Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

Similar Questions

• no signal when connecting my HP 2000-2d51SV via HDMI to my tv LG

  Hello

  I have connected my HP 2000-2d51SV laptop to my LG TV, but I get a reply that there is no signal.

  I tried Control Panel of the laptop, but I do not see the tv as additional monitor.

  On the TV, the HDMI port can be pressed (is not blury as other ports with no cable connected)

  I also tried the other TV HDMI ports

  I have windows 7 installed.

  Help, please!

  Thanks in advance

  Pantelis

  Hello, @pantelis73

  It seems that you have a problem with the connection of the laptop to a TV for use as an external monitor. I will try to help you with this.

  Connection to a TV or monitor to your Windows 7 PC using HDMI - try the steps outlined in this document. If you do not also try another cable.

  I would like to know how this happens.
  Thanks for posting on the HP Forums.

• I'm unable to change the video settings on my TV connected to my computer laptop nv55s Gateway via HDMI.

  I have a laptop Gateway nv55s and I used a Slyvania 32 '' lcd Tv and my secondary monitor via a Hdmi cable. I was out of my house and when I came back the video has not been more appearing on my TV. I went to change my video settings and it detects my TV, but it does not reproduce the image? What could be my problem?

  P.S. I'm not very tech Savy.

  Original title: gateway HDMI NV55S detects the TV but not photo duplicate

  I tried all 3 ports on my tv, but nothing has worked. I started messing around with my wireless keyboard and the keys of my laptop keyboard. Also twirling some cords on the back on my TV and then it worked. Don't know what I was doing, or how I did, but now he works once more. Thank you very much for your help.

• No sound when connecting my new XPS 9530 to my TV with a HDMI cable

  I got my new laptop XPS 9530 for 3 weeks now and can't get any sound when connecting it to my TV with an HDMI cable.  I struggled to find a solution that works so far.  I tried so many solutions for example suggested, I went to SOUND / playback devices and the only option is to Audio speakers (Realtek High Definition) but not option for HDMI. I have re-installed video and audio drivers but still no success.

  The worst is that I sent to Dell Support FOUR times without reply after that initial automated response.

  Hello, I had the same problem on my XPS 9530 but it corectly established after a few moments, fundamentally sound has been activated later than the video.
  In any case, you can still use Windows troubleshooting utility, or what I would sugest is to test it on another TV and give him a few minutes and then also try another HDMI cable, your current version is perhaps too old or something.
  BTW do you have updated the video drivers intel and nvidia? If not, please do so.

  One last thing, if you get no response from email support you can always make a phone call if your problem is urgent.  ;)

• Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

  Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

  Hello

  1. If it works well before?
  2. Did you of recent changes to the computer before the show?
  3. What happens when you connect the VGA cable to TV to the laptop screen?

  I suggest to refer to the article and perform the steps mentioned there.

   

  How to configure and use multiple monitors in Windows XP:

  http://support.Microsoft.com/kb/307873

   

  Reference:--

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

   

   

   

• When connecting my laptop to a TV LCD TV screen has scattered green lines

  I have Sony Vaio S13118GAB and TV LCD Sony laptop, I have connected my laptop to TV cable HDMI sound is perfect and the image is there, but there are a lot of green lines on my tv screen. How to fix that and make the image more clear and free of these disturbing green lines on-screen?

  have you tried another HDMI port on TV or another HDMI cable?
   
  If you have done the above and tried different screen resolutions and have the
  latest for your video card driver, you should contact Sony support.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• No sound when connect you TV to HDMI on my Satellite port has

  When I connect my laptop to my TV I get the display to work but no sound.

  I read where a lot of people with all types of computers have this problem, and most of them just default playback to the SPDIF thing.

  But when I do it still does not work.

  Can someone help me.

  I had problem of thersame, then follwed the indtructions on the link below:

  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

  This document is written for Qosmio laptop but the principle must be the same, if that doesn't work try FN + F5, you should had video and sound on the LCD screen and a white screen on the laptop.

  Hope the above helps.

• Satellite P300-275 - Crash when CPU at full load

  Hello everyone

  I have a Satellite P300 - 275 (PSPCCE) and a big problem after maintenance rear.

  When i games (average after 15 min Details CSS, ops black 15 min, 15 min bulletstorm...) and CPU it fully charged, my computer crash and I have to wait a few minutes before resuming.

  I'm doing some tests, but I don't know how it can solve the problem.

  -Test Prime95 (connected)
  Tested during a night and no problem, no crash
  http://ImageShack.us/photo/my-images/829/resultats.jpg/

  -Test OCCT (connected)
  Being tested for an hour, the temperature rose to 90 ° C but no problem, no crash

  -Test Memtest86 + (connected)
  I tested the two strips together and then each band separately and the pc crashed after 10 minutes (2x2gb DDR2-800)

  -Test FurManrk
  -He led for 15 min, 4 average fps on battery, no problem!
  -It ran for 30 seconds, 8 average FPS with battery and crash!
  -He ran for 30 min, 4 fps average, on battery, and then I plug the sector, crash after 30 seconds!

  Someone has an idea?

  THX

  Hmmm I have a few ideas.

  First of all, you should check if the laptop cooling modules are free of dust and debris.
  This prevents air circulation and cause of high temperature.
  In addition, make sure that there is enough free space around the laptop.

  Second idea; Use the Toshiba display driver. This driver supports protection of the GPU overheating. Use of that other drivers could lead to high temperature.

• Satellite P300 - poor sound quality using the Dynadock

  I have a laptop Satellite P300, Vista and a * Dynadock VBI * port replicator.
  Except for the audio part of the dynadock works very well.
  I can edit on 2 screens.

  However, the sound is horrible. You can hear only fragments distorted healthy eating and a white noise.
  It takes the dynadock software, because the sound on the laptop is OK and if I connect speakers (Logitech) directly to the laptop, there is no distortion.

  I already downloaded the latest drivers from Toshiba, removed the old software and reinstalled with the new drivers.
  Technical support from Toshiba didn't have an answer.

  One of do you?

  Cordially Frac

  Perhaps there is a ground loop?

  If you remove the power supply of the laptop so its just running on battery, still doing?

• Satellite P300: no sound via HDMI on HDTV

  Hi all

  I get video but no sound when I connect my laptop to my Toshiba HD TV.
  I looked at the settings, but they seem to be ok.

  Any help would be great.

  You must follow these steps if you connect a HD TV to the laptop:

  1. fix a TV to the laptop via HDMI, while both units are in a * "power" off * State.
  2. turn on your TV first, then the laptop.
  3. laptop should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.
  4 launch Sound (start (Windows logo)-> Control Panel-> hardware and sound-> Sound)
  5. on the playback tab, select "Peripheral digital output (S/PDIF)" and click on "Set as default"
  6. click on 'Apply' then 'OK' to close his
  7. the sounds played on the l should now also be heard on the TV (keys Fn + ESC or the volume dial can be used to cut the sound to the computer)

  _Please Note: _
  1. peripheral digital output (S/PDIF) installation default through Volume mixer does not output digital audio via HDMI.
  2 HD DVD-video can only be displayed on the LCD of the computer bulletin board or on a television connected to the output of HDMI port. HD DVD Video cannot be displayed on televisions connected to the S-Video port or an external display connected to the RGB connector.

  Hope this helps

• No sound when connected to headphones or external speakers

  on my laptop dell, a lot of times that I can't get sound on the computer speakers, but when I connect it to external speakers or headphones, I sometimes sounds and most of the time not.

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  It will be useful.

• X 301 has no sound when connected to the port replicator

  Hello

  We have a x 301 with a port replicator 45 k model 2777-cto 1610.

  We first had the problem with the blue screen and not SA of lenovo or IBM might help. I found the solution here.

  No, I have a new problem. When the port replicator is connected, there is no sound on the computer? Once the port replicator is unplugged, the sound works well?

  Any ideas or advice will be appreciated.

  Eugene

  When you connect to the rep of the port, the audio should be routed to the audio port on the default port rep, not your system. There should be a setting via icon taskbar for rep port driver that returns the audio to make of her.

• Satellite P300 back recognize not connected camcorder

  Hello

  I have a camconrder samsung VP-D361 I try to connect to my Satellite P300-150 using a 1394 cable which is in the i.link on the P300 and the DV out on the camcorder but the laptop is not recognizing the presence of the camcorder.

  I downloaded all the drivers of vista from the Samsung website, but still no joy.

  Can anyone help?

  Thank you

  Carl

  The Firewire device works correctly in Device Manager?

  Try a BIOS update.

• Pavilion 27xw & Envy 15 laptop: how to keep sound when connected to the laptop

  Have a laptop 15.6-inch Envy running on Windows 10 and rose just a monitor 27 xw Pavilion, they are connected by a HDMI cable included with monitor
  
  If there is sound broadcast when I connect the HDMI cable it continues to broadcast through the speakers on the laptop, but if it stops then it don't re - start not to broadcast while connected.  If I disconnect the monitor then the sounds spread through the laptop.

  How to work around this problem?

  Jimmy, welcome to the forum.

  You must connect the monitor to the laptop and go to control panel / sound.  You must make sure that the speakers to the monitor are set by default.  If you do not use the monitor all the time, you may need to do this every time you connect it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.