best type of measure daqmx for several closed loop control system

Similar Questions

• What is the best configuration of RAID practice for ESX 3.5 operating system

  Hi all.

  Recently, we encountered a problem.  After the failure of one of the hard drives in RAID 1, all file systems have passed in read-only mode. This table is used only for ESX 3.5 OS. Someone knows how to avoid similar problems in the future? Wich (1, 1 + 0, 5) RAID configuration is optimal for the ESX 3.5 Server?

  Other debates are: http://communities.vmware.com/message/1264678

  But I think you know very well

• Creating a control simple closed loop

  Hello world

  I need a little help to create a (very) simple closed loop control.

  Note: I use 3 boards of Measurement Computing: a USB-2416 and two USB - TC. Measurement Computing with their own driver (called ULx), it might be a little harder to understand than the drivers NOR, but keep in mind ULx is the equivalent of DAQmx.

  I need to be out in a binary value 0 or 1 based on measures of input voltage compared to the constants of 4 channels. That is to say. If the measure of tension< 3.5="" (constant),="" send="" a="" boolean="" value="" (see="" a,="" b,="" c,="" d="" in="" attached="" photo)="" which="" in="" turn="" gets="" sent="" to="" the="" ulx="" write="" vi,="" and="" that="" outputs="" the="" binary="" value="" of="" 0="" or="" 1.="" the="" problem="" i've="" run="" into="" is="" that="" i="" need="" to="" "compare"="" single="" chanels="" from="" different="" boards,="" which="" gives="" me="" single="" boolean="" values="" for="" each="" channel.="" the="" ulx="" write="" vi="" only="" accepts="" boolean="" arrays.="" is="" there="" a="" way="" (and="" there="" probably="" is,="" i="" just="" haven't="" been="" able="" to="" find="" it)="" of="" arranging="" these="" lone="" boolean="" values="" into="" a="" boolean="">

  (see attachment for what I have so far)

  PS. I'm a COMPLETE beginner, only used LV for a week or two, so please explain everything as if I have no idea what's going on.

  Thanks in advance!

  Hello

  the attached example I did should demonstrate what you need to do.

  A few things to think about:

  1. it seems that the vis ULx return tables of signals. If so, you can select signals with the "index Board" as done in my example. Which consumes less space and does not change the type of the variant signals.

  2. If we compare the signals to your constants you will receive Boolean tables because each element of the measured signal is compared to the constant (see my example). You can then decide how to deal with this info - an another Hooray for signals :-)

  Concerning

  Florian

• I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?

  I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?

  Follow the instructions in this article to support that best apply to your situation:

  iOS: device disabled

  Good luck

  GB

• Best way to generate the software clock for USB-6501 of Measurement Studio for c# VS2008

  Hi all

  I wonder if there is a better way to generate a clock software for USB-6501 of Measurement Studio for VS2008 in C Sharp?

  I have developed a clock using C Sharp "Thread.Sleep (msecPauseTime)"; and statements to switch digital output high and low. There are a few things I noticed in creating a software clock in this way:

  1. The smallest delay by the Thread.Sleep command time is 1 millisecond (which means higher clock period is 2 msec-500 Hz, not holding not ball account no. 2 below).
  2. Sometimes the delay I see on an oscilloscope is considerably longer than the delay that I specified in the sleep command.

  In my application, I create signals (a clock, a latch enable and data series) to control what an attenuator step through the USB-6501 RF connected to a USB 2.0 on my computer. This particular step RF attenuator can accept clocks with frequencies up to 10 MHz, so I would like to generate a software clock (without having to connect to an external clock to a line of input on the USB-6501) which is closest to this maximum frequency, and I think that the USB2.0 line could handle clock speeds over 500 Hz. Also, I would like to know why the delays that I see on the scope are sometimes longer than the time specified by the Thread.Sleep command. Is it caused by the suspension of the execution of my program processor for something else, as I suspect? Of course, this isn't a big deal, because it does not affect the time as my serial data and pieces change compared to my clock. However, I would like to know why it does this.

  I appreciate your help.

  Thank you

  Jonathan Becker

  Doctoral research engineer

  Carnegie Mellon Silicon Valley

  Jonathan,

  Since the USB-6501 DIO is software programmed, you are at the mercy of the planning of the operating system and won't be able to work reliably with an external clock in the software.

  You can try to set the priority of your thread 'generation of clock' to improve performance, however, because Windows is not a deterministic operating system, there are still no guarantees.  Operating systems are not required to honor the priority of threads.  You can find examples and information on the definition of the priorities of the threads in c# here:

  http://msdn.Microsoft.com/en-us/library/system.Threading.thread.priority.aspx

  Kind regards

• configure several types of measure

  I use LabVIEW 2008 and a data acquisition system Agilent 34970 A.

  I need to read the voltage of 3 channels and temperature of more than 2.

  I know how to set each of them separately using a CONFIGURATION command to the top, and I was wondering if there is any way to configure two types of measures in a single command.

  If there is an easier way to do the total that would be awesome. I'm still very new to LabVIEW.

  Thanks in advance and let me know if you need more information,

  Kat

  Nevermind figured it out.

• Best way to measure accurately the activity of hiking on Apple Watch

  I use my Apple Watch with watch OS 2.2.2 paired with an iPhone on ios 9.3.3 6 and ask what is the best way to measure the calories during the hike. I currently use the app to drive and walk outdoor activity type, but it seems that the market with more than 30 pounds on the back should burn more calories than the market alone.

  It would make sense to increase my weight of 30 pounds (or whatever the weight of the package is that day) in community health for the market or is there another solution to workaround that would suffice?

  It would be great if a later version of workout app had a hiking activity or hiking with a place to specify the amount of extra weight in a pack or vest or even just an option for additional weight to the open-air market.

  Thank you!

  tcpsoft wrote:

  It would be great if a later version of workout app had a hiking activity or hiking with a place to specify the amount of extra weight in a pack or vest or even just an option for additional weight to the open-air market.

  If you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

  (You do not speak to Apple here - it is a community based on the user).

• Costume measurement OR for Mobile/Fixed WiMAX 1.0, is there any optiion to activate PUSC or AMC for the generated signal?

  Hello.

  I use a VST OR to generate the WiMAX signal. I installed NO measure costume for Mobile/Fixed WiMAX 1.0 on the calculation. But I can't find any option on the front panel of the combination of the generation to enable AMC or PUSC for generated signal. This feature exist at all?

  Thank you.

  Hello sam2013ni,

  That's all I see for AMC and PUSC. Look in "box Type".

  

  

  Best regards

• Measurement Studio for visual studio 2008 8.1.2

  Hello, I installed Visual Studio 2008 and I use the Visual C++ 2008 him.  However, Measurement Studio 8.1.2 (which I have) do not natively connect to VC 2008.  I tried to manually add the box controls to tools... but namespace NationalInstruments.UI.WindowsForms seems not to be there?  Maybe I need to change something somewhere?  Any help would be most appreciated.

  Defiance-

  If I understand correctly, you are trying to add references to assemblies .NET Measurement Studio for a C++ 2008 project. Is this correct?

  In this case, when you have created your project, you chose one of the models in the CLR (see screenshot) category?

  If so, then to add references to assemblies Measurement Studio, you go into the Visual Studio point Project menu > properties and select common properties > structure and references > add a new reference. MStudio 8.1.2 assemblies should appear in the list. If this isn't the case, you can navigate to them. They have installed by default on \Program Files\National Instruments\MeasurementStudioVS2005\DotNET\Assemblies\Current. Make sure that you add all required dependent assemblies (usually NationalInstruments.UI.dll and NationalInstruments.Common.dll).

  Also, you should be able to create a box Tools tab and add controls.

  If you try to do something else, could you give more details on exactly the type of project you want to create?

  David Rohacek

  National Instruments

• Data storage of the optical spectrum for several points and recalling a specific

  Hi, I'm working on an installation of measurement of the optical spectrum automated for a summer project, I have been using labview for about a week now and have had bases for stage motor control, but I have problems with the data management...

  I'm looking to store data such as those acquired with an optical spectrum for several XY points Analyzer and recall the optical spectrum for a specified point? Currently, I am looking at writing to the file of measure and reading of the measures such as the options file, but I'm not sure how to name each piece and the data and to recall them correctly. Are there examples where this has been done? any help will be greatly appreciated.

  I use a connect Yokogawa AQ6370 via ethernet, LabVIEW drivers are provided for this, but I can't find the screws provided here is

  Thank you very much

  Asiri

  Not clear? Ask at your

• Code 31 for several drivers.

  Original title: I get code 31 for several drivers

  I get code 31 on several drivers, including V9 drivers and when I troubleshoot it shows each issue with the driver separately and gives the possibility to fix it by reinstalling. It does not work.  When you try to update I get the message that I have updates. I've also not receive my updates until I ran C Cleaner, that allow to download updates, but this does not solve the drivers with the code 31.

  It is the superior of the pilots numbered if this is useful (e.g. 103/273 etc..).

  Y at - it a fix for this problem. I have seen those already mentioned.

  Tommy

  Hello

  Thanks for the update on the question, I apologize for the delay in response.

  The Windows updates fail to install? Please provide the number of KB.

  Also, follow the steps below:

  Step 1: Run the Troubleshooting Windows Automatic Update tool.

  Troubleshoot Microsoft Windows Update

  Step 2: Check out the link and follow the troubleshooting methods to resolve the problem:

  You can also view: the problems with installing updates

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• How to measure the speed of the funnel without the closed loop of the report?

  We seem to be in trouble, we want to move to 10 Eloqua and/or get the closed loop, tool of reporting, but we have to wait. However, we still really need to be able to measure our funnel and speed into the funnel. So did he do this without the help of eloqua fancy reporting tools?

  To calculate the speed you need two things:

  (1) steps defined

  (2) a date stamp for each step, you're trying to follow a long time.

  I've seen customers calculate the funnel using their CRM speed by writing a date to a field on the contact record and then report on these dates.  For global directional numbers I've seen customer on created lead report / month, then had a date on the contact record to identify SAL in a period of time, following by pointing out the standard option.  This is not one to one, but can provide valuable guidance.  To be precise and complete the picture, you would need MQL dates and SAL on the contact record, and your opportunity process will need to have associated contacts.

  On the product side, income Suite is available on E9.  No need to wait.

• Constant, failure to update, tried for several hours technical support help, recommended full could not uninstall and reinstall, install now freezes at 74%

  No, I'm really lost and I don't know what else to do and I'm not anxious to be on technical support for several hours again.

  My problem was originally that the hotfix update released last November failed to install. I ask on the forum for help, I got some good suggestions but nothing worked. Since Photoshop still worked I've just postponed the issue.

  Several months later, I decided to try everything I can to get the update to work. Created another Admin removed tried Photoshop by reinstalling. Still no. Tried several different things that do not work.

  I finally got with technical support, I allow access to my computer. They spent several hours uninstalling and reinstalling and not as I did. They did get more advances but after almost 4 hours, I was tired of looking at Photoshop do not settle.

  They said they have done all the troubleshooting that they could, and that the best option was to simply uninstall all Adobe and then reinstall it.

  I did tonight. Following the instructions here are using the Adobe Creative Cloud cleaning tool to solve installation problems

  Now I'm stuck with freezing to 74% on installation of Photoshop. Further research led me to this Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Unfortunately, at the start of the installation, it cannot connect to the internet. I know that my connection is working because I can watch sites Web, but stops install on it. I try connecting later button and he asks a serial Code. I have CC so I is not a serial Code and may not try to generate a.

  If Photoshop used to work but not to update. Now it doesn't work at all.

  I'm desperate, I need help to solve this problem. Suggestions, ideas about why this is happening and what I can do to work around it? My number is 0187559333

  Finally managed to do work. I also tried the update and it worked also. It's been a long day.

  On the downloaded installation, there is an option to install a trial version or install a licensed version. The property stored fault due to the weird internet connection being found and the absence of an activation code. But the installation of the trial worked. Has exceeded the dreaded 74% and kept things.

  The end of installation, I opened creative cloud and looked at the applications tab. The update appeared later. I clicked top and too installed completely.

  Now I just hope the trial realizes that I have a legitimate CC account and that it does not lock me in the coming days.

• What are the different types of tools available for the siebel file cleaning

  Hi all
  
  Please let me know what are the different types of tools available for siebel file system cleaning.
  
  Thanks in advance
  Remy

  assuming that you have installed the Siebel server under d:\D:\dba81

  CD D:\sba81\siebsrvr\bin

  (1) mode considered
  sfscleanup.exe/u SIEBEL-USER /p /C SIEBEL-word of PAST SIEBEL-DATA-SOURCE /d SIEBEL-OWNER of the TABLE/f SIEBEL-LEADER-SYSTEM/m SIEBEL-FILE-SYSTEM-FOR-INCORRECT_FILES/r Y/x 'D:\sba81\siebsrvr\log\sfscleanup_report.log '.

  (2) actual performance
  Replace/r Y, N/r

  Best regards
  EvtLogLvl

• I tried for several days to install watchos3 without success.

  I have an Iphone 6 more ios10 running and a 42 mm apple watchos2 sport watch running (2.2.2).

  I tried for several days to install watchos3 without success.

  I have so far:

  Restarted my iphone and restarted my Apple Watch and tried again

  Removed the download of the update of the software > its use on the Apple Watch app and tried

  I reset all the settings on my watch and re-paired and tried

  The question is after the download on the screen of the software update is about 2 days left, he never moves forward.

  Still me have running overnight (twice) and ensuring that they are close to each other and connected.

  Any ideas what to do next?

  < re-titled by host >

  Hello

  Check that your iPhone is connected to the Wi - Fi (rather than the cellular data) and that you follow all the other steps here:

  Update the software on your Apple Watch - Apple Support