Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

Similar Questions

• "Windows Setup cannot continue because a required driver could not be installed" while improving to 64-bit

  I'm trying to install windows 7 64 on a 32-bit with the custom installation option. All is well until that right at the end of the installation it gives me this error "Windows Setup cannot continue because a required driver could not be installed. I tried this several times but the same results. I used the windows Upgrade Advisor to see if my computer is compatible and it is no problem.

  Error image: http://imgur.com/lOVj6eX

  Restore the previous installation of Windows and do the following:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

• "SQL Server 2005 Setup cannot continue because the installation package could not be opened."

  Hi, I use a 64 bit OS on my computer and I have a problem. AdminStudio gives an error message when running this program.

  "SQL Server 2005 Setup cannot continue because the installation package could not be opened. The installation package has a missing file, or you run a single installer 32 bit on a 64-bit computer. To continue, verify the SQL Server 2005, you use the package is supported on WOW64. If you are sure that you are running a SQL Server 2005 supported packages, and you continue to see this message, contact the vendor of the application. »

  What can I do about?

  Thank you!

  Hello again,

  Thanks, I solved this problem. This program installs 32-bit as the default value in the path of the folder. This is why it does not work when everyone works beginning... But there is a solution for this topic...

  Exactly the solution:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22625

  Note:

  SQLEXPR32. EXE is a smaller package that can be used to install SQL Server Express on 32-bit operating systems only.

  The larger SQLEXPR. EXE package supports installation on 32-bit and 64-bit operating systems (WOW install).

• Setup cannot continue because the downloaded file has not been digitally signed by Microsoft. Please try again later.

  I have windows xp 32-bit.  I have a LifeCam VX-1000.  I do not have the CD, but when I plugged it the first time, Microsoft Wizard found the driver and installed it without a problem.

  Ran fine for 2 months, then I plugged it in today, I got the "new hardware found".  First OFF... what happened to the driver?  I have not installed anything new.  And then, it will not re-intsaller driver.  He invites me for a CD when I try to update the driver through the Device Manager, and when I try to run LifeCam 3.22, I've downloadedMicrosoft , he says "Setup cannot continue because the downloaded file was not signed digitally by Microsoft. "Please try again later."  WTF?  I downloaded from microsoft. How could he not be digitally signed by microsoft?

  How to get back the 'life' in my LifeCam?

  The LifeCam 3.22 file could have been damaged during the download process.  Download a new copy. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Small Business Server 2011 Standard access to download

  Hello

  I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.

  They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.

  Thank you for your help.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Small Business Server 2011 Standard

  Could not change domain.local to domain.co.nz on Small Business Server 2011 Standard

  Hello

  Your Windows question would be better suited in the Technet forum.  I suggest that you post your question in the Small Business Server forum.

  Small Business Server
  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Thank you

• Network connections small business server 2011 does not start

  IV installation Small Business Server 2011 in a new site. Initially, I set up in the workshop and installed open office 2010, Manager of symantec endpoint protection (not client) and shadow protect for backups. When I got on-site network connections service wouldn't start and everything which needed high permission would not be executed. I have disabled UAC in the registry for the directory services restore mode and it gave me more access but would not start the network connections and 5 exchange services start. any ideas? Thank you

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Small Business Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support you

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Using a Macbook Pro with Microsoft Small Business Server 2011 Standard edition

  Hi, just a quick question about the new Microsoft Small Business Server 2011 Standard Edition.

  My company is currently doing this new server installed and I have a new Apple Macbook Pro.
  Could help me is it someone please let me know if I will be able to use the Macbook Pro in conjunction with the server, that is, I'll be able to use remote access to Microsoft exchange with my Mac?
  Thank you very much

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the forums of Small Business Server. Please post your question in the Small Business Server forum.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• Satellite P300 - 18 M - Windows Setup cannot continue

  Hi, my first post here, hoping for any help.

  I recently bought a Satellite P300 - 18 M, from an independent retailer with no return policy. good on the PC is a brand new, sealed, etc and I get the Toshiba standard warranty.
  When I do the initial installation I received a message all in settng upward of Windows Vista Home "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click on 'OK' to restart the computer announced then rstart installation. »
  I tried a few times more full-time catering and the third HARD drive it installed, but...
  either he starts, I get to the password screen then all invent locks, the mouse pointer freezes then the screen becomes full of horizontal lines.

  or

  I've had a few times in windows for a few minutes (2-5 minutes) then the mouse pointer freezes, 3 seconds later the entire screen is full of horizontal lines, everything locked can only turn off the coast.
  Toshiba software error, so no warranty claim and advised that I buy the DVD (£29.90) that I ordered it, on a delivery of 14 days of recovery.

  Any other help or suggestions much appreciated as im not confident of this DVD, being a brand new sealed unit, why corript of Vista in the first place.

  Thanks in advance

  Andy

  Hello

  In my view, that the P300 is equipped with the ability to drive HARD recovery. This means that you could restore the operating system of the image that is stored on the HARD drive.
  To do this, you will need to power the laptop and must press the F8 key.

  A start menu should appear, then you should choose the first option called fix my computer.
  Then, you must choose the option called Toshiba HDD recover or something like that. It should be the last option.
  This procedure helps you reinstall Vista again.
  This facility could be that you can burn the own recovery disk using the preinstalled software called Toshiba Recovery Disk Creator.

  But if the recovery of HARD drive does not work you will need to use your orderly recovery DVDs and have to restore it again.
  If the laptop will not properly work after using Recovery then DVDs I recommend to contact the ASP again and to explain the whole story.

  Good luck

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Small Business Server 2011 hangs on 'Apply the settings of the computer' at startup

  Small Business Server 2011 hangs on "Applying computer settings" on startup and can only start in safe mode

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/SBS/gg985359

  Hope this information helps.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• «.. . restarted quit unexpectedly or encountered an unexpected error. Windows Setup cannot continue... »

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. »
  
  I have this error message and called technical support from microsoft, we have tried to reinstall Vista again once I had tried three times with the same error message. It would freeze to "complete installation." even let him all night to see if he needed more time to complete on its own, but nothing helps...

  the technician told me I have a hardware problem, but when I installed XP on it everything works correctly.

  It's a new pc and a clean install of Home premium. I re-post this question since yesterday

  Hi evan9074,

  So was the question then? You can run the Windows Vista Upgrade Advisor to see if there are compatibility issues that you have with hardware or software that would prevent an upgrade to Windows Vista.

  I hope this helps.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/