Battery drops from 80% to 0%

Similar Questions

• Once I reset my battery CMOS from one day to the next. I tried to install my recovery disk this morning and can't get it done

  Once I reset my battery CMOS from one day to the next.  I tried to install my recovery disk this morning and can't get it done.  I kept receiving an error of 100.
  Don't know what to do.
  Are there out there can HELP?

  Please, I beg you!

  Thank you

  Hello

  Would you please ask the same questions more then once in these Forums.

  What you're doing is confusing in these Forums, as nobody else knows what advice are envisaged for you in other responses.

  Other questions, it seems you have an HP computer.

  Here is the information of HP for Vista from recovery to factory settings:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.
  

  NOTE: perform the recovery process by using the custom recovery disk you created can take less than an hour, whilst using the replacement disks ordered directly from HP can take four to six hours and includes several reboots.
  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.
  Use the recovery discs to restore the PC by following the steps below.
  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. etc.

  If you are having problems using the HP recovery process, you will need to contact HP, because this is Recovery process HP, not Microsoft.

  Details of HP:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  You can also try the Forums from the HP Support:

  http://h30434.www3.HP.com/

  See you soon.

• My taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, a completely frozen. Pleeez HEEELP!

  Hey there, at 7.52 pm (3 hours), my taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, completely frozen.

  The cursor does absolutely nothing when you click on it. Heeeeelp Pleeeez!
  Thank you, Nat

  Given that this problem is only a few hours ago, please do a system restore.

  Choose a date where you did NOT have this problem as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  You can give alco, this method a try...
  Restore explorer.exe

  Press CTRL + Alt + Delete... Task Manager... Processes tab... Right-click on explorer.exe... click on end process... Applications tab... New task... in the Open box, type explorer.exe ... OK when finished.

• Drag and drop from the tree to datagrid does not

  Hello
  I'm looking for a very simple setup drag and drop from the tree to datagrid and I see a weird behavior... when I drag a node of the tree to the datagrid... It is added to the DataGrid, but gets also reproduced in the tree of the source (except the first moved node)
  Here is the link where you can see what is happening
  Link to the sample application
  View source is enabled then please take a look and let me know what I am doing wrong
  
  Thank you

  "adeelmahmood" wrote in message
  News:g81gjh$FEC$1@forums. Macromedia.com...
  > Hi there
  > I'm trying a very simple setup drag and drop from the tree to datagrid
  > and I
  > see weird behavior... when I drag a node of the tree for the
  > datagrid
  > .. It is added to the DataGrid, but gets also reproduced in the source
  > tree
  > (except the first moved node)
  > Here is the link where you can see what is happening
  > http://mankatomoose.org/temp/treedragtest/TreeDragTest.html
  > View source is enabled then please take a look and let me know what I am
  > making
  > evil

  The source for an XMLListCollection is an XMLList. The XMLListCollection is
  a _view_ of the XMLList and has no existence apart from him. The XMLList
  its source is always an integral part of the original XML. Then, when you
  Add a node to the XMLList which is the source for your DataGrid, you also add
  it to 'something' in the original XML document. I think that you either need to make a
  copy of the knot or just look at filtering the XMLListCollection. Peter
  ENT it manages in this example by making a copy (ish)
  http://weblogs.Macromedia.com/pent/archives/2006/11/tree_drag_and_d_1.html.

  HTH;

  Amy

• Y40-70 battery goes from 100% to 0% (zero)

  Recently the battery on my Y40 1,5 years, began a fall from 100% to 0% and turning off the coast. I use the laptop frequently and made a gauge zero about a week ago. The problem continues to persist. Tonight, for example, after fully charged I unplugged the power cable to the wall and proceeds to start the computer. Within 2 minutes, he turned off and after reboot, the power meter indicates 0%.

  
  

• Battery goes from 100% to 90% - nine W450

  Brand new unit W450 and owner. Not too worried because I just got the unit and have yet to test the battery during activity.

  What I see is that GPS lights up as soon as the unit falling from 100% to 90% immediately. I fully charged the unit during the night using the supplied powerpack and the wiring. I see normal?

  It works only by multiples of 10.

  Justin, I don't know that it's really a problem. What I'm still not clear on, is how long it was off the charger before using GPS.

• The battery recharges from 57 percent?

  My HP nx9420 does not load increased from 57% when running on electric power. Message reads as follows: battery 57% available (plugged in, does not support). Why? How to get 100%?

  Hello

  Since you have it in the store I hope, they will be able to solve the problem.
  Looks like the battery might be the problem, but there may be other
  hardware problems.

  ======================================================

  Here are some information and troubleshooting methods for those who have a
  similar questions.

  How to check and repair a laptop computer death or netbook
  http://www.YouTube.com/watch?v=VCNQthuubR0&feature=related

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------------------

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Access points dropping from top to bottom

  I have anywhere from 5 to 20 points of access drop goes up and down all day on a total of about 200. I try currently to cross and understand why we our access points are conducting many issues and how I might be able to solve.

  One of the newspapers I see often is:

  AP "exp - p13,' interface '802. ' 11A ' controller ' 10.2.192.25 '. String passed to ' 44 ""60"due to 'None '. Energy interference before update is ' 0 'and after update is ' 0'. Noise before update is ' 0 'and after that update is ' 0'. Interference before update is ' 0 'and after update is ' 0'.

  Is any way to determine what the cause of this?

  The controller firmware: 4.2.130.0.

  Model AP-AIR-LAP1242AG-A-K9

  IOS Version 12.4 (10B) JA4

  Sounds as if it was just the Radio Resource Management (RRM) on the controller. You can disable this if she is down to customers. Go to the wireless tab, look on the left and click on the 802. 11A / n or 802.11b/g/n dropdown. Then click on the drop down RRM, click Auto RF.

  My advice is to change the algorithms of subpoena power and channel to "On Demand. You can call them to the need to maintain an optimal network. By default, it automatically calls the update every 10 minutes.

  Give it a try and see if it helps. If this isn't the case, we can explore more.

• Satellite L755-1NP - gauge battery missing from the taskbar

  It's really annoying.
  The small battery meter in the notification area is gone.

  It's really hard to guess the battery LED on the front of my L755-1NP. I tried make a right-click in the notification bar and verification of properties, the battery meter icon is grayed out, so I can't activate it.

  Anyone has any idea on this?

  Hello

  Maybe this workaround solution can help you:

  (1) open the start menu, type gpedit.msc in the search, and press ENTER.
  (2) notification of the UAC appears, then click on enter.
  (3) now you can configure and manage local group policies
  (4) open to all users and on the side left (pane), click Expand Configuration user, models of administration and Start Menu and taskbar.
  5) look in the right pane to remove the battery meter and click on modify.
  (6) to activate the power icon - select disabled or not configured, and then click OK.
  (7) now to restart the laptop

  Good luck

• When the battery drops below 50% the Satellite P200 turns off

  The laptop turns off when the battery is less than 50%.
  Do I have to get a new battery or what?

  Hello

  I guess you have preinstalled Vista.
  Have you checked your vista power management configuration?

  There you can assign some settings that would control the laptop turned off depending on the State of the battery.

  I think you need to set it to a lower level for example 5%

• X 1 battery drops to 78% after 7cycles

  My X 1 has been used for a month, and its battery life is terribly short. Sometimes, it can last for 2 hours (only search Web sites). Once I check battery Manager, it says that my battery has only 78% of its original capacity, with only 7 charge cycle. What will happen?

  I went to the service center and they change one for me. The problem would be the battery with disintegration.

• Drag / drop from Explorer in my application

  Hi people,

  I want to drag files or folders from Windows Explorer in a tree structure of my LabVIEW application. I have found no solution or for example (and I was not able to install the G-Toolbox, which is mentioned in some old forum boards).

  Does anyone have an example? Thank you very much!

  You already asked this question more LAVAand I even posted an example on how to do it. Please follow the threads that you create.

• Computer laptop closing drank himself and the battery goes from fully charged low battery in a short period of time?

  Hi I have a question about my laptop Toshiba Satellite. I've had it for almost 2 years and it worked fine up until just recently, my laptop stops itself and I thought before that this could be due to a heating problem but when it stops my laptop is not yet hot. I have installed new programs or anything again for that matter so I'm honestly confused? What's wrong with that? I also keep my laptop on a laptop computer fan to keep over heating.

  Hello

  It might possible that the battery is going bad.

  However, try the following steps:

  Method 1:

  See the link, then run the Fixit.

  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Method 2:

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/battery-meter-frequently-asked-questions

  If the steps above fail then I would suggest that you contact Toshiba support. Check out the link.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  It will be useful.

• Compaq CQ61 battery disappeard from the tray icon

  Compaq CQ61, windows 7 32 bit.

  the battery icon has always been there, now, it disappeared, cannot allow him to control panel.

  Control Panel\All Control Panel Items\Notification box Icons\System icons Allways show all icons and notifications on the taskbar is enabled (checked).

  Click on the link below page, scroll to the method 3 #4

  Download 4 b "Enable_Power.reg".

  Save it where you can find, then right click on the reg file and select "merge".

  Log out of your user account and reconnect or restarted, the icon must return.

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• VPN tunnel to drop from one day to the next

  Hi, we have a problem where he had fallen a VPN site-to site between a satellite office (Cisco 1801 running IOS 12.4 (15) T6) and our data center (Pix 515e 7.2 (2)) running. What happened twice since the 1801 was deployed in 3 weeks, both during the night. Restart the 1801 has corrected the issue.

  Just to complicate things, the remote site should also talk to another satellite site which is connected to our data via a MPLS network center. It works fine if the traffic is started from the remote desktop, however, there were occasions where he has stopped working too (but the remote site can still see the data center network).

  The remote site was deployed just before going on holiday and just returned to know these issues second hand (so without diagnosis/troubleshooting done so far, everything is currently works well). I'm waiting for him to make a mistake again before I can analyze more, but in the meantime any help would be much appreciated.

  Thank you, Rex

  If it's not I did on both sides of the vpn, hard-code the following commands on both the side and the asa, vpn client

  Crypto ipsec kilobytes of life security-association 5000000

  life 7200 seconds crypto ipsec security association

  the two commands are the same on both platforms.