battery level indicator
After the update my BIOS with HP Support help... while using battery on my laptop... the battery indicator goes down... it always shows 100%...using on battery indicator may not decrease Windows 8.1... Please help me how to solve this problem... quickly please.
Model: HP 14-d008au
Hey @Monirul
Welcome to the HP Forums!
I understand that you are having problems with the battery level indicator on your laptop.
Try the following:
- Press Windows key + R
- Type devmgmt.msc, and then click OK
- Expand the section battery
- Right-click on the compatible Microsoft ACPI control method battery
- Select uninstall
- Restart the PC
Let me know if it works!
Tags: Notebooks
Similar Questions
-
I just plugged my new keyboard magic and it doesn't seem to be a battery level indicator in the system preference/keyboard. There is on the Magic mouse, but not on the keyboard. Any ideas? El Capitan V 10.11.2
And what has this to do with the Pages for Mac?
Peter
-
Laptop computer Acer battery level indicator
I have a notebook Acer Aspire with Windows 8 on it... The battery level indicator turns off before sometimes but to come back after a reboot. Now it appears quite... Is there a permanent solution to this problem?
HelloStart your computer in a clean boot, and then check if still face you this problem. Follow the steps below.If you still experience the problem, contact acer support. -
The battery on my windows computer level indicator 8 shows 'remaining unknown"How can we solve this problem? Thank you. Jim B.
Hello
First, do a power drain: unplug the laptop, remove the battery, then open it and hold the power button for about 30 seconds. Once done, replace the battery, then connect the charger, then turn the computer back on.
Visit the website of HP and updated the Bios for your device.
Calibrate your battery.
-
How to display the host battery level indicator in the comments?
Hi, I use 3 player on my laptop. To avoid surprises, I want to have my Vista-host battery indicator displayed in my XP-feedback session. Is there a way to do this?
THX - René
Add the following 2 lines to your vmx file:
chipset.useAcpiBattery = 'TRUE '.
chipset.useApmBattery = 'TRUE '.
-
Level indicator in the taskbar battery
Original title: battery level indicator
How can I get the battery level indicator to appear in the taskbar
Hello
1 Please reboot nothing so interfere with this process.
Click with the right button on Taskbar - Properties - tab Notification area - check Power box - if it is grayed out
Then, use this link. (The same Volume, clock and network).How to enable or disable the system tray in Vista icons (there are several methods
and you can to use them all).
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.htmlIf necessary: a Mr Fixit
System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
Restart the computer
http://support.Microsoft.com/default.aspx/KB/945011I hope this helps.
-
Apple Watch series 2 battery level stuck at 100%
My new Apple Watch series 2 battery level indicator is stuck at 100%, regardless of the current battery level. I tried to restart the watch and it did not help. Anyone else know this and know a fix?
Hello
As you've already restarted your watch, it can help to disable the pairing and re-pair the headset:
- The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Set up your Apple Watch - Apple Support
-
Question of battery Power level indicator
I got Windows 7 Starter on my computer for two years without a problem. I was in Korea last month and here, the system danced two updates. During the first update, the battery level was at 85%. After installation of the update, the battery would not be deducted more than 85%. During the second update, the battery was 75% and it is now that I can charge the battery. How can I fix it?
Hello
1. What is the brand and model of the computer?
Please follow the methods.
Method 1:
Follow the instructions in the link.
Solutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems
Method 2:
Completely drain the battery, then remove and reinsert the battery and check if it charges completely
Reference links:
http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery#section_3
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter
-
gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches
When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.
It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...
Appreciate any help on this
Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support
-
Sansa Fuze battery: percentage indicated
Hi all - I've noticed recently that the percentage of battery remaining indicated on my Sansa rockets - I have a 2 and a 8 GB - differs the battery percentage remaining indicated through my computer when the device is plugged into the USB port on my PC.
E. g.: verification of my view of "System Settings > Info" on the "rocket", I see 27% duration of remaining battery life. I immediately connect the "rocket" in a USB port (my computer has two; either one). The 'Properties' indicator for the rocket of remaining battery life is 63%.
It's constant and reproducible. There is always a HUGE disparity between the percentage that appears on the "rocket" itself and the percentage indicated via USB/PC connection. Note that the rockets still indicate a much lower figure.
No idea why this is happening? Thank you very much in advance for any answer!
Cyndi wrote:
I run them down. As I said, I charge them when I see they are about 20%. As JK98, mentioned in the "Fuze Battery Life and good practical battery" thread here: "the battery prefers a partial rather than complete discharge. Frequent full discharges should be avoided when possible. »
If you are let off at 20%, which is almost fully discharged. Circuit of the rocket will turn off right around that level to prevent permanent damage to the battery or the charging circuit. Let down this low once in a while is OK, but I wouldn't make a habit of it. Better to load when it comes down to 50% or more. These types of batteries prefer to be crowned often, rather than the older style batteries that worked when deep-cycled.
-
The battery level is displayed
The battery on my windows computer level indicator 8 shows 'remaining unknown"How can we solve this problem?
Thank you. Jim B.
Hello
Try the following:
- Remove the CMOS battery will define just all the bios to default settings including the date and time. Nothing to do with windows is affected
- Try to remove the battery and Charger/AC adapter / power cord to your laptop, press on and press and hold power for 20 seconds to discharge any residual current inside the laptop. This erases your RAM and it's like a hard reset. Replace the battery and Charger/AC adapter cord/Power and turn on your laptop.
- Check if it's something to do with your computer problem laptop power cord or source. Insufficient power can cause some of these issues as well. Take the battery and power on your laptop with the charger only.
- Make sure that your portable power outlet and plug charger tip are correctly connected. If open air supply you can find on eBay laptop power jack. Fixing and welding of the power supply, however, requires professional skills.
- It is also possible that the power supply in the laptop card has failed. The only way to diagnose, to bring to a service center.
Source: Yahoo , Tom Hardware
Hope this helps
-
Dv5 - 100%, but still in charge of battery level
Hello!
My laptop is a Dv5-1125em. It shows a 100% battery level if it is fully charged but always keep on the led "charging". Notification Windows 7 keeps saying 100% available (plugged in,load).
I checked the battery with HP Support Assistant and the result was "Status: OK"
I'm not under any resource high consuming applications and even tried to keep for some time see if the light goes out.
When unplugged, block level decreases as usual and cool as usual after connecting. Problem is that it is always in charge even after level reaches 100%.
Any suggestions?
Thank you.
Hello
ayomawdb wrote:
Hi erico, thanks again for the reply.
As an indicator of charging battery not turn off even when laptop is not activated, I also feel that the battery has failed. Guess that there cannot be a firmware or software problem.
As battery rest at 98% constantly and laptop shuts off if suddenly, is it ok to work plugged in power until I could get a new battery. As you can guess, the charger permanently try to charge the battery and shorten its life too?
Any suggestions on this subject?
Thank you very much..
Yes. He is allowed to work with connected until you replace the battery.
I suggest that using the laptop on battery in its State current would be a little risky for a workplace.
If I was using the laptop, have suddenly turns off when I was in the middle of creating an outlet or word document mind.
Best regards
ERICO -
Can I display the battery level of the mouse on my desk at all times?
I have an apple mouse and I want to check the battery level of mouse frequently without open the system preferences application. Can I permanently display the level on my desk somewhere?
You may be able to view the status of the battery of a keyboard and a wireless Bluetooth mouse
from the inside (or bound by) Bluetooth icon that can be made to appear in the Finder
top right of the main window. The two items should be a little quicker to consult, through this path,
that to go into System Preferences > keyboard, mouse, etc.
Didn't see a third party application or widget that might show the remaining battery life
in the computer or external BT wireless an iDevice. There may be a.
A widget by name iStat Pro used to offer a way to see these items, but not in the last
version and the company that makes the excellent original, no longer exists as such.
Good luck & happy computing!
-
fan stays on too long and the battery level decreases rapidly: any problem identified?
Fan stays on too long and the battery level decreases rapidly: all identified cause problem or possible?
MacBook Air mid-2013
OS 10.11.13
Processor 1.7 GHz Intel Core i7
8 GB of DDR3 memory at 1600 MHz
Thank you, Paolo
Hi Paskowski,
Can you give us a little more information about your problem? What applications or processes are you using when you encounter the problem with your fan and battery? The activity monitor application can provide you with some basic information.
Use the monitor activity on your Mac.
The resources below provides general information on how optimize the battery life and troubleshoot the battery on your MacBook Air.
Take care
-
1950-battery level suddenly drops to 5%
Hello
I have a 1950-902 Satellite. I was wondering if someone could help with the behavior following problem / unusual that began a month ago:
I have started using the laptop with the battery appears as complete in power management. After that 10 minutes of battery used, as soon as the battery level shows as being about 85%, the indication of battery level suddenly falls to 5%, and the hibernation. When I reload the battery, the charging process takes very little time (about 30 minutes).
This behavior is repeated everytime I use the battery now.
What's not?
Thank you.
Hi Eleni,
It seems that some cells in your battery may have failed and consequently the battery can hold only a small portion of the normal load. I suggest that a new battery is needed.
Kind regards
Maybe you are looking for
-
Tecra S2 bluetooth internal module
Where can I found out if it's possible to install internal bluetooth module PA3425U-1BTM on Tecra S2 model NUM. PTS20E-01W00MG3? Laptop was purchased in Europe (Slovenia)! P.S.: Where can I post a question for an expert... etc.
-
I want to enable virtualization on my ProDesk SFF 600
I want to be able to run Hyper-V on my desk for testing purposes and even if the element securable app says that the processor supports it that I can't find the place where to allow him nor could I find any way to technical support on the HP site. I
-
Why WINDOWS usually allow me to set a password on my own administrator account?
-
I use WebWorks under linux with no problems, but recently I moved my dev for Windows 8 environment, and now I can't build my apps. Here is the command I use, using WebWorks 1.0.4.11 (part of a generation of Jake) with the output: > "C:\Program Files
-
Help blackBerry Smartphones... accelerometer has stopped working
Had my storm for 2 weeks now and am in love. Just bought a few games and utilities yesterday. I have loaded the games but only played with 2 or 3 of them. Today, I noticed that none of my apps 'Message' (yahoo, sms/mms, email yahoo & bb) go in landsc