the power of the computer beeps three times and no start

Similar Questions

• At startup, the computer beeps very - Compaq Presario s # 31316953

  I bought a Compaq Presario s3310 om (2600 + amd athlon with XP Home Edition.) S # 31316953)

  When I start the computer the computer beeps continiously and nothing happens after that. I did some research and would like to confirm that it is a RAM problem. The original Ram has 512 MB of ddr sdram memory. I did a search on the diagnosis Compaq Bios Beep codes and a beep very indicates error memory - reinstall or replace and re test. I'm on the right track?

  Nothing is lost by air, dust off the RAM slots.  Not sure you interpretation of the beep codes are correct.

  Beep codes: http://support.hp.com/us-en/document/bph07107

  What is more troublesome is buying a vintage 2003-04 machine that did not work. In addition, reinstall all the other cards.

  You can also try a system recovery not destructive http://support.hp.com/us-en/document/c00007689

• dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT CANT BE REAL CODE IS

  dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT can NOT BE TRUE

  If it is a new machine call or go to circuit city and get them fixed.  If they sold you the laptop, indicating that it included Windows XP then the onus is on them that provide you a valid COA and the product key.

  John

• I want to cancel my subscription to the month. I have called three times and still it is not cancelled.

  Cancel my membership monthly. email is: [removed] I have called three times and still not received my refund. Please write to me that it was canceled, and I will receive my refund. I shouldn't call THREE times, and now send you an e-mail for this cancellation. Very bad customer service. I will call management then. [deleted] Thank you.

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  This is an open forum, not the Adobe support... You need Adobe support to cancel a subscription

  -Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  -or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Computer gives an error on IPCap.exe two or three times and then shuts down my computer

  Original title : ipcap.exe

  I get an error message on IPCap.exe and it will close. He would make 2 or three times and then shut down my computer.

  Any suggestions?

  Hello

  • What is the exact error message that you receive?
  • What were book them before the problem started?

  You can view these methods:

  Method 1:

  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:
  I also suggest you to verify the issue in the State of clean boot and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Start and then click Run.
  2. Type msconfig and click OK.
     The System Configuration Utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When you are prompted, click on restart to restart the computer.

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• Site ads continue to use the proxy settings and I get the message "Authentication required" time and time again. I have stop advertisements to use my proxy settings?

  I have put my school proxy settings and use them very often. On some Web sites, ads continue to use these proxy settings (probably to show me ads based on my preferences or I don't know), and I get the message "Authentication required" time and time again before the end of the loading page. It's annoying because if I have several tabs open and am currently on another page while loading the website with the ads, I'm brought back to this page to authenticate. Can I get asked 3 times to authenticate while this page loads, and it takes forever to load because of this. I don't want to disable my proxy settings because I use it very often. I tried to uncheck the "Accept cookies from Web sites" and nothing happens, it's always the same. I want these ads to stop going through my proxy settings. How do I do that?

  Hello

  You can try the add-on Adblock Plus . In addition to subscriptions, you can manually add URL patterns or click on an ad to add a filter.

  Support

• Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

  Original title: blocking or scrolling

  Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

  Hello

  1 how long have you been faced with this problem?
  2 don't you make changes on the computer before this problem?
  3 what e-mail client or browser you use?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, viruses or malware scan and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• virus: I struggled with the virus for some time and cannot get rid of them

  I have struggled with the virus for some time and cannot get rid of them. I bought a few programs, but they have also been infected. any suggestions for a really good virus buster.

  Hello

  First of all, an antivirus solution to an already infected system of loading is usually pretty useless. The bug will block all attempts to remove or load what it sees as a threat. Second, without knowing which virus you are affected by, it is difficult to be precise.

  You can take action include:

  (a) work in safe mode, there is much less likely that the virus is able to load and resist actively.

  (b) the safe mode, run utilities malwarebytes.org and AV solution that was installed * before * your infection.

  (c) post is back with a better description of what is on your system to learn more targeted advice.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Y at - it an email address to contact for help me to cancel my subscription? I tried to use the option chat 4 times and my internet keeps dropping out and canceling the cat until I can get the cancelled subscription

  Y at - it an email address to contact for help me to cancel my subscription? I tried to use the option chat 4 times and my internet keeps dropping out and canceling the cat until I can get the cancelled subscription

  You may please check out the link below for instructions on cancellation.

  Cancel your membership creative cloud

  For more information you can contact the Support from Adobe by clicking on the link below.

  Contact the customer service

  Please make sure that you are connected to the right Adobe ID.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Is fallen from MacBook Pro, light flashes three times, won't start

  HHello, fell of my MacBook Pro 2011, about two feet on the ground, there is no external damage.  Front light flashes three times and will not start.  Tried holding button, smc, pram.   Have been reading about the RAM.  Maybe it's in bulk, hope that's it, that is.  Don't have the tools (unibody).  Any ideas, help?  Thank you

  CCan really turn on and off with power button flashing light / stop.  And can hear the click (assuming it's the disc) turn off.

• Yoga: S1 ThinkPad won't start, only the light flashes three times.

  So I just bought a refurbished Thinkpad Yoga and everything was great for a little while. So I decided to stop it and put it aside for a few minutes. After coming back, he now refuses to even POST. I tried each power cycle I could think of, in various combinations and traveled several forums. At the end of the day, I have no functional solution.

  Current situation:

  System responds in any way other that 'i' (in the Thinkpad logo) light flashes three times when the charger is connected, or even when you press the reset button while the charger is plugged. Another illicits nothing any kind of beep, light, or otherwise.

  Any help is greatly appreciated. Thank you and best regards.

  I have the feeling that you had opened the back cover of tinkering with components (whether a change of SSD or the modem 3g / 4g).

  the symptoms you described sounds exactly like a cut cable MB. You can try opening the hood back and on the left side, you will see a wire labeled "MB". tighten, and the computer should fit now.

• CQ57 229YWM: my CQ57 229YWM compaq persario is not turn on no lights, except the battery blinks three times

  My CQ57 229YWM compaq persario is not turn on no lights except her flashing battery three times I did everything I thought about doing but did not work.

  What should I do?

  You mean just for the cable of the wall power brick? You're lucky, those that cost a little money.

• The computer beeps repeatedly when you try to start

  Original title: when I start the computer I spend two long beeps and over__first we're 2 long s, second one is long of 5 sec

  It's a pain

  Check the manual of your computer or web support page - this indicates a hardware failure, but since we cannot say what kind of computer you have has no way for us to interpret it for you.

  "dragon1707" wrote in the new message: * e-mail address is removed from the privacy... *

  It's a pain

• I down loaded firefox 4 three times and it always looks like the old firefox tabs look alike nothing has changed

  I wanted to update for firefox 4, I did four times and everything seems always the same tabs do not differ as he shows. I ' am running windows 7

  1. If you are missing the orange Firefox button, open view > toolbars and uncheck the Menu bar item.

  2 If the tabs are not over the top, right-click on a toolbar, and then select the tabs on top.

  These two things are usually the default settings for Win7 and Vista, but are not for WinXP - perhaps something in your profile a ker-fluey during the update.