Battery clip and 2 GB of storage

It's no big deal I guess and I'm sorry if it has been said before, but I have two minor issues with my new Clip.

When it is plugged into my laptop and I look at properties 'internal memory', he said that the total capacity is 1.8 GB instead of 2.

Also, when I look at the properties of "Sansa Clip 2 GB", he says that the battery is 78% charged even after 3 hours. Let it load for another hour, but it still says 78%.

I wonder if this is normal or if I have a duff one.

Other than that, although I am impressed by it.

DARCAL wrote:

It's no big deal I guess and I'm sorry if it has been said before, but I have two minor issues with my new Clip.

When it is plugged into my laptop and I look at properties 'internal memory', he said that the total capacity is 1.8 GB instead of 2.

Also, when I look at the properties of "Sansa Clip 2 GB", he says that the battery is 78% charged even after 3 hours. Let it load for another hour, but it still says 78%.

I wonder if this is normal or if I have a duff one.

Other than that, although I am impressed by it.

1.8 GB sounds just as with hard disks and flash drives and things of CD and DVD are calculated from base 2.   1 KB = 1024 bytes = 1024K to 1 M 1 GB = 1024 MB.     1.8 GB = 1.93 billion bytes.  There is little space used by the Firmware and a database used by the player.

If you format before you add your own songs, you can make and delete Freebee songs that were on the player.  Then reload your own music.

When you check your battery, voltage of the clip (turn off the video, wait a second, turn on the clip) and check.   Go to settings > system information > % of power

If this power is 78%...   Then try to load the video adapter or the ports on the back of your computer.   It is possible that the voltage of your USB port is not sufficient, or an indication of the clip is not properly read the power or battery clips is lower than expected.

All my clips were able to load to 100% (but always check on the clip) not through windows Explorer/properties...

Tags: SanDisk Sansa

Similar Questions

  • Questions on Clip + and (Clip + vs Fuze) Fuze

    Hello

    I'm going to buy a 8 GB Clip + or Fuze 4 GB, and 8 GB microSD. I read a lot of Clip + vs Fuze subjects, a lot of comments, but it won't get me anywhere, I'm still not sure that one would be better for me. You would help me a lot if you answered my questions. Even if it's subforum Clip +, and I assume most of you have Clip + or it's your favorite, please be fair with me on both players.

    (1) who has the better battery life? How it will change over the years? What happens if I listen to mostly FLAC?

    (2) that best understood earplugs?

    (3) do rockboxed Fuze sounds better than rockboxed Clip +? I heard that the rocket gets better EQ.

    (4) a port USB owner fuze. Does this mean I have to buy something more to connect it to the pc?

    (5) I saw the comments from users on both players in the review of the comments. There were many people who were not satisfied with the rocket because "it does not work, will not connect to the pc, I got white screen" etc. etc. when nobody said something like that on Clip +. " Is Fuze very much likely to get in the mess or is it just because more tech newbs like rocket?

    (6) I'm listening to binaural beats. Fuze and Clip + with caps default enough for this task? (the question is probably for those who also listen to binaural beats)

    (7) what (V1, V2) version of both players is better and why? How to know the version of the player before buy you? Can all be rockboxed?

    (8) this wall charger will be ok with rocket or Clip +? http:// www.acme.eu/en/Catalog/chargers_and_rechargeable_batteries/battery_chargers/acme_charger_ak03_for_mp...

    (9) Fuze 4 GB or 8 GB Clip + (both with 8 GB microSD)?

    That's all for now. Answering these questions would probably save me many sleepless nights I have when thinking about which player to choose thank you

    PS Sorry for my English

    1 fuze has a battery more large and the greater autonomy.

    2. I think they are the same (and you have to provide your own).

    4. the cable comes with the "rocket".

    5. people always have problems with Tech - the same with Clips.

    6. you will probably get a v2 at this stage.  Rockbox is being developed for both versions.  I'm not aware that there is a difference from the point of view user between v1 and v2 - it's intestines that have changed.

    7. Yes.

    8. it depends, as always, your needs.  Wheel scroll, video, screen, battery life: Fuze.  Size, clip, factor of kindness: Clip.

  • G7-1365dx Pavilion: Battery Recall and replacement program (c05166036)

    Has received a critical Customer Advisory - June 7, 2016 E-mail from HP Support alerts.  Is email refers to a dangerous battery problem and suggests that there is a voluntary recall of these batteries.  However, when I try to follow the link, or search for one keyword in the email, anything equal or can be found on the HP website.  Please send the correct link for me or explain what is happening so that I can check my battery for safety.  Thank you

    This is the alert correct with the link below the title:

    Commercial and consumer, HP laptops - Battery Recall and replacement program (c05166036)

    http://click.EmailInfo.HP.com/?QS=3b63cd364274bd451425078ebcf03892671d619fe862d8b13a42a9dd40816b35a9...

    Products: Laptops and hybrids

    Description: In collaboration with various regulatory agencies Government, HP announced a reminder of voluntary safety around the world and the replacement program for certain laptop batteries. Affected batteries were shipped with HP, Compaq, HP ProBook, HP ENVY, Compaq Presario and HP Pavilion Notebook computers sold worldwide in March 2013 to August 2015, or were sold as accessories or spare parts or provided as replacement through Support HP.

    It works now,

    Here is the link:

    https://h30686.www3.HP.com/?lang=en-us#tab=ID1

  • Tecra R10 - 10W - CMOS battery error and the next mistake of bios password

    I have some old Tecra R10 - 10W

    Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.

    How to reset the password of the bios and is also required for cmos battery and I can do it myself?

    I thank...

    You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
    Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html

  • Unload the battery G450 and stop problem

    When this unit is operating in mode 3G as modem battery discharges and stops.
    I tried to remove and replace the battery, as is stated in the user manual, but still no results.
    Somethimes do this but not all the time.
    It is very annoing to find in the middle of a conference and stop.
    I tried to contact toshiba Romania, they said that another version of the software is under development for this device, but 5 or 6 months I did not hear anything on their part.

    Best regards!
    DG

    I do not joke with customers of Toshiba. Maybe you're on the wrong forum.
    At the top of this page says Toshiba computers support forum.
    AFAIK G450 is perhaps mp3 player or your phone, but certainly has nothing to do with computing.

    I recommend you contact your local dealer where you purchased this device and ask for help.
    If all goes well, they will be able to help you with this problem and propose the right solution.

  • Battery problems and speaker

    I have two concerns with my Toshiba NB200 netbook / 00 Q.

    1. the battery

    I always on the use of all the power connected to the AC. When I finished I turn off my computer and when I'm sure it's out I have unplug the AC plug and put away the computer. When I restart the computer I first connect the AC plug and then turn the computer back on, but the battery is always red and "load". Is this a bad battery? Why is it loads if its only source was AC? Specifically, I make sure I have press 'closed' and not hibernate or stand-by.

    2. speakers

    Does anyone else have this problem where, without a helmet, speakers tend to seem stronger on the right and it is very difficult to hear whatever it is on the left. I checked the realtek and volume settings, but the speakers are "centered". any help is appreciated.

    1. it will be certainly charging because he will have lost a few percentage points of full load (at least) depending on how long it has been turned off. If you have some things turned on in the BIOS as the sleep and Charge, then he will lose even more power.

    If you very well use only on AC so you should disconnect the battery completely and only connect the battery up to keep that it loaded somewhere between 40% and 60% of full load. This will prolong the life of your battery.

    I would first determine how much battery is being sold out in 24 hours when it is off, and then we can see if there is anything that can be done to reduce this amount.

  • Lenovo x 240 battery observations and investigations [trendy not supported]

    Hi, have a few observations and questions about the 240 x battery. 1 have not really noticed before, but when you plug the charger, the news of support for internal and external battery should read "connected, charge '? 2. I noticed that the mine only has 1 (internal or external) that reads "plugged in, charging" while the other is not (plugged in, do not load)-I first thought once we're in charge, another would activate and fresh, but it's apparently is not. 3 have not really found the problem, i.e. the hardware or software. Sometimes it's the internal battery that costs, sometimes it is the other - I have two defective batteries? Is this a software problem? Here are the things I have tried/tested 1. I uninstalled the device drivers in the same device, rebooted - Manager. 2. install / re-installed the driver of lenovo power manager - nada. 3 tried to recharge the laptop while it is off - voltage and both got fully charged! Someone has the same problem? appreciate the advise / help and thanks in advance.

    Hello

    Thanks for the reply and my apologies for the late reply.

    Took the time to observe the laptop, but I guess I found my answer.

    It seems that the laptop is not simultaneous battery internal and external. Noticed it imposes outside first, then residents. Looks like that's how it really works. Fortunately for me not to send my laptop warranty or buy a spare battery.

    Thanks again and happy to be part of the community of Lenovo.

    See you soon and good new year!

  • HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

    Hello

    My HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

    I always thought that this laptop can't run then 1 hour unplugged but still ran about 30-45 minutes before the battery is discharged (recommended HP). A few days ago I received this message when starting upwards:

    Main battery

    Failure ID-U360G0-000624-XD0002J-C0DL03

    Product ID-WQ685UA #ABA

    Replace the main battery.

    So here I am. How do I get a new battery, sent me? Thank you!

    Hello:

    It is a forum of consumer to consumer.

    Nobody here help you with warranty issues.

    You will have to contact HP support support.

    Contact HP on the link below for the country you live.  Select the option 'technical support after purchase.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    Paul

  • White letters/name of the file is displayed in the lower left side of the video clip and photo in my Windows Movie Maker slideshow

    This only happens to a music video and a photo.  I removed the clips and replace them again and it still happens.  I can't find a way to remove the white titles from the images.  Help?  I don't know if I have Vista or XP...

    The same letters seem if you watch the video in Windows Media Player?

    In Movie Maker - timeline view... Look at the track "Title Overlay"... If there is
    the unwanted titles here... right click / delete them.

  • Purchase of Sansa Clip and memory card

    I'm about to buy a Sansa Clip. I was planning on getting a 2 GB mp3 and the purchase of a 16 GB memory card.
    My question is, will they work together? A 16 GB card will work in a 2 GB drive? And the memory card should be SanDisk or can it be any business?

    Your help and your answers would be greatly appreciated!

    The Clip doesn't have a slot for card, only the Clip + and Clip Zip. Any size to maximum 32 GB will work. Any brand should work, but there has been reports of some brands does not not with the Zip model. That was supposed to be addressed in an update of the firmware, but to play in the trunk, I'd buy a SanDisk brand.

    And you can consider getting a larger capacity of 2 GB player. The extra cost is not much, and this extra room will be useful. Music libraries tend to develop, especially now that you have a cool gadget little listening to load them on.

  • Updated my new Clip and all the music is gone

    I just updated my 8 GB, to the 2.01.32 clip, and then all of the music has disappeared off the coast of the gripper, but when it has been connected to Rhapsody, Rhapsody said it was all there. Then when I disconnect it, the clip is empty.

    So I reformatted and recharge my library.1 hour and 8 minutes remaining.

    OK, I got all the music reloaded

  • X230t win 8 battery 100% and maintains load

    Hello

    I am running Windows 8 on my X230t. All drivers are up-to-date of Lenovo (using system update 5).

    I don't use a lot of my battery. I've used several times in the past without problem. However, today, I charged my battery about 70%, and when he reached 100%, he wouldn't charge. I tried to use another AC adapter, restart the computer, remove the battery discharge and then recharge the battery, but nothing worked. The electric windows icon sayins 100%, hip, charge. Green also the charge status LED indicates that the battery is charging. This happens even when the computer is completely shut down. Don't know what to try next.

    Furthermore, I installed all drivers Lenovo & software for Windows 8 power management, but the typical Lenovo Power Manager with the thresholds of load custom does not appear on my computer. I have only access to the Windows default power manager. I don't know if the crib Lenovo Power just does not work on my computer or if Lenovo has not yet release a power manager for the X230T running Windows 8.

    Thanks for any help!

    Hello RSX:

    There was some discussion about this since the launch of Windows 8.

    This thread may be of interest to you:

    http://forums.Lenovo.com/T5/Windows-8/changing-charge-threshold-on-Thinkpads-under-Windows-8-without...

    and also this article on knowledge:

    http://forums.Lenovo.com/T5/Windows-8-knowledge-base/changing-charge-threshold-on-Thinkpads-under-Wi...

  • How to get the battery level and status in the cpp file?

    Hi all

    BatteryInfo class so I can I know how to get the battery level and the State in .cpp class?

    Hi Benecore,

    I have Add method below,

    #include

    But I only variable BatteryInfoPrivate not get variable BatteryInfo. You can also check on your side.

    So let me know how to get batteryInfo instance?

  • Network to see the battery life and time signal

    Hello

    It seems impossible to find this in the forums. But is there anyway how I can show the network Signal, battery life and time on screen?

    TIA.

    Ridvan

    lets see if the attachment works, its an example former of jonathan, his site is long gone unfortunately.

    I think he needs an additional code to cancel the onUnexposed timer and restart onExposed.

  • How can Windows movie maker, I stop the music to a certain clip and not replay

    How can Windows movie maker, I stop the music, play a certain clip and not play again?

    1. Add the video file.

    2. on the home tab use Add music to add music to the full clip.

    3 move the vertical slider on the film to where you want the music to stop.

    4. on the Edit tab, select Split.

    5. now, using mouse cursor select just the audio running along the top of the video AFTER your split point.

    6. press delete on your keyboard.

    You could also do it by reducing the volume of the section of audio after the split to zero.

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

Maybe you are looking for