Best method for multi-developer Server Variables / multi-server environment?

Similar Questions

• Best method for updating CompactRIO data to Server "National Instruments.Variable Engine.1"

  Hi all, I have an OPC Client of third-party I want to use for testing with the CompactRIO. Can I specify 'National Instruments.Variable Engine.1' in the OPC server, create a new item of the mutual FUND, go to a variable and then see its value. I use a CompactRIO and I want to send the updated data that I am acquisitionning of for third-party Client OPC, then, what is the best method? Currently, what works, is that I created a shared variable published to network on the LabVIEW host that I dragged in the CompactRIO project. I've created a small loop increment value every 500ms. I then created on the host computer, a little VI, who issued this national value to "" Instruments.Variable Engine.1". Now, is there a better way to do his? Is it something that can automatically fill in manually the Variable of the CompactRIO motor without publishing the shared inside a LabVIEW application variables? Thank you for your time, best regards!

  Thanks a lot for your replies, Drew,.

  I downloaded the OPC UA API and it will next week.

  Thanks again!

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• Best method for mouse over image

  I want to just make sure I go about it the right way.  I have a line of images when you hover over the image will be display.  I was going to create a div for each image that contains the original image.  Then I was going to create a behavior of hover for each div that would then change the image.

  Who is the best method, or is there another way?

  CSS, if they contain links:

  http://ALT-Web.com/demos/CSS-sprites.shtml

  http://www.tutorio.com/Tutorial/pure-CSS-image-rollovers

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Best method for SRM

  With 5 guests and replication of VM 75 which method is preferred for best practices

  (1) deploy vCenter SRM

  (2) deploy SRM in dedicated VM (uses vCenter, database)

  (3) deploying MIS in dedicated VM (separate database)

  Hello

  Second option is the best option that is deployed in dedicated SRM VM (uses vCenter Database) because

  The MRS Server works as an extension to the vCenter Server on a site server. Because the MRS server depends on vcenter Server for some services, you must install and configure vCenter Server on a site before you install SRM.

  SRM benefits of vCenter services, such as storage management, authentication, authorization, and personalization of comments. MRS also uses the standard set of vSphere administrative tools to manage these services.

• best configuration for Small Business Server

  I'm looking for advice on HW and SW recommendations for a small business.  We have 15 users, 20 computers and 3 printers.  I currently have a single Windows Server 2008.  I want to run a domain controller main for all users, file sharing, print server, possibly Windows Update Center and eventually MS Exchange.  I am trying to decide the best configuration of HW with a fairly cheap budget.   I currently have 1 I7 based server with 4 GB of Ram, several IBM servers, P4 306 m (I have 4 +), and a lot of hard drives (all in a half rack).  I also need a decent backup system.

  Can anyone recommend the best configuration of HW player and hard?  Should I analyze server roles?  With respect to the SW, I'm a non-profit and use Windows Server 2008 (at a discount)

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Best method for different endian migration

  Hello

  We intend to migrate our EBS R12.1 using 11.2.0.4 database of Solaris Sparc-64 for Linux x 86-64.

  What is the best choice out of the following methods:

  1. transportable Tablespace - using DBMS_FILE_TRANSFER

  2. transportable Tablespace - the use of CONVERT RMAN

  There are other methods available for the object apart from the two?

  Thank you.

  See also MOS Doc 1377213.1

• Best method for zoom - through a Polaroid to a life-size picture?

  Hey guys!

  I've been playing with a few different methods - masks, caches, etc, but I'm looking for quick recommendation about which method is best for this.

  For convenience, here is a picture of reference:

  http://i.gyazo.com/1efa41b89311a22bfa4d2e93550fd5cf.PNG

  I'm looking for "shell" of the polaroid (the white part, all except the picture in the middle) grow until it is outside of the screen, making the image behind it become full screen.

  Tips, suggestions, ideas, recommendations or the tutorials are all appreciated!

  Thanks in advance,

  Matt

  First, the image of the Polaroid picture must be quite large so that the horizontal dimension of the photo part is at least as wide as your comp if it means 1920 for image or approximately 2200 for boarder image and white. Second, because the image is almost perfectly square you have upper and lower crops. Scale or push with a camera or move the image to the camera. There's not much to it. You could use a matte or a mask on the image and animate the opacity of the mask.

• BlackBerry smartphones abandon the Roxio software? Is mass storage the best method for transferring multimedia files

  Should I give up on Roxio software and rely solely on the method of mass storage to transfer media files?

  I reinstalled several times the software, but whenever I try to use the Roxio Media Manager on my PC max CPU usage of on 100% and dies. Once, he worked - and as posted here by someone else, it seem very good - but each others times it just hangs.

  After reading now widely through this site and several others, it seems there are serious issues with Roxio. So my question for those of you with BB9000 more time under your belt: do I persevere with Roxio or give up and just rely on mass storage? It looks not pretty, but I moved ringtones, video and photographs around smoothly.

  Am I losing on the compression features in Roxio which I don't get mass storage? If this isn't the case, then my inclination is going to be drop Roxio and stick with mass memory until they fix the bugs or I see on this site a better way.

  Thanks to bifocals. I used the MediaSync before and Yes you are right, this works very well for the music. I was hoping to use the Roxio to transfer (and compression) files of images, photos digital high resolution of small files just for occasional display on the BlackBerry. Œuvres drag / move, but I cannot copy a lot of pictures. Not sure if it is a compression problem or if I just need a bigger memory card? I'll keep experimenting. I hope BB/Roxio will receive enough complaints sort...

  Thanks for the reply. Happy ' 09.

• best method for the implementation of the equallogic line

  Hello

  We recently purchased an equallogic ps4000 who will be used mainly for purposes of DR in a branch.

  The idea is to have a copy of all critical servers on this group of Branch Office.

  My plan was to create a replica of the 'seed' of all servers when the two paintings are at Headquarters (i.e. on the same network). When I then take the painting at the branch there is much less data to be replicated across the WAN. for example

  • Give the 'branch' equallogic iSCSI headquarters subnet address
  • The replication setup (for example, the replica of the seed)
  • Change the IP address of the 'branch' equallogic/group
  • Unplug and take the painting at the branch
  • Resume replication over the Wan

  I was wondering;

  (a) if it is a good plan

  (b) is the best way to do it?

  Thanks for any advice on this.

  Huw

  Yes, it's a way you can do the initial transfer to the DR group.

  You can also read about the Manual Transfer Utility (MTU), the download is on the same page as the Firmware Version you have installed on your berries (on FW download page, find the section titled "EqualLogic Compatibiltiy tools).

  In a nut shell, after installation of the MTU, then using the same system, the connection to the Admin group and in the Tools Menu interface (bottom left), select "Manual transfer utility" as follows:

  

  -joe

• Best method for photo ID for the portfolio & how to retrieve images of portfolio as a group?

  Hello!

  I'm embarrassed to say that after all these years I manually choose my portfolio of images in Lightroom and know that there is a much easier way.  What is the best way to mark the portfolio images and then retrieve them as a group?  I can't use the star ratings that I use these for internal sorting on employment.

  Keywords would be the best way to go, i.e. Enter 'portfolio' or 'the portrait portfolio' for selected images?

  How would you then access the entire catalog and search on these terms?

  Thank you so much everyone and the best, Teri

  You can use keywords, color labels, choose the flags, or any searchable metadata field. There is no 'best '. They all work.

  Click on all the pictures and then the filter or smart collections bar will allow you to do research and create the portfolio.

• What are the best practices for use of GLOBAL Variables

  Hello
  
  Please guide how Global Variables can be declared and how they can be initialized.
  
  
  Further please guide what are the impacts of the Variables(if any) world on the memory of the CLIENT or the SERVER, if they are not initialized or released after use.
  
  
  Thank you.
  
  Kind regards.

  There are 255 characters (fixed) - or a less than before, don't know if they still are that length.
  My preference is not to use and use the settings or package variables. There is no real control of globals, so you may find yourself with an applications which has a good number of them which is used only once but which persists during the user's session.

• Best method for resizing bitmap images

  I'm looking for a good method resize bitmap images to adapt to the constraints imposed by a container object with the size will change based on the dimensions of the browser window, etc. Basically, it must be able to evolve to adapt.
  
  I use the following to the resizing of height. «largeImage is a bitmap object.
  
  ratio = largeImage.height/newheight;
  largeImage.height = newheight;
  largeImage.width = largeImage.width/ratio;
  
  The problem is, the images look resulting slightly serrated and not really the quality I was hoping.
  
  Is there a better way to do this in as3?
  
  

  Add the following seems to greatly improve the quality:

  largeImage.smoothing = true;

• Best method for writing functions

  Hello
  These are two functions. They are almost the same, except the "select into".
  Y at - it a good way to combine the two functions and how best to reduce the code pl/sql unnessary?
  

  FUNCTION get_row_total_text
  RETURN VARCHAR2
  IS
     my_row_count_total_text  VARCHAR2(10000);
  BEGIN
  
    my_row_count_total_text := '';
  
    -- generate the 'total' column function call
    SELECT 'edr_rpt_lane_by_class_package.gen_total_lane_count('
                         ||'lane_id, '
                         ||'direction_id, '
                         ||'interval_start_date_time, '
                         ||'interval_end_date_time, '
                         ||'range_low, '
                         ||'range_high, '              
                         || MIN(site_lane_id) || ', '
                         || MAX(site_lane_id) || ') "COUNT"'
    INTO my_row_count_total_text
    FROM edr_rpt_tmp_report_lanes    ;
    
    
  
    RETURN ', ' || my_row_count_total_text;
  
  END;
  
  FUNCTION get_row_total_pct
  RETURN VARCHAR2
  IS
     my_row_count_total_text  VARCHAR2(10000);
  BEGIN
  
    my_row_count_total_text := '';
  
    -- generate the 'total' column function call
    SELECT 'edr_rpt_lane_by_class_package.gen_total_lane_count_pct('
                         ||'lane_id, '
                         ||'direction_id, '
                         ||'interval_start_date_time, '
                         ||'interval_end_date_time, '
                         ||'range_low, '
                         ||'range_high, '              
                         || MIN(site_lane_id) || ', '
                         || MAX(site_lane_id) || ') "%"'
    INTO my_row_count_total_text
    FROM edr_rpt_tmp_report_lanes    ;
   
   
    RETURN ', ' || my_row_count_total_text;
  
  END;

  Published by: Muriel Ram on December 7, 2009 12:34
  
  Published by: Muriel Ram on December 7, 2009 12:36

  Try the following (not tested):

  FUNCTION get_row_total_text
  RETURN VARCHAR2
  IS
  my_row_count_total_text VARCHAR2 (10000);
  my_row_count_total_text_1 VARCHAR2 (10000);
  my_row_count_total_text_2 VARCHAR2 (10000);

  BEGIN

  my_row_count_total_text: = ";

  -generate call function of the column 'total '.
  SELECT ' edr_rpt_lane_by_class_package.gen_total_lane_count_pct (')
  : ' lane_id, '
  |' direction_id, '
  : ' interval_start_date_time, '
  : ' interval_end_date_time, '
  |' range_low, '
  |' range_high, '
  || MIN (site_lane_id) | ', '
  || Max (site_lane_id)
  IN my_row_count_total_text
  Of edr_rpt_tmp_report_lanes;

  my_row_count_total_text_1: = my_row_count_total_text | ') 'COUNT' ';
  my_row_count_total_text_2: = my_row_count_total_text | ') "%"';

  RETURN «,» | my_row_count_total_text_1 | ',' | my_row_count_total_text_2;

  END;

  You can still find to find answers for questions of Justin...

• What is the best method for a video output to a monitor on the new iMac?

  I noticed that the new iMacs don't have an HDMI port. How can I get a video signal to a monitor in the sequel of my editing?

  Thank you.

  Tom

  in the accessories kit was without adapter?

  Search on amazon for mini hdmi port, from display connector<10€>