C: transfer disc 500 GB external drive and re - install XP for best performance...

Similar Questions

• My 500 g external drive is almost full, how do I continue with a new drive

  Hi, I started using lightroom 6 months ago and now my 500 g external drive is almost full.

  How can I continue using a new disc? Should I create a catalog by using exactly the same name or drag the catalogue old through without the actual RAW photos?

  Eirephoto wrote:

  ...

  Maybe 6 months work and 38 000 of Canon 1 d & 5ds raw photos are too much to have 1 catalog?

  I work only with 1 catalog, I should create new catalogs more often?

  No, I know users who have photos of 250,000 in a catalog and run them properly. Optimize the catalogue allows from time to time.

  Gossweiler beat

  Switzerland

• How better to transfer files to one external drive to another

  How to transfer files from one external drive to another?

  You can drag individual; or just select and drag as a group by holding down the Option key for you key keep on #1 Drive until you are sure that they all copied over correctly to Drive #2...  Or you can select all/copy/paste.    Do not erase the files from the first drive until you are certain that they all copied properly.

• To access the files on Western Digital MYBOOK 500 GB external drive

  I'm on a PC running Svc Pack 3 Windows XP and had a Western Digital MYBOOK 500 GB external drive connected works very well and
  then I moved my PC set-up to another room and my problem began.

  When I turn on the system detects now the MYBOOK so I sent a message to Microsoft and received the following response:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.
   
  YET, if I unplug the power of the MY BOOK and plug it back... it is now fastened on my system than the 'G' drive and I can open it, see the directory of the file but cannot open or access data.
   
  Also, once it is detected, I get the message balloon of text to the following address:
  Windows - delayed write failed
  Windows was unable to save all the data for the file G:\$Mft.
  The data has been lost. This error can be caused by a failure
  your network connection or computer hardware. Please try
  to save this file elsewhere.
   
  And when I click on a specific file I get another message
  The path for the file name G:\1Dons (2) \5Funstuff (2) \cmptrguy.ppt is not valid
  Please check that the path and the name are correct.
  "WHAT CAN I DO TO HAVE ACCESS TO THESE FILES - IT ' S ALL MY CURRENT WORK GIRLS ACTIVE
   

  Looks like you have a corruption of the data on your disk/file system.  Once you are able to mount as a drive letter, try to perform a check of the disk drive.  The procedure accelerated this:
  Double-click "My computer"-> right click on the drive-> properties-> tools (tab)-> click 'Check now'--> check that the two options-> start.

  or follow the procedure here:
  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  Please keep in mind that it can take more than two hours to perform according to the size of the disk and the amount of corruption and if they're using USB1, 2 or 3.  In cases where corruption is bad, sometimes this can make matters worse so if you can back up all the files in the first place, do.

  The one and only true definition of a 'Important file"is"a file has been saved.

  HTH & good luck,
  JW

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• How drive letters are assigned to external drives and file path names?

  How drive letters are assigned to external drives and file path names? MyBook is a drive letter (M) when it is connected to my desktop computer and another letter (L) when it is connected to my husbands office, USB key has the same letter, no matter what usb port is used. Is the letter assigned when the file is created and does not change? or is it to the port to which it is connected to? in what computer?

  Each computer assigns the player to the first drive letter not used in alphabetical order.  It makes no difference what port it connects to.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• I bought the copy of the creative cloud 5 years ago hard drive and installed it on my old computer. When I got a new computer I saved my applications on an external drive, and then when I tried to put them on my new computer none of them would start.

  I bought the copy of the creative cloud 5 years ago hard drive and installed it on my old computer. When I got a new computer I saved my applications on an external drive, and then when I tried to put them on my new computer none of them would start. What can I do to fix this?

  Adobe applications cannot be copied from one machine to the other, they must be installed using installation files.  Remove everything you put on the machine and use the CC cleanup tool after that.  Acquire the installer to the desktop application, then get the applications through which.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• Want to reinstall XP but the computer does not recognize the cd drive and does not allow for any installation.

  Accidentally deleted some system files and now the computer won't allow me to install anything. Tried to install a new cd player to replace a corrupt, but it does not recognize drive. All the driver and OS install CD. Help.

  Fix missing files:

  Try to run the checker system (CFS) files.  Press start, select run, type: SFC/scannow

  SFC will ask your installation disc (which you must have if you are going to re - install), put it in the drive when requested.  Leave the SFC to replace all missing or corrupt files.

  To resolve the startup problem:

  Check your BIOS Setup and make sure the optical drive is enabled and listed before the hard drive in the boot order.  When you start, there will be a message, "type any key to boot from the CD-ROM."  Type any key (execpt shift, shift caps lock, NumLock, etc) will cause the CD to be initialized in the installation program.  (I use the space bar, it's an easy target.)

  In addition, it would be useful to know a few more things: 1) what edition and service pack level of Windows XP you are running?  (2) what is the model and manufacturer of the optical drive, please?

• How to transfer a version of acrobat bought and already installed on another computer?

  How to transfer a version of acrobat bought and already installed on another computer?

  Hi Troy,

  , It seems that you contacted Adobe and a colleague already correct serial number with you.

  Let us know if you still any help in this regard.

  Thank you

  Yann Arora

• device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic__

  device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic
  in troubleshooting, he said I must be connected to the internet, which I am connected via my LAN with yellow cord. If anyone knows how to solve this problem, it would be much appreciated. Ive called microsoft and they were lying to call back me within the hour and im still waiting for them :(

  Hello
  Direct link to the site Reltek with drivers below:
  Driver Realtek RTL8192E for Windows7 here

  Always the best choice is to use the drivers from your motherboard, desktop or mobile site.
  Second place should be device site producer.
  Last chance is updated for Windows.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  I'm Swedish in Sweden. And I installed Adobe for a trial period of 30 days. The menus are in Swedish, but when I want to start and then editing the language changes in Finnish, a language completely different to almost all other languages. Help!

  Hello

  This link might help: changing the language setting of your Cloud Creative applications

  Kind regards

  Sheena

• I copied the photo library on external drive, and that one photo now shows despite the file being 70 GB.

  I had a library in iPhoto on an external HARD drive, and it worked. This is a disc plu so I decided to replace it with a new one that doesn't take much space on my desk. I copied the library through an external DRIVE to another drive, and it seemed to work. However, it now shows that a single photo despite being listed in the file manager as containing more than 70 GB.

  I explored a bit further in the file using finder and preview and found many files sorted by date. The photos seem to be all there, but they appear in iPhoto when I switched to this library. Always only one picture appears.

  I decided to convert the copied pictures from iPhoto library and it took a lot of time to convert, but the converted library always display just a single photo in Photos when I switch to this library.

  I could import all of them individually, but it's a big enough job, if there is a way to get libraries to work correctly.

  Any suggestions?

  We need the details - what format is the drive? How is it connected? It serves a TM backup Volume? How you copied the library itself? The library still works fine on the old drive? anything else you can tell us which could help a total strange who don't see you help?

  LN