Tecra S2 bluetooth internal module

Similar Questions

• No Bluetooth on Satellite T130 - can I put internal module?

  I have a portable Satellite T130 without Bluetooth.
  Is it possible to built in Bluetooth module, or something? I'm not a cause of USB adapter I need all the USB ports.
  Thank you

  Hello

  There are different models with different hardware specifications
  Maybe your T130 does not support internal BT module
  But normally there should be a PCI interface which should allows you to use an internal module but for more details, you should ask the Toshiba ASP in your country.

  The point is that laptop disassembly will void your warranty and I think that it of better to pay a small fee for an upgrade, but to keep the warranty valid

  Welcome them

• Satellite A500-011 PSAR0C - 01100D - adapter Bluetooth internal

  I have the Satellite A500 - 011 PSAR0C - 01100D, I'm looking for an internal Bluetooth PCI adapter that slips into the pci card slot on the side of the laptop. without opening the computer)
  Can someone help me find the part number?

  I remember seeing it on the site of toshiba, earlier, but not here, can't find it. I would like to order a.

  I have an external Bluetooth USB adapter, but it's a bit crumbly and he goes out and gets stuck in the bag, etc..

  There's an internal module, but I don't want to open the case and damage it.
  Thank you

  Is mini USB BT donglesolution for you?

  I think it is better and easier to have BT

• Re: HARD drive need internal and business BT internal module for Satellite P300-156

  where can I buy HDD case internal and internal module for Satellite P300-156 BT?

  Try an authorized Service Center. There is a list on the Toshiba under Support site

• Question about connector Bluetooth internal on Tecra 8100?

  Hi all.
  I have a laptop of 52 - sp pt810e - 13 c. Updated to 512 MB by using 2 toshiba 256 MB pc100 modules purchased on ebay, upgrade to a PIII 850 also obtained in a ebay and upgraded to a larger 40 GB wdc wd400e hard drive, with a lot less noise than 12 GB the original.

  Play with my computer, I found an internal connector "bluetooth" next to the inside which belongs to the keyboard.

  Why is this? Are there any new Bluetooth module for Toshiba Tecra 8100?

  Hello

  I guess that this connector is placed on the motherboard, because it is possible to upgrade the Tecra 8100 with an internal Bluetooth module.
  I don t find Bluetooth modules compatible but all supported and compatible parts, you can order from the Toshiba service partner in your country.

• Equium A200 - adding hardware Bluetooth internal

  I'm tired of the external addition of a Bluetooth USB dongle into my Equium A200 PSAE8E (which has no such internal device).

  Is it possible to add the original Bluetooth Toshiba INTERNAL device as an alternative?
  Anyone know the specific model number (to be ordered) and is easy to install without resourcing to authorized Toshiba service?
  Thanks in advance

  Hello

  First of all you cannot pass this laptop with internal Bluetooth card because you will lose the warranty! These updates can be done by an ASP.

  Therefore, you will need to contact the authorized service provider in your country for these updates and guys are going to use the compatible module...

  But do you really want to send the phone to a service point? I think that a USB Bluetooth dongle is really not a bad solution, and personally, I would prefer an external solution...

  Greetings

• Tecra A4 Bluetooth? There she?

  Newbie here but Ive just got my C Tecra A4 1.5 today and it has the Bluetooth etc software installed and also small icon in my taskbar, but when I try and run it, it says bluetooth is not ready, I didn't it was BT and I am confused why the software was preinstalled?

  Thanks in advance

  Hello brad

  If the unit has a Bluetooth connection in the lower corner there must be a label of Bluetooth. On this page please http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=96&service=EU&FID=tro000000189d. I guess your device doesn't have Bluetooth, but AFAIK it's certainly ready Bluetooth and Bluetooth module can be added extra.

  The image mounted on device is also Bluetooth ready and if you decide to built in software is already installed.

  Good bye

• Tecra S2: Bluetooth is not ready

  I am Fadi.
  I bought Tecra S2, but I did customize and I added a few extra currencies, one of them was Bluetooth V1.2.I paid for this money, but when I receive the laptop, the bluetooth is not working
  I tried everything,
  1. I have cheacked for the lable of bluetooth on the slot cover and there exists.
  2 - I tried fn + f8
  3 - I tried to install another driver and app.
  4. I've tried everything, but unfortunately there is no positive result,
  5. I put an another usb bluetooth, and it worked very well.

  and explain exactly what happened:
  When I turn on the wifi and bluetooth, I have a msg of receiver ((unknown usb device)) I tried to put its driver but I have nothing.
  and when I try to use bluetooth, I get ((legacy is not ready))so polease I need your help as soon as possible, because I do not know if the bluetooth existing or not, or its need correct driver or something, please I need your help
  Thank you in advance

  Post edited by: fadiart10

  Hello

  As much as I know Tecra S2 has no Bluetooth module, but it is Bluetooth ready. This means that the Bluetooth software is already installed. There are two solutions:
  -You can buy the Bluetooth module and it must be built in or
  -You can use an external Bluetooth device as USB Bluetooth stick.

  Good bye

• Tecra M3 (PTM30E) - new module of memory not recognized

  Hello

  I have a Tecra M3 PTM30E 09X01LEN and am trying to upgrade the memory - addition to the 512 MB, it came with.

  I bought an upgrade memory of 1 GB Toshiba - PC2-4300 DDR2-553 and tried to install it in the housing B (leaving the original card where he was). As far as I know I've followed the instructions in the manual (which is pretty poor, since it is just of the drawings), but the new memory is not recognized.

  What can I do else?

  Hello

  Strange but perhaps your new RAM module is defective or the second memory location.

  Have you tried the new memory module in the first place?
  What happens if you put the original 512 MB module in the second slot? The module is recognized?

  Check it!

• Tecra S1 Bluetooth

  can someone tell me where to look to find out if my Tecra S1 is compatible bluetooth, I installed the easy connection and battery, but it says bluetooth is not on, there is no bluetooth in the Panel settings, and nothing happens when I press Fn + F8, so I think that it is not installed. If this is the case, what are my options? can I get a SD/USB bluetooth device?
  Thank you
  Matt

  Hello

  First, you must be sure that your device has a Bluetooth card and you can check it on the site from the bottom of your laptop. If the device has a Bluetooth card must be a Bluetooth label. As far as I know your unit is ready for Bluetooth.

  If there is no Bluetooth on your device, there are several solutions. You can contact the Service partner and ordered a Bluetooth card and it can be built in. Otherwise, you can use a USB Bluetooth stick. It should also works without a problem.

• Tecra M3 - Bluetooth Stack versus Bluetooth Monitor?

  Previously, had a Tecra 9000 and never got bluetooth works smoothly and seem to have the same problem with nine Tecra M3... (maybe its me!)

  I checked and updated all the drivers downloads and had problems to any Bluetooth (M3 for IPAQ 3970). Found out that if you uninstall Bluetooth Stack and reinstall it the battery but do NOT install Bluetooth Monitor, everything seems to work (as far as I know). Prices Bluetooth Stack Bluetooth Monitor alternative (the installation guide does not suggest it)?

  Thank you all

  JonBer

  Hello JohnBer

  The only thing I can tell you about Bluetooth technology, it's that I use Bluetooth Toshiba Stack to connect to my mobile phone from Siemens. I sometimes use it as modem to check mail short and fast. I have no problem and the connection is fine. I use the wizard of a mobile phone is always properly recognized and I can use it without problem.

  If you have some problems to make the connection between your device and some external device, it can be caused by some false setting. To make good configuration between laptop and mobile phone was not easy. As I said to check all the Bluetooth settings on both units.

• Tecra M2 Ram upgrade - modules of memory should I use?

  I need to update my RAM on my M2 Tetra... what ram buy to maximize its performance?

  Thank you

  Hi Phil

  This simple Tecra M2 stand s the PC2700 200-pin (333 MHz) DDR SODIMM memory modules and you can increase the ram up to 2 GB

  You can use these modules to Toshiba:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  PS: I recommend using brand names modules and NOT no - name because the performance of Toshiba or Kingston modules is much better

• Tecra M4: two internal microphones? or just one?

  Dear users of Toshiba,

  For about a month now, I've been the proud owner of the Tecra M4 Tablet PC. I really like the machine and yet I discovered new options.

  Recently I started using voice recognition software (Tablet Input Panel > tools and Options > speech) to dictate files using the internal microphones. And that's where the rub...

  According to the user manual (PG. 2 - 1) the M4 comes with two internal microphones. They appear as small holes in the plastic front cover, the microphone on the left. between the switch wireless and external microphone. Jack, the right on the right about the same position.

  When you use the MIC that I seem to only get a signal from the microphone of law. Running Win XP microphone test (Control Panel > sounds and Audio devices > voice) don't give not any proper or feedback.

  Someone meet the same questions?

  Hello

  Well.
  AFAIK the Tecra M4 has 2 internal microphones audio but Mono and an Audio external Microphone input Jack. On this unit control panel, you can find a SoundMax program.
  There you can change between standard microphone and microphone SoundMax. Check the configuration. Also in the effect of Toshiba Mic, you can configure and activate the volume of the microphones.
  In the network section of microphones, the option enable Toshiba Audio effect should be marked.

  Best regards

• Tecra A3: Bluetooth information exchanger cannot transfer documents

  I have a Tecra A3 and I have already installed the Bluetooth information interchange. The problem is I want to make a copy of my cell phone, a Nokia 6230 safety, I have Windows XP and the problem is that bluetooth does not iniciate... as it says.

  The exchanger recognizes the Nokia but I can't transfer all documents...
  Can you help me?? What should I do in order to make a copy of my mobile security? I tried both with the inalambric vincle and it doesn´t work either.

  Thank you.
  Sandra

  Hello

  Thanks for the info

  Good bye

• Tecra M9 - Bluetooth, problem with mobile ' phone

  I installed Bluetooth stack and a connection via Bluetooth Manager

  But Tecra will connect only as "Network Access Point.

  How can I create a link as modem - I'm probably not using the Tecra via mobile, on the internet but I have certainly you want to use the functionality of modem from mobile phones to send faxes and SMS (text) messages when out and about

  Any help much appreciated

  You must use the custom of "Bluetooth settings" Mode.
  Take a look at the following document called
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  on this site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO
  and you should make it work.