How to replace the < root windows > file \system32\ntoskrnl.exe on a system running Windows Server 2003 for Small Business Server when the system does not boot without it?

Similar Questions

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• Upgrade CPU, system does not boot, winload.exe "Windows cannot verify the digital signature for this file.

  Subject pretty much said it all.  I got a new CPU, shut down the computer, installed, and now Win7 does not start.  It hangs on a black screen gripe on a signature file.  Here is the full text:

  "A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."

  If you have a Windows installation disc, insert the disc and restart your computer.  Click 'Repair your computer' and choose a recovery tool.

  Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration.  If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  File: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file. »

  Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer".  Charge, said he found a problem, said he has fixed the problem and restarted.  But it always hangs on the same screen of the error.

  So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen.  I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.

  Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.

  Help?

  I don't know if this post will solve your problem, but it can give you new ideas or angles to try.

  http://www.lifeworldblog.com/computers/Windows-7/Windows-cannot-verify-the-digital-signature-for-Winload-exe

• Had to replace the motherboard: System does not boot, the XP installation disc runs to a failure.

  Thus, the motherboard in my PC started to die.  I replaced it.  Start-up of the new system has prompted a Safe Mode boot.  Choose Safe Mode, the system restarts after mup.sys.  Choose the last known good startup the initial windows screen appears briefly, then restart the system.  Boot from the original installation disk, all kinds of drivers charge then the last message that appears is loading Windows Executive.  A
  BSOD appears stating something to the effect of an error with the hard drive, verify the presence of virus, remove the new hard disks, etc..  Hard drives is a virus.  So, how do you round a re - install defective and/or repair or a defective Mode start safe mode with new material?

  Thank you

  Hello

  Since you have replaced the motherboard, you may need to reinstall the operating system.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to troubleshoot the plugin does not not in Acrobat

  Hi all

  I am just starting to develop my Plugin and I'm unable to troubleshooting / debugging.

  First of all, a bit of history:

  I start with a simple example, based on the example of BasicPlugIn that adds a menu item that displays a form of language c# .NET. I have the .NET extracted via a C++ wrapper shape.  I'll call the wrapper of the plug. At this point, the MyPlugInCommand method has a single line:

  CFW CoyoMenuFormsWrapper;

  This line is simply instantiated the exported class.

  If I DELETE this line and debug, everything is great. I touched my breakpoints and the menu item is displayed in Acrobat format.

  If I LEAVE this line and debug then nothing. No point of debugging, no menu item.

  I suspect this is a. Problem loading the DLL and I conducted depends.exe the and it showed nothing unusual. The exported dll that has the wrapper (Adobe2Net) is present and reported in detail.

  Acrobat records all errors that might give me a clue? I see nothing in the event logs or ProgramData. Any other suggestions on how to troubleshoot the loading has failed?

  Thank you

  Mark

  .

  Just followed this issue closely.

  I could get my plugin to work if the DLL in the folder plug_ins, but which was not possible for me. I opted to go down the road of COM Interop and it works very well.

  Thanks for the help.

  Mark

• How to make the password does not expire at all times.

  Hi all
  
  
  I have to set passwords for users do not expire, I have to change the password every six months.
  
  How can I make password does not expire at all times.
  
  Default tablespace, SPODIL
  Temporary tablespace, TEMP
  DEFAULT profile
  User created, XXXXXX
  (Locked) status, OPEN
  Password expires Date, 6/27 / 20105:59: 39 PM (I do this expiration date forever)
  Date of the lock,
  External name
  
  
  You can help.
  
  
  Thank you

  So what profile do you want to not apply the limitation of password change?
  Choose 1 & change it, and then make sure that this profile is applied to all users

• System does not boot: failure of the video card or viruses? I do not know...

  Here's the deal: on a computer running Windows XP Pro SP3. Athlon, dual-core processor (2.4 gHz); 4 GB of memory; NVidia GeForce 7300 video card; and a Western Digital SATA, I met a failure while watching a DVD (using Media Player 11) and now I can't start.

  I have been having problems for a few days with my Dell flat screen monitor "energy saving" mode because it has detected no signal. After playing with this and obliging to recognize a digital signal rather than the automatic detection, all seemed well.

  During the film, the picture froze, the sound became a loud, grating buzz and shut down the system.  It has restarted as usual, but then would not start the rest of the way, stopping at the Windows XP screen.  The progress bar froze and spinning to stop the drive.

  However... on occasion, for example when the system remained some time, I can sometimes start in safe mode (but still, it hangs when starting "mup.sys") or he will move to the XP logon screen and freeze it.  I replaced the mouse and keyboard (whiched USB connections) used with their equivalents of PS/2, but nothing has changed.

  When I try to start, I hear all the clicks Associates, snoring and whatever else as if the startup continues normally.  However, when it stops, I can't "see" it on my network.

  I have a hunch that it is a damaged video card because also the failure during the film and previous issues of monitor, when I hit the map to try to reinstall, he felt much warmer that it should have, but a video card failure would prevent initialize to top?

  Any ideas?  I'm all that.

  It does for me, but of course as I said in my previous notice of Disclaimer: I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. MS - MVP - Elephant Boy computers - don't panic!

  I understand that.  I was looking for another opinion by giving an update.

  However, it certainly seems that the jury went.  It freezes even trying to boot in the BIOS setup.  Thanks for the directions.

• System does not boot into Windows when a USB is installed

  It's strange.  I just installed Windows 7 Home Premium Upgrade (64-bit) of a previous Vista machine.  Has made the choice of 'Upgrade '.  Now that it is finally installed and get some of the bugs resolved, a question I still have is when a (key, post HD) USB device is installed in the machine and I run a reboot or extinguished/turned on, the system starts to boot, runs through the BIOS section, but just before trying to start Windows I get a fast blinking cursor in the upper left of my screen.  If I remove all the devices usb between PC and manually must shut down and restart it restarts in Windows very well.  What is the problem?

  Desktop HP M9350F model; 64-bit; BIOS Rev 5,29 (28/04/09); BIOS Boot Priority: floppy, CD, HD, network (note: there is no other choice shown/available USB?)

  Maybe someone else has had this problem and an easy fix is avaiable.  Thank you!

  CD,

  Well believe it or not, I realized the problem.  Not the BIOS.

  One program, I have installed is SecureDoc WinMagic.  It's encryption software, although my drive has (yet) been encrypted.  In fact I had contacted the Lim before this same thread started to think it might be because of that, but he told me it was probably my BIOS and nothing to do with their SW.

  However, last night I decided to remove their SW before my "repair" operation was scheduled.  How to have this removed SW, it's just our curiosity, I decided to start once more with a USB device installed to see if the hang up has continued.   By my surprise, the start went as usual by means of windows and office.  DAMN!  all this time lost, mine and yours!

  I contacted the company SW this morning and they found a way to modify their SW and get the boot to work (always with the unencrypted disc).

  I wanted you and someone on this thread to know the outcome, so if this happens in the future with another user, this can help to avoid long-term on unnecessary troubleshooting.

  Thank you once again for all the time you have helped me with this issue!

• System does not boot, get the white screen after preparation for auto repair

  Hello

  I have a Toshiba Satellite with Windows 8 and yesterday there were some ongoing update and must restart.  When the computer reboots, it took some time and then I got a blue screen (very quickly) who said something as she encountered a problem and needs to fix (it is really fast and I can't see the whole text).  Then goes and comes back as it is booting (with the toshiba logo) and he says prepare auto repair.  Then it goes to a white screen. I tried to get into the HARD drive recovery (power with F12) and when I select HDD Recovery and confirm Yes, it just goes to a blank screen.  I went into the Setup utility (powering now F2 while) and has chosen default install and who does not either (although it has fixed the problem with my keyboard backlight does not). Support of Toshiba said that it is the operating system, not the hard drive.  But I need a drive recovery media that will scan all.  Anyone know other options?  I have a disc of recovery of a Microsoft coming 8 Pro (dell).  Would it be an option, to use it (I got it on a flash drive) and start-up of that?  Thanks for the help.

  Hi John,.

  Thank you for the update.

  Given that you want to use the Windows 8.1 recovery disk, you won't perhaps able to start Windows 8 using Windows 8.1 because the computer may not be able to find the files of Windows 8 start to recover.

  Yes, you pouvez install 8.1 Windows using the recovery disk. However, you may not be able to perform the upgrade option when installing Windows 8.1. When you click install now and follow the instructions, you must choose the Custom Advanced option to continue installation. Choose Advanced custom options will create a folder in the C: drive (or any other partition when you do not want to install) named the Windows.old folder which expected to have all of your files and documents of previous installation and are accessible.

  Make sure you have the drivers available for the devices installed on the computer as network card, drivers etc. of video card you install Windows 8.1.

  Hope the information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• For MS WIndows server 2008 Remote Desktop does not work.

  Hello

  We have the following.

  1 VMware 5.5 Vsphare

  2 virtual MACHINE working with MS Windows 2008 ent.

  3 SAP on this server load balancing.

  4. his joints to a domain

  Now, we have enabled RDP and used a user can access to hold off.

  but when we take RDP and entered the IP address on the server mentioned above. It gives the error that the RDP is not activated.

  What we did...

  1 checked any local policy or domain... no problem

  2. check that the RDP port is listened to... no problem

  3. has changed the port 3389... nothing happened.

  4. check for any firewall issue... Order the Windows Firewall... Still nothing...

  Checked port 3389 with telnet... its not going is not to...

  Help, please...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 - Group Policy does not

  Hello

  I recently deployed a windows 2008 (32 std) additional domain controller for our windows 2003 DC. and I moved to make PDC FSMO roles in 2008. now I get error when I open Group Policy and none of the policy is to take users. the error is "the network name is not found.

  I run the command adprep/adprep domainprep/gpprep command when I deploy the windows Server 2008. below error, I get in the event viewer for the same thing.

  "The Software Installation Group Policy Client Side Extension was impossible to apply one or more parameters, because the changes must be processed before logon startup or user system. The system will wait for the treatment group strategy to finish completely before the next startup or logon for that user, and this may result in slow startup and startup performance '.

  Please advice. Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

   

  http://social.technet.Microsoft.com/forums/en-us/categories/

• "isass.exe system error indicates an encountered or specified revision number is not one known by the service." System does not boot.

  My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
  When it tried to reboot, the following message appeared...

  "... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »

  Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.

  Does this mean the registry is damaged?

  Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?

  I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!

  Donnie

  Hello

  Try to start in last know good confriguration pressing f8

  http://support.Microsoft.com/kb/307852

• Installing the graphics card... System does not boot

  Hello

  I received a HP P6-2387ea today (I5, 8 gb, H61 Chipset) with the intention to introduce a new GeForce660 inside that also happened today.

  The PC boots up well with its default material and very well with my addition of a 500 watt PSU... However, when I add in the GeForce 660 does not start, I am rather greeted by 6 beeps to the bios, which is obviously not a good thing.

  My first thought was gpu at fault, but I tested it on another machine and it works fine. I also took a GeForce 460 of this old machine and tried in the new HP one, same result.

  I'm missing something here, or I have a faulty card or something?

  (To avoid responses of stupidity, yes the 500w PSU is a lot and the appropriate pci-e 6pins were attached).

  Any help would be appreciated.

  Bill

  Hello

  First response to your title question is "no, your motherboard is not broken.

  Try this:

  Boot into the bios and go to the Secure --> Secure Boot Configuration topics. Now disable secure boot and turn on legacy mode. Now let's see if the PC will start using the material existing HP before you make any changes. If the PC starts, then try just a video card.

  View your results.  I have a suspicion about what the issue is for the motherboards that are active UEFI.

  --------------------------------------------

  Side note:

  It seems someone is trying to find an answer to this question using different HP computers as a way to find the answer when the PC is delivered W8 and active UEFI.