Beginner help you (Press)

Similar Questions

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• I can't delete an e-mail in the Outbox, I right click and you press DELETE nothing helps

  I can't delete an e-mail in the Outbox, I right click and you press DELETE nothing helps

  What should I do?

  If she is trying to send, you must check first to work offline and then it should delete.

• Windows help keeps popping up when you press the happy.

  Hi, I am currently using an HP XT's spectrum that runs on Windows 8. Two days previously, when I press SHIFT C, the capital C is not at all.  Therefore, I press Caps Lock shift but this triggers a Windows Help is displayed.  This can be very irritating, especially when I'm typing a document. Anyone would be able to tell me how to activate the 'Shift C' keys, as well as to turn off the help pop-up windows when you press the CAPS LOCK key.?  Thank you very much for your help!

  Hello Lai,

  Thanks for posting your query in Microsoft Community Forum.

  If it works well before? If YES, you did important equipment or modifications to the software on the computer before this problem?

  The issue could rest with the material if it is a keyboard mapping problem. Then, I recommend you to connect an external keyboard with the ultrabook and check. If the external keyboard works fine, then you may need to contact the manufacturer of your system (hp) for the same problem.

  If you get the same problem with the external keyboard, the issue may rest with the keyboard or corrupt drivers.

  In this case, I suggest you to update the drivers for the chipset of your ultrabook. You can view the following link to do so:

  Spectrum of HP XT Pro Ultrabook

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why.

  I recently created a form to complete for the app e-business of the company. When you press the button submit, he only sent to our Inbox to project and not sent to the e-mail provided in the URL. Can someone help us to program the key to help explain why / tell us step by step what we should do?

  OK, I re-read your question. It's actually expected behavior. The user must manually send the email.

  If you want it to be a silent process, then you must either install a script on the local computer of the user who will do this, or use any email but something as a service web to which you directly submit the form data.

• A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  Select the text and use the Warp tool to give a fake italic.

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• VI, who controls the action only when you press the button

  I have two stepper motors that control a cart on each axis.  My goal is to make a program that helps others in my lab to easily assign a direction and the distance they want the cart to move and then run the command.  I want them to be able to update the direction and the distance and then press a GO button which will be sent the signal to the basket.  To do this, use a VISA resource.  I have the MOST done program.  The question that I am running is my button does not work as I want.  It is not always save the push or he sends the signal several times on the drive.  I am attaching the 2 screws that are implementing the mechanics of my button in two ways.  Any help as to what I can to one or the other VI so he could make the order only once while leaving the operator make additional entry changes constantly and the start of the VI.  Thank you.

  You should use the structure of the event so good for you on one of these examples to try to use it.  Tied, is implementation that actually works.  You press once on the button and acts on it once.  Pressing stop or close the window works as well.

  EDIT: If you have some free time you must follow some training and try to find examples on the structure of the event.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -LabVEW databases

  -DAQ Application tutorials

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Thunderbird will synchronize automatically unsubscribed all Gmail mail when you press the button "a".

  I will sync not all messages in Gmail as it is simply a duplicate of all my other files.

  However, if you accidentally hit the 'a' on the keyboard while in the folder view, Thunderbird automatically opens the folder all the messages in Gmail and begins the download/sync folder. Mine is so boring about 20 GB.

  I have to close TB, open it, and then quickly unsubscribe to record all messages in Gmail, then shut down, remove the msf file and then I can return to TB for her to work normally.

  Is there a solution to this? How can I stop the key 'a' to remove case opening?

  Thanks for the help

  Paul

  You check when you press 'a' and this is interpreted as moving all messages in gmail.

  I suggest that you look at the KeyConfig add-in that allows you to specify (and turn off!) keyboard shortcuts.

  http://KB.mozillazine.org/Keyconfig_extension:_Thunderbird

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Tecra A4 does not light when you press the power button

  When I press the power on button it turns green for 4/5 seconds then turns off.
  "I do all the tests the support on the page:
  
  * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

  * Connect the adapter to the computer.

  * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

  * Plug the power adapter into a different plug.

  * The battery, ensure that there are enough energy to start the computer.

  * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

  * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

  * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

  * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
  In vain:]

  You know? THX

  Hello

  There must be a hardware malfunction.
  You have tested a lot and nothing has worked
  I think there is not much to do, you all tired and I guess the authorized service provider could help you

  If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

• Re: Keyboard typing letter and numbers when you press letter keys

  Hello

  My keyboard is typing letters and numbers when you press letter keys. I did im sure on the correct mode. You know FN - 11 / FN - 10. I have a Satellite L300D-11V running Windows vista Home premium. Can anyone help?

  I also tried holding down both shift keys for 20 seconds and two shift, and the ALT for 20 sec, but no change. Sticky keys are not on and the language of the keyboard is set to the United Kingdom.

  Any help would be great,

  Thank you.

  Hello

  You can connect the keyboard external usb to check?

• CAPSLOCK ALWAYS ON... OFF CAPSLOCK HAS SO THAT WHEN YOU PRESS ON... THEN TURNS ON AUTOMATICALLY

  Hello

  CAPSLOCK ALWAYS ON... OFF CAPSLOCK HAS SO THAT WHEN YOU PRESS ON... THEN TURNS ON AUTOMATICALLY

  Hi david,
  I deleted the account and created a new... Problem solved. Thank you for your help...

• Crash when you press the [...]

  I got various random crashes when you press the button [...] in the various 9.0.1, CVI function panels but I have not found a model so far.

  1. open Control Panel function for SetCtrlAttribute
  2. for "Attribute of control", press the button [...] and select the item of «Format"under «Format and precision...» "found under"control settings.
  3. press the button [...] to 'value of the attribute.  For me, he won every time CVI.

  Thanks in advance for any help!  If all goes well, there is a quick fix that I find this feature very useful.

  Hello

  It is a known issue with CVI 9.0.1.  This link should fix the problem for you.  Let me know if it does not work.

  NickB

  National Instruments