Material analysis

Similar Questions

• HP Envy ts m7 laptop: laptop recovery

  I decided that I was going to do a mobile recovery because I noticed that my computer was slow and I would like to do a fresh install once in a while.  I got HP recovery discs last year and kept them in case I wanted to make a new one.  I started once last night and put in all the data disks (3 more driver cd) everything seems to be fine, as it does for all disks, and towards the end, it says that it is almost ready.  However, as it does the final reboot, it comes up saying that the recovery attempt failed.  I restart the computer and it says the same thing.

  I did extended, material analysis which took about 4 hours and everything this past.  I went back to the commissioning and there was a recovery option, showing on-screen, once again, so I decided to choose that.  Still, she didn't

  I did the cover three times, with the same error.  I checked the newspaper and I get the following errors in the record journal

  chkerrbb.cmd detects an error in the PINIST_BBV

  chkerrbb.cmd Check c:\system.sav\logs\burnbootwarn.log

  chekerrbb.cmd, or visit c:system.sav\logs\burnbootmerge.log

  No idea what's wrong here?  It's not like I can go to the c drive and check for these errors.

  If it is a model Intel-try changing the date in the BIOS to the 01/01/2012 then attempt to recover again.

• Graphics HD 530 Intel (r) card problem

  Hello guys,.

  I tried to contact Lenovo support team but cannot find all possible ways to contact them.

  I am, however, having a hard time to solve my problem of Intel Graphics 530.

  I have a laptop Lenovo Y700-15ISK, what is new and I got new band just a couple of days, but this is actually not a good start with Lenovo.

  The problem is that my screen goes black sometimes, and I have to close my laptop and then turn it back on.

  I tried to solve the problem with Lenovo Solution Center and I got this error code: WVC007002-UL7XPG below the video card: Intel(r) HD Graphics 530 (Test of mathematical operations).

  I don't know really what I have to do in this case, and how I can communicate with Lenovo, because they have no possible way to receive customer emails which is a really bad sign.

  Any help would be apperciated.

  Kind regards

  Hello

  I had almost the same problems with my Y700 with the same hardware failure on the graphics card Intel 530 Mathmatical test chip. I just got the phone with support from Lenovo and they basically updated the Intel graphics driver with the latest beta drivers on the Intel Web site. The pilot, I had was the last that is displayed on the Lenovo for my Y700 page which was the 10.18.15.4271 version (http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-y-series-laptops/y700-15isk/do...). The driver downloaded the support person there is version 15.40.18.4380 (https://downloadcenter.intel.com/download/25749/Intel-Beta-Graphics-Driver-for-Windows-7-8-1-10-15-4...). She did some update to the solution Center and revived material analysis and my graphics Intel 530 now passes the test of mathematics. She said, the keyboard and the touchpad freeze and flickering of the screen could be linked to the old driver Intel VGA in order to update the drivers could solve the problem. There are things one additional support they can do to try to resolve these problems, but I thought I'd see what happens with the first Intel driver patch.

  When it comes to communicate with Lenovo, there is a link on their support site to schedule a time for them to call you. I think you can do a live also chat session, but that option is not 24/7, as the hotline. See the page contact us. In my view, do not put your serial number to get all the options to connect with them and I had some problems with getting my serial number put in shape with Chrome. After that put it in the news, by clicking on submit this turn and never change the display of the page, it has been accepted. I tried to use IE and was able to get my serial number set. Their support site has some problems, but the technical support which helped me was quite helpful and was able to get everything updated pretty quickly.

  I'll keep you posted if I still have problems with the new drivers.

  Good luck!

• How to disable Lenovo Solutions Scan it permanently?

  Hello

  How to disable Lenovo Solutions Scan it permanently? I think it's what his name. It appears on my screen.

  Thanks in advance.

  The following steps should disable the analysis of material on version 2.8.xxx

  Launch of LSC.  On the homepage, select dashboard. Change

  If hardware scan is on events not monitored, move it to the left side. Save the settings.

  This option will now be shown on the dashboard and check-up tab.

  Material analysis event inform into/out of the dashboard does not change the scan function. Hardware scanning on the dashboard does not change the scan option.

  ==

  Now to the hardware scan tab check-up.  Then select the option of planning.

  Now, you can turn off the option to run.

  

  

  The extent of the Task Scheduler,

  win10 > AutoScan > apps > win 10 administrative tools > Task Scheduler.

  For other OS, follow Sashi notes.  If you can find disk management, you can find task scheduler.

  =

  

  Right-click on the entry, disable.

  Sashi comments to disable parsing by moving the selection of dashboard are incorrect.

  We are now good!. Upgrade to the latest LSC.

• HP Advisor Tune Up.

  I have a HP Pavilion dv 7 Notebook.  Whenever I tried to perform a tune up the material analysis and complete software function never even if I close all applications and leave the computer for more than 12 hours

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is especially useful if you are running a 64-bit Windows version, because it helps to prevent problems when reinstalling HPSA.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When uninstallation is completed, restart the laptop.

  When windows has reloaded, download and install the latest version of the page at the link below - HP Support Assistant download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Impossible to install the Bluetooth device driver

  A few times I had to reinstall my Bluetooth device driver, because it stopped working.  Through the Device Manager, it shows a yellow exclamation mark next to the device.  Previously I uninstalled the device and then conducted a material analysis and the unit is back in place.

  This time, I said to uninstall the driver wait for the o/s to find the drivers.  He did well.  So now, I'm sitting here with the projection of Bluetooth device as unknown.  I said to find the driver online, and he said: he did not find any.  So, how I pray not tell to get my Bluetooth driver install now?  Thank you!

  Never mind.  Had the driver on the manufacturer's Web site.

• Results of analysis of material, laptop B570

  I did a scan of material for the first time on my lenovo B570.

  He noted the following:

  WPE001001-BL7A3D result code

  10/06/2016 execution date 00: 24

  PCI Express device

  Can you help me understand what it is?

  And what I do about it?

  Thank you

  Chuck Monroe

  U.S..

  Mod edit: Email address removed to protect the owner of e-mail harvesters.

  Don't worry you are right, I think it's a bug in the center of solutions Lenovo or Lenovo software you used for the analysis of the material.

• analysis of the material space

  is there a way I can check my total disk space Widget?

  I seems if involved in the properties panel, double space do I really use?

  ???

  something like an analysis of hard disk

  You can use free utilities like TreeSize or WinDirStat to see what is taking place. MS - MVP - Elephant Boy computers - don't panic!

• Material from IO error analysis

  original title: Scan

  WindowsXP SP3 IE8 House

  printer Samsung CLX3175FW is printing, but does NOT SCAN

  I/O hardware error

  Thank you

  Thanks to Microsoft windows live onecare support I can now scan my printer 1866 663-2273

  I had too many viruses on my PC that had to be removed manually

  THANKS MICROSOFT

  Ettore

• Analysis of material

  Ive just done a scan on my hardware

  Hardware and devices

  Publisher details

  Problems found
  Hardware changes may not have been detected	Detected
  Search the recent hardware changes Successful

  Verified issues
  Update of Windows configured to never install drivers	Checked

  Problems found

  Details of detection

  6 Hardware changes may not have been detected Detected

  Verified issues

  Details of detection

  6 Update of Windows configured to never install drivers Checked

  The driver updates are not installed automatically when detected by Windows Update.

  Details of detection

  Publisher details

  Hello

  Devriez get you your software driver from your computer or hardware manufacturer, without a Windows Update (with the exception of updates from Microsoft Hardware).

  If you need to update the drivers, go to the website of your computer or hardware manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  See you soon.

• Analysis of the material for building CARS on VM

  Can I install this RAC 64 bit on virtual machine on my dell vostro 1500 labtop, his 1.79 GHz with 2 GB RAM and 500 GB external hard drive
  
  I ordered the kit includes Oracle VM 2.1.2 and Oracle Enterprise Linux 5.2 (x86_64-bit).
  
  What I am trying to build
  http://www.Oracle.com/technology/pub/articles/Wartak-RAC-VM.html#1

  You have the disk space, but not the memory, even for the Oracle VM, OEL/RH5 hypervisor memory refresh will take at least 1 G to run. Then, with your operating system base, hypervisor, Linux and Oracle (clusterware and DB), it may be possible, but I think you so you would be Exchange terrible performance. I would look at a MINIMUM of 3 GB or 4 GB of RAM to try this configuration.

  See you soon

  Jay

  http://www.grumpy-DBA.com

• Errors/problems with my brand-new Equium A200 15I (including video material)

  Hello

  I am treated to a new computer laptop last Saturday and only had for about 3 and a half days so far but I noticed a few things that I wasn't sure were errors/defects or if it was simply because its news, like the fact that sometimes I type with the keyboard and some letters do not appear on the screen , I think it's probably more to do with me not type or support pretty strongly on the keys rather than anything else, his is not so much now... the touchpad becomes a bit sticky too and he thinks I want to scroll up and down when I move the cursor does not scroll sometimes but I managed to make it work I think that most laptops have glitches like that and no doubt I could help fix it in calibrating the pad (?) touch I did have time to consider the issue and yet if... There are a few other things well and more disturbing than this morning I got an error of video material, so now im a little just worried or suspicious that it may be a real fault with him and would like to know if it is the case, if its something I can fix eventually (im no expert especially with the material, but I can always try to download and installation of updates / corrections and this kind of thing so she could solve the problems).

  The main thing that concerns me more, is that this morning a message suddenly come to the screen, warning me that there was an error in video material, last night, I clicked on a button, I think for load more information. and I took this perforated cap of it: -.

  http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg

  I thought it may be useful to view the actual complete message rather try everything and paste the info., ok to be honest I've not noticed it allow you to copy to the Clipboard, but good (oops lol).

  I know there is a topic on a similar error, but I didn't want end-to-end on this discussion because I assume that it should be for this mistake of people who will be discussed, mine may be slightly different, I don't know... I followed the instructions given in this discussion and I checked the Device Manager and no material defects are appearing, btw it is said in the Manager of peripheral devices, graphics cards, it's a Mobile Intel 945 GM Express Chipset Family, I'm sure that all laptops A200 15I have the same card, but I thought I would just make it clear that. Incase that wasn't the right thing to check I also checked under "Audio, video and game controllers" (as the error says it was a video hardware error) where it lists the only as being "Realtek High Definition" Audio and I checked the properties, both under properties it says that the device works properly, without signs of defects...

  The thing is, I had read somewhere online that there is a problem with the graphics or video cards. I had read that they can be glitchy and sometimes break after a year. I also asked my father about it and we looked at it as a graphics card Intel that came with this laptop, which it is, and we counted that the Intel chips is as reliable as any other brand really... so I don't think there should be a problem, well that is there I have until September next for repair prior to the expiration of the warranty!

  What surprises or sort of worry, however, is that the error message was only introduced to me this morning. It dates from error, as having occurred at 19:53. I use it at night last, and infact, I went to take a shower and I put the laptop down before you go take a shower at around 19:35, I assumed that its ok just close the lid and it would automatically go into hibernate mode or something similar (?) im wondering if that had something to do with it as I 19:53 would have been about when I came back and lifted the lid/screen again to use the laptop again... I can only assume, given the time, he cites, is what caused the failure?

  It gives me the option to "update driver software" and "hardware change analysis" in the Device Manager, can I run both, or one of those who maybe? is this a common problem? should I worry at all etc...

  Any help is very appreciated, if more info. Please let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics, I have an old version of Paint Shop Pro, which I installed it yesterday morning, it seems to install fine, it is Jasc Paint Shop Pro 7, I have also some programs of converter (for files vid, 3GP and other things), scan antivirus AVG, Spybot Search & Destory DBPowerAmp, FTP Commander, Quicktime and Real Player, pretty basic stuff like that, nothing, just my old photos and vid files I transferred from my old laptop XP to it, in my documents... I don't have all the Senior Games motorized or complicated or anything else like that installed. Also at that time, indicates the video hardware error message, everything that was in progress when I got the cover down (or before putting the lid down) would have been Windows Live Messenger (although I'm pretty sure that I registered before putting the lid down) and an IE window , im pretty sure that's it, I was not working on anything just check the ' net...

  There are other things I noticed as I thought that maybe I should mention (?), something I've noticed he's doing is the screen goes blank and then back very quickly, a lot. I already asked about it a day or so there at that time, I realized he was only doing that before loading the "Windows needs your permission to continue" window/message, who apparently its supposed to do and something to with the computer to switch to display the normal desktop to the secure desktop, I kind of understand lol.
  So I think that's not something to worry about but I noticed during the lastday, that the screen seems to do it more, goes blank then back again, even if the authorization message does not appear.

  For example, this morning, when I first put on and am went to check out my home page, I clicked on a link at the bottom of the page or anywhere where to load another page into the site and display deleted for a while before coming back a second later with the requested page. Is this normal too? or an associated Vista glitch, or is it possible that there may be a small problem with the monitor? Incase of im guessing it can be more than one thing in Vista, but I thought I would ask here, I decided to not pay for any extra insurance/warranty extension because I am very careful with my items and take care of them and so I'm being careful to try to spot defects early, while they may be repairable under the basic warranty and what-not...

  Another thing I noticed is that start with, when I pressed on and kept the 'FN' key, a variety of icons, black and white appeared on the screen that told me what F button (s) to use to make certain adjustments, there still is that when I try right now, but at other times, it does not show icons , no matter how long I hold down the "fn". That didn't matter because I can tell by the symbols on the keyboard press what buttons but its just inconsistent, is there a reason why sometimes the row of icons on the screen will appear when I press and hold the "FN" key and other times it doesn't show at all?

  Also sometimes if I move the slider to the right to the top of the screen, these icons loading as they always seem to be located at the top of the screen, but sometimes it's a problem, if im trying to click on something else and one of these icons rises instead... I'm sure that you can disable this option in sort , but I'd be worried that the icons do not always show when I press and hold the right Button (?) just try to be careful!

  I think that this post is long enough and I don't see what else I could possibly add to help, so I'll leave this here. I don't want to sound too paranoid, but thought it is better to talk about this kind of things incase someone recognizes these defects/errors and can recommend a way fast to resolve potential problems before they can develop into what whether it is worse... Thank you very much in advance for any help on any of these issues!

  (mods let me know if im wrong to include so many things in a subject, I fact kind of this quickly and I apologize if im breaking any rules, I don't want to, if possible please break this into a few different themes or I can do it, although ill be at work frm 2-21:00 today so maybe not back and able to check here until Thursday morning (October 4))

  Hey Isla

  Your message is really very, very long. I think it's too long to read twice ;) s

  . Regarding your questions on this laptop well. Looks like you have installed many applications and 3 third party programs. In such cases, it s not easy to say if these problems are software or hardware related. But I guess that its software.

  I checked your screenshot pic, but I've never seen this error message. But it looks like something wrong with the graphics driver. The message says something, live events of kernel
  The core services are required by other parts of the operating system as for example graphics card driver.

  In this case I recommend updating the graphics driver. According to you, this message an Intel GPU. So you can see the Intel page for the driver for the graphics chip compatible.

  With regard to the key issue of the FN;
  The Toshiba FlashCard utility controls the key features of the FN. I read in this forum that this application does not smoothly run and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The utility of FlashCard is a part of the Toshiba value added package.

  So finally a tip more:
  You should always check the updates of Vista on the Microsoft page. This operating system is not perfect and Microsoft releases hotfixes and patches very often

  I hope that it would help a little.

  If necessary just ask for more information :)

  Concerning

• Several Analyses in Terminal

  I run several analyses in Terminal (OSX 10.10.5; 8 GB RAM) and wonder how best to distribute my computing power. If I want to run 4 analyses, should I open 4 windows separated, or a window with 4 tabs? Also, can I know how much RAM / CPU is used by my analysis? I have 9 total analysis and do not know if I should run them at the same time or successively or 4-5 at a time. I guess analyses I have running, longer it will take to complete each analysis. Is this correct? Does anyone have advice for me? Thank you.

  should I open 4 windows separated, or a window with 4 tabs?

  No difference.

  can I find out how much RAM / CPU is used by my analysis?

  Yes, in the activity monitor.

  I have 9 total analysis and do not know if I should run them at the same time or successively or 4-5 at a time.

  Assuming that each task is single-threaded, you must run as much as you have some processor cores. You can determine which of the "presentation of the material" in the information system.

• The analysis of the Variables of e/s channel properties

  I have a situation in which I would like to configure the Daq on a cRIO since an interface of configuration on a Windows host. In particular, I would like to get IO addresses Variable for all analytical engine channels configured on the cRIO. The Setup program runs on the Windows host and impossible to deploy any demon on the RT which could question the material. He needs run as if the cRIO is not present.

  The configuration program is part of the same project as the cRIO, so my thought was to analyse the project to find corresponding topics. Here's a post that does something very similar:

  https://decibel.NI.com/content/docs/doc-16630

  However, this has several problems. This example was written in 2011. I am using 2015. Apparently, the properties have changed since then. Children' find' (it is no longer named "children []") does not give me the chassis on my 9068 reference. Instead, I could use the property "Items Owned []", which gives a bunch of things, and then I search the TypeString of these things until I have find one that is "Chassis". Fair enough. Then the ref chassis gives me the Modules and the Modules of give me the channels. Seems pretty good. But all I get are the names of channel. I can't find all the properties that define the type of module or the direction of IO. For example, I would like to know if a variable is a Boolean or real, and if it is a path of entry or exit. You can deduct that the names 'standards', if the project has not been changed to allow giving them a meaningful name to create or. But it looks like there should be a way to find these properties directly.

  Any ideas?

  TIA,

  DaveT

  I think that the analysis of the project tree is a quite fragile strategy that you should know already. AFAIK the OR sanctioned for this sort of thing for a few years now is to use the API of the System Configuration. Yes, it's a pretty involved API and need you a little time to learn how to get the specific information you are interested in. Fortunately there are some examples that you can use to start with.

• The analysis table of Boolean in FPGA

  Hi all

  Although I programmed in LabVIEW several times, I am quite a novice when it comes to programming on an FPGA, and I learned that I will (which, so far, has worked with little problem).  However, I have solved my most recent problem and more I read on the FPGA, less certain I am that what I try to do possible.

  The task is to read in a number of bits of the digital input/output lines of the FPGA and the analysis of these bits in specific words / "bytes."  For the application of the VI that I have attached, I rigged reading in a certain number of bits by providing three words of 26 bits (for a total of 78 bits) that have been defined on the front panel.  After providing the bits specified, I try to analyse the bit array in the specific words that are given by the following logic:

  1. find a start bit of 0 (false bit).

  2. once the start bit of 0 (false bit) is the word that seeks to analyze is the next 10 bits.

  3. after the start bit and 10-bit of data is a 1 (true bit) stop bit.

  4. Repeat steps 1-3, five times.

  The logic above, should be six words analyzed in total for the provided VI.  Unfortunately, I can not simply take 12 bits (1 start bit, 10 data bits, and 1 stop bit) at a time, as the number of bits of padding between successive words is variable.  The VI I provided is a version of how I proposed to perform the logic above, but I can not compile the project/VI, I get constantly mistakes "Tables to be fixed size."  To my knowledge, all the tables in the VI have been allocated in advance, and seems to be deterministic.

  If anyone has any suggestions as to why this VI is not compiled, I would greatly appreciate.  Thank you in advance for taking the time to look at it, and I look forward to resolving this issue.

  With gratitude,

  Gregory

  Unfortunately, you'll have to rework this VI to run on an FPGA.  You cannot move tables in memory in an FPGA the way you can on a PC.  You have an array of variable size as the exit to remove the table, because the entry of length is not fixed at compile time.  In addition, two-dimensional arrays are not allowed.  Remember when coding for an FPGA you actually write the material - each value in a table is basically a circuit (that's my oversimplified understanding).  The compiler cannot affect the right number of sons to carry a table if it cannot determine the size of the array.  The table is not in memory, so there is no way to reorder running.

  There are two ways you can work around this problem, which will require an iteration through each element of the input array.  You could use a FPGA FIFO and just put the values in the FIFO which are given (that is to say, in a loop until what you have touched a start bit, putting the next 10 values in the FIFO).  Then across the FIFO, possibly in a separate loop, read 10 bits at a time to get your words out of data.  Another approach is to reorganize the table as you go.  Keep track of the current location in the input array.  When you hit a start bit, away from the 10-bit (you may need to do this one at a time) to the current location in the input array, incrementing the current location every time.  When you have completed all entries, all data will be at the beginning of the table in units of 10 bits, which you can split out as needed.