Best VPN debugging commands?
Hello
I was wondering what your best VPN debugging commands are on an ASA or the router about the phase 1 and 2 and the ACL?
For example I have a site-to-site between 2 ASAs and phase 1 and 2 are on the rise, but each site cannot ping a PC on each site. I'm looking to NAT and ACLs for the moment, but all useful commands would be most appreciated.
Thank you
Two 1 go - to orders are:
ISAKMP crypto to show his
Crypto ipsec to show his
If the Phase 1 and Phase 2 are not upward by these respective commands, then go to:
Debug crypto isakmp 7
Debug crypto ipsec 7
You may need to increase the verbosity level (255 is the highest) and, if you have multiple SAs, focusing on those that you are interested in with a filter:
Debug crypto peer condition
Once you have Phase 1 and 2 but established that you are experiencing persistent problems with two-way traffic flow, look at two things: 1. at the exit of his see the crypto ipsec, decaps proportional increase with the program. If this is not the case, the remote line can't get the return traffic. Confirm with a capture of packets and/or track. 2. use the command packet - trace (CLI or GUI) on the SAA to review how it will handle a given stream. NAT and ACLs questions often are quickly visible using this tool.
Tags: Cisco Security
Similar Questions
-
What is the best vpn for OS 10
What is the best VPN for my MacBook Pro running Yosemite
The question is really not much sense.
A VPN is not something that you install on a computer. It's a service that you connect to, as such, there is no better for a specific type of computer.
What exactly you need to accomplish with a VPN?
Usually, a VPN is used to connect to a remote network and use its resources, such as printers and servers, as if you were connected locally to them.
-
Hey guys, I was just wondering that the recommended practice is for execution of debugs a live firewall, with lets say about 8 VPN site to site, and access remote vpn ispec?
I just wanted to know the best way to run a debugging, for example, for a specific vpn tunnel if possible.
I understand the basic display commands and debugs, everything just not how to tune properly for your ASA falls do not down.
Hello!
The commandos are:
Debug crypto peer xxxx.xxxx.xxxx.xxxx condition
Debug crypto 127 ikev1
Debug crypto ipsec 127HTH
Portu
Sent by Cisco Support technique Android app
-
Hi we have problems with a client that connects to our Cisco via EasyVPN 2800. I would like to know the exactly effective way to debug and resolve problems and the tunnel to the EasyVPN. Thank you.
No, you cannot filter debugging.
However, if you have problems with 1 single connection, only this one should be in debugging.
The work of VPN will give little or no debugging messages (only to generate a new key or termination).
Please rate if this helped.
Kind regards
Daniel
-
3925, IPsec LAN - LAN VPN tunnel command unavailable
Hello
I am looking to use one of my 3925 to create a VPN IPsec LAN - LAN tunnel with another site.
I was under the impression that I needed to get a license of securityk9 installed and then I was good to go. I got a temporary license for 60 days and it is installed, but none of the commands I need to create the tunnel are appearing for me.
I am using the command "crypto isakmp", but which does not appear:
Router (config) #crypto?
CA Certification Authority
main activities key long-term
public key PKI componentsHere's my license to show:
Function index 2: securityk9
Time left: 633 weeks 4 days
Period of opportunity: 0 minute 0 second
License type: assessment
The license status: active, don't use, EULA accepted
Number of licenses: not counted
License priority: bassDon't know why there are so many weeks left
Thoughts on that?
Thanks in advance.
just a little thing
have you tried in config guest... . License to start and so on.
as you said the router to use the license that you have installed.
If you are a license sh what do you get?
Good luck
HTH
-
I use the VPN server through Server 5.1. However, I recently bought an EdgeRouter POE, and I plan to change to its VPN. Can someone offer advantages/disadvantages for one against the other?
Thank you
Jeff
I have no experience using the EdgeRouter and it took quite some dig able to determine that this was the case to all VPN. It seems mainly focused on being a router Ethernet to Ethernet. However as mentioned, I finally found a reference, which suggests he can do the following VPN protocols.
- IPSec Site to Site and remote access
- OpenVPN Site‐to‐Site and remote access
- RAS PPTP
- Remote access L2TP
- PPTP client
Download and read the whole manual I don't remember not its VPN features.
I can say that I gave up on VPN server own Apple as it supports only L2TP and PPTP that these two days are considered to be weak from a security point of view and which can be used for VPN on demand configurations. I now use StrongSwan5 which allows to make a Linux server
- IKEv2 Site to Site and remote access
- IPSec Site to Site and remote access
Both being able to VPN on demand.
IKEv2 is currently considered the most secure VPN solution. IKEv2 is supported the use of VPN client built into El Capitan and iOS 9.
StrongSwan5 works with the built-in VPN Apple customer and StrongSwan5 supports the use of SSL certificates, it also supports force all traffic through the VPN - a common requirement of companies configuration VPN connection.
-
Best VPN for Mac Office-based network protocol Option
I do research of the solutions for the installation of a VPN to a position of up to 15 stations for a customer. All stations are pimps and El Capitan OS X running.
I will implement a router Cisco VPN rv130. I am to decide what the Protocol would be preferable to restrict in Cisco IPSec or OpenVPN using a third-party VPN client.
I look forward to any advice or ideas for better, safer solution.
Thank you!
We usually install OpenVPN Access Server running in VirtualBox or ESXi at our customers and connect to the OD/AD. Put in VirtualBox on Mac is a very simple solution that just works. The integrated web portal is also very clever. $ 9 / user/year and a charge moderate for failing to manage everything you do when even (create and delete users in OD/AD)
Now; since El Capitan, it is not possible to install the client incorporated without disable SIP. Use TunnelBlick client if you do not want to disable SIP during the installation of OpenVPN.
-
best practices of command buttons
Hello
I would ask how others view their GUI with several command buttons (OK Boolean button).
For example, it is a simple application where the user can start data acquisition by clicking on a button with text 'Start monitoring '. Instead of having another button with text "Stop monitoring", usually I just change the label text to "Stop monitoring" button, so it is obvious to the user that clicking on that will stop the process of monitoring the implementation (in the case of this button, I read the text of the actual label with property node in order to decide what message action to the loop the loop handler data acquisition of) GUI).
If I have another button with the label as "Record of startup file" text, I do the same way: after saving the file, change the text 'Stop-save file.
To avoid unnecessary additional programming, this button is in the enabled state if the application is already in the State of "monitoring". In addition, if there is a current folder (+ DAQ obviously), the user cannot press the button "stop monitoring". So according to the status of applications, some of the buttons are enabled, some in 'grey disabled' State.
I wonder how others do their app/GUI?
I don't know if it's a good way to do, but at least I can avoid check additional status of programming and by minimizing the number of buttons...
I use the Boolean options text in the Properties menu where you can have different text for the States TRUE and FALSE to your buttons. This eliminates some of the code that it sounds as you write.
Play / Pause are the two options I usually use if buttons.
-
Hello
I had two 1841 and a router cisco 881. I keep one of this router to HO and remaining at the branch. I have a static internet IP to HO but dynamic IP at the branch.
I want to configure a VPN to connect to HO branch through router. The branch connects via an IP private use of the internet. What VPN is the safer and better for it.
Kind regards
Mero
This is a typical scenario for dynamic virtual Tunnel Interfaces (DVTI):
http://www.Cisco.com/en/us/partner/docs/iOS/12_3t/12_3t14/feature/guide/gtIPSctm.html#wp1027258
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
New to pix, need help with "debug access list of all the" command
I have a pix 515 v6.3. I am tring to use then "debug access list of all the" command to see what traffic is stopped by my access list. However, I don't get any output. I turn execution of the command, but nothing happens. Other debug commands give the console. Perhaps, I do not understand what "debug to access list of all the" is used for. Any help that can be provided would be greatly appreciated.
Tim
Also try following the commands of logging
LOGG on
LOGG buff 7
term Lun
M.
-
DHCP server for debugging VPN clients
We are DHCP configuration to a DHCP server for SSLVPN customers on our ASA 8.2 running, and it does not work yet.
I set the DHCP server to the tunnel profile to use, set the scope of the network dhcp for the group - that seems to be all that is needed.
Currently, the problem is I'm having trouble finding debug commands that provide detailed information on what is happening with DHCP queries.
Debug only the DHCP-based controls seem to be:
DHCPC Client DHCP information
DHCPD dhcpd information, and
dhcprelay DHCP Relay informationI ' ve tried the client and relay debugs and I see is that the client is not giving an IP address valid. " 0.0.0.0/0.0.0.0
The DHCP server is not a request from this ASA for the network defined in the dhcp-network for the group scope, and we see nothing on the DHCP server in debugging results.
Any suggestions would be welcome.
Lynne
you will see a button like "marks" as answered
You can also sort the useful answers.
Concerning
Ashish
-
Aligning Yagi wireless airiels (best practices)
Hi all
In the last months, I installed several WLAN using Cisco's YAGI antennas. They seem to be a nice piece of kit to work with. Although, because they are pretty directional. Most of my installation time is spent lining up properly...
I can't help thinking there must be something better than two guys on the end of the stairs with 2 - way radios! a bit left!, just a little bit!, down! :)
How do the rest of do you? Y at - it special tools for the job? Maybe a laser alignment tool any...
I know that you can measure the intensity of the signal in the ios using debug commands. But it is a little too late at the time where your bottom!.
I look forward to your responses.
Sincere friendships & thank you
Matt
This is a GPS and a good compass can be your best friends.
Go to site A, take a snapshot from the same place (save location). Go to site B, then tell the GPS you want 'goto' site has... it will give you a bearing (some will give you a pointer arrow).
Set the antenna of station B this bearing. Most practitioners can also give you a reading decent altitude to help with 'altitude adjustments.
Take a read / snapshot of the location of site B.
Return to Site A and set this antenna for the running of the Site B (and possibly the elevation).
Directions to RSSI allows to tune 'em if necessary / if necessary.
I know some people who put a scope on the boom of the yagi and aim a strobe attached to the other antenna.
Anything that works...
FWIW
Scott
-
debugging access server problem
I'm unable to connect ISDN users via access servers there is some problem among raduis, the access server and billing machine then I felt I need to debug on the access server, but when I go to run the debug command first, and then I m get no output, below is the reviews. What is good order? I enabled debugging, but I cannot see the logs (outputs) so missing here. Please answer me as soon as possible.
AS5300a aaa #debug?
Accountant accounting
Administrative administrative
attr AAA Attr Manager
authentication
authorization authorization
AAA DB DB Manager
ID Id Unique to the AAA
IPC IPC AAA
attributes of each user by user
treatment of POD Pod AAA
treatment of the AAA Protocol
SubSys AAA subsystem
AS5300a #debug aaa VAC
Aaa AS5300a #debug accounting
AAA accounting debug is on
AS5300a #sh deb
AS5300a #sh debugging
General operating system:
AAA accounting debug is on
AS5300a #.
Hello
You can use terminal no monitor to turn off the same and also check this link for setting up an external syslog server to collect system logs.
you use syslog software installed in the external system to collect the newspapers.
the best bet would be kiwisyslog s/w, which is very easy and roubst.
You must configure your router and point the same to send messages to the external system.
regds
-
with 2 levels of firewall VPN remote access
We have two firewalls of different suppliers, with the first level being a cisco firewall. The Setup is:
ISP <-->(router) <-->(Cisco Firewall) <-->(another firewall of the seller) <-->LAN internal
We need to give remote users (with installed VPN clients), internal access to certain resources in the local network.
My question, where can I configure my IPSec VPN, for best security practice, given that my router, Firewall-1 & Firewall-2, all take care the VPN features.
I also want to allow remote users (who are they assigned local IP internal IP pool), to allow to specific resources (servers read) & specific ports.
So can implement an access list, after that the VPN is terminated & users get their local pool IPs?
Thank you & best regards
MD
Hello, MD,.
What is the version of the code that you run on your PIX? If you run version 6.x of the code, then you will not be able to use the vpn-filter command to restrict access to certain IP addresses.
You should run version 7.x for it where you can specify an ACL to restrict traffic.
In addition, only some PIX firewalls can be upgraded to version 7.x, please look in the link given below
http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_qanda_item09186a00805b87d8.shtml#Q1
If you can not pass the PIX to version 7.x, then you will need to use another VPN device.
Hope that answers your questions. Rate this post if it helped.
See you soon,.
Gilbert
-->-->-->--> -
Ask about hub and spoke VPN between several sites
Hello
I currently have a 'hub' ASA 5505 that connects to 4 sites running 877 routers.
Since the network hub, I can connect to all the sites fine but what I would do is almost to compartmentalize the different VPN links in small groups.
The ASA 5505 hub mainly provides IP telephony via the VPN from a PBX allowing users at the other end of the VPN to make outgoing calls and receive incoming calls. However, a couple of the sites would be able to call them internally through the hub. It must obviously be allowed between their different networks of traffic.
Currently, when you try an internal call rings, but there is no audio data anyway. I guess that's due to restrictions of access list. I don't know yet if what I'm trying to achieve is possible as I'm a bit of a rookie, but any help would be appreciated. I have attached the hub and 2 rays below.
The ideal final result would be the interconnectivity between the two rays through the hub, it seems reading as its possible, but I do not understand my head around it! It would involve using different subnet to the hub masks?
Any help would be greatly appreciated!
Thank you
Jack
ASA "hub" VPN config
network of the OAKOW object
255.255.255.0 subnet 192.168.12.0
network of the OAKIV object
subnet 192.168.11.0 255.255.255.0ACL_OAKOW to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
ACL_OAKIV to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.11.0 255.255.255.0interface Vlan1
nameif inside
security-level 100
192.168.5.1 IP address 255.255.255.0
Static NAT to destination for static LAN LAN OAKOW OAKOW source (indoor, outdoor)
Static NAT to destination for static LAN LAN OAKIV OAKIV source (indoor, outdoor)network obj_any object
NAT dynamic interface (indoor, outdoor)Access-group interface incoming outside
Crypto ipsec transform-set esp-3des esp-sha-hmac HOSTEDTS ikev1
card crypto HOSTEDMAP 100 corresponds to the address ACL_OAKOW
card crypto HOSTEDMAP 100 set pfs
card crypto HOSTEDMAP 100 peer set 4.3.2.1card crypto HOSTEDMAP 100 set transform-set HOSTEDTS ikev1
card crypto HOSTEDMAP 101 corresponds to the address ACL_OAKIV
card crypto HOSTEDMAP 101 set pfs
HOSTEDMAP 101 peer set 5.6.7.8 crypto card
card crypto HOSTEDMAP 101 set transform-set HOSTEDTS ikev1HOSTEDMAP interface card crypto outside
crypto isakmp identity address
No encryption isakmp nat-traversal
Crypto ikev1 allow outside
Crypto ikev1 am - disableIKEv1 crypto policy 1
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800internal TBOakOW group strategy
attributes of Group Policy TBOakOW
Ikev1 VPN-tunnel-Protocolinternal TBOakIV group strategy
attributes of Group Policy TBOakIV
Ikev1 VPN-tunnel-Protocoltunnel-group 4.3.2.1 type ipsec-l2l
tunnel-group 4.3.2.1 General attributes
Group Policy - by default-TBOakOW4.3.2.1 tunnel-group ipsec-attributes
IKEv1 pre-shared-key *.tunnel-group 5.6.7.8 type ipsec-l2l
tunnel-group 5.6.7.8 General attributes
Group Policy - by default-TBOakIV
tunnel-group 5.6.7.8 ipsec-attributes
IKEv1 pre-shared-key *.877 VPN "spoke 1' config '.
VPDN enable
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
lifetime 28800isakmp encryption key * address 1.2.3.4
Crypto ipsec transform-set esp-3des esp-sha-hmac TB0ak
map OakOW 10 ipsec-isakmp crypto
defined peer 1.2.3.4
game of transformation-TB0ak
PFS group2 Set
match address VPNinterface Vlan1
Description - LAN-
192.168.12.1 IP address 255.255.255.0
IP nat insideinterface Dialer0
card crypto OakOWoverload of IP nat inside source list NAT interface Dialer0
NAT extended IP access list
refuse the 192.168.12.0 ip 0.0.0.255 192.168.5.0 0.0.0.255
IP 192.168.12.0 allow 0.0.0.255 any
list of IP - VPN access scope
IP 192.168.12.0 allow 0.0.0.255 192.168.5.0 0.0.0.255877 config VPN "talked about 2'.
VPDN enable
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
lifetime 28800isakmp encryption key * address 1.2.3.4
Crypto ipsec transform-set esp-3des esp-sha-hmac HOSTEDTS
map TBVPNOak 10 ipsec-isakmp crypto
defined peer 1.2.3.4game of transformation-HOSTEDTS
PFS group2 Set
match address ACL-VPN-to-ASAinterface Vlan1
Description internal LAN-
192.168.11.1 IP address 255.255.255.0
IP nat insideinterface Dialer0
card crypto TBVPNOakoverload of IP nat inside source list NAT interface Dialer0
IP extended ACL-VPN-to-ASA access list
ip licensing 192.168.11.0 0.0.0.255 192.168.5.0 0.0.0.255
NAT extended IP access list
deny ip 192.168.11.0 0.0.0.255 192.168.5.0 0.0.0.255
ip licensing 192.168.11.0 0.0.0.255 anyYou must rewrite it ACL on spoke1:
NAT extended IP access list
refuse the 192.168.12.0 ip 0.0.0.255 192.168.5.0 0.0.0.255
refuse the 192.168.12.0 ip 0.0.0.255 192.168.11.0 0.0.0.255
IP 192.168.12.0 allow 0.0.0.255 any
list of IP - VPN access scope
IP 192.168.12.0 allow 0.0.0.255 192.168.5.0 0.0.0.255
IP 192.168.12.0 allow 0.0.0.255 192.168.11.0 0.0.0.255
and talk 2:
NAT extended IP access list
deny ip 192.168.11.0 0.0.0.255 192.168.5.0 0.0.0.255
deny ip 192.168.11.0 0.0.0.255 192.168.12.0 0.0.0.255
ip licensing 192.168.11.0 0.0.0.255 any
IP extended ACL-VPN-to-ASA access list
ip licensing 192.168.11.0 0.0.0.255 192.168.5.0 0.0.0.255
ip licensing 192.168.11.0 0.0.0.255 192.168.12.0 0.0.0.255
And ACL on SAA
ACL_OAKOW to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
ACL_OAKOW to access extended list ip 192.168.11.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
ACL_OAKIV to access extended list ip 192.168.5.0 allow 255.255.255.0 192.168.11.0 255.255.255.0
ACL_OAKIV to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.11.0 255.255.255.0
You must allow the traffic of intra-interface:
permit same-security-traffic intra-interface
also, you can check the translation NAT nat debug command
_____________________________________________________________________________
Help seriously ill children all together. All information on this subject, is posted on my blog
Maybe you are looking for
-
Re: Camileo X 100 - cannot change files
I bought the Camileo X 100 and have been frustrated since I got it. I can't change the files with anything, Adobe premiere CS5 sees them as only Audio, Sony Vegas Studio HD 9.0 see them as video with no audio. I tried to convert them, but it converts
-
Final result failed test code smart status of WD10S21X-24R1BT0-SSHD - 8GB - 931,51 GBs, WDC: W1QXNCAL8-NXLHWBFailedSaturday, September 17, 2016 21:38:54Analysis of equipment has detected one or more failures.Reference the following error code when co
-
Pavilion g7-1019wm cpu upgrade
I am trying to replace my old HP laptop motherboard from overheating problems. I can't afford much right now so I'm looking for the market opportunity and came across a g7-1019wm Pavilion. The processor is 200 Mhz faster than my laptop today, but I w
-
Whenever I turned off my computer, the update statement appears, but KB2686509 is usually the only one update, and of course, nothing happens
-
Make XP Taskbar buttons loading in order instead of the startup?
On my old computer running Windows 2 k Pro years there, I was able to configure my startup programs would load their buttons on the taskbar in the order that I preferred. But who was so long that I forgot for a long time how I managed this thing. I