BDP S5100 wireless

Similar Questions

• Why the Home Menu will not display when setting up my new BDP S5100?

  I'm trying to get a new BDP-S5100 connected to my tv (a 4-year-old Panasonic plasma HDTV).  The TV can read it is connected to a Sony Blu - Ray device, but will Dim while the player says 'Home'  Pressing 'Home' on the remote control DVD displays nothing.  The remote control seems to work very well for turning on and off and will load and play a disc but no image on the screen.

  The cable seems fine.  After several versions of "turn it on again", including disconnect them the HDMI cable and power sources in orders different, still no go.  We just reconnected the older Blu - Ray player and it works fine.

  Any ideas?

  Hi rxl001!

  Please, try the troubleshooting steps I provided above.

  Furthermore, what is the model number of the Blu - ray player.  Click on this link for additional information on how to find the model number.

• SONY BDP S5100 - time out - USA - connection began to arrive a week or two

  I have the Sony BDP-S5100 for more than a year or two.

  It allows to work very well with Youtube, Netflix & Amazon instant - BUT, BUT, but for the last week or so it has been very bad. It takes forever to get in YouTube and Amazon & it falls dead giving connection message has expired... Server request too long or cannot validate or something like that. Sometimes even he says does not correctly set the network up & asked me to set up the network. I go ahead and it says network is fine!

  I try again and end up in the trash even...

  I use a wired connection & I have 50 Mbps connection. Every thing flies on wi fi but s5100 will not work.

  From time to time, it works very well also...

  Help, please...

  Hi, MNDM and dremg!

  You can try the steps on this link if you are can't get the Blu - ray disc player to communicate with the internet.

  If my post answered your question, please mark it as "accept as a Solution.

• TV can not see blu - ray Sony BDP-S5100 player connected by hdmi

  How can I get my LG TV to recognize my drive blu - ray Sony BDP-S5100, connected by a hdmi cable high speed.  Television can see my fine decoder, but cannot see the BDP-S5100, showing instead a "NO SIGNAL" message.

  I spent the HDMI cables, HDMI, and always the cable box ports is recognized but not Blu - ray player.

  Twice the Sony Blu - ray player has managed to get his screen on the TV for a few seconds and then back to 'NO SIGNAL'.

  Tried the STOP button - on the player! -for a little more than 10 seconds.  Nothing.  Everything off, then back up again.  No difference.  Because the Blu - ray player is not appear on the screen, I can't change any settings in this topic.

  Help?  I need clarification.

  Thank you

  Derrick

  You can consult this article for troubleshooting steps.

• Audio settings on Sony BDP-S5100

  I just bought this Sony BDP-S5100 and I can't seem to get the audio settings to preform properly. OK, I have 3 blu - ray discs. #1 plays ok, #2, no noise and #3 play, but a narrator with the voice actors?

  I changed the setting auto for PCM and I got to have the sound of disc 2, but #3 still has the same problem?

  Who am I screwing up... or is it maybe the drive itself?

  I have a HDMI to my TV and my sound bar digital cable and ethernet to netflix. They work very well.

  Thanks in advance for anyone to help.

  Pat

  Hello

  Thank you. Go ahead with your comments, the PCM is the conventional method for audio conversion analog to digital audio. Audio PCM engraved on the disc is a digital camera 2 channels, a stereo audio track and together your Blu - ray to PCM player's outputs signals PCM from the DIGITAL OUT (COAXIAL) / HDMI OUT jack in your output such as your Soundbar devices and your TV.

  If my post answered your question, please mark it as "accept as a Solution.

• Cannot connect to mlb.tv with sony BDP-S5100

  Hi guys,.

  Simply, this has started to happen Friday, May 9, 2014 (it worked fine for months until now).  When I select MLB.tv to the homepage. He tries to connect but all is see on my screen is a circle of white dots that keeps circling away forever.  I can't stop it and I can't yet go home from there.  Literally, I have to unplug my OTP unit to get out of this State.  I noticed the connection to SEN did the same thing.  He's going to try forever.

  Netflix works great also.  I checked the settings of my network and internet several times and they are all good.

  I use unlock us since I live in canada, but that has worked well for several months...

  Also, my Samsung blue Player connects to MLB.tv on my account very well, so this isn't my account with mlb or something like that.  That would use we unlock so my account should be good.

  This seems to be a matter of sony.  Help, please

  Me again... I thought that to put an update to other users.

  Good news.  I got it to work...

  (1) I unplugged the unit for 2 minutes

  (2) I then did a reset to factory of all attributes.  Make sure you do all, not only the network settings.  I believe that this issue has something to do with another parameter.

  (3) I have set up the network again.

  (4) I returned and selected the application of mlb and he asked me for my login again information.

  (5) then it worked fine

  It took about 5 minutes.

• Reading random/random - server(BDP-S5100) to a DLNA

  I've seen a lot of posts about random/random playback function, but nothing seems to indicate that this function can be added through a firmware update. It is even possible to add this feature via firmware or we are out of luck because it does not support HW?

  Unfortunately, we have no access to information about the features that can be added in future updates. However, you can still visit our Esupport here site to check the benefits of your Blu - ray player software was last updated.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/win-4k

• Failed to connect to Server Provisioning OTP-S5100

  Netflix and other internet applications worked fine on my BDP-S5100 player this month... but when I tried to connect last night, I received a message "a network error occurred." When I checked the system information, I got the dreaded "Provisioning Server Connection Status: failed" message.

  Software version: M15. R.0179

  Device ID: B0:00:02:48:C6:F6

  LINK connection status: successful

  Provisioning Server Connection Status: failed

  ESN: SONY013BDBKL000595Z91Z8JZXY0YKDH

  Netwrok connection status shows that I am connected through my Wi - Fi network.

  I poured on the forums and none of the proposed solutions to this problem have helped (reset the player to the factory setting, disconnected the drive, etc.). I only managed to destroy the list of compatible services internet. It does not connect even to check if there is an update of the firmware ("Connection status cannot be confirmed. Unable to communicate with the server. Please try again later. »). Also, I restarted the modem and the wireless router, nothing helps.

  Funny, it is... I have this same exact player in my room and that you connect very well to the content of the internet (Netflix, etc.).

  Any help would be appreciated.

  Hello

  I see that your firmware is not updated.  Please update M15. R.0197, you can follow the instructions on the tab drivers & software http://esupport.sony.com/US/p/model-home.pl?mdl=BDPS5100 of eSupport site.

  Many times you can not broadcast specific content without going through the most recent firmware.

  Thank you

• How did you configure the OTP-S5100 to ignore a NET connection?

  We bought the Blu - ray Sony BDP-S5100 player for playing discs - do not connect to Netflix, or any other service online. Looked in the manual and configuration settings I can't find a way to say to ignore - and stop trying to connect to-in home wireless LAN. This adds unnecessary items to the MAIN menu, it slows down the cycle ON / OFF, and, worse, the machine insists on leaving the word 'NET' on the screen, rather than numbers of meter by the game disc. The only way to clear it is to return the HOME page, and then press PLAY again once.

  Is it possible to configure this machine to ignore the NET?

  Thank you.

  dlampel

  Thanks, SamT, for your response. The reason why I did not "Accept [ed this] as a Solution" is that the options you mentioned after the restart were not there, in particular,

  "8 perform an EASY INSTALL and select DO NOT ALLOW INTERNET CONNECTION (in step 4)."

  There was no menu selection everywhere to say he cannot do not Internet connection. However, I performed steps 1 to 7 and then made a point to avoid the Net menu selections. Now, it seems is not to search for the connection and all mentions of him flies by without pause. So, it's better than before.

  Thank you.

  Dave

• OTP-S5100 05133 error code

  Lately my BDP-S5100 has been giving me the error code 05133.   Has anyone else had this issue or know a fix?

  Thank you

  Roy Morejon

  Hello

  I find it very strange! I checked your manual which is where these codes usually reside, but there is no mention of the code 05133.

  Can you tell me exactly what you're doing when this error? That is, you play a blu-ray/DVD or maybe the Internet streaming content?

  In addition, when the code something else occur? That is, the unit stops to play?

  Please be as descriptive as possible.

  Thank you

  EDIT:

  I googled just your error code and it seems that you are not alone with this problem, many others talking about this on the web.

  I found these tips posted by an owner on the site from Amazon of all places, might be interesting to try. Please report back if it works.

  * Press the HOME button on the remote control while the unit is on.
  * Press the arrow TO the LEFT until you select the CONFIGURATION icon.
  * Press the ARROW KEY down until you find the option SETTINGS of the SCREEN.
  * Press enter (button setting on the directional circle with arrows).
  * Turn OFF the following options: output BD - ROM, DVD - ROM 24 p output, output 24 p HDMI Deep Color, press ENTER for each change.
  * Under the menu setup, press the ARROW down and select the AUDIO SETTINGS, press ENTER.
  * Select the option of MIXING Audio BD setting and set OFF option, press ENTER.

• Can I play FLAC with OTP-S5100?

  I intend to buy a new Blu - Ray player in the coming weeks. Sony BDP-S5100 is my choice. One thing I need to know and it's important for me, I can play formats FLAC with this Blu - Ray player? Read in a magazine that the format of this Jack in charge of player FLAC, but no information on FLAC in the Specification section of player on Sony sites. Help, please.

  Hi purakrisna!

  Please click on page 39-40 manual to check the list of playable music files. For further assistance, we recommend you visit our global Sony Web site for more information, contact the Sony Support Center in your region.

  If my post answered your question, please mark it as "accept as a Solution.

• Not play disc Blu - ray 3D OTP-S5100, stuck on the screen indicating the needs a 3D player.

  I just bought a Blu - ray BDP-S5100 3D player.  I have Panasonic 3D plasma TV.  When I tried to play a Blu - ray 3D disc, a blue screen telling me, in several languages, the drive requires a 3D player came and it never happened.  The player plays a normal Blu - ray disc very well.  I have all the other drives 3D or 3D drive (this is my first entry in Blu - ray and 3D), so I can't test to see if the problem is with the drive or disc.  Anyone seen this before?  Is there something I can do to get the drive to read, or is it a fatal error?  Thank you!

  I just realized what is the problem.  My Blu - ray player is passing through my receiver and then goes to my TV.  I guess that prevents the appropriate signal to spend, so the 3D player does not recognize or cannot connect properly to the 3D TV.  I just plugged the S5100 directly to my TV and the 3D disk plays very well.  I used a digital audio coaxial cable the S5100 in my tuner so now I surround again.

• YouTube "unsupported file Type"?

  I have the Sony BDP-S5100. It works very well for a few years, but yesterday all the apps disappeared from the home screen. I don't know how I got their back, but when they returned, suddenly every video in the application YouTube YouTube says "No file Type supported."

  It's strange because he has been working well for a long time and the application interface works fine as well. Anyone know what that is changed or a fix?

  Thank you

  Hello Electricman,

  Greetings and thanks for sharing your experience with us.  We would like to recommend to try to reset your device back to settings by default in following the underneath, by doing so, it will have to set the network connection and log back with your credentials on the applications used, also make sure that the unit is the latest version of the firmware available HERE:

  • Press the HOME button on the remote control while the unit is on.
  • Press the LEFT arrow until you select the CONFIGURATION icon.
  • Press the DOWN ARROW until you find the option called reset.
  • Press ENTER (button setting on the directional circle with arrows).
  • Select FACTORY RESET of FACTORY SETTINGS press ENTER.
  • Press the DOWN ARROW until you find all THEsettings, press ENTER.
  • Once you are back to the reset menu to select INITIALIZE of PERSONAL INFORMATION, press ENTER and choose START.
  • Turn off your Blu - ray player for 1 minute and turn it back on.
  • Complete the Initial installation process including the connection to the network.

  Follow these steps to update the list:

  Select the VIDEO icon via the HOME menu.
  Press the OPTIONS button.
  Accept the agreement if requested.
  Select the UPDATED LIST. (if it does not show press the arrow key down and emphasise the last option available under the VIDEO icon and then press the OPTION button)

  Once the applications are displayed once more, please try DNS settings manually through the network configuration as follows to improve network connectivity:

  To enter the primary DNS 8.8.8.8 and 8.8.4.4 secondary as suggested following the following steps:

  • Under the menu host press the LEFT ARROW until you select the SETUP
  • Select INTERNET SETTINGS, press ENTER.
  • Select built-in wireless, press ENTER.
  • Select NEW CONNECTION RECORD, press ENTER. (if applicable)
  • Selects the MANUAL RECORDING, press ENTER.
  • Make sure she has the SSID (name of your network) press the ARROW TO THE RIGHT to CONTINUE.
  • Press ARROW TO THE RIGHT to SKIP encryption type (WEP, WPA, etc.) as it should be already an option is selected.
  • Press the ARROW TO THE RIGHT toSKIP password entry.
  • Select MANUAL or CUSTOM, press ENTER.
  • Select NO for IPV6 to installation, press ENTER (if applicable)
  • Select MANUAL or CUSTOM for configureIPV4 , press ENTER.
  • Select AUTOMATIC for the IP address, press the ARROW TO THE RIGHT to CONTINUE.
  • Select SPECIFY for DNS settings, press ENTER.
  • Enter 8.8.8 primary DNS and secondary 8.8.4.4. Press ENTER.
  • Press the ARROW TO THE RIGHT to CONTINUE.
  • Select NO for proxy, ARROW TO THE RIGHT to CONTINUE.
  • Press the ARROW TO THE RIGHT to CONTINUE and select STORE AND CONNECT.
  • Set up your accounts according to the used applications, including your Amazon credentials.

  If my post answered your question, please mark it as "accept as a Solution.

• netflix icon is not avalbele

  Dear Sir

  yesterday I talk to an expert: -.

  15:20 linking...
  15:20 connected. A technical support representative will be with you shortly.
  15:20 session of support put in place with Derek.
  15:20 Derek:
  Hello. Welcome to the Sony Online support. My name is Derek. You will allow me a few moments to review your concern.
  15:20 customer:
  Hi Derek
  15:21 customer:
  my name is Mommy
  15:21 Derek:
  I understand that there is no icon on the blu ray disc player netflix app. Is this correct?
  15:21 customer:
  and I bought a blue ray bdp s5100
  15:21 customer:
  Yes
  15:22 customer:
  right
  15:22 Derek:
  Have you checked under video option in the menu?
  15:22 customer:
  Yes there is no icon Net flix
  15:23 Derek:
  Very well.
  15:23 Derek:
  Your player is now connected to the internet?
  Customer 15:24:
  Yes
  Customer 15:24:
  WIFI
  Customer 15:24:
  WIRELESS INTERNET
  15:24 Derek:
  Please follow the instructions that I will provide.
  15:24 Derek:
  Press the remote control button.
  Customer 15:24:
  YES
  15:25 Derek:
  Select Setup.
  15:25 customer:
  OKY
  15:25 Derek:
  Under settings, select Reset.
  15:25 customer:
  YES
  15:25 Derek:
  Select initialize personal information.
  Customer 15:26:
  YES
  15:26 Derek:
  Now press home button and select 'network' that is located next to video option.
  Customer 15:27:
  YES
  15:28 Derek:
  Select Refresh Web content.
  15:28 customer:
  YES
  15:29 Derek:
  Now, check if the netflix icon is there under video.

  IT WAS THE HAPPY BETWEEN THE EXPERT AND THE RESULT IS 0

  AND AS I did NOTICE IN YOUR WEB SITE WHO... > 21 October 2013

  Hi magdy59!

  You can follow this link to get the procedure so one or more of the Internet video stations are missing.

  You help us, please provide more information. Are you not internet video icons at all or is it just the Netflix missing?

• Menu line "Media Remote Device Registration" away to the M15 version. R.163 under "network settings."

  When I scroll under "NetworkSettings" I can't find the menu line: "Media Remote Device Registration.

  I use a BDP-S5100 and can play music, videos, etc. from my wireless Z30 or PC by using the RMT-B119A remote console.  When I try to do the same thing using the apps: "Media Remote" or "TV Sideview" on my Z30, I can't add my Blue-ray player because I was not able to record due to the "missing menu line" (?).

  When I check the line: "Inscrit remote devices", it shows: "there are no registered devices.

  Any ideas? Do I need to have a Sony television connected to the OTP to make this line of menu "appear"?

  I tried to reset my OTP and started setting up again but no luck.

  Using Miracast to play videos, music and photos worked great in dynamic mode, but I couldn't establish a stationary Miracast that would broadcast to tell You-tube movies. Is there something in the Protocol of Sony Miracast missing (?). If I try the same configuration on a Viewsonic WPG - 370 everything works OK.

  Any ideas here too?

  Otherwise, the BDP-S5100 is awesome.

  Yes, you must connect the BDP-S5100 to TV before installing SideView TV App. Please click here for more information.

  If my post answered your question, please mark it as "accept as a Solution.