Behavior on the previously marked images of face detection

Similar Questions

• Accessibility of the previous backup Image of RMAN copy after roll forward with the additional days

  Hi all

  I have these 2 questions related to RMAN Image backups. Please suggest the best approaches...

  We are in publishing Standard of Oracle 11.2.0.3 database on instances of RAC ASM on Windows 2008 and want to see the feasibility of using Copies of RMAN images for our databases.

  Have a question about the availability of backups for restoration in a scenario explained below:

  1ST QUARTER)

  To get copies of the Image which are rolled to the next incremental backup. Can we still restore/recovery to earlier date than the Image backup before rolls? If not, please suggest

  What is the best way to accomplish this task if we choose RMAN COPY of IMAGE as our backup strategy.

  Example:

  Log archiving is enabled.

  Sunday evening: full level 0 backup copy Image

  Monday night: 1) level 1 incremental Image copy backup and Roll-forward/apply the incremental backup for the full backup from Sunday

  (2) backup of files to archive log after the full backup from Sunday.

  Tuesday evening: 1) level 1 incremental Image copy backup and Roll-forward/apply the incremental backup for roll Monday transferred (full) backup.

  (2) backup of files to archive log after incremental backup from Monday.

  Wednesday evening: 1) level 1 incremental Image copy backup and Roll-forward/apply the incremental backup to roll Tuesday transferred (full) backup.

  (2) backup of files to archive log after incremental backup on Tuesday.

  Can we restore and recover the data until Tuesday morning 11:00 even if our full backups are rolled transferred by the application of incremental backups. Please suggest

  What is the best way to accomplish this task if we choose RMAN COPY of IMAGE as our backup strategy.

  Q2)

  Q2.a) Scenario 2: with above politics of backup in the 1st quarter.

  If I intend to use the copy of current Image backup on WEDNESDAY NIGHT for the recovery and restoration on-site. understand that

  We're losing backup of forwded for the roll of Wednesday night. Is it possible to take a backup/backup copy of this Wednesday night before being used for on-site recovery, so that we can use it

  for all future restorations.

  Q2.b)

  If we are unable to take backup of the night't Wednesday backup before being used for the recovery on the spot. We can always access backup Image roll passed Tuesday night? If so, can

  I take a new incremental Image copy backup Thursday night and roll forward/apply to copy backup Image Tuesday night. Please suggest the best approach to have accessible backups for each night?

  Thank you

  Hello

  I suggest that postpone differentials apply for a week as says Hemant.

  for example:

  grab the copy of database with tag = "incremental_update" until ' SYSDATE-7 "; ". "

  1 extra strength to recover from backup with tag = "incremental_update" database;

  Talip Hakan Öztürk

• automate the image with the previous editions

  Hi everyone thanks for your time.

  I need to make a very difficult task for me, I have a text of the circle, I need to create an action to rotate the text of circle 1.8 degrees, save it and turn then 1.8 degrees of the previous saved image, it must be done 200 times, briefly, to rotate image save 1.8 °, rotation of previous saved 1.8 ° rotation of previous recorded 1.8 °, turn from previous recorded 1.8 °... until he reach 200 rotations.

  Thank you very much.

  You can also create text on a path may convert into a form to stroke and fill.  Rotate this layer with a script I posted. The displacement of the 200 out of the layer group the script layer put them in remove the Group layer and the background. Create an animation of image and make the frames from the 200 layers.   If the interpolation does not work for you. I never tried to tween and rotation of the transformation. Do not the size of the large canvas this gif of 800x800px is 4 MB in size. I used the script I posted to create 200 layers. Made of the MP4 mod is also 4MB turned faster on a black background video does not support transparent backgrounds. The video is so white letters on black background. You don't see the black around the letters and white ghost outline that you see when you click on the animated gif below and jive displays the gif in his image popup window. Also 200 images in gif animation is a batch of images. If each image is completely different image than many unique pixels and especially you are probably too many colors to make a good animation Gif. GIF supports only 256 colors mapped.  If your image size is 800x800px all in all you 800x800x200px 128MP something like 380MB in Photoshop. The smallest 600 x 600 gif animated here is BW and transparent still gif file size is 5 MB.

  

• Hello, I just bought a 58 I want to know how to activate the face detection and in what mode I can use

  Hello, I just bought a 58 I want to know how to activate face detection and in what mode I can also use how to click pictures in mono

  Press the Fn key, select (smile/face detect.), then select the desired setting. When the exhibition is set to [Sweep Panorama] or [tele-zoom suite priority AE], [face detection] cannot be used.

  If my post answered your question, please mark it as "accept as a Solution.

• Bug? Weird behavior of previous marker in the timeline goes to keyframes?

  I can't understand this point, but when I hit my shortcuts for next and previous marker, while on a timeline, it prevents not only the markers on the timeline, but also stop on the clips THAT ARE NOT MARKERS HAVE. My only wonder is some of these clips would have keyframes on them, and some of them are timewarped. It stops on these things for some strange reason? Mind boggling.

  Thank you!

  Huzzah! I thought about it. I still have "Dual display frame markers" lit. Now, I realized it stops on the double frame markers. When I turn off the power, the behavior is only historical markers.

  So I guess all technically not a bug, the concept of chassis and markers of what I would call marks the user item are two very different things... Please test and let me know if anyone feels this way? I trash preferences and behavior is always the same.

• Updated to 39.0 curser now do not show marker titles in the API Google maps unlike the previous version, what has changed?

  If you open this link http://edwardfrey.com/map/2015.html a map with markers. When my cursor hovers over the mark a title appears. If you click on the marker of a pop up will show newspaper when you click will opens a page of newspaper on the date indicated in the pop - and there will be a map included in Scripture upwards to this day here.

  The roadmap also has markers with titles. Before 39.0 I could hover and see the title, now I can't. When I move the pointer to the marker cursor turns into a hand, in the previous 2015 map the cursor turns to a pointing finger.

  Example: Click on the marker - 0 - then log. This web page http://edwardfrey.com/peregrinating/period61.html#11
  December 11, 2015 with a map showing the three markers that all have the title but I can't see them.

  I fixed my problem FireFox 39.0 title of marker. I started using Internet Explorer 11 for all of my web site work and evidence/change what I did. About a third of the visits to my site, use FireFox although I don't know how use the 39.0 version. The problem of the title existed before it got worse and there are probably few of these FireFox users each glance at my cards yet less hover over the marker to see the title. Problem solved!

• Adding faces process is slower than the previous version

  It's feedback to Apple.

  The previous version of Photos where you can select a large number of photos at once, was much faster than the current version that shows you only a maximum of 8 photos at once.

  Other questions:

  If you take lots of photos (of your children, for example), you could not go to Faces often enough to stay with her. As a result, I just spent two sessions of 30 minutes + to select 1000 photos of my daughter's face. Previously this would have taken 10 minutes on the smallest thumbnails.

  Once you click on ' Add and continue "could you realized you made a mistake, but you can't go back. You must enter the mass of photos later and try to find the error. I think it is much easier to do things when you evaluate a volume at a time.

  When you click on ' Add and continue "ago a long processing time to get to the next batch of 8. You start to lose focus when there is such a gap. It makes the whole process very tiresome and repetitive.

  Probably other things.

  It would be great if this process could be reassessed at some point.

  My Mac specs: 8 GB, 3.5 GHz Intel Core i5, AMD Radeon R9 M290X 2048 MB, end of 2014

  It is strictly a user help forum and Apple isn't here - you can give them your comments here - http://www.apple.com/feedback/photos.html

  LN

• Windows 7 Image Backup - where can I find the previous image after new backup?

  My previous hard drive died, and I replaced it.

  Good news: I did a backup of the system before the death of completed HDD.  The image is under "WindowsImageBackup" folder on my external drive.

  Then I replaced the HARD drive, picked up at the factory reset.

  Before restoring the image backup, I took a step extra stupid: I thought that I should save its current state before as I have restore the previous state in case any thing wrong, so I started to sign--> system and security--> backup and restore--> backup now

  Bad news: the new backup image sub-folder of "WindowsImageBackup" even erased my previous image!  They have different timestamps, so different names, but the previous image has disappeared after a new creation.  In fact, I killed the new backup process immediately after that I was disappearing from the previous image.  He has not finished, but I can't find my previous image!

  BTW, there is a lot of space on my drive.  It is only 20% used!

  Are there ways I can retrieve my previous image?

  BTW, I use Windows 7 Home Premium.  By default, all parameters are as I do factory reset.

  Suggestions and help is very appreciated!

  Hello

  With the publication of the description, I understand that you have accidentally deleted the system image backup file. I've certainly you will help answer your query.

  I wish to inform you that there is no way to get the previous system back image - which has already been replaced however, you can try a few steps to get the old image to the top, although there is no guarantee that it will work but still, you can try and see if it helps.

  First of all, I suggest you to rename the WindowsImageBackup to WindowsImageBackup. Old then follow the screenshot and select the option highlighted in yellow color select another backup to restore files of.

  

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

• The substitution of the previous button behavior

  I develop my widget on BlackBerry WebWorks plug-in for Eclipse v2.5.1. I use only one HTML file for all my screens.

  Right now "back" button out of the application itself. I tried to check/uncheck "Override the default behavior of button"return"to exit the application" option but no luck.

  And I want to disable the previous button on the home screen but did not find any document to change its behavior.

  Let me know that you need more information

  Help, please.

  Thank you.

  Take a look at the event of onHardwareKey() that you can intercept to be able to make the back button to do what you want

  http://www.BlackBerry.com/developers/docs/widgetapi/BlackBerry.System.event.html

• The access key to select the previous and next image

  Hi all

  I did a lot of research, but I can't seem to find an answer to this.  I already know which keys scroll to the previous or next < and > frame but they only scroll; they do not pick.  Is it possible to use the keyboard to select the previous or next image while selecting as well?  What I mean by select is that if, for example, I selected the transform tool and I use a keyboard shortcut to scroll to the next section, I must also click on the image with the mouse before I can turn.  Or, if I have the align Open box, I can use a keyboard shortcut to scroll to the next section without the need to click on this image before I can align.

  I hope that I have explained this clearly.  In any case, I would like to know if there is a way to do it.  Thank you.

  Create a jsfl file that contains:

  var tl = fl.getDocumentDOM () .getTimeline ();

  var selectedFramesA = tl.getSelectedFrames ();

  tl.setSelectedFrames (selectedFramesA + 1 [1], selectedFramesA [selectedFramesA.length - 1] + 1, true);

  and save that as selectNextFrames

  //////////////////////////////////////////////////

  create a 2nd jsfl file containing

  var tl = fl.getDocumentDOM () .getTimeline ();

  var selectedFramesA = tl.getSelectedFrames ();

  tl.setSelectedFrames (selectedFramesA [1-1, selectedFramesA [selectedFramesA.length - 1]-1, true]);

  and save that as selectPreviousFrames

  ///////////////////////////////////////////////////////////////

  Add two jsfl files to folder Commands and then create shortcuts for each in the edit keyboard shortcuts Panel.

  on win 10:

  C:\Users\\AppData\Local\Adobe\------\Configuration\Commands

• How can I get the green check mark image in APEX?

  How can I get the green check mark Image that appears whenever an action is processed in the APEX?  I use the Application Express 4.2.1.00.08.  I need to add the image of mark in a column on a report that shows the lines that have already been discussed.

  Can someone tell me how to do this?

  I was able to produce the report with the following:

  Select case when Status = 'closed '.

  can ''

  else ''

  end as "completed."

  'ID', 'PROJECT', 'TASKNAME', 'START_DATE', 'END_DATE', 'STATUS', 'ASSIGNED_TO', 'COST', 'BUDGET '.

  TASKS

  Once you add this column of the report, change the properties of the REPORT of the region, then the columns (filled) ATTRIBUTES and change the setting "display as" 'Standard report Column'-, this allows the browser to "make" image compared to only print the text string of the "img" tag

• Copy the settings of the previous image, without setting the

  Dear comrades,

  Could you help me please, how can I put in place to get rid of copy the settings the (eg. brushes, stain) in the function 'copy of the previous image' (previous button at the bottom of the develop Panel)?

  Thank you very much

  John

  The Previous function always takes all the developments.

  Use the function to copy & paste the developments, it will ask in a dialog box that you want to copy changes.

  https://helpx.Adobe.com/Lightroom/help/develop-module-options.html#applydevelopadjustments tootherphotos

  http://blogs.Adobe.com/jkost/2014/01/quickly-paste-develop-settings-in-Lightroom-5.html

• Previous slide images appear on the next slide...

  In Captivate, when I add a new slide, the previous slide boxes and images appear on the new slide.

  They are not clickable and I am unable to remove them, but when I preview the blade in a browser, images etc. are not there. What is a graphics problem? I use a retina 13 '' MacBook Pro.

  Thank you.

  I also use a retina display, do not think it is related to that.  There are some possible causes. Maybe, but you have these timed elements "rest of project" don't check off the option "Always we top", which could explain why they do not appear when published if they are covered with normal objects on a slide. Less likely: objects on the slide used or main slide?

• I bought and downloaded an image on my desktop, but the water mark is still there. How can I get rid of him?

  I bought and downloaded an image on my desktop, but the water mark is still there. How can I get rid of him?

  Follow the steps in these screenshots: I bought a stock image and I can't seem to upload the image under a license without the watermark? Please help

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge