Reading random/random - server(BDP-S5100) to a DLNA

Similar Questions

• Achievement reading random/random with a custom (blank) microSD (SlotRadio Player)

  I apologize in advance for asking a noob for my first post question. I read in some other nets and impossible to find exactly what I was looking for and thought I'd post on the device-specific Board.

  I bought an ativa 2 GB microSD card to load some of my own music (would have bought a SanDisk card, but none in the store) and used the adapter to connect it to my computer and drag and drop files directly on the map.

  I created 5 test records that on the display of the SlotRadio Player, appear as 7 playlists on a preloaded SlotRadio card (1 000 - song). I can navigate through folders to test using the buttons to the left and to the right of the display screen, and the names of file/songs appear in the same format as the playlists/songs of preloaded maps.

  However, then the SlotRadio Player seems to play maps preloaded in random shuffle (my preference as well) and the curls after having exhausted all the titles on any given playlist (to keep the atmosphere going), the player will not play my card microSD personally responsible in this way. He will play in the existing order and go to the following folder on the card after have played all titles in the current folder.

  Y at - it no coding I can add to an existing file again on the map to read random/random initiate and loops?

  The firmware on my SlotRadio Player is 01.01.13A (not the most common, but I'm not sure if this has anything to do with what I described above).

  I use WMP to organize my music and first tried to sync to the microSD with this software, but opted for drag - move after realizing the SlotRadio Player treats each file (artist, Album, etc.) as a "reading list". (The same barrier to reading random/random, I ran using a cheapy 1 GB mp3 player in the past.)

  Thanks in advance for taking the time to check this.

  KC

  what you see is by design of the player. In reality, there is no shuffle mode this player. When you use slotradio cards it may seem to play in a random order, but it actually isn't. There are 3 different playlists ordained to each playlist on the map the songs don't play in the same order. Unfortunately, you will not be able to play your personal music randomly as the player it self does not support random playback.

• Why the Home Menu will not display when setting up my new BDP S5100?

  I'm trying to get a new BDP-S5100 connected to my tv (a 4-year-old Panasonic plasma HDTV).  The TV can read it is connected to a Sony Blu - Ray device, but will Dim while the player says 'Home'  Pressing 'Home' on the remote control DVD displays nothing.  The remote control seems to work very well for turning on and off and will load and play a disc but no image on the screen.

  The cable seems fine.  After several versions of "turn it on again", including disconnect them the HDMI cable and power sources in orders different, still no go.  We just reconnected the older Blu - Ray player and it works fine.

  Any ideas?

  Hi rxl001!

  Please, try the troubleshooting steps I provided above.

  Furthermore, what is the model number of the Blu - ray player.  Click on this link for additional information on how to find the model number.

• SONY BDP S5100 - time out - USA - connection began to arrive a week or two

  I have the Sony BDP-S5100 for more than a year or two.

  It allows to work very well with Youtube, Netflix & Amazon instant - BUT, BUT, but for the last week or so it has been very bad. It takes forever to get in YouTube and Amazon & it falls dead giving connection message has expired... Server request too long or cannot validate or something like that. Sometimes even he says does not correctly set the network up & asked me to set up the network. I go ahead and it says network is fine!

  I try again and end up in the trash even...

  I use a wired connection & I have 50 Mbps connection. Every thing flies on wi fi but s5100 will not work.

  From time to time, it works very well also...

  Help, please...

  Hi, MNDM and dremg!

  You can try the steps on this link if you are can't get the Blu - ray disc player to communicate with the internet.

  If my post answered your question, please mark it as "accept as a Solution.

• Adobe Reader DC Windows Server 2012.

  Hello

  I try to find something about it, but I found nothing. Can someone tell me about the Adobe Reader DC Windows Server 2012 license in business? It s free for commercial use on server or not?

  Hi dfsafasfsafsafsa,

  Adobe Reader is a free software. You don't need to buy the license for the same thing.

  Choose Windows Server 2012 as your operating system, you can simply download the CD player from the below mentioned link:

  Adobe Acrobat Reader DC install for all versions

  Kind regards

  Ana Maria

• TV can not see blu - ray Sony BDP-S5100 player connected by hdmi

  How can I get my LG TV to recognize my drive blu - ray Sony BDP-S5100, connected by a hdmi cable high speed.  Television can see my fine decoder, but cannot see the BDP-S5100, showing instead a "NO SIGNAL" message.

  I spent the HDMI cables, HDMI, and always the cable box ports is recognized but not Blu - ray player.

  Twice the Sony Blu - ray player has managed to get his screen on the TV for a few seconds and then back to 'NO SIGNAL'.

  Tried the STOP button - on the player! -for a little more than 10 seconds.  Nothing.  Everything off, then back up again.  No difference.  Because the Blu - ray player is not appear on the screen, I can't change any settings in this topic.

  Help?  I need clarification.

  Thank you

  Derrick

  You can consult this article for troubleshooting steps.

• Audio settings on Sony BDP-S5100

  I just bought this Sony BDP-S5100 and I can't seem to get the audio settings to preform properly. OK, I have 3 blu - ray discs. #1 plays ok, #2, no noise and #3 play, but a narrator with the voice actors?

  I changed the setting auto for PCM and I got to have the sound of disc 2, but #3 still has the same problem?

  Who am I screwing up... or is it maybe the drive itself?

  I have a HDMI to my TV and my sound bar digital cable and ethernet to netflix. They work very well.

  Thanks in advance for anyone to help.

  Pat

  Hello

  Thank you. Go ahead with your comments, the PCM is the conventional method for audio conversion analog to digital audio. Audio PCM engraved on the disc is a digital camera 2 channels, a stereo audio track and together your Blu - ray to PCM player's outputs signals PCM from the DIGITAL OUT (COAXIAL) / HDMI OUT jack in your output such as your Soundbar devices and your TV.

  If my post answered your question, please mark it as "accept as a Solution.

• Reading random problem iTunes 12.5.1

  I updated iTunes to 12.5.1 version. The first day it worked fine, but now all the albums are played randomly. If I use the view artists, Albums or songs, if I click on Play, iTunes does not play the album in the correct order. I tried to restart iTunes and even my computer that runs on Windows 10 with the latest updates, but the problem persists. How can I solve the problem?

  I tried to reinstall iTunes, but the problem persists. So I have to use another drive, if I want to listen to an album in the correct order.

• Reading random movieclips by chronology without repeating

  I have eight video clips on my main timeline. The idea is to play the first clip, once a button is clicked, go to a random frame 2-8 on the timeline and play the movielip on this framework, the GET referred to frame 1 to start the process again. I have this figured out, but I don't want frames repeating until they have been played. Inside the first movieclip is a button with the following actionscript code attached. Everything works perfectly EXCEPT my frames repeated before they all played. I don't see in my script where I have gone wrong. Help, please!

  var nums:Array = new Array();

  1,2,3,4...

  for (var i: uint = 1; i < 7; i ++) {}

  Nums.push (i);

  }

  for the table of brewing

  function shuffle(a:Array) {}

  var p:int;

  var t: *;

  var ivar:int;

  for (ivar =. Length-1; Ivar > = 0; Ivar-) {}

  p = Math.Floor ((Ivar+1) * Math.Random ());

  t = a [ivar];

  a [ivar] = a [p];

  a [p] = t;

  }

  }

  mix table

  Shuffle (NUMS);

  set up controls for the button

  var: County: uint = 0;

  boxButton.addEventListener (MouseEvent.CLICK, plyRndmMv);

  function plyRndmMv(evt:MouseEvent):void {}

  MovieClip (root) .gotoAndStop (nums [count] + 2);

  Count ++;

  if(Count == 8) {}

  Shuffle (NUMS);

  Count = 0;

  }

  }

  If your button is reset, you must re - run its code of the listener.  That is to say, remove boxButton.addEventListener (MouseEvent.CLICK, plyRndmMv); the if(!alreadyExecuted) block:

  var alreadyExecuted:Boolean;

  boxButton.addEventListener (MouseEvent.CLICK, plyRndmMv);

  {if(!alreadyExecuted)}

  alreadyExecuted = true;

  var nums:Array = new Array();

  1,2,3,4...

  for (var i: int = 359; I)<=365;>

  Nums.push (i);

  }

  for the table of brewing

  function shuffle(a:Array) {}

  var p:int;

  var t: *;

  var ivar:int;

  for (ivar =. Length-1; Ivar > = 0; Ivar-) {}

  p = Math.Floor ((Ivar+1) * Math.Random ());

  t = a [ivar];

  a [ivar] = a [p];

  a [p] = t;

  }

  }

  mix table

  Shuffle (NUMS);

  trace (NUMS);

  set up controls for the button

  var: County: uint = 0;

  function plyRndmMv(evt:MouseEvent):void {}

  MovieClip (root) .gotoAndStop (nums [count]);

  trace (nums [Count]);

  Count ++;

  if(Count == 7) {}

  Shuffle (NUMS);

  Count = 0;

  }

  }

  }

• Reading random movieClips onClick, then return to the start screen

  Hi I am very new to actionScript 3. My project starts with who travel a film clip (startPage), then onClick, moviecip startPage disappears and a random movieclip(sc01-sc03) loads and plays. Once each random movieclip is playing, I want to remove from the scene and reload the home page. I have the random part using a table, but I can't figure out how to remove the movieClip random sc once it is loaded. I tried using removeChild, but Flash is not recognizing that I added and the movieclips sc in the Park. Help!

  My current code below:

  package

  {

  import flash.display.MovieClip;

  import flash.events.MouseEvent;

  import flash.events.Event;

  SerializableAttribute public class Main extends MovieClip

  {

  var startPage:StartPage;

  var sc01:Sc01;

  var sc02:Sc02;

  var sc03:Sc03;

  private var _scenario:Array;

  public void Main()

  {

  startPage = new StartPage();

  SC01 = new Sc01();

  SC02 = new Sc02();

  Sc03 = new Sc03();

  _scenario = new Array();

  MC.addChild (startPage);

  Add scenes to the table

  _scenario [0] = sc01.

  _scenario [1] = sc02;

  _scenario [2] = sc03;

  Add event listeners

  startPage.boxButton.addEventListener (MouseEvent.CLICK, onBoxButtonClick);

  startPage.addFrameScript (startPage.totalFrames - 1, stopPageFunc);

  SC01.addEventListener (Event.ENTER_FRAME, everyFrame01);

  SC02.addEventListener (Event.ENTER_FRAME, everyFrame02);

  Sc03.addEventListener (Event.ENTER_FRAME, everyFrame03);

  stop at the end of the chronology of startPage

  function stopPageFunc()

  {

  startPage.stop ();

  }

  function onBoxButtonClick(event:MouseEvent):void

  {

  MC.removeChild (startPage);

  MC.addChild (_scenario [Math.floor (Math.random () * _scenario.length)]);

  }

  function everyFrame01 (): void

  {

  If (sc01.currentFrame is 50)

  {

  MC.removeChild (sc01);

  MC.addChild (startPage);

  startPage.gotoAndPlay (1);

  }

  on the other

  {sc01.play ();

  }

  }

  function everyFrame02 (): void

  {

  If (sc02.currentFrame is 50)

  {

  MC.removeChild (sc02);

  MC.addChild (startPage);

  startPage.gotoAndPlay (1);

  }

  on the other

  {sc02.play ();

  }

  }

  function everyFrame03 (): void

  {

  If (sc03.currentFrame is 50)

  {

  MC.removeChild (sc03);

  MC.addChild (startPage);

  startPage.gotoAndPlay (1);

  }

  on the other

  {sc03.play ();

  }

  }

  go to the homepage when script

  }

  }

  }

  replace line 44 by:

  MC.removeChild (MovieClip (e.currentTarget));

• Captivate 5: reading random Questions in a Quiz

  Hi all

  I know it is possible to mix the answers to a quiz, but is it possible to mix the issues? I would like to mix my questions so that users are presented with quiz questions in a random order.

  Thank you!

  Brittany

  Next, you will have the chance would be to use the Question Pools and have many questions of variation.  Change the order of questions is not really effective.  Change the real issues is a much better way to test participant knowledge.

• Can messages be marked as read outomatically when they were read on another server like Yahoo or Gmail?

  I have several accounts e-mail with different servers. I don't have access to all except at home. If I have access to my work Gmail account or another remote site, I would prefer not to have to open/mark as read, etc., at home where I use Thunderbird.
  Any suggestions?
  Thank you.

  Security gate

  If you have a Pop email account, then it will look at the Inbox on the server, and download whatever it either has not been downloaded and mark as new unread mail. This is because the e-mail Pop of TB account has no knowledge of any marking/labelling, etc. that has occurred on the server. It downloads only tuberculosis because it's a pop e-mail account

  If you have an IMAP email account, then TB remotely viewing records and emails on the server. You see records because you have subscribed to see. When you choose to display an e-mail in a subscribed folder, contents are downloaded in a temporary cache to facilitate faster access to emails in that folder, but the cache is deleted when you exit. If these emails are not stored on your computer.

  You can also synchronize folders in order to keep a local copy on your computer, but these files will be updated / synchronized when you make changes, so that TB files and server folders are the same. While a copy is stored on your computer all the changes you make via webmail or TB will be reflected in both. Thus, while synchronizing Gets a local copy on your computer may not be invoked as a backup file is constantly updated with the server.

  So it depends on what type of e-mail account you use. If you have an IMAP e-mail account, you should see the changes on the server.

• How read .cvs web server?

  Hello

  I assumed it would be easy, but I'm not having any luck here... I would create a VI to read each of the .cvs file located on a local web server (see imagesfor more details).  Any suggections?

  Thank you

  Pete

  PJackson wrote:

  I can stick this same path in the Open box of excel and the data loads perfectly...

  This is because Excel does some fancy way, analysis, sees the URL and load the file on the web rather than from the local disk. It is in no way standard behavior (although perhaps, it will be in a few years). Until then, you can not treat a URL - an address for a file on a remote web server - as a local file. RavensFan suggestion might work if you set the sharing of files on the remote computer, but then you do file sharing, do not download from the web. To download a file on the web, use the HTTP screw or a Datasocket Read, which is probably the easiest option here. For Datasocket Read, provide the URL (http://10...) as well as the connection to the wire one string empty type. You will have the entire file as a string on the output data, which you can subscribe to the channel of spreadsheet in table for a table.

• Microsoft Reader - 500 Internal Server Error

  I tried to activate Microsoft Reader on my PC for a week, but get a "500 - internal server error, there is a problem with the resource you are looking for, and it cannot be displayed." I followed all the FAQ and activation guides troubleshooting, uninstalled and re-installed, tried a different PC, etc. without success. I can only assume that this is a problem at the end of Microsoft. When is this corrected?

  Interestingly, I tried to activate MS Reader on my HD2 tonight in preperation to give to my girlfriend (I'm getting a feeling tomorrow, she has several seldomly but I hope she'll get into the Kindle as the HD2 duel boots into Android).

  My laptop is running W7 Pro with IE9, I'm a domain administrator.

  Race through the activation that I generated an error 500 on the server each time.

  With IE9 "Run As" administrator, it works.

  I hope this helps.

• Tool for reading the PCOIP server logs?

  I was wondering if there are viewers of the newspaper or the tools to read the location a little easier pcoip server logs.

  c:\programdata\vmware\vdm\logs

  This is a nice tool, aside from that you can use the tools of teradici

  Tools for deployment of PCoIP Protocol (15134-1082)

  Keep this article handy if you try ti solve the problems of disconnection

  http://KB.VMware.com/kb/2012101