Best Practices for CF9 Server w/IIS Installation

Similar Questions

• Best practices for HP DL385p G8

  Trying to find documentation for the implementation of a HP DL385p G8 for VMware Server. I would like to find a guide to best practices for this server? Been looking for but not found anything. I would like to find things are should hyperthreading turned on and so on. I use the ESXI from HP image for pilots, that all work but just want to find the settings.

  Thank you

  Hello

  you will find on this blog: BIOS settings in a VMware ESX (i) / vSphere environment. VirtualKenneth & #039; s Blog - hqVirtual | Quality rental a detailed explanation on all the BIOS settings and why you should enable or disable it.

  hope that helps.

• Best practices for vSphere 5 Networking

  Hi all

  Given the following environment:

  (1) 4 physical servers, each server has 16 (Gigabit) network interface cards will install vSphere 5 std.

  (2) 2 switches with SAN storage battery function

  (3) 2 Equallogic PS4000 SAN (two controllers)

  (4) 2 switches for the traffic of the virtual machine

  As for networking, I intend create some vSwitches on each physical server as follows

  1 vSwitch0 - used for iSCSI storage

  6 network adapters are associated with IP-hash, multitracks with iSCSI Storage consolidation policy. and storage load balancing is round Rodin (vmware)

  (vmware suggests to use 2 cards for 1 traget of IP storage, I'm not sure)

  2 vSwitch1 - used for the virtual machine

  6 Teamed network adapters for the traffic of the virtual machine, with the hash intellectual property policy

  3 vSwitch2 - management

  2 network cards are associated

  4 vSwitch3 - vMotion

  2 network cards are associated

  You would like to give me some suggestions?

  Alex, the standard set by the storage and VMware is used by dell for their servers and tested sound on their equipment and the publication of the document, it is recommended...

  This sound is the best practice for dell server with this model mentioned in the document to use.

  Hope that clarifies...

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• What is the best practice for a 'regular' Server VMware and VDI environment?

  What is the best practice for a "regular" VMware Server and VDI environment?   A single environment (ESXi and SAN) can accommodate two if it is a whole new configuration?  Or even better to keep separate?

  Enjoying inputs.

  Quick and dirty answer is that "it depends."

  serioulsy, it depends really two things budget and IO.  If you had the money for two without then buy two and don't have to host your server environment and the other for VDI desktop, their IO profiles are completely different.

  If this is not the case, try to keep each type of use for their own dedicated LUN.

• Measurement on the side time server? Best practices for the turn-based game

  Hello

  What would be the best practice for measuring time in a turn based game?

  I was looking at the timeout of the room, but to use that it would mean that, for each round, I put users in a new room?

  Is there a way where I can measure time serverside and keep users in the same room?

  If so, I could use php, otherwise, we would need java that allows to measure a time race.

  See you soon,.

  G

  Hello

  You can definitely use PHP or Java - we provide integration of server

  libraries for either. I don't know exactly what is the use case, so I can't

  comment on what makes the most sense, but if it is not information which must be

  totally secure, grading on the client can be a viable approach also.

  Nigel

• Best practices Upgrade Path - Server 3 to 5?

  Hello

  I am trying a migration and upgrade of a server in the Profile Manager. I currently run an older mac mini Server 10.9.5 and Server 3 with a vast installation of Profile Manager. I recently successfully migrated the server itself out of the old mac mini on a Xserve end 2009 of cloning the drive. Still of double controls everything, but it seems that the transition between the mini and the Xserve was successful and everything works as it should (just with improved performance).

  My main question is now that I want to get this software-wise at day and pass to the Server 5 and 10.11. I see a lot of documentation (still officially Apple) best practices for the upgrade of the Server 3 to 4 and Yosemite, but can't find much on the Server 5 and El captain, a fortiori from 3 to 5. I understand that I'll probably have to buy.app even once and that's fine... but should I be this staging with 10.9 to 10.10 and Server 4... Make sure that all is well... and the jump off 10.11 and Server 5... Or is it 'safe' (or ok) to jump 3 to 5 Server (and 10.9.5 to 10.11.x)? Obviously, the AppStore is pleased to make the jump from 10.9 to 10.11, but once again, looking for best practices here.

  I will of course ensure that all backups are up-to-date and make another clone just before any which way that take... but I was wondering if someone has made the leap from 3-5... and had things (like the Profile Manager) still work correctly on the other side?

  Thanks for any info and/or management.

  In your post I keep the Mini running Server 3, El Capitan and Server 5 install the Xserve and walk through setting up Server 5 by hand. Things that need to be 'migrated' as Open directory must be handled by exporting the mini and reimport on Xserve.

  According to my experience, OS X Server facilities that were "migrated" always seem to end up with esoteric problems that are difficult to correct, and it's easier to adopt the procedure above that to lose one day try.

  YMMV

  C.

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• Best practices for deferred loading collection once but ensuring there?

  I'm confused on best practices for managing the "setup" of the form, where I need a remote call to occur once only once for the form, but I also need to make use of this collection for a combobox that will change when different lines in the DataGrid or clicked. Easier if I just explain...

  1. You click on a row in a datagrid control to modify an object (for this example we will say it is an "employee")
  2. The form you go must have a collection of objects 'Department' charged by a remote call. This collection of departments should only occur once, since it is not common for them to change. The departments collection is used to fill a combobox in form.
  3. You need to understand what Department of the comboBox control is the property selectedIndex by iterating over the departments and find one that fits the employee.department.id

  Individually, I know how I can do all of the above, but because of the asynchronous nature of Flex, I'm having hard time setting up things. Here are a few questions...

  My first thought was just put the loading of the departments in an init() method on the employeeForm who would load as an event on the form creationComplete(). On the component page grid when the event handler by clicking a line of fire, I then calls the setup() method on my employeeForm which stands at which selectedIndex to set to the combobox control looking at the departments.

  The problem is the resultHandler for the load of the departments could not returned (so departments could not be there when "setUp" is called), but I can't put my business logic to determine the correct combobox in the departmentResultHandler because it would mean that I would always have whenever I don't want the fire of the call to the remote server object.

  I have to miss a single best practice? Suggestions welcome.

  Hi there rickcr

  It is pretty rough and you need to make a few storage upward, but take a look below.

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
          Import mx.controls.Alert;
  Import mx.collections.ArrayCollection;
             
  private var comboData:ArrayCollection;
             
  private void Setup (): void {}
  If {(comboData)
  Alert.Show ("data are present")
  populateForm()
  } else {}
  Alert.Show ("data not '")
  getData();
  }
  }
             
  private void getData (): void {}
  comboData = new ArrayCollection();
  The result of this call, the installer again
  }
             
  private function populateForm (): void {}
  fill out your form
  }
  ]]>
     
     
     
         
         
         
         
     
  

  I think this example type of watch you want.  When you first click on tab 2 there is no data.  When you click on tab 2 once again, there is. The data for your combo will be stored in comboData.  When the component gets created first the comboData is not instansiated, just romance.  This allows you to say

  If (comboData)

  This means that if the variable contains your data, you can fill out the form.  Initially it is not so now the else condition, you can call your data and return the result of your data then you can say

  comboData = new ArrayCollection(), put the data in it and remember the installation again.  This time comboData is populayed and is so it will run the method populate the form and you can decide which selected item to affect.

  If it is on a large scale you want to look into the creation of a suitable handler class to handle this, but this simple demo shows you can test to see if the data is different.

  Hope it helps and gives you some ideas.

  Andrew

• HP stream 11-d008tu: best practices for migrating to Windows 10?

  Hey there, I have a HP flow 11-d0008tu and received the notification I can upgrade to Windows 10. I want to do a clean install with a downloaded ISO but knowledge first of all, it is better to upgrade so that you get the activation done.

  Can someone give me some ideas on best practices for the upgrade? The stream has only 30GB HD so I have no recovery disk, I'll just do a recovery later on USB or SD card. When I do the upgrade can deselect recovery option or delete?

  Also, any other suggestions appreciated, especially which helps make effective for small HD

  See you soon

  Hi, I posted an installation procedure for Windows 10 fresh for the Tablet HP Stream here.  Also, I have a laptop 11 flow but do not have that yet. I think it must be the same because they both the same drive of mem 32 GB Hynix. A change would you probably want to use the 64-bit instead of 32-bit Windows 10 ISO file, the Tablet has only 1 GB of RAM.

• [ADF, JDev12.1.3] Best practices for maintaining a form validation

  Hallo,

  in my application, I need to create a registration form which contains fields that must be validated (for example they should follow a format like e-mail, phone number, tax code,...).

  If the data inserted by the user are ok, a new record in my custom db table Users will be created.

  I would like to know which are the best practices for maintaining the validation, which means the place where the controls must be made and a message to the user who fills out the form when something goes wrong.

  The best vo or EO or managed bean? Or some controls should be put in the OS, others in the VO and other in the managed bean?

  I would be happy if you could give me some examples.

  Thank you

  Federico

  Assuming you want the validation on the value of the field to any screen data can be entered in (and possibly web services that rely on the same BC ADF) then put the validation on the definition of the attribute in the EO.

  If you want to add a little more friendliness and eliminate some of the network traffic to the server, you can also implement the validation client in your page - for example by using the regular expression validator.

  https://blogs.Oracle.com/Shay/entry/regular_expression_validation

• Best practices for building an infrastructure of APEX for 12 c

  Hi all

  Have we not the docs on best practices for building an infrastructure of APEX?

  Which means, for the production, it is acceptable to use Embedded PL as the listener, or we stick with the Listenr tested on Weblogic?

  Thank you

  Hi JCGO,.

  JCGO wrote:

  Hi all

  Have we not the docs on best practices for building an infrastructure of APEX?

  Which means, for the production, it is acceptable to use Embedded PL as the listener, or we stick with the Listenr tested on Weblogic?

  Thank you

  I agree with Scott's response '' it depends. '' It starts with the appropriate choice of a web listening port.

  You should discourage use EPG facility based in Production environments in accordance with the recommendation of the Oracle.

  Reference: See security considerations when you use the Embedded PL/SQL Gateway section.

  ADR (APEX Listener) + Oracle Weblogic Server sounds good, if you already have tried and have appropriate expertise to manage it.

  Also, you might consider what other facilities ADR based ADR + Apache Tomcat with Apache HTTP Server reverse proxy as described here:

  Dimitri Gielis Blog (Oracle Application Express - APEX): Prepare the architecture for the APEX 5.0 upgrade

  But it depends on Apache skills, you have within your organization.

  I hope this helps!

  Kind regards

  Kiran

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

  Hello

  I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

  I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

  (I had this pattern HERE - rights go to Paul Kelly)

  My next question is how much of a traffic load is each object take through the network, percentage wise?

  For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

  I need the percentage of bandwidth, if possible.

  If anyone out there can help me, that would be so awesome.

  Thank you!

  -Erich

  Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

  That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

  Sent from my iPhone

• Best practices for dealing with Exceptions on members of storage

  We recently encountered a problem where one of our DistributedCaches was closing himself and restart due to a RuntimeException is thrown from our code (see below). As usual, it's our own code and we have updated to not throw a RuntimeException in all circumstances.
  
  I would like to know if there are some best practices for Exception handling, other than catching Exceptions and their record. We should always catch the Exceptions and ensure that they do not spread back to code that is running from the pot of consistency? Is it possible to configure consistency so that our DistributedCaches are not completed even when filters custom and other throw RuntimeExceptions?
  
  
  Thank you, Aidan
  
  
  Exception below:
  
  2010-02-09 12:40:39.222/88477.977 Oracle coherence GE < error > 3.4.2/411 (thread = DistributedCache:StyleCache, Member = 48): a (java.lang.RuntimeException) exception occurred reading Message AggregateFilterRequest Type = 31 for Service = DistributedCache {Name = StyleCache, State = (SERVICE_STARTED), LocalStorage = active, PartitionCount = 1021, BackupCount = 1, AssignedPartitions = 201, 204 = BackupPartitions}
  2010-02-09 12:40:39.222/88477.977 Oracle coherence GE < error > 3.4.2/411 (thread = DistributedCache:StyleCache, Member = 48): DistributedCache ending because of an exception not handled: java.lang.RuntimeException

  We have reproduced you problem in the House and it looks like a global filtering does not
  the correct thing (i.e. having caught a processed) when moving from a runtime exception.
  In general runtime exceptions should simply be exploited and returned to the application
  without compromising the cache server, so we will be solving it.