beep 5 times I hv hp compaq dc7100 computer to desktop pc...

Similar Questions

• Upgrade my memory HP Compaq dc7100 Ultra slim Desktop PC

  
  

  sbmusk,

  Even if you're a little confused, and I feel a bit surly, here are your answers.

  How to install memory and constraints. See pages 2-11 thru 2-13.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00298116/c00298116.PDF

  Specifications for installation: (three modules of 1 GB max to the unit) for installation):

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00247168 & lang = to & CC = US & TaskID = & prodSeriesId = 430118 & prodTypeId = 12454

  Type of memory you can install is: 400 MHz, CL = 3.0, memory non - ECC DIMM DDR - SDRAM PC3200

  All the technical features are listed here:

  http://www.4AllMemory.com/memory/Compaq-HP-Business-Desktop-dc7100-USD/

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• Only lights. Will beep 3 times.

  In early 2011 MacBook Pro 13 2.4 ghz i5 320 HARD drive, updated 16 gb ra.

  This a few days ago. Randomly turn off and restart. Became the apple logo and a loading bar get to halfway and then die again, then I have tried all the resets without result. Re and formatted hard drive installed the latest os X.

  IT worked, then it turned off and would not turn on again except to make 3 beeps and LED flashes with her. So I booked into the Genius Bar and it took immediately, he had worked as if by magic. Could not find any problems, so I'm stumped.

  Updated RAM anyway and works very well and today all of a sudden he turned to and now won't load even the apple logo screen just stay empty and will beep 3 times continuously.

  Where do you have the RAM from and what brand please?

• How can I find a graphics driver for my hp compaq dc7100 sff

  My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  Hello:

  Please follow these instructions and see if the video driver installed.

  Your integrated graphics (GMA 900) is not capable of Windows 7.

  I can send you the link for a pilot who has to work a lot better, but you never have Aero.

  Here is the link to the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-47264-1 & mode = 4 & IDX = 0 & prodTypeId = 12454 & prodSeriesId = 3352967

  You need run the package. It will extract the drivers and it will then give you an error operating system not supported.

  Close the error window and then manually install the driver by clicking on the video controller in Device Manager. Click the driver tab click on update driver. Select the "Browse my computer for the software method.

  Navigate to: C:\SWSetup\sp34749, make sure that the include subfolders is selected and the driver should install.

  It should be much better than what you have now.

  Paul

• HP Compaq DC7100 Doesnt boot

  There are no beebs, looks like he would go normally, but not photo on the screen...

  Can someone help me?

  HP COMPAQ DC7100 CMT:
  4 GB memory
  Windows 7
  400 GB hdd s.
  Case Antec sonata I
  overclocked to 3.5 ghZ

  Now she starts.

• Z420 beeps 6 times when starting

  Hello

  I use HP z420, who have no onboard graphics chip.

  I use a graph inserted in the slot PCIe card.

  I have just bios setting to disable all PCIe slots stupidly.

  When I reboot z420, it beeps 6 times, once per second.

  According to the manual, it says error pre video graphics.

  Is it because I have disable PCIe slots, and how can I activate them?

  Thank you!

  Hello:

  You can also ask your question on the HP Business Support Forum, z section of workstations.

  http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.UwoMqOmPK9I

  If it was me, I stop, unplug all connected to the PC (keyboard, monitor, mouse, etc.) and reset the CMOS.

  There must be a small button yellow clear cmos on the motherboard somewhere.

  Press in and hold the button for 30 seconds and then everything back together.

• How can I correct "processor not valid update firmware" I have a compaq dc7100 cmt

  My m/c is a HP Compaq dc7100 CMT (DX438AV).

  I replaced the processor 2.8 with a P4 HT 3.4 ghz 1 M/800 SL7PY, when starting, it gives the message "missing or not valid processor microcode update.

  My motherboard is ch h 0968. My Bios is...  Version: 786 1 v01.05

  I looked at the form of the Commission and I think that it supports this chip, can anyone help with this problem

  Thank you...

  Thanks for the help, I installed this firmware and also updated the bios to lasest 2.12 (I think)

  and the problem is solved

• HP Compaq dc7100 USDT: Audio does not not on HP dc7100 usdt

  HP Compaq dc7100 USDT

  P/N PN290AA #ABU

  dc7100U/P4-530/80hnd / 512 G/4 UK

  Windows 7 Professional 32-bit with Service Pack 1

  SoundMAX Integrated Digital Audio

  5.12.1.4070 driver version dated 15/04/2004

  Hello

  I'm fighting to get the audi is working on my dc7100 usdt. Device Manager says it's working properly but the internal speakers no sound no matter what I do.

  Force an update of the driver indicates that the most recent driver is already installed. I tried to uninstall (including uninstalling the driver software) and get Windows to recognize the hardware and install the correct driver, but he came back with the same driver (see above).

  I checked the audio device by default and it is correctly display as SoundMAX Integrated Digital Audio but still no sound from the speakers. However, his fate regularly with headphones when they are plugged into the sockets before hadphone/mic.

  Pointers would be greatly appreciated.

  George

  Hi, George:

  Have you tried the Vista driver?  Install manually if auto installation does not work.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=428535&swItemId=vc_53028_1&swEnvOid=2096#tab1

• the power of the computer beeps three times and no start

  When I turn power on the cumputer will beep three times and that's it. No start up but the fan and the drive continue to operate.

  You should consult the manual or the manufacturer's website if you do not have a manual. The codes differ from a constructor. This means generally that something fundamental has broken.

  Here are some possibilities - http://www.5starsupport.com/info/beep_codes.htm

• Inspiron N5110 will beep 5 times on start up

  My Dell Inspiron N5110 beeps 5 times for 5 times now when I start my computer. I did a system scan that everything happened except he said to launch the memory test window.

  Done that and he said as he went. Can someone explain these beeps? I did a search of code and were not able to fing anything with 5 beeps 5 times in a row.

  Any help would be appreciated. Thank you

  5 beeps usually mean cmos battery failure. Replace the button battery

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

• Problem with audio driver on Compaq dc7100 Base model Convertible Minitowers

  The reinstallation of Windows XP SP3 and install all drivers (chipset - restart - audio - restart) I always get the error message "could not start the device (error 10)" for the Audio device in the device (with the yellow exclamation point icon) Manager.

  I downloaded all the drivers directly from the homepage of product HP (from here).

  All other devices work correctly. Only problem is with the audio device.

  Any help?

  Info on my PC:

  Motherboard: Hewlett-Packard HP Compaq dc7100 CMT (DX438AV)

  Integrated audio controller: Intel 82801FB ICH6 - AC 97 Audio Controller [B-1]

  OS: Windows XP SP3

  Unfortunately I have foud that it is probably a HARDWARE problem. The audio device is sometimes work properly sometimes, I get the error message describes (without changing system settings/drivers).

  Thanks for your help and your advice!

  I'll buy a new PCI sound card. I hope, it is possible to disable the integrated audio device...

• My dell beeps 7 times whatever that means?

  Hello

  When I try and turn on my dell insiprion nothing happens then it beeps 7 times, whatever that means and how can I solve this problem?

  Hi united30,

  Welcome to the Dell Community forum.

  As ejn63 said correctly, we need to know the model of system that would help us determine what medium beeps 7. If the computer is a laptop, it could be a problem with the processor.

  Please post with the computer model number.  I am looking for on this issue and get back to you with results.

  If you have active warranty, you can contact me directly by clicking on my username, add me as your friend and send me the number of service system and phone # with address.

• Is it possible to remote access to files on airport time capsule without a great second computer mac at home?

  Hello!

  I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.

  Only Mac... Mac you will use for remote access to files on the Time Capsule... is necessary.

  Set up and use Back to My Mac

• WiFi adapter for hp compaq 15 computer pc laptop 15-s006tu - windows 7 (32 bit)

  WiFi adapter for hp compaq 15 computer pc laptop 15-s006tu - windows 7 (32 bit)

  Hello:

  I see that something is wrong here.

  This link works...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_131223_1 & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken