BD/DVD only gets speaker TV sound when connected to 1030 STR - DN

Similar Questions

• No sound when connecting my new XPS 9530 to my TV with a HDMI cable

  I got my new laptop XPS 9530 for 3 weeks now and can't get any sound when connecting it to my TV with an HDMI cable.  I struggled to find a solution that works so far.  I tried so many solutions for example suggested, I went to SOUND / playback devices and the only option is to Audio speakers (Realtek High Definition) but not option for HDMI. I have re-installed video and audio drivers but still no success.

  The worst is that I sent to Dell Support FOUR times without reply after that initial automated response.

  Hello, I had the same problem on my XPS 9530 but it corectly established after a few moments, fundamentally sound has been activated later than the video.
  In any case, you can still use Windows troubleshooting utility, or what I would sugest is to test it on another TV and give him a few minutes and then also try another HDMI cable, your current version is perhaps too old or something.
  BTW do you have updated the video drivers intel and nvidia? If not, please do so.

  One last thing, if you get no response from email support you can always make a phone call if your problem is urgent.  ;)

• When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".

  When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".

  Hello

  We apologize for the inconvenience. The site is under maintenance at the moment, the concern team strives to resume the services soon.

  Kind regards

  Christian

• I don't get sound when connecting my LED TV to my laptop under windows 8

  Hello

  I have a laptop HP with windows 8. When I try to connect it to my LED tv using a HDMI cable I get the picture but the sound comes from the laptop only, not LED TV. I don't know the reasons. If anyone can help get the sound on my LED TV.

  Thank you

  Hi Ram,

  I understand that when you connect to LED TV to your Windows 8 HP laptop using an HDMI cable, you get the picture on the LED screen but sound comes only from the laptop. There is no sound in LED.

  This problem can be caused if the digital audio HDMI is disabled. Please follow the provided steps and check to see if that solves the problem:

  Method 1: Activate digital audio HDMI:

  Follow these steps to enable digital audio HDMI:

  (a) the speaker icon on the right side of the taskbar on the right click desktop background.

  (b) click on playback devices

  (c) right click Digital HDMI audio and then click Activate.

  (d) put a check mark: Show disconnected devices and see the disabled devices.

  (e) check if you get audio on the led connected to the laptop via a HDMI cable.

  Method 2: Check if the cables are connected properly:

  See the section under step 2 HDMI cables in the following link:

  No sound in Windows:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope, it helps to solve the problem, if you have any other questions relating to Windows 8, do not hesitate to post.

  Kind regards

• No sound when connect you external speakers

  original title: external speaker problem

  I have a small speaker set external USB connected to my laptop.  Recently, I disconnected them and change the sound settings to use the laptops speakers.  When I plugged the speakers external back in, I have no sound.  There is no installation CD and my drivers seem to be OK, although I'm not sure.  I search for drivers and everywhere that I go I thought that my audio drivers are up to date.  Help!

  Hi, George,

  I am happy to know that the problem is resolved, the problem related to the system restore, I ask allows you to create a new thread to help you better. You can create a new topic by clicking on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp

• How can I get a full screen when connecting to the internet, my screen display 1/4 when it is connected to the internet. I then optimize it

  How do I get a full screen when I connect to the internet, my screen appears1/4 screen when I connected mthen should maximize it?

  Three options.

  1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.

  2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".

  3: IE New Window Maximizer
  http://www.MajorGeeks.com/IE_New_Window_Maximizer_d1746.html

• When I use sound recorder she either got nothing or only get a clunking sound from my voice barely audible. Help!

  I have the microphone at full volume, and yet the bar of his "green wave" "does even not that is to hear anything. When I hit "stop recording" and save the file, it is silent on the reading, or what I just recorded, but it is seems muffled and far away. It's driving me crazy, frankly

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned below and check if that helps:

  Method 1:

  Open the troubleshooting of Audio recording

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Troubleshoot audio recording

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems# (Also applies to Windows 7 as well)

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  Let us know if it helps.

• can not get sound when connected to the tv viahdmi

  I'm trying to find the audio and graphic drivers for my compaq 8510p.

  I tried all of the recommended things

  Hi nrob7208,

  Welcome to the Forums of HP Support!

  I understand that you do not get sound from your HP Compaq 8510p Notebook PC, and you want the graphics and audio drivers. He is a professional computer, and you will get the best results for your question, here, to the HP Enterprise Business Community.

  I hope this helps.

  Thank you and have a great day!

• Only get a blinking cursor when you try to start after the installation of updates

  Original title: blinking cursor when you try to start

  After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start

  Hello

  1 update you tried to install?

  Step 1:

  You can check out the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• How can I get the computer 'sound' when a new message is received?

  I wish I had the laptop beep to warn me that received a new email.  How do I configure that?

  Depends on the e-mail application that you use.

• Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

  Hello

  I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
  I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

  I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
  Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

  I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

  Anyone have any ideas?

  Thank you
  Jen

  This means you have a perfect television image after activating the HDMI port but the problem is its only?

• No sound when connect you TV to HDMI on my Satellite port has

  When I connect my laptop to my TV I get the display to work but no sound.

  I read where a lot of people with all types of computers have this problem, and most of them just default playback to the SPDIF thing.

  But when I do it still does not work.

  Can someone help me.

  I had problem of thersame, then follwed the indtructions on the link below:

  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

  This document is written for Qosmio laptop but the principle must be the same, if that doesn't work try FN + F5, you should had video and sound on the LCD screen and a white screen on the laptop.

  Hope the above helps.

• No sound when connected to headphones or external speakers

  on my laptop dell, a lot of times that I can't get sound on the computer speakers, but when I connect it to external speakers or headphones, I sometimes sounds and most of the time not.

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  It will be useful.

• I get a black screen when connecting to my TV

  PC to TV resolution problem?

  I bought a pc specifically if I could play the star wars: the old Republic game on my TV. I have connected the pc to the tv using a vga to hdmi. As a first step, that it worked fine. Then tried to play the game and the screen went black. I tried to change the resolution on the pc and now the pc when run in normal mode will only show a black screen after startup. It will run in safe mode with screen works fine. I tried different resolution setting and none seem not to work. I tried to look online for answers and saw someone suggested an app called powerstrip, so I managed to download that but can't run it in safe mode to see if it will be useful. How can I fix this so I can use the pc and play the game without a black screen?

  I forgot the exact dimensions of my tv, but it's about 45 ".
  Resolution of 1080 RCA
  I can't change the resolution of the TV.
  The PC is a refurbished HP Pavilion Slimline
  4 GB memory
  1 TB harddrive
  Processor Intel Pentium G630 at 2.7 GHz
  Intel HD integrated graphics
  Windows 7

  I looked at the model number for the TV. Here is the link to the specification for it on the RCA Web site.  http://rca4tv.com/product/spec.asp?modelnum=46LA45RQ

  I don't see anywhere to change the rate of resolution or refresh in the menu tv. When I go the part 'photo' of the menu it shows that

  You wouldn't change it on the TV.  ;-)  You must set your output video is that the TV can display.

  I suggest first - go VGA VGA if possible.  Go by what you presented (with some hypothesis, I am about to say), you have a few VGA HDMI adapter... So you get out of your VGA computer and go to your HDMI TV?  Given that the TV has VGA - VGA to go.  If your computer has HDMI - you might as well go HDMI to HDMI, but best results will probably come out VGA to VGA input.

  

  Inexpensive and probably work best for what you need.

  Looking around, this computer can do the following computer resolutions:

  • 1280 x 1024 (SXGA)
  • 640 x 480 (VGA)
  • 800 x 600 (SVGA)

  Another thing - it probably will result in what you see.

• No sound when connecting the Macbook Pro to ext speakers.

  I have a MacBook Pro (retina, 15 ", mid-2014) running OSx 10.11.6 (El Capitan).

  It has a combined audio port 1/8 "for two speakers and a microphone. The internal speakers work very well and the port works very well with a helmet. What does not work must connect external powered speakers like the computer speakers or the port on a radio. It worked perfectly with all other computers that I have ever owned, and judging from the page linked below it should work for this computer, too, so what's the problem?

  Connect your Mac to a Hi-Fi, iPod, iPad, musical instruments or loudspeakers - Apple Support

  I tried it with a 1/8 "cable this single sound of the door (no tape for micro), and (when it does work), I tried to first insert an adapter that split the audio and microphone, but it does not solve the problem.

  How to make this work?

  I found the problem. When I plugged a cable into the headphone jack, the Mac automatically turned to the low volume - assuming I have connect headset. This is why I couldn't hear it. I open the sound applet in the system area and pushed back the volume of output to the top and voila - fixed.