Best method for updating CompactRIO data to Server "National Instruments.Variable Engine.1"

Similar Questions

• Best method to update PowerEdge BIOS/firmware offline

  Hi all

  I read in this topic for a week or 2 and trying to figure out the best method to keep all [reasonably] updated, on an independent network. I was recently watching in Dell Repository Manager and it seems that this could be what I need, but I was wondering what other options I might have.

  It is for the most part on a stand-alone network and especially Linx or ESXi

  What are the best options to keep all components up-to-date?

  See you soon,.

  Tim

  Timbo475,

  Depends on the server you use, but you have a few options. If the server is located in a few years, it probably has the lifecycle controller (F10 at startup). If you access that you can go to the updated platform and use the ISO you create Repository Manager to update with.

  Let me know know the server models that you use, and I can clarify.

• best method to update the primary key

  Can someone tell me the best possible method to update the primary key so that the foreign key is also updated.
  Please explain with example

  940340 wrote:
  Can someone tell me the best possible method to update the primary key so that the foreign key is also updated.
  Please explain with example

  You're after a mechanism that lets you update the primary key sometimes on some lines, or did you just impossible, which means that you must update all the data because of some kind of change in the structural definition?

  If all you need is a rational method to change keys sometimes (and this isn't quite mortal sin that other posters have been suggesting) then recreate your foreign key as a constraint can be delayed may help.

  Oracle allows no you cascading updates automatically for primary keys, but if the foreign key is carried forward you can proceed as follows:

  set constraint {foreign key constraint name} deferred;
  update parent primary key;
  update child foreign key;
  set constraint {foreign key constraint name} immediate;
  

  Concerning
  Jonathan Lewis

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Best practices for a NFS data store

  I need to create a data store on a NAS and connect to some servers ESXi 5.0 as a NFS datastore.

  It will be used to host virtual machines less used.

  What are the best practices to create and connect a datastore NFS or networking and storage view bridges in order to get the best possible performance and decrease is not the overall performance of the network?

  Concerning

  Marius

  Create a new subnet of layer 2 for your NFS data warehouses and set it up on his own vSwitch with two uplinks in an active configuration / eve of reunification. Uplink should be variously patches in two distinct physical switches and the subnet must have the disabled bridge so that NFS traffic is not routable in other parts of your network. NFS export can be restricted to the IP address of storage host IP (address of the VM kernel port you created for NFS in the first step), or any address on that subnet. This configuration isolates traffic NFS for performance, ensures the security and redundancy. You should also consult your whitepapers of storage vendors for any specific recommendation of the seller.

  Data warehouses can be made available for the guests you wish and you can use Iometer to compare PAHO are / s and flow rate to see if it meets your expectations and requirements.

• Best workflow for updating of interactive forms initially created in InDesign

  Abdoulaye

  Using InDesign CS6 and Acrobat X (10.1.4)

  I created an interactive form 2 page with InDesign exported as an interactive PDF Acrobat applied fields scroll, names twisted the color of the text and fonts, etc.

  But now, I'm not sure of the best way for the form to have some updates that actually change the layout a bit, I think I have to work from the original InDesign file once again, but how to avoid having to recreate all the fields I added in Acrobat.

  Just trying to create an efficient workflow, start from scratch does not seem the best option.

  I made the spaces that contain the fields in the form of white rounded corners and shadows on a color background in order to consolidate the brand image, however all this in InDesign and I now "you wonder if it's a good idea.

  So now demand additional two drop-down lists and a medium additional field I have to adjust the design layout, I don't think that can be achieved in Acrobat.

  You can copy text from one PDf to another fields and retain all properties? Suppose so I set the background and copy the fields in place.

  Any help appreciated.

  Thank you

  Replacing the old pages with the new, it is how this situation is most commonly treated. It preserves not only the fields, but also other interactive elements that you have such as bookmarks and links. Any code at the level of the document, you add and document actions remain as well.

  Fields can be copied a page at a time, but before 11 Acrobat, are not glued in place, so you may need to do some repositioning. This generally results in the smallest file size, but can be tedious.

  Regarding everything in InDesign, CS6 can be implemented in the fields, but there are a number of limitations and bugs that reduces the usefulness of this feature. For example, to set the font for a field or add JavaScript actions.

• Best method for mouse over image

  I want to just make sure I go about it the right way.  I have a line of images when you hover over the image will be display.  I was going to create a div for each image that contains the original image.  Then I was going to create a behavior of hover for each div that would then change the image.

  Who is the best method, or is there another way?

  CSS, if they contain links:

  http://ALT-Web.com/demos/CSS-sprites.shtml

  http://www.tutorio.com/Tutorial/pure-CSS-image-rollovers

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Best method for multi-developer Server Variables / multi-server environment?

  In addition to having a development environment on my laptop and my desktop computer, we have a staging server and a production server. In addition, we have one or more developers and contributors who may have one or more development that is clean environments.

  Each of these environments may have their own copy of ColdFusion (developer, standard, enterprise - everything is required) and their own copy of SQL Server Express / whatever, their own data source name, the name of user of data, password data, names of CF mappings and so on.  So, while SQL tables and the structure of the code directories is all the same, there are many different things from one to the other.

  Certainly, we need to have a large number of variables so that when someone downloads via SVN commit they don't live, everybody to the top, because they push their own local names in place.

  How do you manage that?  XML file?  CFC? some form of. INI file?   Looking for a solid way to handle this for a multitude of environments and developers, I welcome so see YOUR solution.

  Thank you!

  RLS

  It was the path to enlightenment for us. Hope this helps you.

  http://code.Google.com/p/configcfc/

• What is the best method to implement the communication client-server TCP/IP of multiples?

  I want to make a customer network and multiple server using the TCP/IP protocol.

  I have 30 remote wireless sensors to send data to a server with LabView.  This problem is corrected.

  The server has a router that communicates with the sensors and is connected to the PC via cable net.

  I want to find the way the most effective communication from the point of view of resources and, above all, the response speed of the system, because I want to update the screen as quickly as possible, to send more data per second of the sensors.

  I think I have (only?) two options:

  (* 1) open 30 simultaneous ports and process them in parallel to decode and display the data from each sensor.
  (* 2) using two loops: one to listen to new connections and the other to take the floor, placing them in the 'tail' and decoding and then each of them separately in order to display the data from each sensor. See http://www.ni.com/white-paper/3982/en/

  NOTE: at the moment I have only 4 sensors tested with method 1: it takes about 3 minutes to establish communication (why?), and then it works properly.

  What method would you recommend? Why?

  Thank you all in advance!

  I assume you mean to "Start Asynchronous Call. Which has been added to LV2011. If you are using an older version the method I posted above works fine. In fact, we always use this VI (Manager Spawn of connection, which is the one we wrote) in LV 2011 and 2012 LV.

  In fact I posted this library recently. You can find the code here. That the code implements a queue-based network. You can watch as an example of a server that generates handlers for each client that connects.

• Best practices for the application of client-server (Socket)

  I want to build a client-server application
  
  (1) getting started... client creates the connection to the server and keeps the reading of data from the server
  (2) server continues to send different messages
  (3) given the messages view (Async) client server must be changed
  
  I tried different finished cases against IllegalStateChangeException updating GUI
  
  So, what is the best way to do this?
  
  Please give an example of work.
  
  Thank you
  Vijay
  
  Published by: 844427 on January 12, 2012 12:15 AM
  
  Published by: 844427 on January 12, 2012 12:16

  Well, without testing your code, I can say that if you want to update the ObservableList in updateLobby, you must be sure that this happens on the thread of JavaFX, because only this thread is allowed to update the properties / observable (who are currently in an active scene graph).

  So, I would change the code in updateLobby to this:

    @Override
    public void updateLobby(LobbyListModel[] changes) {
        final String[] ar = new String[changes.length];
        for(int i=0;i!=null){System.out.println(changes[i].getName());ar[i] = changes[i].getName();}}
  
  Platform.runLater(new Runnable() {@Overridepublic void run() {ol.addAll(ar);}});}
  
  

  Good luck!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  

• Best method for SRM

  With 5 guests and replication of VM 75 which method is preferred for best practices

  (1) deploy vCenter SRM

  (2) deploy SRM in dedicated VM (uses vCenter, database)

  (3) deploying MIS in dedicated VM (separate database)

  Hello

  Second option is the best option that is deployed in dedicated SRM VM (uses vCenter Database) because

  The MRS Server works as an extension to the vCenter Server on a site server. Because the MRS server depends on vcenter Server for some services, you must install and configure vCenter Server on a site before you install SRM.

  SRM benefits of vCenter services, such as storage management, authentication, authorization, and personalization of comments. MRS also uses the standard set of vSphere administrative tools to manage these services.

• best method for the implementation of the equallogic line

  Hello

  We recently purchased an equallogic ps4000 who will be used mainly for purposes of DR in a branch.

  The idea is to have a copy of all critical servers on this group of Branch Office.

  My plan was to create a replica of the 'seed' of all servers when the two paintings are at Headquarters (i.e. on the same network). When I then take the painting at the branch there is much less data to be replicated across the WAN. for example

  • Give the 'branch' equallogic iSCSI headquarters subnet address
  • The replication setup (for example, the replica of the seed)
  • Change the IP address of the 'branch' equallogic/group
  • Unplug and take the painting at the branch
  • Resume replication over the Wan

  I was wondering;

  (a) if it is a good plan

  (b) is the best way to do it?

  Thanks for any advice on this.

  Huw

  Yes, it's a way you can do the initial transfer to the DR group.

  You can also read about the Manual Transfer Utility (MTU), the download is on the same page as the Firmware Version you have installed on your berries (on FW download page, find the section titled "EqualLogic Compatibiltiy tools).

  In a nut shell, after installation of the MTU, then using the same system, the connection to the Admin group and in the Tools Menu interface (bottom left), select "Manual transfer utility" as follows:

  

  -joe

• Best method for different endian migration

  Hello

  We intend to migrate our EBS R12.1 using 11.2.0.4 database of Solaris Sparc-64 for Linux x 86-64.

  What is the best choice out of the following methods:

  1. transportable Tablespace - using DBMS_FILE_TRANSFER

  2. transportable Tablespace - the use of CONVERT RMAN

  There are other methods available for the object apart from the two?

  Thank you.

  See also MOS Doc 1377213.1

• Prepare for the new guard cert (1z1-066) data, which is best book for study of data protection?

  Hello

  I've already planned some 1z1-066 exam on the last possible day in September.

  Now, I need to start reading.

  I had once a class of oracle Data Guard like 8 years ago.

  Can someone recommend which is considered to be the best titles of book for the protection of the data.

  Thank you Roger

  I did some quick research for DG books.  There is not a lot to choose from and none of the 12 c yet.  I haven't started on my details page of Oracle Certification Prep exam for 066, so my research on this issue is minimal at best.  That said, the only books I've seen which were reasonable in all were Oracle Data Guard 11 g manual press of Oracle and Oracle Data Guard 11 GR 2 management beginner's Guide by Packt Publishing.  I have not read the books or studied the contents of a.  A warning for me on the Packt flag is that all the of the positive comments on the book seem drawn by the hair.  I've seen this before on other books from this Publisher.  They seem to have a handful of people who write glowing reviews of 5 stars from Packt books within a very short time from the date of publication. This seems misleading just for me. The press review of the Oracle by contract has several times the number of comments on a wide range of dates, and they are almost always positive.

  That said, I would like to reiterate - I have not checked the content of a.  Before I add books that do not specifically reference a review for "Third-party resources" pages on my site, I compare the Table of contents for the purposes of test to see if there is a reasonable correspondence on the matter.

  I'll try to at least a start on a details page for 066 in the coming weeks.  I'm in deep writing at the moment, but I should be able to take a break to search for documentation and articles and whitepapers for Data Guard.

• Best method for zoom - through a Polaroid to a life-size picture?

  Hey guys!

  I've been playing with a few different methods - masks, caches, etc, but I'm looking for quick recommendation about which method is best for this.

  For convenience, here is a picture of reference:

  http://i.gyazo.com/1efa41b89311a22bfa4d2e93550fd5cf.PNG

  I'm looking for "shell" of the polaroid (the white part, all except the picture in the middle) grow until it is outside of the screen, making the image behind it become full screen.

  Tips, suggestions, ideas, recommendations or the tutorials are all appreciated!

  Thanks in advance,

  Matt

  First, the image of the Polaroid picture must be quite large so that the horizontal dimension of the photo part is at least as wide as your comp if it means 1920 for image or approximately 2200 for boarder image and white. Second, because the image is almost perfectly square you have upper and lower crops. Scale or push with a camera or move the image to the camera. There's not much to it. You could use a matte or a mask on the image and animate the opacity of the mask.