BB10 - problems w / dynamic populating list of images with the data of WebSQL

Similar Questions

• Dynamic action does not not with the Date

  Hi all
  
  In my form, I created a dynamic action to be pulled on losefocus on the date of the birth column. The action returns the age in the age column. It only works if I use the date of birth hard-coded as follows:
  
  SELECT
  SYSDATE - AGE TO_DATE('01-JAN-2007','DD-MON-YYYY')
  OF THE DOUBLE
  
  It does not work if I use the actual date of entry as follows:
  
  SELECT
  SYSDATE - AGE TO_DATE(:P2_DOB,'DD-MON-YYYY')
  OF THE DOUBLE
  
  My version of the apex is 4.02 and database 11g.
  
  Could someone point out what I'm missing.
  
  Thank you
  Zahid

  Hi Zahid,

  When you want to use the values of the element of the page in a dynamic action of pl/sql, you must go to the section "Articles to submit the Page.

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• "Cannot select"[Gmail]"on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. »

  Original title: "error message"

  I get this error message whenever I try to download my gmail account

  Header for the file download "[Gmail]" has not completed. Cannot select "[Gmail]" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'imap.tools.sky.com', server: 'imap.tools.sky.com', Protocol: IMAP, server response: ' unknown mailbox: [Gmail] (failure)', Port: 993, secure (SSL): Yes, error number: 0x800CCCD2

  Please repost your question on the Forum of GMail at: http://www.google.com/support/forum/p/gmail/label?lid=745896f193361992&hl=en where the experts to GMail will be happy to help you.  You can also try technical assistance tohttp://mail.google.com/support/.  It is a GMail problem, not a problem of Vista.  If you use an e-mail program rather than online access, then it is possible that the e-mail program settings are incorrect. We do not know these settings but people to GMail.  That said, here's the IMAP settings for a number of e-mail programs (generic parameters - obviously not including your specific account):http://mail.google.com/support/bin/topic.py?hl=en&topic=12806.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

  ReemaPuri wrote:

  in the workspace image:-resign.jpeg

  

  As a button? Seriously?

  Ok. First of all, because the image already contains text, there no point in including the same wording in the form of text on the button. Accessibility requirements can be met using re-sign as alternative text. 4.2, create an image button:

  Tag/Alt text: Re-sign

  Static ID: re - sign

  Style button: Image

  Button Image: & WORKSPACE_IMAGES.resign.jpeg

  To make the image looks more like a button, add the following CSS to Inline CSS property page:

  #re-sign img {
    margin: 0 2px 2px 0;
    border: 2px outset;
    border-radius: 4px;
  }
  #re-sign img:active {
    margin: 2px 0 0 2px;
    border: 2px inset;
    border-radius: 4px;
  }
  

  Finally, there is a bug in 4.2 that generates the incorrect URL for the button images, which requires dynamic action of Page Load to fix.

  Event: Loading the page

  Action: Run the JavaScript Code

  Code

  var resignImg = $("#re-sign img");
  resignImg.attr("src", resignImg.attr("src").replace("/i/", ""));
  

• How to work the DNG? is it always the original image with the settings of self-development?

  Hello!

  A question about DNG. recently, I had to put a bunch of my RAWs to print elsewhere. I copied all the RAWs and XMP files. Then imported on a different PC/LR. Others do not, some reflect my edit-adjustments. RAWS all VINTAGE.

  I save now on some DNG of my final print changes.

  I'm thinking a DNG in PDF format.

  When I export a DNG a RAW processed, is it cooked in? or is it always the original image with the settings of self-development?

  Thank you

  Alex

  Lightroom is a non-destructive Editor. So, you can take any file type (JPG, DNG, RAW, TIF, other) and edit this photo, and always come back to the unedited version.

  If you export your RAW as DNG or export your RAW as the 'Original', you can also revert to the unedited export version (but not if you export as JPG or TIF).

  With regard to your initial statement that you have 'copied the RAWs to print elsewhere', they may not had the changes written to XMP. It would also be a problem with the DNG format, as I said, you should enable the option to write changes into XMP or issue a command, because by default, Lightroom writes not changes to your DNG or sidecar xmp for the RAWs files.

  The copy is different from export.

• Whenever I have download an image with the command "save the image under...". ", it records in a useless file of 168 bits.

  As stated, whenever I have download an image with the command "save image under" he recorded in a useless file of 168 bits. This does not happen everytime I have save an image, but more often the not, and I don't have a lot of useless files hang out because of this. Is it possible to re - download each image 168 bits that he should have been downloaded in the first place? Is it possible to ensure that this does not happen?

  Here's what it looks like:
  http://i.imgur.com/yzgwwgC.gif?1

  This means that you are not allowed to do this action.
  The site could use a transparent overlay image to protect the actual image or otherwise has put in place a protection.
  You can check if see you the image in "tools > Page Info > Media ' and save it.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• How can I share 'My images' with the other user accounts on my computer?

  How can I share 'My images' with the other user accounts on my computer?

  where are the 'experts' on these forums adverstised?  I can't get an answer to a simple question.  Does anyone know how to do this?

  Here we are, ok, I'm not an expert, but try this:

  Right click on 'My images' > share > specific people... > select that you want to share this folder with.

  ...

  After that, try to connect by using a different account. If you will not be able to open C:\Users\"FirstUser"\Pictures, you try to extend the network in the left pane of Windows Explorer > expand ComputerName > expand users > expand "FirstUser" > photos

• Need a Script to the space of images on a total gap, then tag each image with the percentage of the total image space

  By editing the other scripts, I found here and other sites (including the labels size rorohiko), I worked on a script that will each image with the dimensions of the label and calculate the percentage of the spread of everything (including the text, white space).

  Now, I was invited to a script that tagged the images with the percentage of total image on a gap space. This script is so space images on a total gap, then tag each image with the percentage of the total image space. For example if there is an image that is 10 x 10 inches and four pictures that are images of 2.5x2.5, 10 x 10 would be tagged with 50% and the 2.5x2.5 would be tagged with 12.5%.

  This is the script that does the percentage of total circulation. Can some clever person get to do what I need?

  Suze

  (Sorry, I don't know how to post the script here with line numbers!)

  //

  This script adds printing of information labels to each graphic image. The labels are on a separate layer

  named "PercentageLabels" so that all these added labels can be removed again by simply removing

  the layer.

  //

  If you move or resize items, simply re-run the script to update the labels.

  //

  Before (re) start the script, you can define a paragraph style "SizeLabelStyle".

  This style will apply to all content on labels.

  //

  Before (re) start the script, you can set a style of object 'SizeLabelObjectStyle '.

  This style of object apply to all executives of the label - so if you want a specific background

  fill out or frame, do it through this object style.

  //

  You can change the units of the size label. I put in inches. Change the line below that has

  kUnitToUse - you can use:

  MeasurementUnits.CENTIMETERS

  MeasurementUnits.CICERO

  MeasurementUnits.INCHES

  MeasurementUnits.MILLIMETERS

  MeasurementUnits.PICAS

  MeasurementUnits.PIXELS

  MeasurementUnits.POINTS

  //

  By default the script will not attempt to label the "nested" images If you also want to label

  nested images (for example inline images, anchored frames, pasted images in the images,...) to change the line

  below to read:

  kLabelNestedItems = 1

  //

  If you want a specific image to stay without a label, you can use the Script label palette for

  assign a script called 'ignore' for this frame. The script will then not label this framework to the

  the title of the script is removed again.

  //

  Change the lines with kDontLabelImageFrames, kDontLabelTextFrames, kDontLabelOtherFrames

  below if you want to restrict labelling to only certain types of images: replace the '0'

  in "1" to enable these options.

  //

  Change the line with kShowImageFileName if you also want to display the names of the image in the

  size for the picture frames.

  //

  Small frames are not labelled - the cutoff point is currently a less than 0.1 inch high framework

  or 0.1 inch wide. You can change the cutoff point by adjusting the lines with kDontLabelBelowWidth

  or kDontLabelBelowHeight below.

  //

  var Girard;

  var gScriptFile;

  var gCaches;

  // ****************

  That's cheating spread automatically calculated

  var doc = app.activeDocument;

  doc.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.inches;

  doc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.inches;

  PageWidth = doc.documentPreferences.pageWidth var;

  stucture var pagewidth = * 2;

  var spreadheight = doc.documentPreferences.pageHeight;

  var spreadsquinch = stucture * spreadheight;

  Alert ("the total measure of square inch of spread is:" + spreadsquinch);

  //******************

  VR;

  {

  If (app.activeScript instanceof file)

  {

  var gScriptFile = app.activeScript;

  }

  }

  catch (Girard)

  {

  }

  If (typeof (kLogLevel) is "undefined")

  {

  const kLogLevel = 5;

  const kMaxLogNestLevel = 5;

  const kLogToMessageBox = 0;

  const kLogToConsole = 0;

  const kLogToFile = 0;

  const kLogFileName = "PercentageLabels.log";

  const kIgnoreFrameLabel = "ignore."

  const kSizeLabelLayerName = "PercentageLabels";

  const kLabelNestedItems = 0;

  const kDontLabelImageFrames = 0;

  const kDontLabelTextFrames = 1;

  const kDontLabelOtherFrames = 0;

  const kUnitToUse = MeasurementUnits.INCHES;

  const kShowImageFileName = 0; This set to 1 to precede the name of the image file in the tag

  Below all of the measures are expressed in kUnitToUse (e.g. inches if MeasurementUnits.INCHES is used)

  const kRoundToDecimals = 2;

  The separator to use between objects - for example MyImage.jpg - 7.22 x 9,34

  const kSeparatorBetweenNameAndSize = "-";

  const kSeparatorBetweenHeightAndWidth = "H x"; "

  const kSeparatorAfterWidth = "W";

  const kDontLabelBelowWidth = 0.1; In kUnitToUse

  const kDontLabelBelowHeight = 0.1; In kUnitToUse

  const kLabelStyleName = "SizeLabelStyle";

  const kLabelObjectStyleName = "SizeLabelObjectStyle";

  const kLabelHeight = 0.6; In kUnitToUse

  const kLabelWidth = 2.5; Expressed in kUnitToUse (e.g., inches).

  }

  var gRunState =

  {

  logToMessageBox: kLogToMessageBox,

  logToConsole: kLogToConsole,.

  logToFile: kLogToFile,.

  functionNestLevel: 0,

  logFunctionEntry: true,

  logFunctionExit: true,

  logLevel: kLogLevel,.

  logFileName: kLogFileName

  };

  Main();

  // ****************

  function ConvertToFrame (thePageItem)

  {

  / * / / / LogEntry ("ConvertToFrame");

  var retVal = thePageItem.getElements () [0];

  / * / / / LogExit ("ConvertToFrame");

  Return retVal;

  }

  // ****************

  function CollectionToArray (theCollection)

  {

  / * / / / LogEntry ("CollectionToArray");

  var retVal = theCollection.everyItem () .getElements () .slice (0);

  / * / / / LogExit ("CollectionToArray");

  Return retVal;

  }

  // ****************

  function GetImageFile (pageItem)

  {

  / * / / / LogEntry ("GetImageFile");

  var imageFile = null;

  do

  {

  Try

  {

  pageItem = ConvertToFrame (pageItem);

  If (!) (("allGraphics" in pageItem))

  {

  break;

  }

  var allGraphics = pageItem.allGraphics.slice (0);

  If (allGraphics.length == 0)

  {

  break;

  }

  var chart = allGraphics [0];

  var graphic.itemLink = link;

  imageFile = new File (link.filePath);

  }

  catch (Girard)

  {

  }

  }

  While (false);

  / * / / / LogExit ("GetImageFile");

  return imageFile.

  }

  // ****************

  function GetImageName (pageItem)

  {

  / * / / / LogEntry ("GetImageName");

  var imageName = "";

  do

  {

  var imageFile = GetImageFile (pageItem);

  If (imageFile is nothing)

  {

  break;

  }

  imageName = imageFile.displayName;

  }

  While (false);

  / * / / / LogExit ("GetImageName");

  return imageName;

  }

  // ****************

  function GetOuterPageItem (pageItem)

  {

  / * / / / LogEntry ("GetOuterPageItem");

  var retVal = null;

  do

  {

  Try

  {

  retVal = pageItem.parent;

  If (retVal instanceof spread | retVal instanceof Page)

  {

  retVal = pageItem;

  break;

  }

  If (retVal instanceof character)

  {

  retVal = GetOuterPageItem(retVal.parentTextFrames[0]);

  break;

  }

  }

  catch (Girard)

  {

  retVal = null;

  }

  }

  While (false);

  / * / / / LogExit ("GetOuterPageItem");

  Return retVal;

  }

  // ****************

  function LogMessage (message, collapseLines)

  {

  If (gRunState.logToConsole)

  {

  $.writeln (message);

  }

  If (gRunState.logToFile)

  {

  var logFile = new file (gScriptFile.parent + "/" + gRunState.logFileName);

  var now = new Date();

  logFile.open ("a");

  logFile.write (now.toString () + ":"+ message + "\n" ');

  logFile.close ();

  }

  If (gRunState.logToMessageBox)

  {

  Alert (message);

  }

  }

  // ****************

  LogEntry (message) function

  {

  If (gRunState.logFunctionEntry)

  {

  If (gRunState.functionNestLevel < kMaxLogNestLevel) {}

  for (var idx = 0; idx < gRunState.functionNestLevel; idx ++)

  {

  message = "" + message;

  }

  Filled (message + "<", true);

  }

  }

  gRunState.functionNestLevel ++;

  }

  // ****************

  function LogError (message)

  {

  If (gRunState.logLevel > = 1).

  {

  LogMessage ("* ERROR *:" + message, false);

  }

  }

  // ****************

  function LogExit (message)

  {

  -gRunState.functionNestLevel;

  If (gRunState.functionNestLevel < 0)

  {

  LogError ("LogExit: unbalanced nesting of function");

  }

  If (gRunState.logFunctionExit)

  {

  If (gRunState.functionNestLevel < kMaxLogNestLevel) {}

  for (var idx = 0; idx < gRunState.functionNestLevel; idx ++)

  {

  message = "" + message;

  }

  Filled (message + ">", true);

  }

  }

  }

  // ****************

  function LogNote (message)

  {

  If (gRunState.logLevel > = 3)

  {

  LogMessage ("Note:" + message, false);

  }

  }

  // ****************

  function LogWarning (message)

  {

  If (gRunState.logLevel > = 2)

  {

  LogMessage ("WARNING:" + message, false);

  }

  }

  // ****************

  function Main()

  {

  / * / / / LogEntry ("Main");

  var savedUserInteractionLevel = app.scriptPreferences.userInteractionLevel;

  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;

  do

  {

  Try

  {

  activeDocument var = app.activeDocument;

  If (!.) (activeDocument instanceof Document))

  {

  LogError ("hand: activeDocument isn't a Document");

  break;

  }

  var savedHorizontalMeasurementUnits = activeDocument.viewPreferences.horizontalMeasurementUnits;

  activeDocument.viewPreferences.horizontalMeasurementUnits = kUnitToUse;

  var savedVerticalMeasurementUnits = activeDocument.viewPreferences.verticalMeasurementUnits;

  activeDocument.viewPreferences.verticalMeasurementUnits = kUnitToUse;

  var savedRulerOrigin = activeDocument.viewPreferences.rulerOrigin;

  activeDocument.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;

  do

  {

  Try

  {

  ProcessFrames (activeDocument);

  }

  catch (Girard)

  {

  Alert ("the script encountered a situation that we don't know how to handle. "He received the error, says '" + Parker + "' in Main()"); "."

  }

  }

  While (false);

  activeDocument.viewPreferences.rulerOrigin = savedRulerOrigin;

  activeDocument.viewPreferences.horizontalMeasurementUnits = savedHorizontalMeasurementUnits;

  activeDocument.viewPreferences.verticalMeasurementUnits = savedVerticalMeasurementUnits;

  }

  catch (Girard)

  {

  Alert ("the script encountered a situation that we don't know how to handle. "He received the error, says '" + Parker + "' in Main()"); "."

  LogError ("Hand throw" + Girard);

  }

  }

  While (false);

  app.scriptPreferences.userInteractionLevel = savedUserInteractionLevel;

  / * / / / LogExit ("Main");

  }

  // ****************

  function ProcessFrames (doc)

  {

  / * / / / LogEntry ("ProcessFrames");

  var err;

  do

  {

  If (!.) (doc instanceof Document))

  {

  LogError ("ProcessFrames: doc should be a Document");

  break;

  }

  Try

  {

  var existingLayer = doc.layers.itemByName (kSizeLabelLayerName);

  existingLayer.id;

  existingLayer.remove ();

  }

  catch (err)

  {

  }

  If (kLabelNestedItems)

  {

  var pageItems = doc.allPageItems.slice (0);

  }

  on the other

  {

  var pageItems = CollectionToArray (doc.pageItems);

  }

  var frameReferences = [];

  for (var pageItemIdx = 0; pageItemIdx < pageItems.length; pageItemIdx ++)

  {

  do

  {

  var pageItem = pageItems [pageItemIdx];

  If (pageItem.itemLayer.name is kSizeLabelLayerName)

  {

  break;

  }

  var pageItem = ConvertToFrame (pageItem);

  If (instanceof TextFrame pageItem)

  {

  If (kDontLabelTextFrames)

  {

  break;

  }

  }

  ElseIf (pageItem graphic instanceof)

  {

  If (kDontLabelImageFrames)

  {

  break;

  }

  }

  on the other

  {

  If (kDontLabelOtherFrames)

  {

  break;

  }

  }

  If (pageItem.label.toLowerCase () is kIgnoreFrameLabel)

  {

  break;

  }

  var width = pageItem.geometricBounds [3] - pageItem.geometricBounds [1];

  var height = pageItem.geometricBounds [2] - pageItem.geometricBounds [0];

  If (width < kDontLabelBelowWidth)

  {

  break;

  }

  If (height, kDontLabelBelowHeight)

  {

  break;

  }

  frameReferences.push (pageItem);

  }

  While (false);

  }

  var sizeLabelLayer = doc.layers.add ({name: kSizeLabelLayerName});

  for (var pageItemIdx = 0; pageItemIdx < frameReferences.length; pageItemIdx ++)

  {

  Try

  {

  var pageItem = frameReferences [pageItemIdx];

  var width = pageItem.geometricBounds [3] - pageItem.geometricBounds [1];

  var height = pageItem.geometricBounds [2] - pageItem.geometricBounds [0];

  var labelItem = doc.textFrames.add (null, LocationOptions.BEFORE, GetOuterPageItem (pageItem));

  labelItem.itemLayer = sizeLabelLayer;

  var boxsquinch = width * height

  var boxpercent = (boxsquinch / spreadsquinch) * 100

  var roundpercent = Math.round (boxpercent)

  var labelText = "";

  If (kShowImageFileName)

  {

  var imageName = GetImageName (pageItem);

  If (imageName! = "")

  {

  labelText += imageName + kSeparatorBetweenNameAndSize;

  }

  }

  labelText += RoundString (height, kRoundToDecimals) + kSeparatorBetweenHeightAndWidth + RoundString(width, kRoundToDecimals) + kSeparatorAfterWidth + ' \r\n'+ roundpercent + '% ';

  labelItem.contents = labelText;

  xPos = pageItem.geometricBounds var [1];

  yPos = pageItem.geometricBounds var [0] + kLabelHeight;

  labelItem.geometricBounds is [Posy, xPos, yPos + kLabelHeight, xPos + kLabelWidth];.

  Try

  {

  labelItem.parentStory.characters.everyItem () .appliedCharacterStyle = doc.characterStyles.item (0);

  }

  catch (err)

  {

  }

  Try

  {

  labelItem.parentStory.paragraphs.everyItem () .appliedParagraphStyle = kLabelStyleName;

  }

  catch (err)

  {

  }

  Try

  {

  labelItem.appliedObjectStyle = doc.objectStyles.itemByName (kLabelObjectStyleName);

  }

  catch (err)

  {

  }

  }

  catch (err)

  {

  }

  }

  }

  While (false);

  / * / / / LogExit ("ProcessFrames");

  }

  // ****************

  function RoundString (numVal, decimal)

  {

  / * / / / LogEntry ("Round");

  var retVal = Math.round (numVal * Math.pow(10,decimals)) + "";

  retVal = retVal.substring(0,retVal.length-decimals) + "." + retVal.substring(retVal.length-decimals);

  / * / / / LogExit ("Round");

  Return retVal;

  }

  What do you mean?

  var myDoc = app.activeDocument;
  var mySpreads = myDoc.spreads;
  var myRectangles = myDoc.rectangles;
  var myImages = 0;
  for (var i = 0; i < mySpreads.length; i++) {
      var mySpreadWidth = 0;
      var mySpreadHeight = myDoc.documentPreferences.pageHeight;
      for (var j = 0; j < mySpreads[i].pages.length; j++) {
          mySpreadWidth += myDoc.documentPreferences.pageWidth;
          }
      var mySpreadArea = mySpreadWidth * mySpreadHeight;
      var myImages = mySpreads[i].rectangles;
      var myTotalImageArea = 0;
      var myIndividualImageArea = [];
      for (var j = 0; j < myImages.length; j++) {
          var myImageGeometricBounds = myImages[j].geometricBounds;
          var myImageWidth = myImageGeometricBounds[3] - myImageGeometricBounds[1];
          var myImageHeight = myImageGeometricBounds[2] - myImageGeometricBounds[0];
          myIndividualImageArea[j] = (myImageWidth * myImageHeight);
          myTotalImageArea += myIndividualImageArea[j];
          }
      for (var j = 0; j < myIndividualImageArea.length; j++) {
          alert("Image percentage of total images on spread " + (i + 1) + " = " + (myIndividualImageArea[j] * 100) /myTotalImageArea);
          }
     alert("Total image percentage on spread " + (i + 1) + " = " + myTotalImageArea);
     }
  

• development module when I change something with correction of the area I can't move to the next image with the right arrow key

  Hello

  I work with the module development and when I change something with correction of the area I can't move to the next image with the right arrow.

  Is there a solution?

  Norbert

  I think that Yes you are talking about "Spot healing.

  So once you have used the tool, please click "Fertig" at the bottom right of the image.

  Try, and then use the arrow keys.

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• dynamic link does not connect with the aftermath?

  Dynamic link does not connect with the aftermath?

  Hi Robert,.

  Dynamic link works between versions of similar applications. Make sure you have the same version of both applications.

  For example, Premiere Pro CC 2015 won't work in dynamic link with after effects CC 2015

  First Pro CC 2014.2 will work in dynamic link with after effects CC 2014.2 and so on...

  Thank you

  Regalo