Before adding a new TF, remove any TF container 'type here '.

Similar Questions

• PS The CS6 (2012) and the tube to move it to a new Mac. I did a search on the web, but the information was not conclusive. I have to disable my current Mac before installing the new Mac? I still have the CD to install it. Thanks in advance for any help.

  I have PS CS6 (2012) and the wand to move it to a new Mac. I did a search on the web, but the information was not conclusive. I have to disable my current Mac before installing the new Mac? I still have the CD to install it. Thanks in advance for any help.

  You can install and activate up to 2 Macs for your own use. That would leave you with a spare part if something were to happen with your old Mac.

  However if you are going to get rid of, see help > deactivate, then also check the option to remove the serial number power the computer off.

  Then go to your folder CS6 use the Uninstall.app to properly remove Photoshop. Do not drag the folder to the trash.

  You can install fresh on your new Mac from your drive, turn and look for the updates.

  As a note: do not move or copy your old installation of Photoshop to a new Mac.

• Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  You use the Enterprise Dashboard?

  If so

  1. ensure that they use the correct ID type. So if they have been added to the dashboard with Enterprise or federated ID to ensure they do not use the Adobe ID or vice versa.

  2. bring to sign out and sign back in to check their eligibility.

  3. If the problem persists, then try this:

  The opm.db file contains the login user cached information and delete this file is a useful troubleshooting step. Once deleted a fresh file will be automatically created when you start creative cloud and reconnect.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.

• Previous role is removed when adding a new role based on the rule.

  I created a user-defined, domain and based on this attribute, I created a rule.

  It works very well, when the attribute is updated in the table form/USR for a user, the rule kicks in and the role is granted to the user.

  This part works fine, but when the next role is added, the previous is removed.

  for example

  USR table - UDF (User Defined Field) - AD_Group

  Role - rule - role Cust_Group = "AD_Group1".

  RoleB - rule - RoleB Cust_Group = "AD_Group2".

  Anyone know a similar situation?

  Thank you

  Arun

  Looks like you manage the role assignment both having the same value of the UDF. First time when you assign the role of the data rule contains UDF is vale as "ABC" then after update through "BCD" which will trigger the second rule but upset the previously obtained. This is the expected behavior.

  Suggestion: you need to do different UDF for the second rule. and so on.

• Satilite M40X - adding a new processor

  I was wondering how I would go about adding a new processor in my laptop. I've never done anything like this before and I was wondering how I would go to do. Also, I still actually have to buy a new processor so if you have any suggestions, or if there are problems cause I should knowledge about it would be great if you could tell me.

  In your case, I won t exchange the CPU.
  It is not really important because the price of a new processor is high and you get much more performance.
  The BIOS does not always work with the CPU and Toshiba doesn't supports this service.

  I started an article on Exchange CPU/GPU:
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

• Added the new kingston 256 GB ssd to my MBP 13 "2012

  I added a new ssd 256 GB kingstone to my MBP 13 "2012 and it worked fine for a month, today it has frozen and restarted without reason. and there is a folder with a questionmark in the middle of the screen icon. I once git to start again and now it stoped working again. Can any ideas on how I fix this?

  You can contact the manufacturer and see what are the provisions of the warranty.

  Start the recovery partition and run disk utility > first aid.

  If there is no problem, remove the SSD and install it in a closed Chamber.  Plug it into the MBP via USB and see if it will start the MBP.  If so, the internal SATA may have to be replaced.

  Ciao.

• ITA 8.0 and adding a new SNMP alert source

  Hello

  I added a new source of alert SNMP to monitor if a Netware Volume is dismounted.  If I unmount a volume on the server it warns me of this.  Everything is good.  Problem is that it does not have to be what volume.  I have to enter a kind of variables in the "FORMAT STRING" but I don't know what.  I have a SYS and a volume of DATA.

  Netware trap is as follows,

  volAnyDismounted TRAP-TYPE--1.6.1.7.17/1.2.5.7.35
  COMPANY nwalarm-mib
  VARIABLES {}
  serverName,
  trapTime,
  volumeName
  }
  DESCRIPTION "the server removed the indicated volume in»
  response to a DISMOUNT command. »

  --#TYPE "FileSys: flight dismantled."
  --#SUMMARY "%s dismantled on the volume.
  --#SUMMARY "%s server."
  --#ARGUMENTS {2.0}
  --#SEVERITY OF INFORMATION
  --#TIMEINDEX 1
  --#HELP "nwalarm.hlp".
  --#HELPTAG 221
  -#STATE GRADIENT

  : = 221

  Anyone know by reading the above what should I enter in the FORMAT STRING for this tell me what volume disassembled?

  Any help would be appreciated.

  See you soon,.

  Needles

  
  

• Adding a new host to the existing cluster

  Hi all

  The existing cluster has a connected SAN. Should what precaution I look forward to add a new host to the existing cluster? I did research that we should physically disconnect the HBA before adding, I don't know what it is to be honest.

  Any help / idea would be highly appreciated.

  Concerning

  VDZ wrote:

  Thanks a lot, guys

  Please, how can one more thing I change the host name?

  Appreciated all your help

  Kind regards

  Hello

  Once the host is already in the vCenter inventory, you cannot change it, you must disconnect host to vCenter, delete the inventory and add it again using a different name,.

  for example, if you specify IP during the connection wizzard, it seems in vCenter inventory under an IP address, if you want it to be visible as a hostname or a domain FULL, during the wizard name you used its hostname or FULL domain name

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• ReadyNAS 204 - adding 2 new drives

  Hi all

  I have a RN204 (OS v6.4.2) currently with 2 x 3 TB WD red inside. Everything is good, and I have a RAID 1 of 2.72 TB volume - looks as X-RAID also.

  I've now bought another 2 x 3 TB WD red. My questions are the following:

  1. in the event that their add to the volume existing 1 at a time? Adding the 2nd time the Unit completed the resynchronization or whatever after the addition of the 1st disk.

  2. should I turn off the unit before you add the new disks?

  I have still no data on the NAS.

  Please indicate what is my best way...

  Kind regards

  Ian

  Add the drives one at a time with the unit on.

  Wait for the resynchronization to complete for the first disc before adding the second.

• Outlook Express 6 - recently emptied my folder deleted items, but now I can not remove any messages in my Inbox

  For my sins, I always use Outlook Express 6 for my e-mail personal. Recently, I've erased my deleted items folder, but now I can not remove any messages in my Inbox. Any ideas?

  Thank you

  Outlook Express has never reduced the file size of the file folder deleted during the clearance of the output folder. Instead he left a lot of dead space that has not been used for something beyond too much space.

  The good news is that if you simply, locate the Outlook Express mail storage folder and delete the Deleted.dbx file, Outlook Express will recreate a new vacuum the next time it starts up.

  1. Open Outlook Express and access Tools, Options of dialogue,Maintenance tab, click store folder and copy the location. Close Outlook Express.
  2. Click on Start, run or the Windows key + R to rap then paste in the location previously copied and press on . The storage folder should open.
  3. Remove or rename the Deleted.dbx file.
  4. Close the file, and then restart Outlook Express.

  That should solve your problems of deletion. You can also run a Compact on your other files .dbx tabmaintenance Tools, Options dialog box.

• Adding a new computer portable...

  I have a PC with a Linksys router which worked well with my old laptop at home. Now when I try to put in place the new laptop for the wireless netwrok, with that I continue to connect CVCTVLY limited access which means no internet. I entered the WEP password manually and this is what happened. When I tried you use a flash drive to set up the pc to home says there is no software to complete the connection. Niot sure where to go here because it is a software... Any suggestions

  Remove preferred networks of the computer and restart the connection to the network... Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...

  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet... Check if you get an error message.

• upgrade from vista to win7 will remove any virus that I may have

  upgrade from vista to win7 will remove any virus that I may have

  Hello

  do not normally remove you the malware by upgrading

  You must do a clean install

  Try this instead:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Adding a new hard drive on e9180t

  Hi, I have e9180t and I'm considering adding a new hard drive.

  Can my office manage 3 to/6.0 GB/s 64 MB Cache SATA internal hard drive?  I get my full performance out of it?

  I read the possible combinations (http://support.hp.com/us-en/document/c01817977 specification page

  Is there a limit to the capacity of the hard drive?  (up to 2 TB)?

  Can handle a 6.0 GB/s transfer rate?

  I currently have 2 hard drives in the following:

  1 TB - Barracuda (st31000528as) 7200 RPM 32 MB SATA 3.0 GB / s
  500 GB - Maxtor DiamondMax 21 (STM3500630AS) 7200 RPM 16 MB SATA 3.0 GB/s

  If I buy 3 to/6.0 GB/s hard drive and use it as a hard drive, will I use these two hard drives as a secondary hard drives?

  Thank you!

  For those who might be interestd, this is what I found after some digging and calling:

  Since the motherboard that comes with e9180t (ipmtb-tk) is SATA 2, its speed is limited to 3.0 GB/s.   When 6.0 GB/s hard drive is connected, the speed will slow down to 3.0 GB/s.

  You can only use the full 3 TB capabity if your motherboard bios has opportunity to support UEFI interface.  However, most of the motherboards built before 2011 doesn't have this option.  ipmtb-tk is one of them.  However, there is a work around.

  1. go in the bios and check that the interface is set to AHCI (non-RAID).

  2. when the disk partition is loaded, you will be able only to the 2 TB partition.  another partition 750Go seems a separate partition that you cannot change.  Partition the 2 TB the way you want to and install Windows 7 on it.

  3. after that excavation is done, download Seagate Disk Wizard.  Later one of their homepage did not work, however.  You must download this one:

  http://www.seagate.com/staticfiles/support/downloads/discwizard/DiscWizardSetup-14382.en.exe
  

  I don't know why they don't have this default link on their home page when you go to download DiscWizard.

  Once the wizard disk is installed, it will pick up the 750Go that you weren't able to before partition as a new drive and now will allow you to partition.   (Keep the MBR instead of TPG setting, format it to NTFS)

  Once you partition using the tool, Viola!  a new drive with 750 GB of space has been added as a new drive.

• History report page is printed before printing each new document? cc = us

  How can I stop my HP Officejet 6700 Premium printing a page history report before printing each new document, using Windows 7 and using Microsoft Word? When I open a document and print it, it prints a story, including: name of file. Directory; Model; Title; Topic; Key words; Comments; Creation Date; Number of change; Last record last record by. Total editing; Last impression on; As last impression...

  Everything worked perfectly for a year, then I had to reinstall the printer because I deleted it by mistake. I cary it with me when I travel to meetings, and didn't have my installation disc, so I had to download the installation software. I haven't changed all settings for Word, but it seems that the report is generated from Word.

  Help will be appreciated. I can't find any other subject like mine to see a solution already presented.

  Hello

  The report has indeed generated by Word and not the pritner driver.

  As you did not specify your version of MS Office, I have included the steps for Word 2010, I think that the same should also apply for Word 2007:

  1. From within Word, click on the file menu, and then select Options.
  2. Select the view in the left pane.
  3. The chapters of the Printing Options, uncheck the box next to print document properties.
  4. Click OK and try printing again.

  If you can't find the specific option, please specify your exact version of Microsoft Wiord.

  Shlomi

• Class not found exception after adding a new image in the folder resources.

  The app works perfectly well on the Simulator and the device. After adding a new set of images, he began to show in every race, on the Simulator and the device, a class not found exception.

  When you try to delete some images to find the cause, I get different classes not found when executing. Compilation and packaging the application generate warning or error. They even get signed. Some of the classes are not exception I get:

  Java.lang.StringBuilder

  NET. RIM. Device.API.UI.UIApplication

  I'm guessing this has something to do with the size of the total image, since the size of each range image from 100 KB to 300 KB, and we talk about only 25 or 30 images in total. Adding image outside of the 'res' folder does not generate the error, but the image is not added to the final files.

  In addition, this application is not large, but when compiling and packaging of the app, it generates and signs 125 cod files. Is this normal?

  I use Eclipse 3.6 (Helios) and BB SDK 5.0.0.25 won win 7

  Any help will be appreciated. Thank you.

  Have you seen this?

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-maximum-size-of-a-BlackBerry-smart...

  I would recommend that you download these kinds of resources and put them on the SD card if you take a storage capacity that users will want to keep available for email and others.