debugging access server problem

Similar Questions

• Remote access server problem ASA5510

  Hello guys,.

  I have a problem with ASA5510 configured as a remote access server. We use the client VPN in Windows XP. Look at the requirements I see no problem, but when I try to connect to the server it doesn't open the negotiation of VPN. I had the problem like this before, but at least I saw the traffic hitting the ASA. Now, I don't see anything hitting the device. I enclose the current configuration of the SAA. The VPN client on my laptop is configured correctly. Thank you in advance!

  RVR

  Hello

  Happy to help and thanks for the note.

  This command is not required, but 90% of deployment I've seen has this configured command and is the default value for the SAA. In a Word, what this command is open to IKE and IPSEC ports and also does not check ACL entering ASA for IPSEC traffic.

  In case if you do not have this command enabled, you must configure inbound ACL to allow IKE, IPSEC and text clear remote access VPN traffic after IPSEC packets get decrypted on the SAA.

  Kind regards

  Arul

  * Rate pls if it helps *.

• Causing the problems of internet connection Internet access server

  I have covered a lot of discussions on this issue and have tried all the fixes I found relating to this issue but did not have a chance to find a solution to my problem. I apologize if this is a repeat post, but as I said, none of the questions I found helped.

  ------

  I have 2 laptops (windows 7), 2 xbox 360 s, and smart phones that will all connect to my internet connection with a problem and run great.

  However, I recently bought a PC oriented for the game, and I got this error because I got it.

  I am able to connect to the Internet. Google has always works as Youtube, but youtube videos will stop eventually buffering until I have restart the browser.  Most of the games that I play online will launch and play very well in the beginning, but then they lose the internet connection and not return it until I have close the game and restart it, then it works very well for 5 minutes for an hour, but ends by loses connection again until I got close the game and start it again... However, when games lose connection if I Alt + Tab back on the desktop I'm always connected to the internet and can run my internet browser to always connect to google or youtube... Other sites are also affected (Netflix, Microsoft, Outlook, contraction, etc. all will simply keep the load and eventually tell me 'the site takes long to answer').

  I tried the update of Device Manager, but it says it cannot find the updates for the server to access Internet with yellow Triangle /!

  In the currency manager<><>
  "The drivers for this device are not installed (Code 28)

  To find a driver for this device, click Update driver. »

  When I click on "put updated pilot."

  "Windows was unable to install your Internet access server .
  Windows found driver software for your device.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  However after visiting the Linksys website, the only thing close to that I found was to update the firmware, which I did, but was still does not solve the problem, and I can't seem to find everything related to the Internet Access Service.

  I then tried calling Linksys (router Linksys E1200 series), who directed, I call my ISP, which then make sure that my drivers are up to date.

  At the beginning I was not able to check for an update for access to the Internet Server (all have been 'grayed out' and unclickable).  However after clicking on "Devices and printers" under the start menu, right click router<>

  I tried also to open the command prompt

  I did the "Winsock" fix according to the instructions and an IP reset via the command prompt, always with no success.

  I spent about the last 48 hours trying to get this update with no luck, I finally met a thread with a post that seems to fix the problem for Vista, but I need the version of Windows 7 which has not been registered.  A member of the community had provided a link to download the driver I can't find for the life of me.

  I'm typing this from my laptop (not the PC having problems) and it internet runs fine on this legacy without problems as are all other currencies clung to the same internet connection. The PC in question is the only one that is connected to the router, all the rest are wireless and work very well. (No wireless in the PC with the question card)  If I wired my laptop (with the same Ethernet cable that runs on the PC with the questions) my laptop connects to the internet and always runs very well.

  Any help would be greatly appreciated.

  Hello Dubz,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is your default browser?
  2. What is the brand and model of your computer?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  If you are using Internet explorer as default browser, then please use the suggestions provided in this Microsoft Knowledge base article and check.
  Reference:
  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449/en-GB

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, please use method 2.

  Method 2:
  I also suggest you try the steps in this Microsoft support article and check.
  Reference:
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I can't access a site because of server problems. I don't know anything about. can someone help me?:

  I am just by clicking a link and when I do I get a server problem. I do not know where to go to from there.

  Hello Sharon,

  Please answer these questions to identify the problem.

  1. what link you are talking about when you say "by clicking on a link?

  2. What is the exact error message received when you say "do a server problem?

  3. how you try to access the link?

  4. what version of web browser work?

  5 a it works much earlier?

  Please post with the required information so that we can help you further.

• I can't access my windows store error we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. »

  Original title: I need help please.

  I cannot access my store of windows and can't update all the windows applications not to mention that movie maker and photo gallery witch don't need to be updated. And because I can't access windows store I can't windows 8.1 update for my laptop. When I click on the app store window at startup it loads for a while and what he said to me, 'we could not connect to the Bank. This could have happened due to a server problem or network connection has expired. Please wait a few minutes and try again. "I check my internet and went into my settings to find something wrong with my connection, but I found nothing. So I did a few virus scans and found some malware on my computer. Then I took all the malware from my computer and still could not get windows store to open. I tried to download the updates to my computer and it wouldn't let me. How can I get my store windows to work and get my computer up to date? Help, please.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Read the link above and run the Troubleshooter "App."

• Server problem?  Cannot access our rooms to the United Kingdom

  We are unable to access one of our Acrobat Connect Pro rooms to the United Kingdom.  Simply, we get a blue bar hanging saying 'sign in' whatever the location, browser, pc etc etc.  Not even through iPad can access us.  Since at 0850 am hour British.

  Also, we cannot access recorded sessions, but we can get into our dashboard general Adobe Connect.

  Cannot access the content downloaded in our shared content. Once you click on the URL for it, it freezes / or shows no connection.

  Can anyone help?  Trying to contact the Support of Adobe Connect is a hideous job.

  Matt

  PS: It's interesting because I'm writing a presentation I'm doing for the eLearning Show Thursday, which is run by learning UK & Performance Institute.  I wonder what I will eventually talk...

  The server problem has been identified and fixed. The system is stable now. Let us know if you encounter any problem.

  We apologize for the inconvenience.

  Thank you

  Ashwani

  Acrobat Connect Pro Support Team

• "Windows needs to install driver software for your Internet access server.

  Hello everyone, since April 3, 2010 I get this message just after I turn on the computer and Vista SP2 is ready to ROCK, I change my router in 31 March, for a Lynksis E1000 and it works perfectly since then.

  Now, in the cry of the message I have different options from the tree, if I click in the star of windows option "locate and install driver software (recommended)" the search for drivers to install, but then another small window appears asking me to insert the CD that came with my Internet access server (it shows as another option that says "I have not a disc. Show me other options') and there is when I stop because I fear :)

  What is c? WHAT is an Internet access server?

  My ISP is Comcast, I don't know if it's important.

  Can someone help me? THANKS :)

  Easy problem to solve, go in right Device Manager click on internet access server select Update driver they are looking on the web for the driver. It may take up to 5-10 minutes. The Device Manager will change other devices forInfrastructure. network devices / Microsoft Wireless Router Module.

  Terry

• WRT610N and twonky media server PROBLEM

  Hi, I finally had some time to install my network wireless at home, everything works well except the media server, im trying to connect an xbox 360 and ps3, they see in the media server and I can access the problem is that the only file that they see is "trial expired, please visit http://twonkyvision.com.

  I already tried to go and found a topic on it (link ) and it helped me to access the media server settings, I tried the solution posted, but it didn't work; I looked in the options and found that over my registration key number is bright red the following words: "this key is already used by another instance of the server." and here it is a counter with 0 days for the trial.

  Anyone know how I could solve this problem or what it exactly means and how to solve this problem, my router is new, but it has been sitting on my desk almost three months because I don't have the time to install it.

  Any help would be appreciated, thanks.

  OK, I have a major update and a possible solution, I was buggin the twonky people until they gave a new key number who worked and solved my problem, on the other hand, they have told me that, with the next firmware, updated the router doesn't ask for the key more could operate freely, so you can either go to the twonky´s customer service or wait for the next update. good luck to all

• Ent of Windows 7. Apart from 2012 - Windows cannot access \\server\share$

  I have a treatment of strange problem with part of 2012 R2.  We have a lab with 30 workstations Windows 7 Enterprise.  They all have the same office via a redirection of folder GPO applied to a share on the server of 2012 R2 mentioned above.  All but 4 of them can connect and pull on the desktop the appropriate shortcuts, network folders, etc.

  The share permissions so no denies explicit.  In an effort to solve this problem, I added everyone and authenticated users, with read permissions on top of the appropriate ad group object that already had read permissions and, of course, SYSTEM and with full control Domain Admins.  NTFS permissions have, of course, CREATOR OWNER, SYSTEM and with full control Domain Admins.  Also, the appropriate ad group has read permissions.  No NTFS clear or rejects the request.

  Using the same account that belongs to the appropriate group or my domain administrator account (which has no office redirected) I can connect to all the workstations and all, but the four mentioned above get the redirected folder desktop.  When I authenticate my account with DA and try to connect to the share on these four computers I get the same error to the user:

  Network error

  Windows cannot access \\SERVER\Share$

  You are not allowed to access \\SERVER\Share$.  Contact your network administrator to request access.

  I think we've all seen this error before.  But I only saw him associated with NTFS permission issues or sharing.  Frankly I'm perplexed.  Any ideas on what's going on?

  Edited to add: I don't think it's a problem with sharing.  Clearly, it's a matter of workstation since 26 of 30 machines Win 7 can be connected without difficulty.  And I don't think it's a matter of profile either since I've never authenticated on these workstations with my domain account.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• VPN error 868 the name of the remote access server is not resolved

  I use Windows 7 Home Premium and you want to configure a VPN with my office network that uses the Check Point Safe@Office.  I am unable to log in and get the error that does not resolve the name of the remote access server and Windows cannot find the host using DNS name.  Any suggestions on what to try to fix the problem?  I set up the VPN connection according to the instructions of our network administrator.  We use XP in the office.

  Hello
  Welcome to the Microsoft answers site

  The question that you'd be better suited in the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/ForefrontedgeVPN/threads

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Server problems

  Hello everyone,

  I have problems connecting to the server. I recently downloaded Microsoft Office 365, and I have the product installed on my computer. However, when I click on the ""Sign in"button in the upper right corner of Microsoft Word (Excel, Powerpoint) it sends a message saying"Sorry, we have temporary server problems."" At first I thought the problem was just of Microsoft Office, but now, I've seen other products I was installing have said similar things such as "cannot connect to Server", "is there a problem with your connection", or 'server '.

  I have wifi and there are always 4-5 bars in the lower right corner, and I am able to use the internet browser (I use it as I type this). The first thing I looked at was the server information. Most of the information went over my head, because I am a novice at this stuff, but the essential, that they mentioned was to connect the clock of the internet via the control panel. I did and I still have these server problems. Another thing to check, I saw was the bing via the command prompt. I tried and it said 0% loss (4 envoys and 4 received) and server problems have continued.

  I have a Windows 7 Inspiron 537 s, and my internet is provided by AT & T.

  This office has been mainly sitting back where it has not been used much (my brother and I used sporadically). I decided to move instead of easier access, because it's a good computer.

  The main culprit, I can think of is the wireless network adapter I bought, so this computer is Wi-Fi (instead of an Ethernet cable on the floor), but like I said that the computer has a strong wifi connection. The adapter is a Netgear AC1200.

  No other devices on my network are facing this problem, it's just this office.

  So, just a little recap

  1. I have a wifi connection, and I am able to use internet browsers and download files.
  2. I can't connect to the "servers", such as Microsoft Office.

  Any help would be appreciated, because I can't seem to find someone with a similar problem on the internet.

  This is a link to where I posted this question in the Forum Office (Accident, I didn't see it), where a person tried to help me and there is a little more information. Aid has led to post me here, and the guest in this thread is the same as exact as this thread.

  http://answers.Microsoft.com/en-us/Office/Forum/office_365hp-office_install/server-problems/e8fdace1-4CEC-4B36-95a8-8508dc90af45

  Hello

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, it seems that there could be a chance of third-party applications, services or security software are limiting to connect.

  So I would you suggest temporarily disabling security software and perform the clean boot and then try to sign in to Office 365 and see if it helps.

  Step 1

  Try temporarily disabling security software and then see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Step 2

  Perform a clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  In addition to that I suggest you to check the system files are they work very well or not and to check who are trying to run the (SFC) System File Checker tool.

  Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope it would help. If the problem still persists, post back with the current state of your computer and the result of the suggestions, we will be happy to help you.

  Kind regards

• URL is a mistake not protected in Access Server SDK with HOST identifier

  Hello
  
  I am facing the problem with the SDK to access server once we switched to 10.1.4.2 and BP08. The problem is when I ran the Server SDK access code with the protected resource, he demonstrated that URL is not protected as below.
  
  Resource http:/welcome.html is not protected.
  
  Before adding the HOST identifier it works fine. After you have added the HOST identifiers it does work very well. After you apply the patch BP08 are of HOST identifiers must be there for the access door. This is the problem that I am facing.
  
  All can help you solve this problem.
  
  Thank you and best regards,
  
  Valentine

  Hi Valentine,.

  You must pass the host name in the ASDK to see if it is protected. Without host identifiers, use will be protected on all web servers (which have WebGates); with the host identifiers, you must specify the host name in the url, you go to the SDK so that he knows what a host you make the request. Try passing http://myhost.domain.com/welcome.html in the SDK (where the string 'myhost.domain.com' exists as one of the relevant changes in the host identifier).

  Kind regards
  Colin

• Access denied problems

  There are 2 of us maintain our Intranet using MX2004. We both Intranet defined as our local site that we both regularly updates.
  
  We continue to receive access denied errors when trying to save the edited html pages (we are not both in the same file). This happens often, and often you have to save the file under a new name, rename it and re-save. Sometimes it does not. Recently, when we get the access denied errors Dreamweaver deletes the file, that we are working on.
  
  The world is - that sound familiar at all? Anyone has any ideas how to fix? Is this a server problem or a Dreamweaver one? We use both XP Pro.
  
  Thank you

  We are having the same problem. The problem does not occur until applying the 7.0.1 update to 7.0 mx 2004.

  How can I remove this update?

• Question of access Server SDK.

  We have implemented SSO to one of our application (App1) and is fine(in production) work. I'm configuration application (App2) plus one for SSO.
  
  App1 is configured using webgate on our proxy server. the entire application through the webgate, urls are validated against the NPS server and have access. no problem here
  
  App2 - Webgate installed on my machine local apache server proxy, set up the new field of politics, and using the same identity as app1 servers, the app works very well. I'm trying to decode the obssocookie to retrieve the user ID, I created a Web service that takes in the obssocookie and decodes retrieve the user name, so that the service can be used in different applications (which are not SSO) to authenticate the user against the CAO, if the user is already logged.
  
  My question is I webgate configured on my local machine also installed the sdk to access server (Oracle_Access_Manager10_1_4_0_1_Win32_AccessServerSDK.exe) on my local computer, Setup the classpath and path as variables described in the Administrator's guide. I'm under weblogic 9.2. My index.jsp page accepts the credentials of the user and it publishes on login.jsp (protected Ihave the login.jsp) in the field of politics with the form based authentication schema.
  
  I created a testsso.jsp (unprotected page) to test the sdk. Here is my code. I always get an error when I access the page testsso.jsp
  
  cm = challenge my_webgate = 268e2d09986e24c7
  01/08/2009-12:41:17 message received: 14 0
  cm = access_dlsso01 challenge = 071a577990ee977d m = ma = 25 rt = 1
  01/08/2009-12:41:17 sending message: 0 15
  response = 7b951e1ae2109fb4c7319060f2b9dc57
  01/08/2009-12:41:17 message received: 0 15
  answer = c045c076d3af5af4a2038a45ede9613f m = ma = 25 rt = 1
  01/08/2009-12:41:17 sending message: 0 1
  RO = t = 0 o = No. = r = nr = wu = http://mymachine/myapp/login.jsp wh = wo = 1 wa = 0 ws = st = my = mi = 20 6 sg = 0 sm = version = 3 DB = NULL
  01/08/2009-12:41:17 message received: 1 0
  RO = t = 0 o = no = r = nr = wu = http://mymachine/myapp/login.jsp wh = wo = 1 wa = ws = ri = NULL st = ma = 0 5 mi = 20 sg = 3236 sm = rt = 0
  
  com.oblix.access.ObAccessException: HTTP:http://mymachine/myapp/login.jsp GET col resource not protected
  Ed at the ObResourceRequest, so there is no associated authentication scheme.
  
  
  ObResourceRequest resReq = null;
  The user ObUserSession = null;
  ObAuthenticationScheme authnScheme = null;
  
  Cred Hashtable = new Hashtable();
  CRED.put ("userid", "TEST");
  CRED.put ("password", "TEST");
  Try
  {
  put the correct path for your installation of AccessSDK here
  ObConfig.initialize("C:\\OAM\\oblix\\AccessServerSDK");
  resReq = new ObResourceRequest ("HTTP", "http://mymachine/myapp/login.jsp", "GET");
  check if it is protected, if so, create a user session
  If (resReq.isProtected ()) {/ / commented because the resource is still to come as unproctected. when I used the device for access control}
  I get that the resource is always protected with an authentication scheme
  authnScheme = new ObAuthenticationScheme (resReq);
  If (authnScheme.isBasic ()) {}
  System.out.println ("# is protected #");
  User = new ObUserSession (resReq, cred);
  If (user.getStatus () == ObUserSession.LOGGEDIN) {}
  System.out.println ("the State of the user is LOGGEDIN" + user.getStatus ());
  {if (User.IsAuthorized (resReq))}
  System.out.println ("Permission GRANTED");
  }
  Token = user.getSessionToken ();
  } else {}
  System.out.println ("user's status is NOT LOGGEDIN");
  }
  } else {}
  System.out.println ("is not fundamental");
  }
  {/ *} else {}
  System.out.println ("is not protected");
  }*/
  ObConfig.shutdown ();
  } catch (Exception oe) {}
  
  ObConfig.shutdown ();
  oe.printStackTrace ();
  }
  
  
  
  
  Please advice on how to use the sdk
  
  Published by: user7498134 on January 8, 2009 10:35

  Looking at the exception - "com.oblix.access.ObAccessException: resource unprotected GET HTTP:http://mymachine/myapp/login.jsp passed to the ObResourceRequest, so there is no authentication partner scheme ', apparently than wants the SDK is the resource to be spent as" / / mymachine/myapp/login.jsp ", i.e. leave the superfluous" http: "your URL in the program.

  Let me know if this helps.

  -Vinod

• changed Kapersky security with mcafee and cannot retrieve e-mail messages. problems of server on the computer. McAfee can enter my password and my email. they say that I have a server problem.

  changed to mcafee kapersky and cannot receive my e-mail address. McAfee can use my username and password and receive my email. they say that I have a server problem.

  Hello

  I suspect that the problem is with your e-mail service provider, therefore, suggest you to contact your provider of messaging for better help.