BB 9000 - critical failure error Tunnel

Similar Questions

• Ink system failure error Code 0xc19a0013 HP Officejet 6500 has

  Printer has stopped printing in black ink: get a gray tone or no impression.  Get higher up the ink system failure error.

  Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor.  I consider when buying a new print head or a new printer, any other suggestions? It's only black ink.  I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again.  Thank you, Sue S.-S.

  You're welcome Sue

  See post below on Bob soak the printhead...

  http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

• HP Pavilion 030ea-b: Hardware Diagnostics failure error

  Hello

  I ran HP PC Hardware Diagnostics UEFI. Details [disk 1]:

  Smart Check: spent

  Long DST: failure

  Failure ID: 0LG55D-000837-X87T1A - 618P 03

  Please could someone tell me what is failure and how do I correct?

  Thank you very much

  Hi @23 - B030ea,.
  
  Welcome to the Forums of HP Support!  I understand that tests your cam drive upward with an error when you run the UEFI. I'm happy to give you a helping hand with this.

  I checked the ID failed you posted and it gave me the error code SMART Drive from 305. Now if your hard drive still works for you, I highly recommend to make a backup of all the data that is important to you as soon as possible. A SMART test drive is usually a predictor of drive failure. It could happen today or in a few months, but rather than to risk of losing everything, it is best to take precautions.

  See also this paper: HP laptops - Hard Drive failure errors: failure Imminent, Smart, BIOHD, HD535, etc.

  Once your data is safely backed up, you should probably look at a replacement hard drive.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• laptop hard drive failure error 301 on my device

  a few descryption

  . device name - hp pavilion g61200 do you

  . the problem in the hard disk it displays SMART drive failure error (301)

  HP PAVILION DO YOU G61200 & O/S WINDOWS 7 ULTIMATE

  I want to know, what is the ERROR DISK HARD SMART 301

  with in a few days I am facing this problem in my device

  so, what can I do for this problem...

  Please tell me

  Hello

  Do a hard reset first.
  http://support.HP.com/us-en/document/c01684768

  The SMART drive test produces a prediction on the risk of hard drive failure, not a real failure.

  A warning to SMART disk error can appear for various reasons such as having been jarred abruptly computer or hard drive, be subject to the higher than usual temperature.

  Perform HP hard drive - wide test of the system BIOS Diagnostics shortly after switching on, tapping F10/F2

  If there are any Smart player or hard failure error you see, Hard Drive is a failure and the solution is to replace the drive.

  It would also be very wise to make sure that you back up all your files etc as soon as possible.

  Thank you

• Ink system failure error 0xc18a0201

  After installing new ink cartridges provided with HP C7280 all in one ink system failure error 0xc18a0201 occurred.  Cannot find reference to this anywhere error code.  What is this and how can I fix it?

  I found this solution for... C5180 ink system failure, and assumed/hoped the firmware was the same... it worked!

  ***********************************************

  Press and hold the "left arrow" key

  Press the "Setup" key and release both keys.

  Display should say "enter special key Combo".

  Press and release the OK"" button.

  1. press and release the right arrow button until the display shows "Menu of theSystem Configuration'.

  2. press and release the OK"" button.

  3. the display should say "hardware failure status". If it isn't there already, arrow above for "Hardware failure status"

  4. press and release the OK"" button.

  5. display should say "hardware failure status: clear." Press OK to Erase".»

  6. press and release the OK"" button. Message becomes " failure State material (breakdowns) resolved." Press Cancel to continue.

  7. press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the " failureof the System ink " appears. DON'T TRY TO PRINT AT THIS STAGE.

  8. using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

  9. wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

  10. turn on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

  11. If the printer has already initialized, then go to the next step. If this is not the case, the printer will start the "ONE TIME INK PROCESS of INITIALIZATION". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

  12. to verify printer functionality print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use.

  NOTE: If the error is still there, or reoccurs replace the unit.

• Update for microsoft security essetials KB2804527 (4.2.223.1) installation failure error code: 0x8004FF83 all other updates installed OK

  Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.

  What version of Microsoft Security Essentials you run?

  What operating system and service pack?

  Prior security software?

  No matter what security software installed again?

  Please read the following:

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  You may need to use a cleaning tool to remove your prior security software:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  The current time and the date now in Ohio, the United States is

  07:28

  Wednesday, February 27, 2013
  UTC - 0500 (EST) Eastern Standard time

  UTC/GMT is 12:28 on Wednesday, February 27, 2013

  Current weather conditions in Columbus

  Cloudy4 ° C / 40 ° F

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• 'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309

  'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help

  Have you tried the steps outlined in this article:
  http://support.HP.com/us-en/document/c03081973

  If not try the steps and tell us if it helps.

  Good luck!

• ... has been registered. There was an unexpected failure (error code 771)

  Upward until about a week ago Windows Media Center records very well. Suddenly, none of our TV shows will record. He gives us the same error message:... .to was not recorded. There was an unexpected failure (error code 771). I checked our storage and we have plenty of space for recordings since we generally remove them after watching. The computer will not be because of sleep mode that I was on the computer when the bubble of error is displayed. It will record only if I go into the Media Center and hit record on a show that is presented on the airwaves at the time.  It does not freeze during recording, just won't save.

  Hi Adolpha,

  1. don't you make changes before the show?

  Try the following steps to set Windows Media Center Receiver Service local only and check the result.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click "Windows Media Center Receiver Service"
  c. change the startup type to automatic, and then click Start.
  d. click the Log on tab, select "Local System account".
  e. click ok to apply the changes and restart the computer.
  f. check if the problem persists.

  See the question "What should I do if Windows Media Center is unable to record a show?" in this article.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn lightscribe cover__

  I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover

  http://www.Nero.com/enu/tools-utilities.html

  Uninstalling a Nero product did not work properly?
  Use Nero General CleanTool to delete all remaining Nero entries from your system.

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Printer HP Photosmart C6150 all-in-One. The Error Message ink system failure, error: 0xc18a0001

  I have a HP; hotosmart C6150 all-in-One printer. My magenta ink cartridge ran out of ink. Several days passed and I would like to select print using only black ink cartridge. Now my printer has stopped working. I now get the message ink system failure, error: 0xc18a0001. Just in from a new cartridge HP magenta ink and installed but I keep getting the consignment: ink system failure, error: 0xc18a0001. How can I get my printer working again?

  [Personal information]

  The printer service: to replace. If it's under warranty we achieve for you if you call 1800-474-6836. If you are not in the warranty, we offer a few solutions for you. We always have available agents. Please call anytime.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

• HP Photosmart D7360 ink system failure error: 0xc18a0206

  I tried to print a doc then do not use this printer for over a year. The ink system failure message appeared when I turned on the printer, so I replaced all the old cartridges with new ones. The message persists, and I can not print even a sample or Test page. My page to print remains in the queue. I tried to reset several times with the method of disposal of recommended power cord. Always with the same result, ink system failure error: 0xc18a0206. This machine is maybe just too old. After spending over $ 100.00 on new cartridges that would be very disappointing. I use a Sony Vaio under Windows 7 Home Premium laptop, but since I can't print a test or sample, according to me, that question must be in the printer.  I'm holding off on the sledge hammer method for now. Help, please.

  Hey hphippie,

  I see that you are faced with an ink system failure error code on your Photosmart D7360.  Looks like that sitting for a while can be brought to shame in the printer.  I recommend following the steps outlined in the document below link for troubleshooting an ink system failure error code.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  Let me know how it goes,
  Jason

• Message 'Ink system failure' error 0xc05d1281 in Photosmart C7250 Printer

  First message was "cartridge after expiry."  I turned and turn on the printer. Tried to print again. New message has been

  'Ink system failure', I bought a new cartridge, installed, tried again, still 'ink system failure '.  The printer is a 3 in 1, black Plus 5.

  About 4 years.

  Hello rubadub,.

  Regarding your question, here is the troubleshooting HP article.

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  Ink system failures are usually in the ink cartridge, the print head or in the printer. Since you have already replaced the ink cartridge, the problem lies in the print head or the printer.

  The C7250 print head is permanent and cannot be replaced or cleaned outside the aircraft so there is not much we can do with working with her.

  Go through the article and follow the steps in the order

  1. remove the cartridges and install it

  2. use the automatic printhead cleaning utility (sometimes you may need to run this several times)

  3 reset the product

  4 maintain the product

  If the first three steps do not resolve the problem, there is not much to service other than the product. Return ticket if the first three steps help or do not help, maybe we can think outside of the box before going to the service, but we'll see if the standard general steps work.

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• C6180 ink SYSTEM FAILURE error message

  IF ANYONE CAN HELP WITH THIS ERROR MESSAGE?  FAILURE of the SYSTEM of INK 0xc19a0035

  I HAVE A C6180 ALL IN ONE.               IT DOES NOT RECOGNIZE THE FACT

  THAT I HAD REPLACED A CARTRIDGE A MONTH AGO... HP brand AND NOW GET this MESSAGE.

  I RE-SET, CLEANED ALL THE CARTRIDGES AND TALKED WITH HP ON THE PHONE 2 X.   IT WORKS AGAIN FOR A SHORT PERIOD, THEN THE INK SYSTEM FAILURE ERROR APPEARS AGAIN.

  HP said I need a new?   It worked very well until this and always does this for awhile after you reset it, so can't understand

  Why should I go out and get a new one for this problem.  I hope someone can help!    Thank you!

  IS NOT THAT DEMAND THE DAY 'EXPERT' OF AID?  HAVEN'T HEARD ANYTHING YET!

  This same error started on my printer and eventually it would power on and off constantly. Apparently some defective components were used in the construction of the logic board (see photo). My C6180 there were 3 defective capacitors (the Green cylinders - breathtaking top indicates failure) and a 4th from the same manufacturer (TEAPO - many web references unfavourable to this manufacturer). I bought 3 x 330uF 16V and 1 x 680uF 10v rated at 105 degrees Celsius (total about 60cents). On the logic board, the capacitors I replaced are labeled C613, C614, C660 and C662. If you are not comfortable replacing components yourself (or is not a soldering tool), you will need to find someone who will. The repair time should be less than 30 min - I did it in 25 minutes with only a solder pen. This also fixed the ink the printer was to have system failures. A similar fix may apply to other printers.