{beginning} how to remove the inner part of a path?

Similar Questions

• How to remove the upper part of a key on a Satellite C870-C196?

  Hello

  I would like to know if it is possible to remove the upper part of a key on a TOSHIBA Satellite C870 C196 to clean underneath?

  I have a button that does not work properly.

  How to go without anything break?

  Is there a specific tutorial for this projection keyboard how?

  Thanks to you all.

  Kind regards

  Tutorial so that it does not exist, but I can say, is that you can remove the plastic cap. It may be problematic to implement.
  On older machines, it was quite easy, but on the new laptops equipped with flat keys, it is not so easy. As far as I know that each CAP is fixed with 4 pretty small hat holders must be fixed properly. to put all the 4 instead is not so easy.

  I don't know what to say. You can try it, but on the other hand, I don't want to encourage that because you can damage something and in the end, you need to replace the entire keyboard.

  If there is a serious problem, you can request the service of Toshiba for advice and ask for help.

• How to remove the unwanted parts of drawing black and white line

  I scanned in a flower art simple black and white lines.  I would like to remove some of the petals in Photoshop.  How can I do?

  Thank you

  I would like to remove the petals from the background.

  1 method: with the select magic wand the white bg, select-> invert the selection and create a layer mask.

  

  The layer mask is a monochrome picture, transparent black, white is opaque and anything in between is more or less transparent.

  You can now select the layer mask, use the brush and black paint, where you want to have something white, removed where you want to have something added. It is non-destructive and works very well on your photo.

  

  You can use shift click to 'draw' the small lines to attach to the top. According to the clarification, it will take more or less time. As I said are non-destructive.

  Second method: you use the pen to draw the lines around your flower vectors. With little exercise, you'll very quickly and you can always adjust the curvature of your curve, by pulling on the handles of the curve. Here you can see how it works: drawing with the pen in Photoshop tools .

  When done with the pen tool, you can add the vector line as a vector mask. You can even refine your mask after finishing. I suggest, since a mask of course work at a refined mask.

  The flower should not be on a layer, a background layer. Basemap layers have no transparency. The two methods are non-destructive, so you can return to the original image or parts of it, whenever you want.

• How to remove the extension .part downloads.

  When you download a file, Firefox will add the .part. file extension is possible to not do this?

  Firefox will automatically as .part, remove more once the download is complete. There is no way to avoid adding it.

• How to remove the upper part of the American flag to the right of the screen

  Hello

  I clicked on something that presents an American flag at the top right at the top of screen bar. I don't need a symbol that tells me that I use American English. How can I remove it?

  Thank you

  Garrett

  My son showed me. Click on the flag and then uncheck show it.

• a date column, with timestamp... How to remove the timestamp

  Hello
  
  I have a table name WRESTLING, with one of its fieldnamed DATE, using the DATE data type.
  The date format incudes timestamp, can someone help me how to remove the timestamp part.
  I want only the part of date only. I tried this:
  
  Update DATE is to_char(date,'DD-MON-YYYY') set of CATCH;.
  but the result of all the date inside the table always have timestamp.
  
  can I use this:
  Update DATE is to_date(date,'DD-MON-YYYY') set of CATCH;.
  and still the same result.
  
  Can anyone advice on this? pls.
  Thank you

  user9353110 wrote:
  Thank you very much.. If this is the case, we can remove the timestamp when creating view for this table?

  No, you can never remove the component "hour" of a DATE.

  If you do not want to display a date in time (display purposes only!), use TO_CHAR to "transform" the DATE to a string with the format mask

  SQL> alter session set nls_date_format = 'dd-mm-yyyy hh24:mi'
    2  /
  
  Session altered.
  
  SQL> select sysdate
    2    from dual
    3  /
  
  SYSDATE
  ----------------
  17-03-2010 09:28
  
  SQL> select to_char (sysdate, 'dd-Mon-yyyy')
    2    from dual
    3  /
  
  TO_CHAR(SYSDATE,'
  -----------------
  17-Mar-2010
  
  SQL> select to_char (sysdate, 'yyyy-MON-dd')
    2    from dual
    3  /
  
  TO_CHAR(SYSDATE,'
  -----------------
  2010-MAR-17
  
  SQL> 
  

  NOTE: the example of last two are not DATEs! They are STRING

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .

• How to remove hidden links (how to remove the links, ONLY the hidden parts of the document)

  in Acrobat XI-> after deletion "text hidden" using the tool 'Remove hidden information'-> links still remain in the hidden passage / cropped -> so the real question is - HOW TO REMOVE THE LINKS HIDDEN in a PDF. An approach may be to remove 'links, Actions and Javascripts' tool 'Remove' hidden information - BUT it removes links TO the WHOLE OF the DOCUMENT - "how to remove the links, ONLY the hidden parts of the document"

  Hidden text is the collection of glyphs in the PDF page using the text rendering mode 3 (no terms, no fill).

  The links set up in connection with this hidden text are not 'hidden' (this isn't how it works with annotations PDF link - see ISO 32000-1: 2008).

  Any link annotation placed in a PDF file are the same as any other annotation link (with the exception, of course, of whatever Action the link happens to).

  Thus, no special sauce for the links that were placed in conjunction with now deleted "no hidden text.

  In the context of what you wrote, maybe it's you select - Ctrl + click the link annotations of interest and press the delete key.

  Be well...

• How can we reomove inner part of the polygon 2 polygons merged

  Hello
  
  When im with 2 polygons to form a simple polygon, I can see there are a few small lines and resulted in points within the polygon.
  
  So my question is, is there space functions that can help remove the inner lines. I mean, I want only the ploygon limits resulted.
  
  I searched a lot and did not find any bad thing to that.
  
  Please let me know if anyone of you knows about it.
  
  Kind regards
  Kiran kristelle

  If all the extraneous elements are entirely contained within the polygon, then you can use sdo_util.extract to get the 1st element, which in this case will be the outer limit of the polygon.

• Satellite M35 Pro - how to remove the screen bezel?

  Hey everybody,

  Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

  Can you please help me with this!

  Thanks in advance!

  Hello

  Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
  You could damage other parts that you know

  You're stuck on the LCD mask?
  As far as I know the LCD mask is covered by two screws that are hidden under the joints.
  You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
  Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

  But note; Be careful, don't use any force!

• Portege M400 - how to remove the condensation of water?

  I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

  so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

  the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

  but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

  hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

  * so, how can I remove the condensation of water? *

  * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

  Hello olekike

  Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
  View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

  I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

• any ideas on how to remove the software malicious zebrouss?

  any ideas on how to remove the software malicious zebrouss?

  This thing I replaces my setting of search in safari - can get rid of it - don't know who got it

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Save all data first.

  Some of the most common types of adware can be removed by following the instructions from Apple. But before you follow these instructions, you can try an automatic removal.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted, not all. There is no such thing as the automatic removal of all possible malware, either by OS X third party software. That's why you can't rely on software to protect you.

  If the malware is deleted in your case, you will still need to make changes to the way you use your computer to protect you from new attacks. Ask if you need advice.

  If the malware is not automatically deleted, and you cannot remove yourself by following the instructions from Apple, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

• 2015 envy 17 t-n100 I76700HQ: how to remove the back cover of a 17 t-n100 envy?

  Hello, I upgrade my Ram and hard drive 16 GB of Ram and 1 TB ssd drive. I looked everywhere, but for the life of me I can't find any info on how to remove the back cover. There are utube videos that show older versions, but they are completely different. You can provide any help would be greatly appreciated.

  Thank you

  Hello

  Did you know that it's a job for parts of authorized service provider ? If you wish, for the RAM, try it please:

  1. turn off the computer. If you don't know if the computer is off or in hibernation, turn on the computer and then stop it through the operating system.
  2. remove power from the computer by disconnecting the power cord from the computer.
  3. disconnect all external devices from the computer.
  4. remove the battery (see battery on page 27).
  5. remove the optical drive (see optical drive on page 28).
  6. remove the bottom cover (see low cover on page 31).

  as mentioned on page #38 of the following record:

  http://h10032.www1.HP.com/CTG/manual/c04696907.PDF

  DIY will void the warranty.

  Good luck.

• Remove the dark part of the Image

  Hello

  I just started to work with NI VISION. I have attached an image with this post.

  Can someone tell me how I can remove the dark part in the picture? I read on the histogram, which gives a total number of pixels at each level of gray.

  But I don't know how I can use this information to improve the quality of the image, or in my case how can I use it to balance the values of pixels surrounded with the rest of the image.

  I hope I explained my problem properly.

  I found the solution to the problem. I used "Manipulation of pixels.

  If anyone has any better ideas then please share.

• How to remove the laptop battery?

  Hello!

  My question seems a little odd, isn't it? I bought a HP Pavilion dv7-1285DX two months ago. I don't know how to remove the battery from the laptop! Sounds crazy, I use HP laptop for 5 years, but I could not understand how the hell should I take the battery from this new guy! Could someone please tell me what to do. If you know how to do it please show it with a photo or something, or set up a website or video or something.
  Thank you and all comments are appreciated.

  Siar

  Message edited by Siar on 13/10/2009 02:26

  Hello

  Follow these steps: -.

  BE VERY CAREFUL!

  Before you begin any Setup or uninstall procedure:

  1 shut down the computer. If you do not know if the

  computer is turned off or in hibernation, turn on the computer.

  and then stop it through the operating system.

  2. disconnect all the external devices connected to the computer.

  3. disconnect the power cord.

  4. remove the battery by following these steps:

  a. turn the computer upside down with the front

  towards you.

  b. drag and hold the 1 battery release latch to the left.

  (Disengage the front edge of the battery of)

  the computer).

  c. lift the front edge of the battery 2 and bring her back.

  d. remove the battery.

   

  Reverse the above procedure to install the battery.