Best idle 1080/60 p (setting an optimal sequence) export performance

Similar Questions

• the setting of OPTIMAL in the rollback segment storage

  Hello
  in metalink note subject: ORA-01555 "Snapshot too old" in very large databases (if you use the Rollback Segments)
  DOC - ID: 45895.1
  I see:

  Solution 1d:
      ------------
      Don't use the OPTIMAL storage parameter in the rollback segment. 

  But how not to use the OPTIMAL storage parameter in the rollback segment?
  Thank you.

  If you use undo_management = AUTO (in 9i or more), then there is no "BEST" setting

  "OPTIMAL" is when you use the manual Undo with Rollback Segments created by the DBA.

  If you use the manual Undo management, check your Rollback Segments. The optimum size would be visible in V$ ROLLSTAT.

  select a.segment_name a,  b.xacts b, b.waits c, b.shrinks e, b.wraps f,
        b.extends g, b.rssize/1024/1024 h, b.optsize/1024/1024 i,
        b.hwmsize/1024/1024 j, b.aveactive/1024/1024 k , b.status l
  -- from v$rollname a, v$rollstat b
  from dba_rollback_segs a, v$rollstat b
  where a.segment_id = b.usn(+)
  and b.status  in ('ONLINE', 'PENDING OFFLINE','FULL')
  order by a.segment_name
  /
  

  To unplugged the Optimal adjustment you can run

  alter rollback segment SEGMENT_NAME storage (optimal NULL);
  

  Note that if you unset OPTIMAL, then your Rollback Segments will remain in very large formats, if and when they grow up running of important transactions ("OPTIMAL" is the method of pre - 9i to Oracle automatically reduce Rollback Segments). You can manually SHRINK or DROP and then CREATE Rollback Segments.

• How to set preferences Indesign EPub export book

  Hello

  I tried to set the preferences to export EPub for Indesign book. The EXC_BAD_ACCESS error occurred during the processing of the command.

  Please someone give me the solution.

  InterfacePtr<ICommand> ePubExportCmd (CmdUtils:kSetEBookExportPrefsCmdBossCreateCommand());

  if (ePubExportCmd is nil)

  break;

  InterfacePtr < IEPubExportPrefs > iEPUBExportPrefs (ePubExportCmd,IID_IEPUBEXPORTPREFS);

  if (! iEPUBExportPrefs)

  break;

  iEPUBExportPrefs->SetEBookFormat(kEPub2);

  bool sta = CmdUtils:ProcessCommand(ePubExportCmd);

  Thanks in advance.

  My guess without a glance at the command:

  value list of elements of the interface ICommand app or doc workspace...

• Where is the setting of the ProRes export?

  I own 7 FCP and see not where I can set up a sequence of Prores export NOR outside in 10-bit uncompressed (animation)... basically my deliverable is Prores... but can't find anywhere Prores parameters.

  I have to import from somewhere in my CPF app?

  Here are pictures of my available sequence settings...

  In the export dialog box, select Quicktime.   Ignore the preset.  Now, go to the video Codec in the video tab, and then choose Animation, Prores, etc., it's all there.

• Best way to display a set of data rows (15 + columns)?

  Hey,.

  I have a set of data rows in a data from a JAVA call control. Rowset contains about 15 + columns of data that I need to display to the user in a grid. What is the best way to achieve this? When I try to drag the control of data lines in the AMX only obvious choice page seems to be seen list but I can't just use some columns in a list view. Or an iterator. I guess I should use iterator somehow, but what is the best way to present this data?

  Manually, you can go and edit the list to add more columns and place fields in them.

  Check out the application workbetter to see some models list (for example, people discovered) sample.

  Oracle Mobile Application Framework samples

  You might want to rethink your design and have a limited set of fields appear in the list, and then when you select a list item data show the rest of the info.

  a very large list is perhaps not ideal for a mobile screen.

• Best setting of the sequence

  What is the best configuration of the sequence combining clips AVCHD (1920 x 1080) for a possible release on BluRay and HDV (1440 x 1080)?

  If you use both types in the same project, I'd go with the sequence of 1920 x 1080.

  [Original post edited to the correction of data.]

• Best fps for film loop setting.

  Hello, I use Adobe Flash CS6.

  It is a simple question.

  There are 2 bitmaps, image A to image B

  and I put in a movie clip as a AABBAABB symbol and I put like 30 fps fps,

  but 1 frame of 30 frames per second is 0.03 sec and 1 frame of 15 images/s is 0.06 sec. This means that 2frames of 30 frames per second = 1 frame of 15 frames per second.

  so if I have reorganize them as ABAB with 15 frames per second, it plays like 30 fps done in this situation.

  So, I have a question, what setting is better?  15 images/s is much better for the old PC?

  'the lowest setting possible while maintaining desired quality'

• __Details: studying why 38% (11 007) events were lost during data collection. Settings for Windows event trace (ETW, Event Tracing for Windows) buffers, the buffer size and maximum is perhaps best not according to data sets are collected. __

  need to know how to enlarge events tracing buffers

  What is the size of your swap file? increase the size and place it in the root of your systemdrive!

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Optimal catalog size / Performance issues

  Hello

  I was wondering, is what size a good catalog - if inverse geo-location and facial recognition is enabled.

  Problem: So far, I've had a single catalog for about 30,000 photos. I recently reinstalled my PC and thought, that it would be beneficial (after various OS upgrades and Versions of Lightroom) to make all things new. However, despite the powerful Hardware, it seems that Lightroom is facing serious problems with the number of photos in this catalogue and says little. Now, I wonder if break the number of photos in smaller catalogues would help.

  Hardware specifications:

  CPU: I7 - 6700 k

  RAM: 64 GB

  GPU: GTX 1080, 8 GB

  Lightroom is installed on a SAMSUNG SSD Pro 850 / 1 TB

  The pictures are on an other Samsung SSD, EVO 850 / 1 TB

  Software:

  Windows Pro 10

  6.6 Lightroom

  Do you have any advice? Or can Lightroom generally manage the number of photos easily and more exist somewhere a mistake?

  Thanks to advandce

  Michael

  @trashner @dj_paige: thank you both.

  6.6 Lightroom formed - what I would call 'the perfect storm '. 6.5.1 also first, problems of performance handling of faces in the largest catalogues (I'll explain later). With 6.6 and known issues of performance and memory, by head screeen personas to a wiered Lightroom application behavior difficult to answer and sometimes. Why not everyone knows this? I suppose that, because most of the users to install LIghtroom 6.6 as an update to an already existing and fully indexed catalog.

  Then, my experiences with 6.5.1 were as follows: generally more rapid then 6.6. But, when I went to the screen personas, the application started late, but, fortunately, to a degree where it was still a little sensitive. So while 60% of the faces (30,000 pictures, which took more then 15 hours) have been recognized for the complete catalog, I had the opportunity to 'play' nearby. And I discovered a few interesting things: once again, the application when booting with the root directory of the catalog is still slow and accept suggestions of name is not funny at all. But I have the files/catalaog organized in folders and subfolders (year and month can, for the most part) and began to experiment with subfolders as starting point. And all the sudden Lightroom has started to become much more quickly in many ways. Face recognition from one subfolder to another (on avareage 300 Photos) began to speed up a lot and also work with name suggestions, etc. became easy. When I went a hierachy upward (meaning a year), with sometimes 6,000 or as little a few hundred speed, was a kind of uproportional goes downwards or upwards depending on the number of photos in this directory. While the indexing/recognition was still not fully filled 6000 pictures mean, hard to work with it and 500 is very easy.

  Then, I started to activate up to 1000 subfolders and waiting always face rocognition was completed. That took a few minutes. I repeaded that for each subdirectory and been fact within 2 hours for the remaining 40%. In this way the recognition of work face 3-4 times faster, then having lightroom do the recognition for the entire catalog at a time.

  Then I started to work on the suggestions of name etc. also based on subdirectory to subdirectory, which was still much faster, and then the applicaton behaved when the entire catalog has been selected.

  Conclusio

  -With the help of 6.5.1 instead of 6.6, was an important stepp.

  -However, the answer to the question of the optimum size of catalog would be:

  (a) catalog can be very very large

  (b) but to speed up the recognition of faces and to work with her, breaking the process into pieces of 500 photos.

  See you soon

• 1440 p video shows in 1080 p on youtube after the first export.

  Nice day!

  Then. I don't know what I'm doing wrong, but after the video export 1440 p of first it's shows in 1080 p after uploading to youtube. However if I download the source video of watch as 1440 p.

  Here is my rendering settings:

  

  I don't really know what I can do wrong in this case. It's all pretty simple.

  I'll be grateful for any help.

  Oh, wow... it becomes finally 1440 p. After almost an hour. For the 45-second video. And it is much faster with the video source. I guess it's pretty random.

• set of pages while exporting an article out of InDesign

  Export DPS Article in InDesign:

  Miss me the ability to set the pages I want to export to an article. Today you must export all all of the pages of time. It's on the roadmap? If not, where can I do a feature request.

  Thank you

  Haha

  Hi haha, you use a single InDesign file to create several articles? You have experimented with different layouts in the same InDesign file? That would help with your particular workflow.

  Export of specific page isn't on the roadmap. On the plan where to make a feature request, good question! I don't know actually. But, you've done pretty well just the feature request. :-)

• Setting the presets for export assistance. FLV

  I need help to customize the presets to export a file to the .flv format. Here's what I need Adobe export to:

  . FLV

  320 x 240

  4:3

  800 Kbps

  29 97 fps

  Audio - 44 khz 66 kbps stereo

  Jesse_Martinez (Calvary)

  Your needs are specified in the

  . FLV

  320 x 240

  4:3

  800 Kbps

  29 97 fps

  Audio - 44 khz 66 kbps stereo

  You can accomplish almost all in the first of 12 elements, but there is a problem reaching the exact audio sampling combination speed/flow that you list.

  In first Elements 12, go to publish + share/computer/Adobe Flash Video and presets select = FLV - great NTSC Web Source (Flash 8 or higher) On2VP6 MP3 FLV

  On the Advanced Settings button and video tab, adjusts

  Remove the link between the height and the width of the frame and the type of

  Width of the frame = 320

  Frame height = 240

  Bitrate = 800 kbit/s (kilobits per second)

  On the button tab / Audio advanced, adjusts

  Output channel stereo =

  Bitrate settings - This is where it gets complicated... There is no set rate/frequency = 44 kHz sampling or other. There is no audio bitrate of 66 kbps (64 Kbps is closest to you), it seems to be a sampling frequency associated with export, but visible once you have export and examine its properties in a program like MediaInfo.

  Here's what I found

  If the audio bitrate is 64 Kbps, sampling rate is 22.05 KHz

  If the audio bitrate = 80 Kbps, sampling rate is 22.05 KHz

  If the audio bitrate = 96 Kbps, then the sampling frequency 44.1 KHz

  If the audio bitrate = 128 Kbps, then the sampling frequency 44.1 KHz

  Are there trade-offs for you, or you must have the exact values you posted?

  H.264 AAC F4V

  If you export your Timeline as F4V, so you can create sampling rate of 44.1 KHz and bitrate 64 Kbps.

  We can discuss the other parameters not mentioned later once we have worked around the core ones.

  Please see the bulletin.

  Thank you.

  RTA

• If my support is 1920 x 1080 I can create a custom sequence?

  Hello

  Currently, I work on FCPX and want to upgrade to Adobe, but before I do I don't know if she will achieve everything that I need.

  I work with the media of 1920 x 1080, but we deliver in several aspects.  FCPX allows me to create sequences with any aspect.  First can do the same?  Without media strectching.  For example we deliver sometimes 960 x 544 is this something I could create in Adobe?

  Any help would be appreciated.

  Thank you

  For example we deliver sometimes 960 x 544 is this something I could create in Adobe?

  Yes.

  Creating and changing sequences

• Best settings for video taken with an iPhone 4 export?

  What is the best way to do it and keep all the quality? The presets I get?

  These work perfectly for the IPhone 3, so I see no reason why the should not give the same result in 4.

  Just copied from CS5.

  

• Where to place the sequence inhabitants in a setting of the sequence? up, down, left, right?

  Hello

  I have a sequence with multiple images and I need overgive of some values in an image to the image through sequence inhabitants.

  Where should I put the local sequence? On the top or bottom of the frame? Perhaps on the right?

  If I put them on the right side of the frame wiring looks good in one but it's ugly as part of another.

  How are you?

  Greetings

  Johannes

  Hi Johannes,

  Although this is not necessary, it is better programming practice.

  You might need to make changes in the future, or to use the code in another, similar project, then its way easier to implement when you used a before state machine. And this isn't a lot of work changing a sequence to a statemachine, except that you have hundreds of frames/States.

  Back to your first question, it depends on your taste where you place the tunnels in the sequence.

  Christian