Best performance for use no disc

Similar Questions

• T420-best SSD for use in housing Ultrabay caddy?

  What is the best SSD for use in the Ultrabay caddy in a Thinkpad T420?

  Welcome to the forum!

  Any standard 2.5 "7mm or 9.5 mm SSD should work. I'd stick with brands such as Crucial, Samsung or Intel and are looking for the cost lowest to higher capacity. Considering that the T420 is now several years old, that I doubt that go with the SSD that has specifications "faster" will make a difference in practice.

  BTW the Ultrabay works at speeds of SATA-III (6 Gb/s), so it shouldn't be a bottleneck compared to the internal drive Bay.

• For best performance, I use tweak 'DISABLE PAGING EXECUTIVE'?

  Hello

  make the final installation of my new office station

  with cs5 production premium and victory 7professional

  I7 - 930, 24 GB of ram ddr3 mushkin, 12 hdd (all raptors of k 10)

  (at this point, I'd rather not RAID)

  Basically, everything has its own drive: os, final render, effects, media cache, previews, "scratch disks", etc.

  2 questions:

  (1) with 24 GB of ram can I still a pagefile?

  (currently I have 1 hdd configuration in the SWAP file)

  (2) using the tweak "disable paging Executive" would help performance?

  again, I have more confidence users adobe Googling for answers...

  Thank you

  j

  1. Yes.  ALWAYS have a pagefile.  It may not be necessary a lot with 24 GB of RAM, but your system may crash hard without her, if it is never actually needed.

  2. I wouldn't worry on this subject.  With that much memory, you're not likely to see much difference.  And Win 7 64 manages memory did MUCH better than XP.  So better to let her do a job without being bothered by the user.

• Best practices for using MSE8350 with VCS Expressway

  Thanks for the tips and suggestions!

  Given that VCS highway is the only entry point from the rest of the world into our network of videoconference, what is the best way to deploy and use an IP MSE8350 GW?

  Organizations put it outside their firewall next to a fast track to allow of the older endpoints direct dial in the menu of the GW IP system? We have one that does nothing and I'm trying to figure out what to do with it. (bought before that I'm here).

  Thank you!

  It always depends on what the needs are. It can be deployed inside, outside, both in combination with the

  VCS or even autonomous.

  I have often seen it deployed inside, so she can speak the TMS to receive directories.

  This deployment also gives you the ability to reach endpoints on the IP addresses of the internal network.

  The VCS-E (and (C) have an option for a back fall alias, you can simply set the address of the

  IPGW. In this scenario, a call to the ip address of the vcs-e will hit the ipgw inside.

  This limits also all external ip for VCS-E (s) connectivity.

  For me its sad to see that the IPGW is end of life, I think it would be perfect as an IVR system

  and could be combined with for example the conductor.

  If you still can't find a way to use it, feel free to donate to me ;-)

• What is the best pen for use in the sketch on an air2 iPad?

  I use adoniit but he blames a delay and even if its configured is not very accurate... anyone can help. I use the app Sketch

  What Adonit pen do you use?

  I use the latest bluetooth Adonit Jot Touch w/pixel and it works very well on my Pro iPad with apps that he qualified for work.

  Is this Sketch (is that Adobe sketch?) app compatible with your stylus to Adonit particulsr?

• How can I get the best performance for the games?

  I have a Satellite A30 151 and he has an ATI mobility radeon 9000 igp 128 MB. I had a few problems in the game. I couldn't t get sufficient performance when executing some basic games. Are there updates or updates to driver for my ATI radeon display driver to increase his "performance?
  Answer [email protected].
  Thank you...

  Hi Ercan

  In my opinion, this is a common problem with laptops because performance laptops are not as on desktop computers, and there is no longer any possibility for updates as on desktop computers.

  Try to set all the graphics settings at a lower level. Maybe the performance will be better. I do it with the games I play.

• Wanted: Recommendation for the best Flightstick for use with MS Flight Simulator - a century of Aviation

  Hi people,

  I have a new Sony's Vaio laptop, OS is Windows 7 Home Premium 64 - bit, an old MS Flight Simulator, but no Flightstick.

  You know a pretty beautiful Flightstick to fly with all the stuff in aviation a century of Aviation?

  I'd be happy to get your recommendations.

  Thank you best regards &.

  IOC and rainer Systemengineer

  Discover the site Web of CH Products.  They make several different types of game controller as well as a really nice broom handle and accelerators.  They also make rudder for people really in flight sims.  I have owned their products in the past and found them to be quality stuff.

  Best

• What are the best practices for using Lightroom in two places

  Here's the problem:

  Photographer working weekends and holidays at another place with a second laptop (no).  Photographer wants to keep two separate but identical to the entire photo library copies and the catalog LR for safety.  At the end of a period of work at location 1, photographer wants to take all the changed files (some new, some just changed) and update the LR and the library catalogue to slot 2.  This could be done via the internet, but it is perhaps more practical transport changes on a disk "intermediary".

  Does anyone have an opinion on the best ways to do this?  Is there a way to just export (as the catalog) files and the changed files and then import it into a different location?  Manually copying files of photos that we think have been modified to run the risk of missing some.  Just copy everything means carrying close to 2 TB and this will also take a long time before each trip.  Not so convenient every weekend.

  Tips and ideas appreciated.

  Create a smart collection - published in X days. Select it and export as catalog, including negatives. Keep to the other computer and import the catalog to enter the catalog of another computer (or just open it directly). Reverse the process to bring things back.

  John

• What is the best CMS for use with DW - CS6

  DW CS6 using, what would be the recommended CMS to use?

  Ok.  Well boom is a good starting point.  But there are moments where it may not be the right choice.  There is no one-size-fits-all CMS.  They are big, small, and all the rest. So base your choice on the following criteria.

  • needs of the customer,
  • ease of use,
  • budget,
  • coding skills necessary to deploy it.

  OPEN SOURCE:

  ================

  Get some Simple CMS-

  PHP, no database required.

  http://get-simple.info/

  WordPress

  PHP MySql & required

  http://WordPress.org

  COMMERCIAL

  ================

  Adobe Business Catalyst (subscription includes CMS & web hosting)

  http://www.BusinessCatalyst.com/

  You might also be interested in the products of the Web help to build your own CMS:

  CSS Web sites customized in Dreamweaver with extension Design | WebAssist

  Nancy O.

• What are the best practices for use of GLOBAL Variables

  Hello
  
  Please guide how Global Variables can be declared and how they can be initialized.
  
  
  Further please guide what are the impacts of the Variables(if any) world on the memory of the CLIENT or the SERVER, if they are not initialized or released after use.
  
  
  Thank you.
  
  Kind regards.

  There are 255 characters (fixed) - or a less than before, don't know if they still are that length.
  My preference is not to use and use the settings or package variables. There is no real control of globals, so you may find yourself with an applications which has a good number of them which is used only once but which persists during the user's session.

• Best practices for color use in Adobe CC?

  Hi all

  Is there an article that describes the best practices for use of color in Adobe CC?

  I produce a mixture of viewing online (PDF, for the most part) and real world print projects - often with the obligation for both. I recently updated my PANTONE + bridge books for the first time in ages and I am suddenly confused by the use of Lab colors in the Adobe Suite (Illustrator and InDesign).

  Everything I found online, looks like Lab color mode preferred to use because it is device independent. And perceptual (on screen), it looks much closer to the color, it is trying to represent. But when I mark a Spot color Illustrator rectangle using laboratory coordinates, to the sides of a rectangle using PANTONE + bridge CP and then export it to PDF, the version of CP to mix CMYK color corresponds exactly to my Pantone book - while the version of laboratory (after converted to CMYK using the ink Manager) is far away.

  I have this fantasy to manage only a single Illustrator or InDesign file for both worlds (PDF) printed and online. Is not possible in practice?

  Any info describing the basic definitions of the color modes - or even a book tracing more than use them in the real world - would be much appreciated!

  Thank you

  Bob

  Here are a few best practices you can already do.

  1 make sure that your color settings are synchronized on all applications.

  2. use a CMYK profile appropriate for your print output. Lab spot colors convert to CMYK values based on the CMYK icc profile.

  3. include icc profiles when save or export pdf files

  In theory, your imagination is possible today. It requires color management and the use of icc profiles. You can place RGB images in InDesign and use Pantone colors in your objects. The problem lies in the printers. If a printer uses a RIP with built in Pantone library, the colors will match when printing. Unfortunately, this kind of CUT is more expensive and not enough printers use them. Most of them is always manually approximate CMYK values composition given Pantone colors.

• Best material for editing?

  I want to upgrade my computer to edit it. I have an iMac 2011: 2,5 GHz, memory 4 GB, AMD Radeon HD 6750 M 512 MB. I plan to buy another iMac. with a budget of $2500, what would you recommend for best performance for editing? I would emphasise quality video card, memory RAM, or disk (4 cores, 7 carrots, fusion, etc...)?

  Download video card with MOST of the vRAM.  That means generally that you will also get the quad core i7 with Turbo Boost technology (acts like one 8 cores when you need it - and presents itself as 8 cores with MenuMeters.) The 2013 iMac had a 'backdoor' easily add RAM, and if this is always the case - buy an extra set of 16G of Crucial or some other 3rd party and add it yourself - you will make savings (if I remember) about $200.  If I had to start everything, I would have also obtained the reader of the merger, but the internal (regular) hard drive in the iMac Gets a pretty decent read/write speed (about 130 MB/s) but not what you really want with video editing. The proposed internal SSD is fairly low, so, I generally recommend external SSD drives and their construction schedules. USB3 is fast. Love at first sight would be better, but it's still expensive. An SSD in USB3 is quite impressive (I get about 300-400 MB/s R/W for one and 370-435 on the other). You can get a USB3 box for $10-$40 (Amazon has a housing Kdlinks now, limited time, for only $9.95!) and you can find a 500 GB SSD for under $ 200 these days. I bought Crucial SSD (I have a little bit o 'too o' Scottish blood in me), but what I've read, the Samsung EVOs are among the fastest (~500MB/s).

  -VRAM so Max it is possible! (- what it takes to get this top of the line card... graphics you have it.) - and lotsa RAM (you can buy 8 with mac + 16 crucial for 24 which will give respectable service) - fast external drives are a nice addition.

• C: transfer disc 500 GB external drive and re - install XP for best performance...

  Can I safely move my C: drive to my external 500 GB drive and re-install XP for best performance, and then replace the files & C: files transferred by car to ' puter?

  N ° it will not work. Copy your data to the external hard drive, and then make your own install if that's what you want. But take a look at the "slow computer" information below first. Certainly you should backup your data to the external hard drive regularly even when.

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode. It's very much slow (like being in 1985). See Hans-Georg Michna here information - http://winhlp.com/?q=node/10

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html
  MS - MVP - Elephant Boy computers - don't panic!

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• What is the best laptop to use for first Pro 2015 cc?

  I am currently using a Macbook Pro with:

  Processor: 2.9 Ghz Inter Core i7

  Memory: 12 GB 1600 MHz DDr3

  Graphics card: Intel HD Graphics 4000 1526 MB

  Should I update my graphics card?  When I work with .mov, when I read his jerky.

  Eric advice is correct... especially with the 4K more for a standard video.  4K editing or even several stream 1080 p with effects requires a laptop much 'bigger' than what you have.

  In the meantime, before acquring a new machine, you can:

  1. increase the system memory of the laptop, as Eric suggested, of at least 16 GB or more

  2. I suppose that you have only one hard drive Bay and not two in your machine. If you have a spinning mechanical hard drive... is a 7200 RPM or, ESPECIALLY if you have a disk of 5 400 rpm... Replace it with a quality SATA III SSD.

  The best, especially for editing purposes, is the Samsung 850 Pro model... the prices are down and they are now more affordable. Start with a model of this SSD 256 GB or more. Crucial SSD 200 MX are almost the same in quality, but they are cheaper... no other SSD is recommended due to other types of used controllers.

  You would like to clone the image of your hard drive in the new SSD using an external USB 3 docking station to connect the SSD drive in as a "cartridge"... they are cheap (~ $25 - $ 30). Then place the new drive in the internal Bay. Even if you would use that one disc, the new SSD would greatly improve the speed of data read and write operations and overall performance of the computer.

  3. If your machine has 3 USB port, it MAY (or may NOT), be able to take advantage of what we call 'USAP '. This would allow an external drive, such as the Samsung Q1 SSD to operate at nearly the same speed as the internall SSD. For example: a new Samsung 850Pro would go to over 500 MB/sec read and write compared to the humble 150 - 75 MB/s of the HARD original internal drive. A Samsung Q1 might run externally at over 400 MB/sec in reading and enter vs 200 Mbps USB 3 WITHOUT 'USAP '. This would allow you to place all the media, project files, presents a preview and export to the T1, while placing the media cache and the cache files on the disk SSD internal flash for easy removal when the projects are completed. The high-performance T1 can be plugged into other machines to get back to work. Speed training is VERY IMPORTANT and may be the main cause of current sluggish performance, but also inadequate hardware components. Of course, you can ALSO have high speed external port 'Thunderbolt', but using this port storage solutions are very expensive.

  4. MORE IMPORTANT! Since it seems that the GPU on your machine is low, you may need to 'transcode' the images you want to edit in a more EASY codec for your machine to manage.  You can try the DNxHD "visually lossless" codec to Quicktime.  Windows users can also use the "Cineform" free of the Go Pro webssite codec... I don't know if Mac users can use Cineform, being a Windows Guy.

  If you are a serious Editor, you will DEFINITELY need a new machine very soon. For optimal performance, users are building Haswell E Windows desktops with the 5960 X overclocked to 4.5 Ghz CPU and a GPU of NVidia 980ti and either 32 or 64 GB of memory system.  They use a Samsung 850 Pro SSD as a boot drive for the OS, programs and Windows pagefile ONLY.  All other files, go to the new Samsung 950 NVMe PCI DSS Pro who has read more than 2 GB/s speed and 1.5 GB/s write speed AND which is "two-way", meaning that it reads and writes at the same time... Unlike SATA, it relates to one or the other and not BOTH at the same time. For the greater data capacity, a large RAID 0 array off the coast of 3 or moreSamsung 850 SSD Pro motherboard can also provide fast performance.