Batch save for Web with sRGB

Similar Questions

• How batch save for web to 100 k

  In Photoshop Creative cloud, how to create an action where I batch optimize large groups of images, when you set the size of file (100 KB) rather than set the quality slider? Here are the steps we follow to a single image. How can I automate this process for effectiveness?

  Starting with an image that is 1500 x 1500 px px and 72 dpi, we go to save for Web in JPEG format. Then we change the quality slider until the size of the file indicates 100 k (give or take a bit) in the lower left corner. Then save it.

  I tried clicking on the drop down menu in the top right corner to 'optimize for file size... '. ", then setting that 100 k, but I get inconsistent results because it seems that the action that I create retains the quality on everything that worked for the image I used to create the action. I need to this quality slider should be set to whatever makes the image 100 k.

  Any ideas?

  Hi michelleb68019062,

  • File/save for web
  • Choose under predefined "jpeg".
  • Next to it is a small arrow to the right, click on this and an option will come "to optimize the size of the file.

  Choose 100 k

  • It will create of fairly low quality JPEGs - maybe you want to downsample them as another step

  Kind regards

  Tanuj

• How to 'save for web' with information from a dataset

  I created psd to design web page set up with a master image.  The main image is defined as a pixel replacement variable and uses a dataset to load in images of a local folder.  I have more than 100 images in this folder and I need to resize the image to 250 pixels wide and "save for web".   Resizing and registration is easy with an action, but the thing, it's that I need to use a different column in my DataSet as the name of the saved files.

  Is it possible to create an action that will loop through each row in my dataset, do the replacement of pixel on the image, enter the name of the file in the next column, flatten & resize the image and then save it as the file name?  Of course, would cancel the flattening and resizing to start on the next line.

  I guess I could break in two actions.  One who reads the dataset, to replace the pixels and export for the web with the new file name.  Then I could set up a second action to run in batch on the folder that contains the images recently exported and just resize all the.

  I don't know how (if it is even possible) is to loop through the dataset by using the action, get the variable of the object dataset for file name and export for the web with that name.  Any ideas?  Thank you.

  Here's a function I use. With this function, you can import a CSV dataset to your document. Get names of groups of data csv form. Then in a loop applies a set of data by name, and then save as in any format you like. The loop repeats until all sets of data are processed.

  fileImportDataSets = function( file ) {
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putClass( stringIDToTypeID( "dataSetClass" ) );
      desc.putReference( charIDToTypeID( "null" ), ref );
      desc.putPath( charIDToTypeID( "Usng" ), new File( file ) );
      desc.putEnumerated( charIDToTypeID( "Encd" ), stringIDToTypeID( "dataSetEncoding" ), stringIDToTypeID( "dataSetEncodingAuto" ) );
      desc.putBoolean( stringIDToTypeID( "eraseAll" ), true );
      desc.putBoolean( stringIDToTypeID( "useFirstColumn" ), true );
  executeAction( stringIDToTypeID( "importDataSets" ), desc, DialogModes.NO );
  };
  function applyDataSet(setName);{
      var desc = new ActionDescriptor();
          var setRef = new ActionReference();
          setRef.putName( stringIDToTypeID( "dataSetClass" ), setName );
      desc.putReference( charIDToTypeID( "null" ), setRef );
  executeAction( charIDToTypeID( "Aply" ), desc, DialogModes.NO );
  };
  function getDataSetNames(csvFileRef) {
      _ftn = function(string){
      var csvItems = string.split(",");
      datasetName = csvItems[0]
      return datasetName;
  };
  csvFileRef.open();
  var datasetArray = new Array();
  var i = 0;// assumes the dataSet name is the first field
  while (csvString = csvFileRef.readln()) {
     if (csvString.length < 2) continue; // Skip empty lines
    datasetArray[i] = _ftn(csvString);
    i++;
  }
  csvFileRef.close();
  return datasetArray;
  } 
  
  //sample usage
  var csvFileRef = File.openDialog("Please select CSV file");
  var datasetNames = getDataSetNames(csvFileRef);
  alert(datasetNames.length-1);//number of data sets
  alert(datasetNames[1]);// first data set name
  

• When you use "Save for Web" with slices, it puts the images exported to a/images folder. Can I turn that off?

  I don't want to create a new folder/images every time I export images. I just want to export directly into the folder I specified.

  Is it possible to change this? I could not find a way.

  Thank you!

  In the save for Web dialog go to the dropdown menu, click change output settings and under saving files, uncheck the Set of Images in the folder

  

• Shares of CS5 how to insert 'save for web' item of menu with break

  Hello

  I did a simple crop, resize, sharpen action today, but when I added the registration for the web stage that I couldn't work out how to get a break to allow the user to manually insert a file name change prior to registration does not happen. On the contrary, upon registration of the action, it seems I can only insert the item of menu Save for web with step registration enabled. To then change the name of the file, I need to go to the directory and rename the file manually.

  I wish that my action to make a break in the save for web window and devices so that I can make the change file name, tweaking the compression settings and sometimes change the type of file (for example the png or gif rather than jpg)... and then save.

  Probably very simple to make...

  When you save your action, instead of

  Insert the menu item to save for web,

  Use save for web and save a picture.

  Then in the Panel actions, turn on the toggle dialog box.

  Now, when the action is played, recording the web dialog box will open

  and you can change the settings.

  

  MTSTUNER

• Save for Web action CC 2015

  Hello

  I just created an Action to help with batch save images for the web. I have several hundred photos I need to reduce and put on a Web site.

  • I can go through the process manually and everything works fine.
  • I created an action, according to the manual process, and it does not work.
  • I also tried to run the action as a batch command and I get the error message "does not recognize the Export command.  I understand that it is obvious that the action does not work, but I thought I would try it anyway.

  Someone had problems with the creation of an action or with batch save for Web and how did you get around it if you please.

  Thank you

  George

  I'm on Win 10. Where do you work, do not forget this: when measures registration do not change the file name when recording and save to the folder where you want to save the files when batch processing option because: Override Action "save under" commands will not work for the reason that you do not save (command) step in your action.

• production batch Photoshop - issues with 'save for web '.

  Hello

  I'm having a problem with "save for web" on a lot. I have just spent the last 2 hours searching the web and this forum and although the question is addressed, threading or suddenly go in another direction, end, or I just can't give a sense of the answers given.

  I have 350 images I want to resize the thumbnails and then save it to the web. 2 hours ago, this seemed to be a 5 minute job.

  I create an action called "batch_thumbnail" and press "Record."

  I then select 'File' > 'Open' and select an image to open the dialog box.

  I then select 'Image' > 'Image size' and resize the image to the size of the thumbnail (200 x 125) and press 'OK '.

  I then select 'File' > 'Save for Web and devices', set my optimization settings and press "Save".

  Using the dialog box that opens, I navigate to a pre-created directory called "thumbs" and press "Save".

  I then select 'File' > 'Close' and on the dialog box that opens, I select 'don't save '.

  I then stop the Save action.

  So far so good.

  I then select 'File' > 'Automaton' > 'batch... ". "and the dialog box is displayed.

  I select my action to the 'Action' of the menu drop down.

  In "Source", I put the drop down "File" menu, select "Choose" and select target directory with my 350 images in.

  In 'Destination', I put the drop down "File" menu, select 'Choose' and select the target (inches) directory, where I wish to record the inches.

  "File name' I leave the first box under"name of document", set the seconds to"_thumb"and the third"extended. "

  I then click 'OK '.

  And that's where the problem starts. Everything works fine until he tries to save the second image. I can see what is happening, as the directory name path and image that are used while setting up the SFW action part, get into hard action. So each resulting image is saved in the same file, instead of being substituted by the "File Naming" settings.

  I tried selecting "Override action"Save"commands", but it makes no difference. It is actually possible batch to produce files using "save for Web and devices '?

  See you soon,.

  James

  First of all, unless you have a compelling reason to record a "Open" command, you should not...

  In addition, since save it for Web is an export command, THIS command is your backup... you don't want to select a destination because the destination is already stored in the save for Web.

  You want to save a close without saving... otherwise all 350 images will eventually be opened in Photoshop, after the batch is executed.

• Batch Export "Save for Web" without stopping... Please, I beg you.

  I have about 500 files in a single folder that I want to batch export to «Save for Web...» "high quality to another single folder, without having to stop for me to choose the folder for each file...

  How do I do that?

  Photoshop CS3 10.0.1 for Mac

  Sorry about that, PS - Scipts.com holds hundreds of scripts for Photoshop and Bridge, unfortunately it is not possible to write a full how to install with each script.

  The jsx file must be placed in the following folder: -.

  / Applications/Adobe Photoshop CS #/ presets/Scripts settings
  If Photoshop is open, close and restart so that Photoshop sees the new script.

  To use File - Scripts - picture Processor

  It should be pretty esay to follow the dialog on the screen there.

  Hope it works ok for you.

  P.S. I will download a new version soon that supports the addition of a logo/text and keep the same relative size, no matter what the size of the document is.

• Problem with save for Web in Action

  We do hundreds of images to our fine print main client. As part of the work, they want to the final image through save for Web registered as file a .jpg and .png to 1000 pixels wide.

  The problem is, if you try to create an action for this, the size of the action records is a percentage and not a width in pixels. It is therefore impossible (so it seems) to record an action that sets the scale as a sizing with a fixed output of 1000 pixels wide. Since images vary in size and he insists on registration of the size as a percentage, you can not create an action that will work.

  I tried to see if there is a way to change the action to change the output of a width in pixels, but didn't see how to do it. Is it still possible? We would save TONS of not having to manually open each image twice as much work and savings for each format.

  Yes, there is a bug with this script.

  The bug got into CS5 and was not attached to the CS6.

  You can download the fixed script here...

  http://www.PS-scripts.com/BB/viewtopic.php?f=10&t=3370

• Remove the Exif data with using "save for Web".

  I have very large files.  I need to remove the EXIF thw.  I don't want to not use "save for web", because its impact on the quality and size (recompresses) files.  I need the files remain Nations United has changed with the exception of the removal of the EXIF data.

  I have a large number of files to do this to.

  Can anyone help?

  Thank you

  I'm not messing around with PS more for that matter...  3.6 Lightroom it in one easy step.  Without messing with additional TIFF files or to back up several files or Actions.

  YES!

• When the batch of save for Web, Illustrator also records the .ai file copy

  This question has been asked and abonadoned here, so I write because it also happens to me.

  CS4 and CS5 (I tried both), Mac OS 10.6

  1. I select action 'Save for Web PNG', which is part of the package by default, and select "batch".

  2. I choose a source folder and choose a destination folder and check "Override Action"Save"commands."

  3 illustrator then performs the backup of Web action, but puts the .png files in the destination of origin specified in the action. It also puts copies of .ai files in the destination folder, I have created and specified in the batch dialog box.

  I want the .png files in my folder, and I don't want copies of .ai files.

  Pulling my hair out on this one, go to lunch. Thanks in advance for any help

  See screenshot below. Should do what you want.

  

• The file size huge with save for Web, but an excerpt is ok

  Hello

  I Googled, but not found anything about this but I have the same problem on my computer and also on colleagues from computer so it seems that it should not be completely unknown.

  That's what I do

  1 open an eps file, the logo of a single color, the 72 dpi, size 110 x 21

  2 save for web

  3. Select png-24 format. Said overview file size ~1.3 kB

  4 save-> actual size of the file on disk is 4 k (IE 3 times larger than it should be)

  5 preview and click right then in the browser + save the image under gives correct the size of the file (on my colleagues computer, this does not work, it always receives the right size)

  I also tried with gif and various settings, etc. image sizes and the result is the same.

  I use Windows Vista 32-bit and Photoshop CS4.

  Is this a known issue?

  Thank you

  so this is the metadata that are added, if you set the drop-down list of metadata to zero, you should get more small files

• Unable to save a slice with the original size using save for Web

  Hello

  For some odd reason, I can't increase the percentage more 45.84% in the section of the dialog Web Image size, save for

  so whenever I have save a slice, it ends up to half the original size.

  

  I remember ever change a setting that can get there... How Photoshop could prevent you to save your image in original size?

  Please help me. I manage to get the slice in the original size now to meet the deadline for my project.

  As far as I know, photoshop for the web economy imposes a limit of size about 8182 pixels height or width and if the range or image is larger, save for web shows that the image/slice has been resized.

  The strange part is if is not a click on one of the options the Image size, the image/slice seems to be saved in the original format, even if it is greater than 8192 pixels in height or width.

• My picture if you go full screen has white particles everywhere. I don't see it until I save for web. [was: need help with an image]

  Self-adhesive transparent GIF - find and share on GIPHY

  My picture if you go full screen has white particles everywhere. I don't see it until I save for web. No idea how to solve this problem? I've never had this problem before.

  This article gives to think the matte color change Transparent gif in Photoshop tutorial - PhotoshopCAFE

  See if that helps.

• help - problem with save for web when jpg image is placed in the file

  I have a jpg image file that I placed in my Illustrator 5 file to use as background and then created several vector buttons on the top.  When I try to create an arboard around a single button and then save it to the web, it ignores the size of the artboard and shows the dimensions of all jpg.  If I create the same file without the background jpg image, I am able to use work plans to record only a single button.  Every time I place a jpg image in my Illustrator file and try to use work plans, work plans are ignored and the entire area of the jpg is saved.  I am able to use the tool cuts to the economy, but I prefer using work plans.  Anyone have any suggestions on how to get the work plans of work when a jpg is placed in the file?  Thank you.

  In save for Web, the tab Image... is Crop to the artboard checked?