Basic Test Lab Configuration Guides: Windows Server

Similar Questions

• D20 problem of configuration of Windows Server 2008 R2 / 1 x SATA HD / 4 x SATA SSD

  Hi all

  I have a Mod D20. 4155 and want to use next to it is by default SATA HDD SATA SSD four disks of virtual machines. Windows Server 2008 R2 will be the OS with the use of its Hyper-V features.

  I have Aproblem with detection of drives in the configuration of the operating system. All 5 disks are visible in the Marvell controller BIOS setup. It is possible to configure a RAID on the SSD, etc, but I don't "see" any disk in the configuration of the operating system. I tried to load additional drivers in the part of the Setup utility GUI, but it did not work. I tried with the driver Marcell SAS and Intel Matrix driver, both located at http://www-307.ibm.com/pc/support/site.wss/migr-72280.html.

  Suggestions for the BIOS of the PC / BIOS Marvell / OS installation configurations?

  Best regards, Chrischmi

  Hi all

  I found the solution myself. After detection, the default drive is a SATA drive (and), I got the idea to test it on the Intel SATA controller. It was possible to install the spirit of the machine the disks attached to the Intel controller. After installation, I went to Device Manager and installed the driver of Lenovo Marvell, rekindled the Marvell controller disk and started the. Successfully. Yes!

  On my way to the solution, I had another problem: in the setup of Windows GUI part, I got an error of 0 x 80300001 with Lenovo's Intel SATA driver. It was not possible to install windows Server on the SATA drive with reason0x80300001. very helpful post, Microsoft! (-) I decided to use the default Microsoft for the Intel SATA controller driver after a reboot. Installer executed well, but ended with an error 0 x 80070017 and problems of copy of (unknown) files. The solution (found after a few hours...) was to burn a new installation of Windows Server DVD. I don't want to talk about it anymore...

  -Christoph

• Configuration VPN windows server 2012 essencial

  What policy I need to add in the game until I will configure the VPN in windows server 2012 essential? because when I install the remote access roles I received a message when done that mention me politics. later I activate access and remote access and I can't access the internet, I disable access and remote access to I can connect to internet from my server.

  There is no forums for Windows Server community.  Windows Server forums are on the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

• Configuration of Windows Server 2012

  Hello, I tried to configure Windows Server 2012 using vcac using vCenter. Clonening works, customizing of comments has started, but the virtual machine is often, so he needs a manual restart. That is documented in article kb 2048394 and 20373666. However Windows Server 2012 isn't a guest operating system supported according to the vcac matrix. I also noticed it is possible to install the agent of comments, but it does not call. So I wonder when Windows server 2012 will be fully supported and if there is a way to get comments running agent? Cheers, Thomas

  Hi Thomas,

  We will fully support Server 2012 as a guest in our version 5.2 operating system (scheduled for GA daily now).

  Dave

• ASM Configuration on Windows Server 2003

  Hi all
  
  My Version of DB: 10.2.0
  OS version: Windows Server 2003
  
  I try to configure ASM on stand-alone server using DBCA, but when I try to start OCSS by running the batch localconfig file it does not work.
  
  
  Is someone can you please tell me where I am wrong

  SQL > create diskgroup data external redundancy disk
  2 'I:\ASMDISKS\ DISK1. "
  3 'I:\ASMDISKS\ DISK2.
  4 'I:\ASMDISKS\ DISK3 ';
  create diskgroup data external redundancy disk

  Maybe you caught ;-), looks like there's space between ASMDISKS and DISKn .

  Correct it and create it again. post if no errors.

• Authentication failure - 5505 8.3 configuration to windows server RAIDUS vpn client

  Hello

  I'm trying to put up a 5505 (8.3 running) so that I can use vpn client through the RADIUS authentication

  I set up a new local RAIDUS windows box and used the ASDM Assistant and a few other installation guides the 5505.

  I get the following error:

  INFO: Attempt to <10.0.0.92>IP address authentication test (timeout: 12 seconds)

  ERROR: Authentication rejected: failure of the AAA

  any help would be greatly appreciated

  Here is my config sanitized:

  lit5505-02 # sh run

  : Saved

  :

  ASA Version 8.3 (1)

  !

  hostname lit5505-02

  no names

  !

  interface Vlan1

  nameif inside

  security-level 100

  10.0.0.100 IP address 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  banner motd ****************************************

  Banner motd No. unauthorized access is allowed

  banner motd ****************************************

  passive FTP mode

  DNS server-group DefaultDNS

  domain name

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  object network lotus_notes

  host 10.0.0.3

  network sonicwall_ssl_2000 object

  Home 10.0.0.12

  network of the NETWORK_OBJ_10.0.0.0_24 object

  10.0.0.0 subnet 255.255.255.0

  network of the ABD_LAN object

  10.7.0.0 subnet 255.255.0.0

  network of the LIT_LAN object

  10.0.0.0 subnet 255.255.0.0

  network of the LIT_LAN_vlan101 object

  subnet 10.0.1.0 255.255.255.0

  network of the LIT_LAN_vlan102 object

  10.0.2.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan103 object

  subnet 10.0.3.0 255.255.255.0

  network of the LIT_LAN_vlan104 object

  10.0.4.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan105 object

  10.0.5.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan106 object

  10.0.6.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan109 object

  10.0.9.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan112 object

  10.0.112.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan114 object

  10.0.114.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan120 object

  10.0.20.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan121 object

  10.0.21.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan100 object

  10.0.0.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan107 object

  10.0.7.0 subnet 255.255.255.0

  network of the LIT_LAN_vlan108 object

  10.0.8.0 subnet 255.255.255.0

  network of the BER_vlan1 object

  subnet 10.8.0.0 255.255.255.0

  the LIT_VLANS object-group network

  network-object, object LIT_LAN_vlan100

  network-object, object LIT_LAN_vlan101

  network-object, object LIT_LAN_vlan102

  network-object, object LIT_LAN_vlan103

  network-object, object LIT_LAN_vlan104

  network-object, object LIT_LAN_vlan105

  network-object, object LIT_LAN_vlan106

  network-object, object LIT_LAN_vlan107

  network-object, object LIT_LAN_vlan108

  network-object, object LIT_LAN_vlan109

  network-object, object LIT_LAN_vlan112

  network-object, object LIT_LAN_vlan114

  network-object, object LIT_LAN_vlan120

  network-object, object LIT_LAN_vlan121

  the BER_VLANS object-group network

  network-object, object BER_vlan1

  access list off - in extended permit icmp any one

  out-in access-list extended permit tcp any object sonicwall_ssl_2000 eq https

  access-list out-in extended permit tcp any eq smtp lotus_notes object

  access list-based ip allowed any one

  outside_1_cryptomap list extended access permitted ip LIT_VLANS object ABD_LAN object-group

  outside_2_cryptomap list extended access permitted ip object-group LIT_VLANS-group of objects BER_VLANS

  pager lines 24

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source ABD_LAN ABD_LAN

  NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source BER_VLANS BER_VLANS

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  object network lotus_notes

  Static NAT (indoor, outdoor)

  network sonicwall_ssl_2000 object

  Static NAT (indoor, outdoor)

  Access-group all-out in the interface inside

  out-in access-group in external interface

  Route outside 0.0.0.0 0.0.0.0

  Route inside 10.0.1.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.2.0 255.255.255.0 10.0.0.254 1

  Route inside between 10.0.3.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.4.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.5.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.6.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.7.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.8.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.9.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.20.0 255.255.255.0 10.0.0.254 1

  Route inside 10.0.21.0 255.255.255.0 10.0.0.254 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  RADIUS protocol AAA-server litvms03

  litvms03 AAA-server (inside) host 10.0.0.92

  key *.

  RADIUS-common-pw *.

  the ssh LOCAL console AAA authentication

  Enable http server

  http 10.0.0.0 255.255.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set pfs Group1

  map 1 set outside_map crypto peer

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  card crypto outside_map 2 match address outside_2_cryptomap

  card crypto outside_map 2 pfs Group1 set

  card crypto outside_map 2 defined peer

  card crypto outside_map 2 game of transformation-ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  No encryption isakmp nat-traversal

  Telnet timeout 5

  SSH 10.0.0.0 255.255.0.0 inside

  SSH 10.7.0.0 255.255.0.0 inside

  SSH timeout 5

  SSH version 2

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  NTP server 216.14.98.234 prefer external source

  NTP server 204.15.208.61 prefer external source

  WebVPN

  internal jdr_littleport_employee_vpn group policy

  attributes of the strategy of group jdr_littleport_employee_vpn

  banner value

  value of 10.0.0.8 WINS server 10.100.1.141

  value of 10.0.0.8 DNS server 10.100.1.141

  Split-tunnel-policy tunnelall

  jdrcables.com value by default-field

  Split-dns value jdrcables.com

  IPv6 address pools no

  type of tunnel-group ipsec-l2l

  Tunnel ipsec-attributes group

  pre-shared key *.

  type of tunnel-group ipsec-l2l

  Tunnel ipsec-attributes group

  pre-shared key *.

  !

  !

  context of prompt hostname

  Cryptochecksum:6d1868630c83f17fe0c7de41006a1526

  : end

  Rich

  I have checked the road conditions but missed the VIRTUAL LAN address. Sorry about that.

  I'm glad to see that you solved the problem and am not surprised that the question seems to have been some incompatible in the serttings server. I think you should be able to close the thread based on your response. Give it a try.

  HTH

  Rick

• Need help with network Test lab configuration

  I have the Setup VLANS on Cisco switch (4506) and I put aside in ESX (3.5) in its own switch port, but I'm not able to get the systems on this switch to connect.  They seem not to see each other even if they are on the same subnet and the same vlan.  Ideas?

  Looks like it's maybe a configuration problem of VLAN.  On the Cisco switch is the port connected to the network test card NETWORK set up as a trunk port?  If you want to make sure it has 400 VLAN assigned to the trunk.  If it is not defined as a trunk port, you must remove the tag VLAN from your virtual switch.  If the port of Cisco is not defined as a trunk, then the Cisco switch sends tags VLAN to the vSwitch and the vSwitch is looking for packets marked as 400 and not something else by the way to the virtual machine.  Either the trunk or the vSwitch VLAN parameter will be changed to solve the communication.

  If the end goal is to have several VIRTUAL networks appear on network vSwitch test then I'd go the route set port of Cisco to the trunk.  If you just want a VLAN to appear on the vSwitch test then I would keep the port Cisco defined how it is assigned to 400 VLANS and delete reference VLAN of the vSwitch.

  Hope this helps, please give points if it was useful.

• copy of the mac to windows server data

  Hi all

  My apologies in advance if this ended up in the wrong section of the forum, hoping someone could point me in the right direction.

  I work for a company that currently stores its files on an OS X journaled NAS device, connected to a Mac Mini via the lightning cable and the mac connects to the network via ethernet.

  We are planning a migration of large data (~ 18 TB) from a NAS device mac to format, on a Windows Server (like using NetApp storage solution / VM datastore)

  I wonder what could be the best application to manage the data transfer? In Windows environments, I used Robocopy or FTP and love it, but not really know on the side of Mac of things when it comes to data migrations.

  We have a paid version of ChronoSync we use to run our nightly backups to other NAS material - I see that this has developed in a few searches on Google.

  2 other products that pop up in my research are arRsync and SuperDuper - can someone comment or recommend these products?

  That's what I look for in an application to manage the transfer:

  -support to copy the attributes of file from the MAC world to Windows

  -support the recovery if the transfer fails / break

  -being able to provide a significant peace of mind summary when the transfer is complete (sort of like ChronoSyncs connect)

  -GUI based and have a nice interface

  -Be reliable to transfer large date - currently about 18 ~ TB

  Looking forward to hearing your comments, no doubt let me know things that I have to take into consideration during the planning phase or "traps".

  Matt

  So I'm going to bite and offers some advice.  Summer by this much (sigh).

  First of all, some of the things to watch for:

  1: naming.  Mac users in storage Mac can use any character that they want: and.  For example, my.file! @# $> That's so important # $123. .    can be a file name.  Cannot * REALLY IMPORTANT FILE!  Yes, there are spaces in the and at the end.  Yes, this will make panic window.  You need to do a review of the names of files and folders before you try to migrate.  Search for files that begin and end with the space character.  Beware reserved characters in Windows.  Clean your name prior to migration.  For more information, see here https://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx

  2: maximum length of the path.  Yes.  In this day of unicode several parts of Windows can only manage a path of the file system maximum of 256 characters.  See the link above.  If you arrive by a system of support for paths longer (like OS X and * nix operating systems) that you want to review the length of your paths.  Test, test and test again with all of your tools, including your backup software.  Make sure he can see both paths that exceed the API limit and also it is able to restore data in ways that exceed the length.

  3: SMB is always a nightmare.  Numeral ID of file crawling, to slow down the reading of the directory, to Hung Finder.  Your version of Mac OS will have degrees of success.   10.8 was a mess with DFS.  10.9 was a wreck of train with Windows cluster servers.   10.10 has huge issues with ID of file enumeration and periodic deadlock.  Yet once, test in your environment.  Get comfortable with the nsmb.conf file.

  4: do not leave your sleep of Macs.  Reconnect the AFP inactive supports.  To connect to a server, let mac sleep, wake can renegotiate the connection with the server (generally) volume.  SMB does not.  If your Mac to sleep with documents open on the part of the SMB, you are in a world of pain.

  5: Be prepared to not be able to find anything.  Research on the shared Windows resources has been a frustrating situation.  You will have taken in charge of Spotlight from the server so that you can use a directory to search like Find Any File trawling or be ready to manage Spotlight index on each workstation and hope for the best.

  Regarding the methods to get the data from one place to another, you must realize that there is a time constraint.  Using a 4 GB/min of transfer GigE, assuming that no problem and rule without interruptions, 18 TB of data will be 75 hours to copy.  Now, since it is a SAR passes to a Windows system, you probably won't get 4 GB/min so increase this number by 20%.  If the Windows Server on writing virus scanning, add another 10%.  If possible, the best advice I can give you is to do it in logical blocks.  Now, I don't know your data set, so this is not possible.  However, if you have several shares, move an action by end of week to ensure you have enough time to perform the copy and also to correct problems that may occur.

  About the tools, I have always used rsync because it allows the two detailed logging and works also in additional line.  Should we get disturbed for any reason, you can pick up where you left off.  Unfortunately, this isn't based GUI.  Also, the rsync 2.6.3 included with OS X is not sufficient to support all the features of file system.  I prefer to build a copy of the last branch 3.  I'll also include some of the patches as indicators of file and compression of hfs.  If it's just data, the patches may not be necessary.  If you need a GUI tool, CronoSync is correct.

  And finally, if you find that SMB on Windows is just too frustrating, there's Acronis access connect.  It is a supplement to the Windows Server native AFP and Spotlight.  Over the past years, I was faced with questions SMB through many versions of Mac OS X.  Of course, several questions are in corporate environments where I have no visibility to the configuration of Windows Server.  I have no idea what they are doing on these machines, but I don't know that OS X integration was harsh.

  I hope this helps.  Good luck in your project.  Test and test even more before putting forward your end-users.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Customers light rdp to windows server 2012

  Hello

  I have a client with a Windows Server 2003 32-bit server acting as a mail server & DC, but also make nightly backups.

  Users run desktop computers as well as laptops at the office, with some of them (sometimes) connect to the network from remote locations.

  I am currently looking at upgrading their environment, in upgrading the server to 64-bit Windows 2012 and add Thin Clients for desktop users, so they can connect directly to the server that will help reduce overhead costs (such as the failure of HARD drive on desktop computers).

  The question I have is if this Setup will work? Basically, I'm interested in Windows Server 2012 Server Essentials or Standard 64-bit with the necessary amount of RDP CAL this server will run exactly as the server running from 2003, in what will be the domain controller, Exchange server & perform nightly backups. In addition to this, I want to install MS Office with the necessary quantity of licenses.
  However, I would like to know if it will work or if I am looking at a catch which will prevent users to connect to the server? Or office giving problems if Word is open for a user, it will not be open for the user to one another (the same issue with Outlook & Excel etc.)?

  If there is no potential problem that prevents this configuration to work, can someone please point out to me what will be the problem and if there is a solution?

  TIA

  Hey Wil,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  General Forum(Windows Server) Technet

  Hope this information helps.

• VB6 DLL is not log messages in the Windows Server 2003 event log when it is called from an ASP page

  Hi all

  I have an ASP web application, I will create a "VBModule1" (VB6 Dll) instance of an ASP page and inside this method of "VBModule1" I create an instance of another VB6 Dll 'VBLogger', who calls App.LogEvent () to write messages to the event log.

  I tested the Web application on the develepoment (XP) machine and everything worked fine but when the user runs the Web application on the Production Server (windows server 2003) events are not saved.

  Friend missing the security settings of my ASP web app that needs to be configured on Windows Server 2003 for VB6 DLLs logging events?

  Please think as soon as POSSIBLE.

  IIS on Windows server 20003 version: 6.0

  Thank you.

  Hello

  The question you have posted is related to Windows Server 2003 would be better suited to the Windows Server community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Installation of Windows Server 2012 problem

  I tried with different configurations, install Windows Server 2012 as operating system prompted but still got the error attached.
  Someone knows why?

  Hello and welcome to the communities.

  What version of VMware Player are you using?

• Where can I find the Oracle 11 g R2 binary to upgrade on Windows Server

  Hi all
  
  I m trying to test external components with Windows Server and I want to test Oracle 11 g R2.
  
  The only resource I have is this Web site and the binaries only seem to be for Linux OS.
  
  Anyone know how I can upgrade my version of Oracle 11.1.0.7 to the R2 release?
  
  Thank you
  Bertrand

  user11869477 wrote:
  Thank you people for the quick response.

  Can I get an official contact of Oracle? You have no time to support for Windows Server?

  Thank you
  Bertrand

  No information has been provided. Just visit periodically http://www.oracle.com/technology/software/products/database/index.html

• Windows Server configured as the gateway crashes with referee interface

  I'm running the Active Directory to Windows 2008 R2 servers multiple infrastructure test lab. One of the functions as a gateway server, configured with routing and remote access. Each time, after a few hours, the network to public internet traffic stops. One way to solve is, is to restart the gateway server. When network stops, same gateway itself cannot connect to the public network, the DNS servers of the ISP ping with the IP addresses is answer. Ipconfig/release and / renew buy do a thing and disabling WAN network interface freezes. After that, try to stop and restart the server will be fallow with blue screen and cold reboot.

  WAN interface uses the pilot VMNET3 and Intel LAN interface 1000 (something like that). VMtools has been installed from the console of the last version of ESXi.

  Familiar with this problem to anyone?

  Try to change the external NETWORK adapter to E1000.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• What is the hardware configuration recommended for 11 G R2 on Windows Server 2008 R2 64 bit

  We are about to move from 10 G to 11 G R2 R2. The platform provider supported for our application is Windows server 2008 R2 64-bit. I have to write a specification document to support my request for new material and I would like some guidance as to the recommended configuration. Environment development database server will have to host dev, test, and preliminary databases for a database of 10 GB. The production server will host only the production database.

  Any guidance appreciated.

  concerning

  Madre

  Hello

  It's all sorted out.

  concerning

  Madre

• Cannot configure GPIB in Windows Server 2008

  I installed the version 2.8 IEEE488 driver on a Windows Server 2008 computer.  I have successfully added a GPIB-ENET under Measurmeent and Automation Explorer interface; However, he does allow me to change the configuration of the interface.  I get the message "the GPIB Interface Properties cannot be changed by an administrator" in the status bar.  I am the administrator for this computer group.  Does anyone have any suggestions?  Is there a different usergroup that I need her?  File permissions need to be addressed?  Is there another configuration setting that I need to do?

  I solved the problem.  Run as administrator.  Not enough coffee this morning.