wbengine.exe process back up Windows server crash

Similar Questions

• 2012 Windows Server crash

  Server Windows 2012 on reboot, crashes every time with an kernel_security_check_failure error. It creates a dump file. Need help on how to solve this error. The critical system event error produces the power of the nucleus. event ID 41.

  Thank you

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I can't access "Device Manager" "MMC", "Run CMD as Administrator" and some .exe files after the Windows system crashed!

  I need help, please

  

  

  

  

  Hi Sirawut,

  I suggest that you perform an upgrade on site to solve the problem with the operating system. Contact the manufacturer of your computer / system administrator for the installation cd/dvd and refer to the article below for the upgrade on the spot.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  WARNING: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  http://support.Microsoft.com/kb/2255099

  Let us know if you need any other help.

• Able to start the app server/process schduler under Windows Servie?

  Hi guys,.
  
  I wonder if there is a way to start the Scheduler of the server/app as a windows service process?
  
  Thanks for any input.
  Bob

  Yes

  For PT 8.49 check here:

  http://download.Oracle.com/docs/CD/E13292_01/pt849pbr0/Eng/psbooks/tsvt/book.htm?file=tsvt/htm/tsvt04.htm#H4048

  For PT 8.50 check here:

  http://download.Oracle.com/docs/CD/E15645_01/pt850pbr0/Eng/psbooks/tsvt/book.htm?file=tsvt/htm/tsvt06.htm#H4051

• Windows Server 2003 R2 explorer.exe crashing

  Hello

  I am looking for help on a PC server.

  All programs work correctly and for all intensive purposes, the server is very good.

  The problem is that explorer.exe crashes every 3 to 8 seconds.

  I had a quick glance at the file hmdp and tbh it means nothing to me.

  Could someone kind take a look on it and maybe point me in the right direction?

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  [C:\Documents and Settings\electrical\Desktop\error files\explorer.exe.mdmp] Dump file loading
  User Mini dump file: only registers, stack them and portions of memory are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows Server 2003 Version 3790 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: Server, suite: TerminalServer SingleUserTS
  Computer name:
  The debugging session: 04:48:47.000 Wed May 29, 2013 (UTC - 07:00)
  System Uptime: not available
  Running time: 0 days 0:00:05.000
  ..............................................................
  Loading unloaded module list
  ..........
  This dump file is an exception of interest stored in it.
  The stored exception information are accessible via .ecxr.
  (b10.700): access violation - code c0000005 (first/second chance not available)
  EAX = ebx 00000200 = 80070000 ecx = 003 has 0038 edx = 00000000 esi = 00000464 edi = 00000000
  EIP = 7c8285ec esp = 00f1a410 ebp = 00f1a480 iopl = 0 nv in EI ng nz cy ac pe
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000297
  Failed to load image C:\WINDOWS\system32\ntdll.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntdll.dll
  ERROR: Module load completed but symbols can be loaded for ntdll.dll
  ntdll + 0x285ec:
  C3 7c8285ec ret

  Any help would be appreciated more

  Colin

  Support for Windows Server is available here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  The forum, you are now aims to help users of the computer at home.

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Acrord32.exe (Windows 7 and Acrobat cc) breaking, can not save the changes, Windows Explorer crash earlier

  Recently decided to upgrade to Acrobat DC after discovering that she will allow me to OCR files that previously forced me to spend of TIFF, and then back.

  I downloaded the program and installed today.  I was the conversion of Acrobat 9.  After that I started uninstalling Acrobat 9 Pro, Windows Explorer has started crashing.  I finally restored the computer

  I checked the Microsoft forums to see what could have gone wrong, and they seem to indicate that I should run sfc in the prompt, then see if there are problems in the registry. Here, of course, began with today or yesterday (which doesn't make sense - not sure that the report gave me irreparable files, or both fixed and fixed, or what). Other research suggests that I do a disk cleanup, and since then I had the problem of Windows Explorer.

  I tried then just install Acrobat DC on Acrobat 9.  This seemed to work properly.  However, now I have problems with Acrobat to crash (although the window remains open?). The message says that acrord32.exe is the culprit.  In addition, a number of my PDF files cannot be replaced - if I want to save my changes, I have to save to a different folder, delete the old file and move the other in its place.

  It's basically a nightmare, and I lost a ton of productivity today putting out fires.  Do not have these problems until I started playing with Acrobat.

  Please give me some suggestions.

  Thank you

  In fact, I could hope to find the solution on this thread:

  Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  Going to see how it goes with the preview pane disabled (although she will suck if I can't use TI - hope you guys who patch).

  Also, add a folder by the instructions under C:/User / [USER] / AppData.

  In the hope that this problem will be solved in between.

  EDIT: It looks like it fix the problem.  Acrobat Pro DC now works without any problem.

• Cannot download files exe on Windows server

  I can not download exe on Firefox installed on Windows server 2003 files. I don't know that it's because of security Windows/IE "features." This does not work under Firefox 3.5, you can add a parameter to ignore these, but for some inexplicable reason with 3.6.
  Is it possible to force Firefox 3.6 to ignore the Windows/IE security settings? Otherwise, I'll need to come back to 3.5 or use IE.

  There are ways around it in Firefox 3.5 and Firefox 4, but not in Firefox 3.6. Firefox 3.6, you need to change the security settings in Internet Explorer - http://support.microsoft.com/kb/923737

• Service using SRVANY. EXE has stopped working on Windows Server 2008 R2

  I have a Windows Server 2008 R2 (64-bit) server that runs as a service for several years a virtual machine VMware Player.  I used the SRVANY old Resource Kit tool. EXE to configure the Windows 8.1 virtual machine to load and run in the background.  This config worked without problem for years and through at least an upgrade of the virtual machine operating system.

  02/06/16, I upgraded VMware Player to version 12 and later upgraded the virtual machine OS Windows 8.1 to Windows 10.  After that, the service that I created using INSTSRV and SRVANY is more years launches the VM.  The service seems to start with success (no errors), but the virtual machine does not start.  I don't see a new instance of the vmplayer.exe process when I start or restart the service.

  Other changes on the Windows Server 2008 R2 server since the last SRVANY config worked were last month security patches.  I have a hard time to believe that upgrading the guest OS could have no relevance here.

  To troubleshoot, I tried vmplayer.exe followed of the file name of the VMX virtual machine from a launch command line.  This works.  However, if I try to run the same exact command from a CMD, launches of VMware Player interface file, but I get a "file not found" dialog box, and the virtual machine does not start.

  I also tried reinstalling VMware Player 12 and temporarily return to VMware Player 6.  None worked.

  Ideas?

  Subscribed to the thread and ping relevant resources.  Good luck

• Windows Server 2012 Remote Desktop "flicker/crash.

  I am running Windows Server R2 Standard 2012 on a server.

  When multiple users use RDP (Remote Desktop Connection) to connect to the server says, those who log after the first connected user (i.e. the user 2, 3, 4... etc) experience a "flicker" of the desktop and applications open close for said flicker when they try to open any application.

  So to explain step by step, once connected to the server using the RDP Protocol, the Server Manager application opens (the only application affected by flicker). Suppose I want to open the Task Manager, so I go to the taskbar, do a task manager, right click. Then the box office disappears for a time, including the taskbar and the background, while the application server manager remains open.

  This happens for all applications other than the Server Manager.

  In addition to this, the first connected user is also affected do not experience the flicker and can run programs as usual.

  As far as I can tell that this has happened since the beginning of the installation of windows.

  My first guess would be that the explorer.exe is crashing, but I can't really verify the said Task Manager.

  I don't have physical access to the server, only a remote connection.

  Everyone knows something like that?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Reference DELL OMSA 6.5 on Windows server 2012 - instalattion - cdegfc.exe error code = 259 error

  Hello, masters!

  I try to install Dell OMSA 6.5 on Windows Server 2012 x 64 and get the following installation error message: code of error cdegfc.exe = 259
  See figure available at: https://www.dropbox.com/s/ns2x73zjtkz5wig/Error_OMSA-65.PNG
  After the error message, the installation is aborted.
  I use the aministrador account to install.

  Can you help me?

  Thank you

  Diramos

  diramos

  So, I ask your help to solve my problem.

  I provided you with the cause of the error and possible resolutions in my first post. I'm not going to spend a lot of time trying to reproduce a problem and find a solution for something that is not compatible.

  diramos

  I ask you to read my previous post.

  I recommend to read my first post and look at possible causes, that I pointed out. If they do not resolve that problem, then post back with more information.

  I try to help as much as I can with material not picked up and software configurations, but since they almost always require reproducing the middle right to solve is not something that I help out carefully.

  Not supported hardware and software configurations are something that you need to fix yourself or with the help of the community. I'll give you the sense when I can.

  Thank you

• Why is my norton antivirus telling me that I have a high utilization of the processor by Wbengine.exe? ON my pc with Windows 7?

  Why is my norton anti-virus alerts me to have a HIGH USE of the WBENGINE processor. EXE? on my pc with Windows 7?

  What this mean and how can I solve this problem?

  Hello maggievandevanter,

  You have an automatic backup or a scheduled backup process turned on? The wbengine.exe is a file, usually located in \windows\system32 and is responsible for scheduled tasks. Please check your task scheduler, if a scheduled task is there.

  Hope this helps,

• Adobe AIR 19.0.0.193 - Windows 7 - crash App - MyApp.exe has stopped working

  My app crashed and think it's something with the latest AIR beta.

  App has receiver eception of errors, but there is no pop up. Only "myApp.exe has stopped working" Windows dialog box.

  App has been normal work for a long time, so I doubt that the bug is in my application, but it could be.

  Accident was under Windows 7 64-bit, 4 GB RAM

  Here are the details of the error:

  Name of the failing application: MyApp.exe, version: 0.0.0.0, time stamp: 0x4eb75ae0

  Name of the failed module: Adobe AIR.dll, version: 19.0.0.193, time stamp: 0x55f764b7

  Exception code: 0xc0000005

  Offset: 0x00153c5d

  ID of the process failed: 0xd34

  Start time of application vulnerabilities: 0x01d1044a1a2a7134

  The failing application path: C:\Program Files (x 86)------MyApp------MyApp.exe

  Path of the failing module: c:\Program Files (x 86) \Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll

  It was a bug in my application. Still wonder why he did not uncaught error events...

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.

• Windows application crashes because of CLR.dll - Windows 2008 R2 Server

  Hi all

  I have a Dot Net Framework 4.0 based on Visual Studio 2010 Professional application that runs as a Windows Service on Windows Server 2008 R2 Enterprise Version Service Pack 1, 64-bit operating system.

  The application appears to hang intermittently and the reason is as below:

  Name of the failed Module: clr.dll, version: 4.0.30319.1026

  Exception code: 0xc0000409

  Offset error: 0x002b79d8

  Path of the failing module: C:\Widows\Microsoft.NET\Framework\v4.0.30319\clr.dll

  May well want to let me know if there is no FIX for this problem of CLR.dll crash? If so can you let me know about the same thing?

  
  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home