Best practices for handling the elements and symbols (including preloading)

Similar Questions

• Best practices for securing the Oracle e-Business

  Is there anything in addition to best practices for securing the Oracle e-Business
  Suite 11i that consideration for the safety of the Oracle E-Business Suite?

  Try:

  http://repo.solutionbeacon.NET/Collab07BestPracticesWP.PDF

  http://www.Integrigy.com/Oracle-security-blog/archive/2007/07/27/11i-updated-security-best-practices

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• best practices for placing the master image

  Im doing some performances / analysis of load tests for the view and im curious about some best practices for the implementation of the image master VM. the question is asked specifically regarding disk i/o and throughput.

  My understanding is that each linked clone still reads master image. So if that is correct, then it seems that you would like the main image to reside in a data store that is located on the same table as the rest of the warehouses of data than the House related clones (and not some lower performing table). The reason why I ask this question, it is that my performance tests is based on some future SSD products. Obviously, the amount of available space on the SSD is limited, but provides immense quantities of e/s (100 k + and higher). But I want to assure you that if, by putting the master image on a data store that is not on the SSD, I am therefore invalidate the IO performance I want high-end SSD.

  This leads to another question, if all the linked clones read from the master image, which is general practices for the number of clones related to deploy by main image before you start to have problems of IO contention against this single master image?

  Thank you!

  -

  ---

  Omar Torres, VCP

  This isn't really neccissary. Linked clones are not directly related to the image of the mother. When a desktop pool is created and used one or more data stores Parent is copied in each data store, called a replica. From there, each linked clone is attached to the replica of the parent in its local data store. It is a replica of unmanged and offers the best performance because there is a copy in every store of data including linked gradient.

  WP

• best practices for loading the swf file

  Greetings,

  Using CS5 AS2

  I am creating a website in flash (all files are in a directory/folder on SharePoint) and want to make sure that what seems to work well is recommended.

  I have an index.swf with many buttons that will take the user to landing pages/content/other SWFs. On these various buttons, I have the script...

  (release) {loadMovieNum ("name.swf", 0) ;}}                I could also just do {loadMovie ("name.swf", 0) ;} ?}

  Transitions film nicely name.swf and on this page, I have a button that returns the user to the index.swf...

  (release) {loadMovieNum ("index.swf", 0) ;}}   Things back to index.swf nicely and the user can chose to go to a different landing page.

  It seems that I am on the right track, BC., nothing's wrong? but want to check out. I'm following best practices for moving from one swf to another within a Web site?

  Thanks for the help or confirmation!

  You are welcome.

• Registration type of best practices for updating the mapping of cascading for account drop-down list

  1. most bearing the name of choice in parent list values and related lookup has been changed in the main list of the external application, so the same should be updated in CRMOD.
  
  2 to update the value of the list of choices, do we need to DISABLE the existing value and CREATE a new list of selection.
  
  3. are there best practices to avoid the manual pick list Cascading draw for the record type account? because we have about 500 values in list dropdown to map with parent and related list of choice.
  
  Thank you!

  Mahesh, I recommend disabling the existing values and create new ones. This means that the remap manually cascading dropdown lists.

• Best practices for handling logic conditional dialogue/popup in the ADF?

  Here's the scenario:

  I have a page that shows a popup programmatically in a method of bean support. The popup asking the user a yes / no question and subsequent logical path is determined by their response. However, if the popup is visible or not in the first place is conditional. In addition, there is an additional logic in the original method, apart from the logic of popup, that must be met.

  The problem with this is that the ADF seems to spin off the popup in another thread and prevents the execution of logic in the original method at the same time, while you wait for the response from the user. However, the desired effect is that the program stops until the user has answered the question in the context menu.

  I was not able to understand in an elegant way to make this happen. Ideally, I think that the solution is to encapsulate the logic that occurs after the popup is displayed (or not shown) in the original method and call it from the popup action listener if the popup is displayed (if not call it the original method of). However, the logic should be encapsulated requires the use of some local variables that have been put forward for the popup to appear. There is no way to get these values to the popup action listener method to pass them on to the encapsulated logic (aside from the creation of global static variables in the bean, which seems to be a bad solution).

  Another idea I had was to get the logic ' show/do not see the popup' workflow. However, it seems that for every single popup would make the really complicated workflow.

  Is there a 'best practice' recommended to handle this situation? It must be a common problem, and it seems that I will talk all wrong.

  However, the desired effect is that the program stops until the user has answered the question in the context menu.

  This will not happen in any web environment, including ADF.

  You will have different events for each life cycle:

  1 - opening popup: popupFetchListener event

  2 - Click on OK, Cancel buttons: DialogListener event

  3 - Press the Esc button: popupCancelledEvent

  You can share data between these events on pageFlowScope, or viewScope.

  But if you use the ADF BC, you might be better to use transient attributes on the objects in view.

• Request for advice: generally speaking, what is the best practice for managing a paid and a free application?

  Hi all

  I recently finished my first app of cascades, and now I want to inspire of having a more feature rich application that I can then sell for a reasonable price. However, my question is how to manage the code base for both applications. Any have any "best practices", I would like to know your opinion.

  You use a revision control system? This should be a prerequisite...

  How the different versions of the application will be?

  Generally if you have two versions that differ only in terms of having a handful of features disabled in the free version, you must use exactly the same code base. You could even just it for packaging (build command) was the only difference, for example by adding an environment variable in one of them that would be checked at startup to turn paid options.

• Wonder about the difference between the element and symbol with draggable drag

  I'm trying to understand the difference between a symbol and a with draggable element.

  She is the example I did: https://www.box.com/s/v2s8ueeqof9litu4zvwm

  • for the Rectangle element, drag works very well. The item dragged from where he is.
  • the symbol of the box which is initially 0 left and top 0, no problem
  • the symbol of the boxCopy which is placed on the left 100 and top 100, on the trail, he jumps to this amount.

  I guess drag Gets the original position of the symbol on the stage box and add these numbers to the position of the step. I have the symbol arround medication and it seems that the scene is translated left and top of the amount of the left and top of the symbol.

  This does not happen with the Rectangle element.

  Obviously there is something I don't understand.

  Ok. Joel gave me the solution.

  After you have placed your symbols on the stage, remove the left and top lines in the symbol. This will reset to (0,0).

  Here is the corrected file. In the left panel, you will see that there is no left and top except one to show the difference.

  https://www.box.com/s/v2s8ueeqof9litu4zvwm

  

• Best practices for saving the files by sending an e-mail to the media?

  I'm pretty much an impostor of AI. I have Illustrator cs4 (14.0.0) and the way I use it is to combine my creations of iStock vector files and a lot of trial and error. Sometimes my husband throw me a lifeline because he's good with PhotoShop. As a small business owner, I'm dying to find the time to take a course but at the moment I'm just floating around forums and learn what I can. Basically, I plague near the computer and sloooowly design and somewhat mysteriously meets. He becomes faster and is kind of fun, unless I'm stuck.

  This week I had a problem with an ad that I designed printed of the Orchestra of a very small community programs. I send them a pdf file first, and when they see it on their screens using inDesign, they see the whole picture, but when it printed he omitted an element (a sunburst in the background). They thought that it had something to do with this element being in color rather than the gray levels (even if there are other items that have survived, and they were the exact color even though I was skeptical). I sent a file of grayscale, no luck. I emailed the file, but who apparently 'crushed' their iD and now they believe I sent a corrupted file. They are not very good in adobe, either.

  I designed and sent no less than 9 other ads to other print media and online organizations this year and never had a problem. The file seems perfect for me in all versions I have open/upload/email me.

  You can see it here if you like: http://www.Scribd.com/doc/27776704/RCMA-for-CSO-greyscale

  So here are my questions:

  1. How DO I save something like that? Is the mark of a rookie-pdf?

  2 should. what parameters I look for when/before save? I read on the overlay, for example and tried with one of the versions I sent them without success. I don't really know which is the case, while I was trying just a Hail Mary here anyway.

  Thanks for your time!

  PDF is the way modern sending files, but what you can do is in this case select the art in question and go to object > flatten transparency

  Then save it as a pdf or as a file when the file sending their zip it if they have computers based on windows or stuffit if they have Mac zip actually is good for both.

  It is best to send it in the form of a then archive as a file.

• Best practices for call code plsql and methods of application module

  In my application I am experience problems with the connection pool, I seem to use a lot of connections in my application when only a few users are using the system. As part of our application, we need to call procedures of database for the business logic.
  Our support beans, calls the methods of the module of the application calling to turn a database procedure. For example, in the bean to support, we have code as follows to call the method of module of the application.
  
  Component Module to generate new review/test.
  CIGAppModuleImpl appMod = (CIGAppModuleImpl) Configuration.createRootApplicationModule ("ky.gov.exam.model.CIGAppModule", "CIGAppModuleLocal");
  String testId = appMod.createTest (username, examId, centerId) m:System.NET.SocketAddress.ToString ();
  
  AdfFacesContext.getCurrentInstance () .getPageFlowScope () .put ("tid", testId);
  
  Close call
  System.out.println ("delete Calling releaseRootApplicationModule");
  Configuration.releaseRootApplicationModule (appMod, true);
  System.out.println ("Completed releaseRootApplicationModule delete");
  Return returnResult;
  
  In the method of application module, we have the following code.
  
  System.out.println ("CIGAppModuleImpl: call the database and use the value of the iterator");
  CallableStatement cs = null;
  try {}
  CS = getDBTransaction () .createCallableStatement ("start?: = macilap.user_admin.new_test_init(?,?,?);") end; ", 0) ;
  cs.registerOutParameter (1, Types.NUMERIC);
  cs.setString (2, p_userId);
  cs.setString (3, p_examId);
  cs.setString (4, p_centerId);
  cs.executeUpdate ();
  returnResult = cs.getInt (1);
  System.out.println ("CIGAppModuleImpl.createTest: return result is" + returnResult);
  
  } catch (SQLException to) {}
  throw new Aexception.getLocalizedMessage (se);
  }
  {Finally
  If (cs! = null) {}
  try {}
  CS. Close();
  }
  catch (SQLException s) {}
  throw new Aexception.getLocalizedMessage (s);
  }
  }
  }
  
  I read in one of the presentations of Steve Muench (Oracle Fusion Applications Team' best practices) that the call of the method createRootApplicationModule is a bad idea and call the method via the link interface.
  I guess that the call of the createRootApplicationModule uses a lot more resources and connections to database as the call to the method via the link interface such as
  
  BindingContainer links = getBindings();
  OperationBinding ob = bindings.getOperationBinding("customMethod");
  Object result = ob.execute)
  
  Is this the case? Also use getDBTransaction () .createCallableStatement the best average of calls to database procedures. Would it not be better to expose plsql packages such as Web services and then call from the applicationModule. Is it more effective?
  
  Concerning
  
  Orlando

  He must show them.
  But to work around the problem, try this - drag method of the data control to your page and the fall as a button.
  Then go to the source of the JSPX view and remove the button from there - if it comes to the display of the source - the link must remain in your pagedef.

• Best practices for storing the material ID

  Hey,.

  I would ask for some suggestions on my problem:

  I have a system in which I use USB-6211 on several computers and it could happen that more than one of them is connected to a single computer, but at the same time as one is used on a computer. I found a way to read the serial number and I can assign this number to a name. However at the time of the design that I don't know the serial numbers, then what would be the best to store?

  I think of a way to store these values somewhere, read it, control devices, if there is no entry, then ask a name store, if found, return the name and get the dev unit identifier selected.  The actual data format is not really serious, it can be a simple table, a list of attributes varying or something else, because a computer no longer of ~ 10 devices listed. The real problem is the place to store them without danger.

  Some users may have administrator rights, then most of them certainly don't have Windows XP, 7, 8 and 10 installed (something I can't really control).

  Thank you

  I was going to recommend an INI file also.

  When you say 'safe' do you mean that there is no permission issues worry?  Or that the users cannot edit it?

  I prefer to use the feature "Get-system directory.

  

  If you look at the entrance to 'Help' to get the system directory, it shows what permissions and accessibity you can expect any given directory.

  'C:\ProgramData\' is a directory hidden by default and I have found that trying to tell other users how to find a hidden directory to be more harm than what it was worth.

• charge battery for the first time and the best practices for maintaining the life of the new PC laptop battery

  Received my first laptop as a gift today (Pavilion touchsmart 15-n287cl).  You need to know 1.  How long to charge it for the first time or first several times; 2 do you need to unload and reload between each use completely and how long should it take to charge an average before being used again.  3. Since no instructions is a good idea to leave it plugged when you use all the time or the battery should be removed to improve the conservation of life?

  Thank you in advance, it has taken a lot of time to migrate from the desktop.  Want it to be a positive experience.

  Hello

  Modern batteries and chargers are now smarter than you.

  1. you can plugin and immediately to use the machine, the machine will stop charge when the battery is fully charged.

  2. No, we don't need to unload completely between uses, then as above. The recommendation is sometimes we run machine on battery until that up to 10%.

  3. when using AC is a way to protect the unit during the failure of current, all of a sudden, leaving battery on laptop.

  Please read the following article:

  http://BatteryUniversity.com/learn/article/how_to_prolong_lithium_based_batteries

  Kind regards.

• Show(); -> Differences between the element and symbol?

  Hello

  I can't ged rid of a problem of confusion.

  I have a symbol (mySym) on my scene. the initial state is hidden.

  If I give the word:

  SYM.$('mySym'). Show();

  nothing happens. If I do the same spirit a component on the stage:

  SYM.$('myElement'). Show();

  It works well. If I use

  sym.getSymbol)

  This is the same behavior. Are there differences between a symbol and an element?

  I didn't? Or?

  Thanks for the help,

  Michael

  Solved the Riddle by myself. I'll leave the answer to others:

  There is no difference! It worked fine, but I have an animation in my symbol and triggered incorrectly.

  I tried with:

  SYM.$('mySym'). Play();

  and it has not worked for play();

  I have to use:

  sym.getSymbol('mySym').play ();

  to trigger the chronology. Now, everything's fine.

  Thanks to myself for the answer. ;-)

  And thanks to this forum which has answered a lot of Questions yet.

  Cheers - M.

• Best practices for deferred loading collection once but ensuring there?

  I'm confused on best practices for managing the "setup" of the form, where I need a remote call to occur once only once for the form, but I also need to make use of this collection for a combobox that will change when different lines in the DataGrid or clicked. Easier if I just explain...

  1. You click on a row in a datagrid control to modify an object (for this example we will say it is an "employee")
  2. The form you go must have a collection of objects 'Department' charged by a remote call. This collection of departments should only occur once, since it is not common for them to change. The departments collection is used to fill a combobox in form.
  3. You need to understand what Department of the comboBox control is the property selectedIndex by iterating over the departments and find one that fits the employee.department.id

  Individually, I know how I can do all of the above, but because of the asynchronous nature of Flex, I'm having hard time setting up things. Here are a few questions...

  My first thought was just put the loading of the departments in an init() method on the employeeForm who would load as an event on the form creationComplete(). On the component page grid when the event handler by clicking a line of fire, I then calls the setup() method on my employeeForm which stands at which selectedIndex to set to the combobox control looking at the departments.

  The problem is the resultHandler for the load of the departments could not returned (so departments could not be there when "setUp" is called), but I can't put my business logic to determine the correct combobox in the departmentResultHandler because it would mean that I would always have whenever I don't want the fire of the call to the remote server object.

  I have to miss a single best practice? Suggestions welcome.

  Hi there rickcr

  It is pretty rough and you need to make a few storage upward, but take a look below.

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
          Import mx.controls.Alert;
  Import mx.collections.ArrayCollection;
             
  private var comboData:ArrayCollection;
             
  private void Setup (): void {}
  If {(comboData)
  Alert.Show ("data are present")
  populateForm()
  } else {}
  Alert.Show ("data not '")
  getData();
  }
  }
             
  private void getData (): void {}
  comboData = new ArrayCollection();
  The result of this call, the installer again
  }
             
  private function populateForm (): void {}
  fill out your form
  }
  ]]>
     
     
     
         
         
         
         
     
  

  I think this example type of watch you want.  When you first click on tab 2 there is no data.  When you click on tab 2 once again, there is. The data for your combo will be stored in comboData.  When the component gets created first the comboData is not instansiated, just romance.  This allows you to say

  If (comboData)

  This means that if the variable contains your data, you can fill out the form.  Initially it is not so now the else condition, you can call your data and return the result of your data then you can say

  comboData = new ArrayCollection(), put the data in it and remember the installation again.  This time comboData is populayed and is so it will run the method populate the form and you can decide which selected item to affect.

  If it is on a large scale you want to look into the creation of a suitable handler class to handle this, but this simple demo shows you can test to see if the data is different.

  Hope it helps and gives you some ideas.

  Andrew