BB10-Release Version

Similar Questions

• BB10 existing app PlayBook release version number

  Are there requirements / conventions / best practices for the version number of an application brought on a new platform?

  My existing PlayBook application went through several updates and now is 1.1.2. BB10 new version contains some new features (specific BB10), so in that regard, it should be more, but at the same time, this is the first ever BB10 version with a new set of potential bugs (well, I hope not - but because it has not yet been tested on a complete system of BB10, I guess that things could go wrong) , so in that respect, it's more than a 1.0 version...

  Any thoughts? Is it important for the supplier portal? (perhaps he will not yet you provide a version number below for the same inclination...?)

  Thank you

  Anna

  My app: Get set - get up!   Get ready for the revolution snooze.

  The version number is important only for your records and to show the public that his new. I wouldn't worry about this at all.

• Race of library slow when Alchemy app disabled in the Release version

  Hello

  I'm working on an application that an operation running through a library of Alchemy (written in C and exposed as .as) long.

  Here are the high-level logic to illustrate the idea:

  QNXSystem.system.inactivePowerMode = QNXSystemPowerMode.NORMAL;

  addEventListener (AlchemyLibraryEvent.PROGRESS, onProgress);

  addEventListener (AlchemyLibraryEvent.COMPLETE, onComplete);

  Call the library of Alchemy;

  private void onProgress(event: AlchemyLibraryEvent) {}

  update of the progress made in the user interface;

  }

  private void onComplete(event: AlchemyLibraryEvent) {}

  QNXSystem.system.inactivePowerMode = QNXSystemPowerMode.STANDBY;

  If app is in {disabled state

  QNXSystem.system.powerMode = QNXSystemPowerMode.STANDBY;

  }

  }

  In the bar-descriptor:

  run_when_backgrounded

  What happens is that the app works perfectly well (no matter the app is active, put off the power, the unit standby) in a debug build (by token of debugging).  However, when it is exported as a signed bar and running on the same physical device BB10, it normally only works when the application is active.  Whenever the application is disabled (when the screen is off, or app pushed back and another application is brought to the foreground), the application runs always, but at a very slow speed (about 1/15 of the original speed).

  I did some debugging and confirmed that when the application is disabled, she was continuing with NORMAL power at the rate of 60 frames per second, which seems to be quite normal.  What I don't understand is why the chemistry library runs a lot slower in the background in the Release version.

  As a proof of concept, I added the following code just before inactivePowerMode to NORMAL:

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  The build version will run at normal speed and the screen turn off.  However, if I press the device power button, or push the app thoroughly (and make another application in the foreground), he repeats the same behavior running slowly.

  Any ideas would be much appreciated!

  No, there is no way to take more CPU power when in the background. The operating system applies this to the user, so they have no apps churning through their battery on them. I would recommend that you inform users of this, so they can decide what they want to do. BlackBerry 10 is expected for the multitasking well, so I expect that they will enjoy and put the application in the background.

• Do not download Firefox 35 (Release version)

  The Release version of Firefox 35 download, the guest machine to start the download fails simply start the download it, even when I go to the about page (help > on Firefox). I participate in the beta chain. Does the notification of update Firefox 35 in error/wrong sooner than expected?

  It's a release candidate and not the official version.

  • https://wiki.Mozilla.org/releases#Upcoming_Releases
  • https://wiki.Mozilla.org/Firefox/planning/2015-01-07

• Pre-release version of vista will expire...

  Pre-release version of Windows vista will expire in 0 hours message comes back on my computer.  I googled and saw the re - install SP2 "Difficulty" I tried to do... My computer says that it is 'Service pack 2, v.286,' I went to the Microsoft Download site and downloaded the right version of SP2, which I tried to run but I got the "you must delete all versions SP2 previuosly installed on your computer.  I tried to uninstall it using the element programs and features in Control Panel, but there was no update SP2 listed... so then I try to uninstall it by using the system restore, which gives you two options A) If you have the Vista CD, DVD or B) If you do not have the Vista CD/DVD; (which I did not) I follow the directions until he tells me to "choose a restore point" and I, according to the indications, am supposed to select the service pack of Windows Vista installation dates but it lists only updates since 10/03/2010, and all of them are just listed as windows updates not Windows Vista Service Pack... Can anyone help?  I bought this Acer laptop in July 2008 and he had all the software installed on it. It did not come with discs or anything.  I have spent a whole day trying everything and didn't get anywhere!  Thanks in advance!

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab, and then click copy (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the appropriate forum of Microsoft Genuine Advantage and paste the WGA tool results in a detailed post: http://social.microsoft.com/Forums/en-US/genuinevista/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pre-release version of Windows Vista will expire

  I had to download this version of Vista on my HP computer as one that came on the computer was so buggy it was unueable most of the time. I now get a message telling me that "this pre-release version of Windows Vista™ Home Premium will expire in 0 hours.

  I tried to update using Windows update with nothing to show for it. I tried to download SP1 and SP2. 1 said that already on the 2 that I need to uninstall the current version of Vista to do this. And uninstallation of Vista to Vista on sounds a little destructive. Help...

  Contact HP support or post here to get help: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  NB: Do NOT use the 'version of Vista' you downloaded! If your HP computer came not with a set of disks when you bought it, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install. Contact HP support for assistance.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Headless app - Release version

  Hi guys

  It's time I was here there is .

  I have a little problem. With app without a head. I create myself a project of default app model headless in Momentics IDE.

  Make changes, because I need the monitoring of calls. Everuything works if I run the IDE app, all functions, process headless, etc...

  But... If I create a BAR as a "Release Build" file and install it on the phone DON'T WORK.

  Process without head told me, which is started. If I also check the monitor process and device then there is, but nothing WORKS.

  You guys have some ideas where could be the problem why the app stop working in the Release version?

  THX

  Jesus, I'm real BFU 

  Problem solved. I have permissions for control of phone etc. within a request not to the Headless entrypoint process entry point. So I just moved them.

• How to write image files in the current folder in the Release version

  I'm able to do in the sims and on real devices in debug mode, but for some reason when I'm building a Release version I can not write in the current folder. I get write errors.

  I want to write the image easily in qml files in this folder as read when I write in the current folder.

  Write to the data directory instead - unable to write to the application folder & active

• Debugging in the Release version

  Hello world

  my new app uses a card to process the data. The data processor triggers a signal and slot this respons by closing the card. Well, at least while debugging. I tried the release just before you download for the BlackBerry World and I noticed that the card don't be closed. Data are transformed very well, but somehow the signal is not properly raised or the card cannot be closed. I have attached a bit of code to illustrate my operation.

  The processing of the data

  void WebpageFetcher::done()
  {
      DbHelper* dbHelper = DbHelper::getInstance();
      dbHelper->insert(some data);
      //Signal that we're done!
      emit fetchDone("Success!");
      delete dbHelper;
  }
  

  The Application

  fetcher = new WebpageFetcher(uri);
  connect(fetcher, SIGNAL(fetchDone(QString)), this, SLOT(fetchingDone(QString)));
  

  void ApplicationUI::fetchingDone(QString msg)
  {
      // Assemble message
      CardDoneMessage message;
      message.setData(msg);
      message.setDataType("text/plain");
      message.setReason("Success!");
      // Send message
      m_invokeManager->sendCardDone(message);
  }
  

  Now my question is: How can I see the output in Release version? qDebug will obviously not work, but I need a tool to help me understand this issue.

  Looks like the culprit was "build automatically" neglected my amendments to the code for the Release version. Although 4 wasted hours, could be worse

• Best/Recommended way to record information in the Release version

  Hello

  I've searched around, but don't see any results on the issue yet. Then I would ask what is the best/recommended way to record Release version information?

  I use Momentics IDE 10.2. When I choose run or Debug, qDebug() & qWarning display information very well in the console of the IDE, but with "run" they don't show anything in the console. Tested on both Q10 & Simulator.

  Thank you

  Install your own messages QDebug Manager, do write to a file, for example newspapers newspaper. Then open a terminal on the device, navigate to the file and the type of your application:

  # tail -f logs/log
  

  to view the log file.

  Change your main.cpp along these lines:

  #include 
  
  static FILE * logFile;
  
  void logger(QtMsgType type, const char * msg)
  {
      Q_UNUSED(type);
      std::fprintf(logFile, "%s\n", msg);
      std::fflush(logFile);
  }
  
  Q_DECL_EXPORT int main(int argc, char **argv)
  {
      logFile = fopen("logs/log", "a");
      qInstallMsgHandler(logger);
      Application app(argc, argv);
  
      // Create the Application UI object, this is where the main.qml file
      // is loaded and the application scene is set.
      new ApplicationUI(&app);
  
      // Enter the application main event loop.
      return Application::exec();
  }
  

  Note: the file will be closed by the operating system, more messages are seen if you don't shut it down at the bottom of the hand. Why? because c is destorying local variables (app) at the end of the main, and who calls the string whole qt of parent-child destructor for your class of application as well.

• When it will be released version 6.3 of the PIX software?

  When it will be released version 6.3 of the PIX software?

  If all goes well at the end of this month or early April. Keep control on the BCC for the software, you will commit to the standard repository of PIX.

• problems with the replacement of the trial with the full released version

  So invited a new Member of the team and the members is now showing as active. Downloaded as required but the message of the trial has not disappeared and it does not appear that the fully released version has updated correctly / replaced the trial.

  Are passed through the same thing with another Member of the team and everything worked well.

  What is going on?

  Hi Ewa,

  Please see this document to activate it:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Let us know if that helps.

  Concerning

  Megha Rawat

• Remove the pre-release version of CS6

  I try to install CS6 in an Apple.  I get an error message to remove the pre-release version.  I can't find.  Where should I look?

  Hello

  One solution is to run the cleaning and re - install everything from a clean slate.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Thank you

  Kapil Malik

• Help, please! White screen IOS Release version

  IM do crazy for it, but when I export the Release version and install the application on my iphone, I get just the splash screen. The debug version works well in the iphone and the Simulator.

  I'm using Flash Builder 4.6

  Please help me

  Thank you

  Hello

  of course, you can!

  On your mobile phone, as you do with the debug!

  You should always try the Release version!

  I found my bug in the debug version worked perfectly.

  Have a look here

  http://forums.Adobe.com/message/4516888?TSTART=0

  It was the same for me!

• Conditional with Ant (withdrawal, the Release version of debugger instrumentation code)

  I started to try the MonsterDebugger of. On the first thing that comes to my mind was the instrumentation code and have it in the Release version of the application.

  Does anyone have a good tip on how to make a conditional generation with Ant to remove this code?

  Unit tests are easy to remove by the exclusion of the name of file, since the tests do not alter the unit under test, but for the debugger, I need to at least import the debugger class and instantiate in the code.

  Thank you.

  You mean like this: http://livedocs.adobe.com/flex/3/html/compilers_21.html ?