security increases the load on the system.

  But as long as traffic isn't oversubscription the device, it should be ok.

• What is the power of fire? is the hardware modules? is a software? is allowed?

  Dear all,

  I am newbie to firepower.

  My client uses ASA 5512-X WITHOUT firepower, they want to use something like function UTM.

  I have googled and find the firepower may be good choice.

  But I didn't not firepower is hardware modules? or software? or I have to buy an additional license?

  THX

  Hello team,

  You can integrate ASA with firepower. Firepower of the hardware and software modules are available. You can integrate the power of light software with ASA 5512.To module manage the fire power modules, you can use Firesight Center (virtual and hardware) management. To manage the power modules of fire, which you need a minimum of Protection and control of license and you need to buy separately to the Cisco team the global license.

  Here are some links for reference.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/5407/Relnotes/fi...

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/firepower-mo...

  Rate and correct mark if the post will help you

  Concerning

  Jetsy

• HP 5200 - print all of the pages that overlap on the first page

  I'm having a problem with one of my users while trying to print on our 5200 s HP.

  This just started happening today and not affect any other users who also use printers.

  When the user prints a document of several pages, it prints all the pages on a single page with all the text overlapping. Here is what I tried so far to fix it, nothing helps:

  -Other models HP print very well

  -Other profiles on the same PC with the same problem

  -J' changed the processor to "Winprint" - no luck

  -Update the driver does not

  -Remove the checkbox for 'Enable advanced features' doesn't fix it.

  -J' removed all traces of the printer in the registry and it still does the same thing.

  Help, please!

  It seems that if I use the 64-bit of Windows xp for the printer driver it solves the problem.

  Thanks for nothing, everybody.

• Tunnel from site to site VPN that overlap within the network

  Hi all

  I need to connect 2 networks via a tunnel VPN site to site. On the one hand, there is a 506th PIX by the termination of the VPN. The other side, I'm not too sure yet.

  However, what I know, is that both sides of the tunnel using the exact same IP subnet 192.168.1.0/24.

  This creates a problem when I need to define the Routing and the others when it comes to VPN and what traffic should be secure etc.

  However, read a lot for the review of CERT. Adv. Cisco PIX and noticed that outside NAT can solve my 'small' problem.

  That's all it is said, but I'd really like to see an example of configuration of this or hear from someone who has implemented it.

  Anyone?

  Steffen

  How is it then?

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800949f1.shtml

• I adjusted the height of the message pane, and now it will not pass (and contains text that overlap in the folders pane!)

  I adjusted the height of the message pane, and now it will not move. Overlaps the text in the files pane, and it is making it really hard see my messages correctly. I tried to uninstall Thunderbird, and reinstall, but the problem is still there. Help!

  Have you tried restarting your computer?

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD