Behavior of the screen

Similar Questions

• Accelerometer turns off when the screen is off

  When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.

  An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.

  On Android, a partial wake lock is enough to keep the accelerometer running.

  I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.

  Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software

  The fix will appear in MR 10.2, 10.2.1 aka.

  I recently submitted a fix for the problem.

• Erratic touchscreen behavior windows 8.1 on sony SVF15A18CXB - bubbles and the places at the top of the screen

  Bubbles & places appears in the upper part of the screen after a certain time of use of the laptop (sony SVF15A18CXB).  The rest of the content changes size and moves all around. There is no response out of control, and the only way to stop it is to turn off the computer. I already tried without success, the recovery process. Help, please

  Hello Lau,

  Thanks for the reply.

  According to the description, it seems a problem due to corrupted display drivers, or due to a third-party application.

  I suggest to follow the steps in the link below and check if it helps you.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/45264/c/65, 66/p/48903,49902,74254,90785 /.

  Let us know the status of the issue.

• app store works but no pages open to the screen

  I can't select app store in the dock or in the applications, but although the app seems to work it does not open on the screen. Using force quit it seems to work normally, but...

  Hello Crusheen!

  Thank you for using communities of Apple Support.

  I see that you can select the App Store on your dock and in the application, but the application does not open on your screen. I want to assure you that you can access the App Store to get updates and download new applications. I have something for you to try.

  I suggest to try it on in a new user account to see if you get the same result it. You can connect as a different user to see if unexpected behavior is related to the user's specific settings or files. Please take a look at the following article to set up a new user account: How to test a question in another account on your Mac user

  Please let us know the results. We're here to help.

  See you soon!

• The screen started after the update of the Sierra

  A few seconds after the awakening of my MacBook Pro, some large highly colorful randomly-shaped defects appear on several parts of the screen. Any suggestions?

  Hi buckeye351,

  I understand that you see some video distorted on the screen of your Mac just after that you wake up from its sleep. Which is certainly not normal behavior. I would like to make a few suggestions to help.

  As a first step, I recommend your Mac NVRAM reset. Take a look at this resource that goes on how to reset the NVRAM:

  How to reset the NVRAM on your Mac - Apple Support

  If you continue to experience this problem, check out this site to see if your Macbook Pro with the Retina display model corresponds to one of the models in question:
  Graphic problems - Support Apple MacBook Pro repair Extension program

  Take care!

• Smooth against a move sharp objects on the screen

  Hello

  I have a number of applications that show the following behavior: when I click on an object on the display on the screen, the object moves * gently * to its position to another, predetermined by the application, position.

  I see this problem on my iMac.

  When I run the same applications on my MacBook Air the moving of objects from home position in the end still happens but in a * sudden * way - i.e. the object jumps abruptly starting position for the finals. The sweetness of the movement I see on the iMac is no longer exists.

  I love soft travel.

  Applications do not provide any parameter to control the way objects move (gently or brutally), I guess it is somehow controlled by the operating system. A parameter is defined differently on the iMac and the MacBook Air.

  (Both machines run El Capitan 10.11.6)

  Someone has an idea of what could be this setting? Or in any other way, I can have a good moving objects on the MacBook Air?

  Thanks in advance.

  FWIW, I do not know why your etrecheck report has been deleted, but you try to run applications on a 4 GB machine too. You should limit the number of objects, connect, and the number of programs you are running at the same time.

• I can do a vertical photo which does not meet the screen

  Is it possible to blur the edges or the bottom when you have a vertical photo that does not cover the full screen? I need suggestions on what to do, so do not always see the black screen. I know that I can put a background behind it, but according to me, the edges of the image are so distinct in this way.

  What seems to have become the default behavior, at least on American television, when it is necessary to introduce video portrait of the TV, is put the image under the vertical of the image, it fits the bottom until it fills the screen and maybe more, then a little blur to hide the pixellation, and finally to darken it, based on the original content.

• Frustrated by the strange behavior of the command SET up FIRST HP!

  I tried to define a function using the command SET the. The function is F = G * M * m / r ^ 2. No matter what I try, I still get the same generic error: INVALID INPUT. I went to the guess, user manual, half a page of information about the command SET. Better nothing, but far from what you would expect if the manual is YOUR main source of information on how to use the calculator. In the first instance, an error, here's what I discovered:
  
  (1) name of the function cannot be long 1 letter. They can combine the capital letters, small letters and numbers...
  (2) variable must be UPPERCASE
  (3) variables can start with a letter and followed by a unique number. ONLY THAT, nothing more
  
  Can someone, confirm please?
  
  It is quite limited. So now, instead of the calculator not work for me I have to work for it. This is the formula I: F = G * M * m / r ^ 2 and that's what the calculator would accept in the screen SET: F12 = G * M1 * M2/R ^ 2, see figure 1. Quite annoying, but I can leave with it.
  
  As you know, G is the gravitational constant: 6.67384 x 10 ^-11.  The calculator is supposed to to remember, so why type it again?  I went to CASE view, called my function, putting fake numbers, just to try it, had G of MAJ > units > Const > physics.  This is how my edit line looks like: F12(6.67384E-11,100,300,25)... See figure 2. Guess what? An ERROR GENERIC, no idea of what the calculator don't like on this subject. After a while, I discovered he does not like the E in 6.67384E - 11, she she likes 6.67384e - 11, and then it throws another error (Bad arguments number) see figure 3. I check everything, it looks all right.
  
  I decided to try my LUCK in the main screen. Everything works perfectly. He doesn't get complaint even the 'E' in G, and I get the result expected (figure 4).

  I went back to the screen set and passed under the name of the F12 function to Forc, put the numbers again, MAGIC, now this market (see figure 5).  So, after all, it seems to be the calculator do not like the numbers the function name, but he didn't complain. Come on guys, you do not buy a top of the calculator online to go through this torment.
  
  Can someone tell me what is the reason for the bizarre behavior?

  Hello

  DEFINE functions MUST respect the rules of the home screen in every way shape and form. For example, the variables must be valid system variables...

  DEFINE function names cannot collide with existing variables/functions names, which is why you cannot use single past uppercase to name...

  If you want to use the names of other variables that the pre sets, you will first need to create them. Betai you can create them in CASES, it is best to create in the House because, as a general rule, it is best NOT to mix things ca and home (it is much slower and is more likely to cause disorders). To create a new variable home user, just assign a value to a variable as in abc: = 5 (or 5-> abc-> where is the arrow of the sto)... You will be asked if you want to create the variable. answer Yes and you're...

  Cyrille

• Re: Satellite A200-1BQ, does not not after the screen saver

  Hi, I have a Satellite A200, 32-bit Windows 7 OS. When you use the screensaver to the PC stop responding. Have to spend because no response.

  If you have a report some problem send it please.

  Hello

  This means that Windows 7 hangs and does not answer only when the screen saver has been activated?
  Have you noticed the same problem with Win XP or Win Vista?

  If not then this behavior of the laptop could be related only to Win 7 and I think that it might be caused by the graphic card driver

  Remove the graphics driver that you have installed and test the screen saver using the common windows driver 7

  It would be interesting to know what is happening

• Satellite M40: Errors graphics when you change the screen resolution

  Hello
  I have a Satellite M40 and a big problem.

  Windows xp pro sp2:
  When a program changes the resolution of the screen, the screen is messed up.
  I see only scratches and only a reboot can run back (or suspend-to-disk).

  [edit]
  I plugged an external monitor to the laptop and it works,
  the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally display also
  [/ Edit]

  Linux:
  This can be seen also at the change of the Xwindows mode in linux back to tty(1-6)

  Here are some pictures of this strange behavior:
  http://www.ronnylindner.de/extern/images/Toshiba/Screen1.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/screen2.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/SCREEN3.jpg

  It looks like a hardware problem, but would it be just a bad bios setting?

  What can I do?

  Goodbye and thank you in advance, Ronny

  Post edited by: [email protected]_DE

  Hello

  There may be something wrong with the screen of laptop computers.
  I guess that the graphics card is ok because the external screen works properly.

  But it s very interesting to know if you are using the graphics driver from Toshiba. If this isn't the case, please check if this problem also appears after installation of the graphics driver from the Toshiba driver page.

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• How to create an animated title that scrolls like a classic title that is too large to fit on the screen of the iPod. How can I do this?

  I would like to create an animated title that scrolls like a classic title that is too large to fit on the screen of the iPod. How can I do this?

  < scratching head > long forgotten, how that will look like...?

  like in this video, around 00:40?

  https://Vimeo.com/11838765

  apply to your text moving or two keyframes and a mask behavior, I would say...

• Equium A100-147: minimize windows whenever I click on the screen

  Whenever I click on the screen (for example, scroll up/down buttons, close x) windows on my screen constantly minimize

  Hello

  Do you mean the window of Internet Explorer?

  I think you behavior is linked to the corrupted registry entries.
  You know it is not very easy to fix the registry keys.

  You try to roll back the drunks at the start point or you try to simply reinstall IE and check if the new facility will help.

• Satellite C660D-16F - horizontal lines on the screen flicker

  Hello
  I'm having a problem with lines flickering cityscape randomly appearing on the screen during a random time (during all kinds of situations, video playback web browsing, the CPU usage high or low, etc.). A very similar behavior can be seen on these videos:

  http://www.YouTube.com/watch?v=wdipBbRzjSc
  http://www.YouTube.com/watch?v=1F2H2vaROqM

  The motherboard has been changed already nothing doesn't.
  From sources around the internet the best current estimate for a cause is the management of advanced power, which dynamically changes the basis (in CPU or GPU) transmission. The deactivation of these (turing off PowerPlay, affecting feeding Windows for maximum performance management, etc.) does not help.

  The issue has been present for months. only 1 BSODS happened, perhaps caused by a directx / display driver problem do not know if there is a link.

  Still could not reproduce the problem (I tried universal stress tests, tests of cpu / memory-vga, etc.). The question is very random.
  System: Windows 7 Prof 64 bit, the latest drivers from the toshiba Web site.

  Any ideas?

  I ve checked this video but I n t see anything.

  On this virtual path is not easy to discuss these issues, but what I want to know is to follow:
  Have you tried to connect the external display and check if the same thing happens again?

  In my opinion, these questions may be result from dysfunction of the graphics card. To find out what the problem may be you need time and more stable. Get the second HARD drive, put it in your laptop, install original Toshiba recovery image and test several days with the factory settings.

  If the same happens again material, it must be related issue.

  What do you think of this?