BDP-S350: problems AFTER firmware update

Similar Questions

• WRT54G v4 unusable web interface after firmware update

  I tried to upgrade (actually downgrade) my WRT54G v4 firmware 4.30.11 to 4.21.1. When the progress bar reaches the mark to halfway, I got the message saying that the upgrade was successful. However, now the web interface is so messed up that it is unusable. It's a sign that something went wrong.

  Power, WLAN, Ethernet 1, and Internet lights are all green solid, which should be a good sign. After the upgrade, the web interface says "WRT54G 4.21.1', which is the firmware messed up I am downloading. Browsers, then restart my computer, I have confirmed that it is a router problem, not a problem of the browser cache. I also tried to do a hard reset by pressing the reset for 30 seconds button, unplug the router while holding down the button of reset for 30 seconds and then plug the router while holding down the button of reset for another 30 seconds. This has not fixed anything.

  I encountered a similar problem after an update of the firmware several years ago and the fix to upgrade the firmware using TFTP. This time, however, the TFTP utility could not download the firmware. Using a hack that I found on the internet, I have re - download the 4.21.1 firmware, but the web interface was always messed up. I then downloaded the 4.30.13 firmware. The web interface is still messed up, but then he said "WRT54GL 4.30.13. I then went to the firmware I wanted, WRT54G 4.21.1. The web interface is still screwed up, but said «WRT54G 4.21.1»

  Anyone know how to solve the problem? Yet once, it took place immediately after a firmware update, the web interface is unusable, is not a problem of the browser cache and tried a hard reset.

  Thanks in advance if anyone can help.

  My router model is WRT54G v4. The v4 WRT54G and the WRT54GL are generally considered to be the same device with different model numbers. According to the article of Wikipedia WRT54G, "the WRT54GL is technically a reissue of the version 4 WRT54G."

  I used the firmware 4.30.X for years without problems. However, I decided to switch to the 'right' firmware for my router and something went wrong during the upgrade.

  I solved the problem. I basically just dropped the Linksys firmware and uploaded the DD open source-WRT firmware mini instead. Now everything works fine.

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

• Toshiba 47M7463DG no clouds do not service after firmware update

  Hi all
  I have a problem with my Toshiba 47L7463DG. Services (accessible from the Home button) Cloud stopped working after the recent firmware upgraded. Is there something I can do to return to the previous version of firmware or solve this problem?

  Details:
  Toshiba 2014-051
  May 21, 2015
  Version of the 8.1.97.09.01.1 software
  MBoot Version 00813201
  Shipout G

  Thanks in advance.
  hysten

  After each update of the firmware, reset the TV.
  If you don't, I recommend you perform this procedure...

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• SOLVED: Slow wireless internet passthrough after firmware update

  If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

  I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

  Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

  EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

  Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

  I tried this... still slow passthough wireless speed.

  The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

  I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

  I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

  Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

  UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

  However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

  BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

  And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

  http://www.Speedtest.NET/my-result/4078979293 (laptop)
  http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
  http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

  but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

  But now everything works (at least for now).

  P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

• Sansa Fuze - insufficient volume after firmware update

  After the latest firmware update to its maximum volume looks like a whisper. And the configuration of the System Volume option disappeared! Thought that this setting is set to Normal and should change at the top. But the Volume option no longer exists. I use the same set of headphones. Any ideas? Can I go back to the previous firmware? or should I get another MP3 player? Whenever I update the firmware, I have all sorts of problems! All the presets radio disappear as well! But the problem of volume is the most boring... Thank you all in advance.

  Why throw the baby out with the bath water?  Let build .31 on the device and set your locale.  Choose reset to factory settings, choose in North America and your preferred language.  For Europe, you will need to do is choose "rest" for your steps of FM frequencies.

  Note: You can leave the current version of the firmware installed on the device (build current est.31 ou.33 according to the revision of your device).  Once you select 'Yes' for the mask to reset factory settings, the unit will ask you your desired area.  For the EMEA region, do not forget to go to settings > Options Radio > region and select Europe for the stages of EU frequeqncy.

  I just wanted you to save a lot of hassle!  Your volume option will be available again.

  With regard to the volume, please use good judgment when you listen to your music.  Keep the volume at a reasonable level, because your audience in the long term is much more valuable than a little loud music.  If the device is for the kids, well, as a dad, I know how they are.  Perhaps the limited volume can be useful for once.  You can blame on the EU regulations.

  Bob

• problem with firmware update

  Hello! I got my new clip (8 GB) today and I'm totally happy about it. Everything seems to work fine, the only problem is to update a new firmware. I already searched the forums, but has not seen a similar problem. However, I apologize if this is a silly question, but I'm a newbie-mp3player.

  I have the file on my PC and unzipped, but I can't copy or drag and drop in the root directory of the item. Somehow there is no option to paste it into the root directory. I mean, normally in the menu (in windows) you can select the "Paste" option, but in the root directory, this option is disabled. In the (music) files, I can copy and paste my music without any problem files. I use Windows XP and copy the files manually. I'm doing something wrong? Thanks in advance.

  OK here is your work around.

  Unplug the unit.  Go to settings > USB Mode > Select MSC

  Connect the device to the computer.

  Place the file of the firmware on the root.

  Unplug, it will update.

  In addition, you can update your computer to WMP11.

  After the update, you can change your USB return mode to Auto, MTP or MSC (if you want to access the DRM such as Rhapsody or Overdrive, Netlibrary content, select MTP mode).

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• Speed drop after Firmware update WRT54G2 wireless

  I have a WRT54G2 V1, which began to do a lot of loss of wireless signal, the wired computers are always connected to the net, completely wired computers lose the connection. I decided to try an update of firmware for 1.0.04)is Build 5. and the flow has fallen by 2 members! The wired computers have the same speed of connection as before. I feel is one of the parameters of connection in advance, don't know how tweek. I already went through all the different voltages without success.

  Help!

  So all settings are the same after the update of the Firmware but I went a head and did a reset and all, still half speed re-admitted. It fixed by a new round of power. Also since updated the firmware and reset have not had problems with the router stopping broadcasting either.

• Misprints LaserJet 500 M551 after firmware update

  I recently updated the firmware on the M551 dn 500 laserjet printer.  I installed the update of the firmware successfully, but I keep is printed with characters on the pages 'trash '.  He randomally prints this way and is not consistent.  I don't have that happen after the upgrade.

  I updated the firmware twice in an attempt to erase mistakes without result.

  I did the format clean and complete part and I still get the same errors that occur.

  I tried the upgrade to the current pcl6 driver as well.

  I use windows xp and older windows programs.  This happens in the office software and software autodesk as well.

  I am ready to return to the previous update of the firmware if possible.  I had problems with this firmware update so (printer refuses to print after a period of time), but I'm ready to come back just so that I can keep the waste of paper.

  I've attached an example of printed copies.

  Hi vbrown,

  I don't know what worm pcl6. you use, but try to drive perhaps PS

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• 32TL933 - in places of Toshiba Youtube app not working after firmware update

  I started having a problem since the latest firmware update on my 32TL933.

  Everything worked fine until the latest firmware update.
  Since then, when I connect to Toshiba Places, everything works well except Youtube.
  When I try to access Youtube, it shows the Youtube Logo and stuck on it...

  I would appreciate if someone tell me how can I solve this problem. YouTube are the only thing that I used in places of Toshiba, and now, I can't, it's frustrating cause I have this TV since August!

  Have you tried remove the Youtube app, and then add it again?
  Try this!

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.