Problems with the data connection

Similar Questions

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problem with the DATA types, in a UNION

  Hello
  I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
  I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
  
  SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
  H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1
  
  UNION ALL
  
  SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
  OF THE DOUBLE
  If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
  OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1);
  
  
  ORA-01790: expression must have same type of data, matching expression
  01790 00000 - "expression must have the same type of data, matching expression.

  DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis

  What is the data type for these columns

  To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0

  What you're doing here 'test' is already a character. Why do you use TO_CHAR?

• problems with the date picker

  I found some problems with the date picker to make my first presentation of object BPM.
  
  I created a group with a datetimestamp it contains. When I click on it in run mode, it will bring a new tab in the browser. This behavior is different from that of a date picker outside a group where there just a small javascript popup.
  
  Anyway around this problem?
  
  Also, would be nice if could be set by default to the current date. is there a way to who?
  
  For the component "time" it seems impossible to define the default value - at least on the tab object structure.
  
  Thank you

  Try to set the property "DHTML" to control date Yes. This option is under the Properties tab-> the calendar section. This will force it to use the popup javascript on screen instead of opening a new browser window/tab.

  To set a default value for a date/time, you can simply set the value in the constructor of the BPM object in which the property is located.

• Problems with the date in the procedure on Oracle 11 g

  Hi gurus,
  
  I have some problems with the date under Oracle 11 g format.
  
  Let me explain the situation:
  
  When I start such a request
  Select to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'))
  of sys.dual
  
  I had as a result 2009 under the number.
  
  When I do the same thing in a procedure of a package like this
  
  my_year: = to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'));
  
  the my_year variable contains the value 9 instead of 2009.
  
  Can someone explain to me what goes wrong?
  
  I just tested with the evolution of the variable nls_date_format of environment for the session and the database is complete without success.
  
  Kind regards
  Björn

  Yes, it has everything to do with your environment settings.

  SQL> set serveroutput on;
  SQL>
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01-MAR-98
  
  PL/SQL procedure successfully completed.
  
  SQL> alter session set nls_date_format = 'dd.mm.yyyy hh24:mi:ss'
    2  /
  
  Session altered.
  
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01.03.1998 07:00:00
  
  PL/SQL procedure successfully completed.
  

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1

• When I try to record photoshop mi account, there is a problem with the internet connection and I can't continue. How can I solve it?

  I bought a book on Photoshop CS many years ago, and once I installed it in my computer it says I should I enroll the account in order to use Photoshop (or something similar), and it also has a link to go directly to the website of the registry. The problem comes when I try to access this link given, which is an internet link. It appears that my Internet connection is not secure, so I'm not allowed to continue the process, even if I don't really no problem with the connection. As I'm talking about an older version of Photoshop CD, the problem might be that something related to the incompatibility with my version of microsoft. How can I solve this problem, if there is no possible solution?

  Hello

  You can try to use a different browser for this. You can also save the product key by following the steps

  (1) connect to Adobe.com/accounts

  2) click on the plans and the product.

  3) click view your products.

  (4) enter your serial under register no. your products

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• Problems with the socket connection

  Hello

  I am trying to connect to socket between blackberry and pc Simulator, so that blackberry and pc can talk back.

  However, I found that only the first data sent from blackberry can be received by server successfully.

  When the server tries to turn the blackberry, he failed.  (Survey net.rim.device.cldc.io.ippp.SocketBaseIOException: Connection Timed Out)

  And the blackberry cannot send data to the server successfully.

  I am using BlackBerry MDS Services and write the customer after the demonstration ConnectThread.

  String url = "socket: / /" + socketServer + ":" + socketPort + "; deviceside = false;
  connection = (StreamConnection) Connector.open (url);

  Can help any one on this? Thank you!

  I tested the SocketDemo with completely the example code, server and client.

  In fact, it should be the same problem with this thread,

  http://supportforums.BlackBerry.com/T5/Java-development/another-socket-problem-socket-is-not-receivi...

  My own app can work very well after replacing InputStreamReader InputStream...

• Toshiba 46WL768 - problem with the HDMI connection

  Hello, my problem is the following:
  I have a Toshiba Regza TV 46WL768.
  I bought a Qviart Unic satellite receiver and when I connect to HDMI does not recognize.

  I tried another TV with HDMI decoder and works perfectly.

  I tried different HDMI toshiba configurations and does not.

  Connect another device via HDMI to the TV toshiba and if it works.
  I hope you can help me. Thanks in advance.

  If I understand you just all your TV's HDMI ports are working properly, no?
  In this case, you must contact Qviart Unic support and ask what may be the problem.

• Problems with the internet connectivity and support

  I have a HP Pavilion Elite HPE-510y running Windows 7 service pack 1, 64-bit, and now I'm having problems with getting updates requiring internet to install. There is nothing wrong with the router of my family. I tried to put my desk right next to the router since I use a wireless connection, it did not work. Not even when I plugged the router it still didn't work. Diagnosis, troubleshooting and self-help does not identify the problems that are there. There is no sign of the virus. I tried toggling with the security, firewalls, options and reconnect to the internet. Nothing is fixed. Windows is unable to use the online services. Flash Adobe updates do not install limit I can watch YouTube amout. Norton Antivirus will not install updates with Liveupdate and difficulty of internet connectivity. I can't go through the itunes store. I can't even get the Microsoft Word dictionary. Whenever it is said, I don't have an internet connection, and I can always look up on the web, no matter how far I am. Cela and cannot load configuration error 8921-251 which. Windows updates always work for some reason any. I am at a total loss and spend nights trying to figure it out. I could really use some help.

  It seems that this Norton Security...

  «LiveUpdate_solved"in «Norton 360"»

  The article of the author "rab60" contains detailed instructions on the Live Update solution.

  You could try a more thorough search of Norton Community Forum... I do not use Norton and cannot comment on if none of the solutions work.