Upgrade my memory HP Compaq dc7100 Ultra slim Desktop PC

Similar Questions

• HP Compaq 7600 Ultra Slim: Upgrade memory and video on a HP Compaq 7600 Ultra Slim

  Hello

  I have two questions that maybe someone could help me with regard to computer HP Compaq 7600 Ultra Slim (Base).

  Quesition 1: motherboard has three locations of memory instead of 4, this means that memory can only be improved to 3 s gig? I am currentlly have three 512 memory chips for altogether 1.5 Gig, but I want to upgrade to the maxi I think it is 4 GB. (I had tried to use gig two chips and 512, 1 but they didn't work because the 1 GB have been 6400's.)

  Question 2: I tried different ways to install a PCI-E video card but I do not see how it fits. The rear panel has a scsi interface in the PCI riser card. I removed the SCSI card, but no matter how I tried, I don't see how to hold the card. Any body is not picture on how it must be inserted?

  Thank you

  Hello:

  Here is the link to the quickspecs for the dc7600.

  http://h18002.www1.HP.com/products/QuickSpecs/archives_Division/12253_div_v1/12253_div.PDF

  See the info to the USDT where the x are applied.

  Maximum memory is 3 x 1 GB (see page 6 and 9).

  Graphic... you can not add a conventional PCI express graphics card.

  See page 11 for graphics only map available.

  The slot that resembles a location PCIe x 16 is for a special HP. planning DVI ADD2 card.

  And even if the quickspecs state that this map is available for the USDT (at page 10) this document of specific information that is not.

  http://isvpatch.external.HP.com/HPPTF2/Drvlib/docs/HPADD2SDVOPCIeDVI-dadapter.PDF

• HP compaq dc7700 ultra slim: Simple PCI communications controller

  Hello

  I will appreciate if someone will help me to find the link to download the driver for my Hp Compaq dc7700 ultra slim 32-bit win7 desktop.

  For PCI CONTROLLER of SC hardware ID:

  PCI\VEN_8086 & DEV_2994 & SUBSYS_2803103C & REV_02
  PCI\VEN_8086 & DEV_2994 & SUBSYS_2803103C
  PCI\VEN_8086 & DEV_2994 & CC_078000
  PCI\VEN_8086 & DEV_2994 & CC_0780

  Thank you.

  You are the very welcome.

  This is why I suggested that you manually install the driver if the automatic installation method does not work.

  Certainly this is the driver you need, and there is no version of Windows 7 from this one.

  I gave this driver to dozens of members of the forum and it worked for them in W7, W8, and W8.1.

  I am also sad to announce that, for some members of the forum for a reason you can that will allow the driver to install and to do this, I don't know why the same driver runs on the same computer for some and not for others.

  Here's a partial copy and paste the contents of the driver installation information file.  As you can see, the hardware ID you posted is supported by this driver.

  ; - Manufacturer and models Sections.

  [Manufacturer]
  % MfgName % = Intel, NTx86.6.0, NTx86.5.2, NTx86.5.1, NTamd64

  [Intel.NTx86.6.0]
  ; DisplayName Section DeviceId
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_2974
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_2984
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_2994
  % HECI_DeviceDesc % = HECI_DDI, PCI VEN_8086 & DEV_29A4

  If you don't know how to manually install a driver, here's how...

  Go to Device Manager and click on the controller Comms Simple IBOS who need pilots.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34743.

  Make sure that the include subfolders is selected and I hope that the driver will be installed.

  If this does not work, then the only other suggestion I can offer is to try the driver directly from Intel.

  https://Downloadcenter.Intel.com/download/11559/AMT-Intel-AMT-Sol-driver-for-965-chipset-based-Intel-Desktop-Boards

  If this does not work either, unfortunately, you will be one of these people where you have to live with this uninstalled device.

  This device has no effect on the functionality of your computer if it is not part of a corporate network where things can be done to manage the remote PC.

  If you use it as a PC at home, except the frustration of not having a 'clean' Device Manager, you will be fine.

• Slim desktop computer Dc7800: DC7800 ultra slim desktop

  Hello I can't find missing drivers "PCI Serial Port" and 'Controller PCI of communication Simple' for my maschine DC7800 ultra slim pic I use Windows 7 (64-bit) enterprise.

  Thanks to advice.

  Hello:

  You need these drivers for devices...

  Serial port:

  https://Downloadcenter.Intel.com/download/13935/AMT-Intel-AMT-Sol-driver-for-3-series-chipset-based-Intel-Desktop-Boards

  Comms Simple PCI:

  https://Downloadcenter.Intel.com/download/19697/Intel-me-management-engine-driver-for-Intel-3-series-chipset-based-desktop-boards

• Compaq DC7900 Ultra Slim: DC7900 Win7 update

  Hello

  We are upgrading some old office for Win7 PC to access all the features of Office 365 and office of 2013.

  I have a DC7900 Ultra thin under XP with Intel Core 2 Duo E8400 processor 3.00 GHz: replace us the HARD drive with a new and larger.

  Do you know if this can work for Win 7?

  Thank you very much

  Luca

  Hello:

  Yes, there is a complete W7 driver for the dc7900 support.

  Some of the production model dc7900 later came with the factory W7.

• HP Compaq dc7800 ultra slim: Hp compaq

  163 time and date not set... The value correct Tim and date using your operating system.
  -What it means and how to fix it?

  Problem solved... I feel like a button
  

• beep 5 times I hv hp compaq dc7100 computer to desktop pc...

  Hi Sir I hv hp compact dc7100 with building in windows 8.1 pro authentic. Beed 5 times near light red. How do I solve this error

  Salman, welcome to the forum.

  Here's a guide to the computer's BIOS beep codes.  Beep codes are at the bottom of the page in the link I have provided.  From what I see, it seems that you have a memory problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ELITE ULTRA SLIM 8200: 611836-001

  I have a barebones Hp 8200 elite ultra slim desktop computer. I bought it without CPU, RAM or hard drive. This processor is compatible with this motherboard. I can't find any records on this motherboard. Everything I could find is a part of the Mozart #611836-001 usdt LGA1155 socket number. Does this mean that no matter what lga1155 processor will work? Thank you

  Hello:

  See the link to the quickspecs below...

  Supported processors are listed in pages 8 & 9.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx%2Fc04168353.PDF

  Make sure you watch only those listed for the USDT.  Those would be the ones with the X on the left.

  The x on the right are for LTS and CMT models.

• HP Compaq DC7100 Doesnt boot

  There are no beebs, looks like he would go normally, but not photo on the screen...

  Can someone help me?

  HP COMPAQ DC7100 CMT:
  4 GB memory
  Windows 7
  400 GB hdd s.
  Case Antec sonata I
  overclocked to 3.5 ghZ

  Now she starts.

• Upgrade of memory issues

  Hello

  I have HP Compaq dx2200 system and two 512 MB DDR2 Synch DRAM PC2-5300 (667 MHz) stiks Non - ECC (1 x 512 MB).

  So, I decide to switch to 2 GB and I bought Kingston PC2-6400. Also, I bought two PC2-6400 1 GB stiks.

  Well, but after I installed the first 2 GB is the system beeps constantly.

  So I try to install two other stiks from 1 GB - the same problems!

  Y at - he of the uncompatibility?

  Any help, you will enjoy!

  Yes, a compatibility issue is exactly the problem you are experiencing. Plug-ins must match the original modules in all respects. They must be of the same manufacturer, same capacity and same type and speed. (Synch DRAM PC2-5300 (667 MHz) Non - ECC).

  Install identical memory modules only if you want to upgrade the memory successfully and without surprises. If you can't find the identical memory modules then buying two modules of 1 GB guaranteed compatible. Remove the original 512 MB modules, put the new guarantee compatible memory modules in its place and its startup in Windows.

  Source modules by searching online I did below

  http://www.memorystock.com/memory/Compaqdx2200.html

  http://www.Elive.co.nz/Kingston-1gb-KTH-XW4300-t8839.php

  http://www.Amazon.com/memory-HP-Compaq-business-desktop-DDR2-5300/DP/B00989B7NS

  http://edge.crucial.com/upgrade/HP-memory/HP+business+desktops/dx2200+series-upgrades.html

• Ultra-Slim 8000 elite: necessary recovery discs

  I need to get a set of recovery discs for an HP 800 ultra-Slim elite. I can't find on the website. Can someone let me know how to get them? Windows 7 pro.

  Hello:

  You need to order recovery for HP business PC and laptop disks by phone.

  If you live in the USA/Canada, call HP at this number to order a set of recovery disks.

  1-800-334-5144

  Have the serial number of the PC handy to give to the customer service rep.

• 8000 elite ultra slim: greater for HP 8000 elite Ultra Slim SATA drive

  I have a HP 8000 Elite Ultra Slim 10 Windows running.  What size SATA HDD I can go to?

  (1 TB, 500 GB, less?)

  Hello:

  Using the drive as boot drive, 2 TB is the maximum for the Elite 8000 series lacks a UEFI BIOS.

  I'm not casual if the USDT allows for additional HDD to be used for storage only.

• How can I find a graphics driver for my hp compaq dc7100 sff

  My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  Hello:

  Please follow these instructions and see if the video driver installed.

  Your integrated graphics (GMA 900) is not capable of Windows 7.

  I can send you the link for a pilot who has to work a lot better, but you never have Aero.

  Here is the link to the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-47264-1 & mode = 4 & IDX = 0 & prodTypeId = 12454 & prodSeriesId = 3352967

  You need run the package. It will extract the drivers and it will then give you an error operating system not supported.

  Close the error window and then manually install the driver by clicking on the video controller in Device Manager. Click the driver tab click on update driver. Select the "Browse my computer for the software method.

  Navigate to: C:\SWSetup\sp34749, make sure that the include subfolders is selected and the driver should install.

  It should be much better than what you have now.

  Paul

• Portege M700 - Ultra Slim Selectbay HDD expansion?

  Hello

  I tried for a while to buy an adapter for my Ultra Slim Selectbay HDD in my M700-139. I can't find a buy in the United Kingdom who said that it is compatible with the M700.

  Does anyone know if it is possible to buy an adapter for this Bay - and if you can, any idea where to buy from?

  Thank you very much!

  Hello

  I found this:
  http://www.shopbot.com.au/pp-Toshiba-slim-SelectBay-HDD-adaptor-pa3408u-2etc-price-93894-3626292.html

  But look, man. all compatible parts and Portege M700 supported parts can be ordered from the ASP in your country.

  Maybe contact the guys then you would ask this adapter.

  Welcome them

• Portege M700 - Ultra Slim Bay

  In the User Guide, in the section of list of equipment control, it says "Ultra Slim Bay weight Saver (is included with some models)". And since I got a case Ultra Slim Bay (which is also included in some models), logically, it would also come with the weight of the day before. Because, when I take off my DVD player to place in the case of the Ultra Slim Bay, there is a gaping hole left in the laptop where the DVD player used to be. It is not sensible that Toshiba did not provide weight saver, it don't...?

  Thanks for your help,

  Joseph

  Post edited by: James

  PS. This message was rejected by the system because it was blasphemous? What is going on? It took me 7 tries until I decided to change my message instead. What is the problem with the system? It was VERY frustrating, and it does not tell you what part he wanted to edit! bad code... Fix it.

  I m not a Portege M700 owner but I think Akuma's right. The dummy DVD Don comes only with models without DVD player, I think.

  If you wish, you can contact an authorized service provider. They can order all the parts of Toshiba.
  Or search you on the homepage Toshiba accessories. Maybe you will find the part number you can search with Google to find online shops they sell this part.

  Good luck!