Similar Questions

• Why do I get error 200524 for the generating function 2 code example?

  I get the following error message:

  Error-200524 occurred at the generating function 2 channel_lv86.vi

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of channels of task: 1
  Number of data channels : 2

  Task name: _unnamedTask

  When I downloaded and ran the 2 channel here code: https://decibel.ni.com/content/docs/DOC-3545

  I have a card pci-e DAQ 6259 and a block BNC-2110

  Why I get this error?

  When I open the VI I selected ' Dev1/ao"under physical channels. I tried all the other options (a0 - a3) which gave the same error message.

  If you have 2 channels in your data (as indicated in the error message), then you must choose 2 channels in your task control (the error message says that you have selected only 1.)

  You saw in the example how they were able to identify the 2 channels of analog output?

• [XNET] [CVI2013] Search for the periodic signal CAN

  Hello

  I use CVI 2013 and the toolkit NOR automobile 1.1 command the diagnostic value.

  OR PXI-8513 to edge (2 CAN bus)

  I want to know how to check if a periodic signal is currently subject to be sent?

  Best regards

  Blue

  I couldn't find an example of CVI that illustrates the use of the nxGetProperty function to get the calendar type and pass the time of a framework. If I have time Monday I'll try to create a.

  In the meantime, I can provide a quick snippet of LabVIEW to illustrate the general idea of how to get these properties of a session reference:

  

• How do you create watermarks for the generated help files

  Is there a way to fill data from a window of web help with a watermark? I am trying to place one in the lower right section of the window, but have been unsuccessful so far. Any ideas?

  Hi Moosegolfr

  Yes, you can do so by specifying the image watermark in your stylesheet. Click Format > Styles... > select text (body) + context > modify... button > button Format > borders and shading... > tab frame > Browse to the image you want and set the options according to the needs.

  I hope this helps... Rick

• Sampling rate higher for the measurement of precision meter

  I have a BNC 6259 M Series DAQ USB. I am currently using the DAQ Assistant to perform simple cash rising measured with the measuring mode single sample on request. I tested my VI with a known square wave with a function generator signal and it clearly lacks a few edges. I think that the solution lies in faster sampling. However, I was not able to understand how to use clocks to set up continuous sampling mode. I tried the forums and I found articles that were close, but not quite exactly the problem I am facing with as (http://forums.ni.com/t5/Digital-I-O/trying-to-use-NI-6251-s-DIO-port-as-input-and-output/m-p/448035#...) or (http://forums.ni.com/t5/Multifunction-DAQ/Using-Counter-of-PCI-6024E-with-Quadrature-Encoder/m-p/984...). Any guidance here would be great.

  In fact, the calendar should not have anything to do with the edges being detected.  Configuration of a sample clock for a county of just edge task allows you to enjoy deterministically in the account register and has no impact on the edges which can be counted.  Also, the analog examples really have nothing to do with what you seem to be asking questions on.

  ... So it leaves the question unanswered as to why you might miss the edges.  Perhaps the following information could shed some light on the question:

  1. it is possible that you do not configure the counter exactly as you think you are.  Can you post the VI you use?  As a point of reference, count digital events shipping example does not use any clock sample timing and just questioned the value of the register count with a software loop, but the meter should not miss all this edge on the input source.  There are examples that are timed by the material available as well, but this is not necessary, unless you need a constant specified dt between your counter samples.  To use the examples of the timed sample, you will need to generate a clock of either another subsystem on the map or use an external clock.

  2. assuming that the configuration of the counter is not the issue, there may be a problem with the method that you use to determine if you are away from the edges.  How do you know that you are away from the edges?  The function generator produces only a finite pulse amount?  You start the meter before start out impulses?

  3. If the two points above do not raise red flags, it seems likely that the meter is registered just not some of the impulses of your FGEN.  Can I assume that the output of the FGEN is 0 - 5V TTL?  What is its frequency and duty cycle?  The maximum external source for the meter on the M-series products: DAQ (like the 6259) is specced at 20 MHz, but this depends on a clean signal with good connections.  At frequencies above it, the bandwidth of the front-end of the PFI lines becomes limiting.  If you have an available specification document for your FGEN I'd like to be able to see it.

  I hope this gets you throw on the right track to solve the problem - impatience comes back with more information.

  Best regards

• Need help finding a specific part for the predator

  I am looking for the metal clip that holds the 2280 m2 card into the top slot (for the 22110 m.2).  There must be somewhere, I don't know where.  Its killing me.

  

  Ok.  I'm not doubting you, but the only thing that I have to go is the official specification.  I don't have your computer model and I don't have an ssd M.2 22110 to see if it would fix it properly.

  In any case...

  Here is the official specification for G9_791 and G9_792 and B21

  

  

• Is it save to use the digital output as a digital input for another channel signal

  Hi all

  I know it's a stupid question, but I don't have another generator of signals by hand. What I want to know is, can I use the signal digital output of my USB-6001 as an input for the same signal device, but on other digital port? I wasn't directly because I don't want to burn the device...

  Thank you

  Done all the time. No problems.

• Oscilloscope for the acquisition of data from the usb-6009 or - example of temporal division for 5 seconds, 10 seconds

  Hey Hey everyone

  I was looking for an example for two-channel oscilloscope virtual using e/s all-in-one of the 14 bits of NI DAQ USB 6009. I tried to research for example BOF time division or s/div for 1 second, 5 seconds, 10 seconds.  but was shocked to find that there is no reference for it. The range of oscilloscoper virtual

  Minimum - 10 micro s / div maximum -10milli second div but there is no example for 1 second / div or 5 seconds / div...  If anyone can guide me. I'm new to labview environment.

  This is the oscilloscope two sample obtained from google search. is there material limitations. ?

  I'm working on continuous 4-channel data acquisition data acquisition using niusb 6009

  The sampling frequency is sufficient for any desired s/div. The sample rate is 12 ksamples / s per channel, so if that meets the Nyquist criteria for the input signal, you can capture it. The number of samples has no effect on that with the exception of the amount of the signal you acquire. Your chart is not stable, if you do not trigger the acquisition. Even as real significance, therefore your emulation seems actually successful.

• Change the matte color to jpg for the image assets

  Is there a way to change the matte color of white for the generated images jpeg?

  Photoshop can save jpeg files in the folder you are working on.  Photoshop is not a file editor.  You can change the image, you work on the appearance in many ways.

  If you open a JPEG with Photoshop it open like a background image layer.  The background layer, Photoshop does not support transparency.  If you add the canvas, you can add any color you want from the Web. There is no separation between an object in the background layer and the area around this object that is a unique raster layer.

• graphic display of performance for the week or the last month?

  Using a VSphere Client 4.1.0 to display an ESX 4.1.0 Server, I am looking at the graph of the performance of the processor (for example).

  When I go into "Options", what I see under CPU options is 'real time' and 'last day '.  Below, time go specifications ('last n periods' and ' a + for ' are all gray.)

  Is there any where that I can set collection or the length to collect & graph interval a longer history, such as week or the last month?

  Thanks for the tips... Lyle

  something greater than what you can buy vmware vcenter.

• Its microphone is not heard when you place a PC-to-PC or mobile / fixed call

  • Dear Experts.
  • I use Dell Inspiron 1525 model with Microsoft Vista operating system...
  • When I connect my headphone + microphone to my laptop and if I try to use the calls from pc to pc or pc to mobile / fixed phone call, the person on the other side does not correctly receive my voice.
  • For them, my voice will appear as female (strange voice).
  • On l ' other I can hear them properly without any problem.
  • I tried to fix this problem through various options in the Control Panel, but always without success.
  • Kindly advice on that.

  Hello

  Check with Dell, their documentation technical support online and drivers, as well as the well-known Dell forums
  questions. Maybe you need a new mic and the issue could be on the other side, unless it happens with
  several others. Check with Skype or other software you use.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  -----------------------------------------------------------------------------------------------------------------

  Try this:

  Click on an icon of right speaker near right lower clock - recording devices

  Select tab improvements - properties (right same low page) - MIC check Disable all sounds effect apply - OK

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• JQuery Mobile fixed foot bar disappears when the orientation changes

  I develop mobile applications using JQuery Mobile, in the home page which is the home page, everything is fine but when you go to the next page and change of ths foot disapers completely orientation, but the code that I use for all pages are the same

  Here is the code that I use for the foooter

  Help, please

  regarding

  Thanks for answer, I have the problem solved,

  I just added

  data-position = "fixed".

  and it solved the problem

  so now the correct code is

  

• Photoshop Mobile App for the Samsung NotePro 12.2

  I recently bought the Samsung 12.2 NotePro.  I'm happy to make my Compositions of creative pictures on this camera anywhere I want / need to.  However, I noticed that the Photoshop Touch App is no longer available.  AND the Photoshop Mix app seems to be incompatible with my camera Samsung NotePro.  What Mobile App replaces the Touch PS? and when and where do I get this app for the Samsung NotePro?

  Thank you

  James

  Hi James,

  Thank you for your patience, I apologize for my late reply. Unfortunately, the touch PS is therefore more available for download. Read more here: Adobe Photoshop remove Touch on Google Play Store may 28 .

  Mix and Fix as Express Photoshop can serve at the same time to create projects similar to PS touch. Unfortunately once again, Mix and Fix are not yet available for Android tablets. Please stay tuned, the teams are actively working on bringing them to the Android tablets.

  I'm sorry to be the bearer of bad news. I would like to know if I can help with anything else.

  See you soon!

  -Kathleen

• For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

  For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

  Tried to 'fix this folder' and ALL - lost ALL the Inbox.

  The file is still there and works well...

  How can I stop it and what are the causes?

  Thank you all, Gabe

  If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

• my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  HOPE TO HEAR SOME ADVICE PLEASE :)

  1) go in your user library folder (~ / library). Hold down the option/alt key while accessing the menu Finder go.

  2) go to the calendar folder

  (3) delete all files that say "cache" (replace the your desktop in the case where you want to move them at least)

  (4) always in the user library folder, go to the Preferences folder

  (5) delete the com.apple.calendar.plist (on the desktop again)

  (6) restart your computer