Best way to accomplish adding navigation based on securities (cfinclude)

Similar Questions

• best way to create a table based on another table

  Hello
  I am trying to create a table based on another table with all the data in it. It contains important data.
  
  create table < tablename > select * from table1.
  
  Is the best way to do it, or is there another way. Please advice.
  
  Thank you

  Insert / * + append * / in as select * from ;

  It should be->

  insert /*+ append */ into 
  select * from ;
  

  Kind regards.

  LOULOU.

• Best way to select distinct values, based on another column?

  I have a table with three columns: id (NUMBER), data_dt (DATE) and data_value (NUMBER).
  There is a primary key id and data_dt.
  
  I want to choose the folder with the last data_dt for each unique identification number.
  
  What is the best way to do it?
  I have three different methods, but there may be something that I am missing.
  
  First of all:

  SELECT *
  FROM
  (
    SELECT id, data_dt, data_value,
           FIRST_VALUE(data_dt)
           OVER (PARTITION BY id ORDER BY data_dt DESC) AS last_data_dt
    FROM the_table
  )
  WHERE data_dt = last_data_dt;

  (I use ORDER BY... DESC, instead of just ORDER BY I don't need the clause BETWEEN the LINES)
  
  
  Second:

  SELECT t1.*
  FROM the_table t1
  JOIN
  (
    SELECT id, MAX(data_dt) AS last_data_dt
    FROM the_table
    GROUP BY id
  ) t2 ON (t2.id = t1.id AND t2.data_dt = t1.data_dt);

  Third:

  SELECT t1.*
  FROM the_table t1
  WHERE t1.data_dt =
  (
    SELECT MAX(t2.data_dt)
    FROM the_table t2
    WHERE t2.id = t1.id
  );

  -Don

  As mentioned in hoek, you will need to test all scenarios.

  However, in my opinion the more faster will be those who accesses the table that only ONCE instead of TWICE as some scenarios require.

  HTH!

• Best way to do the math based on the drop-down list box selections

  I've set up a timesheet that employees choose in two different drop-down fields which department they worked in and what station they worked at for each section start and end time. What I'm trying to do, is to have a summary table on the bottom of the timesheet which calculates the time spent for each combination.

  

  Departments are N & S, P and so our stations are WN, ZO, LR and FM, the table would look like this:

  	WN	ZO	LR	FM
  N & S
  P
  A

  I have three sections of the hours of beginning and end with each of them their time in separate fields called M1, M2, and M3 calculation.  What I'm trying to implement is an if statement for each cell in the table. For example:

  If 'deptmonday1' = N & S and 'stationmonday1' = WN

  then x = M1

  and

  If 'deptmonday2' = N & S and 'stationmonday2' = WN

  then y = M2

  and

  If 'deptmonday3' = N & S and 'stationmonday3' = WN

  then z = M3

  If cell 'WNN & S' = x + y + z

  Can someone help me with the script for my if statements or y at - it an easier way to understand this? I use Acrobat Pro.

  Code custom for "WNN & S" calculation:

  var x = 0;

  var y = 0;

  var z = 0;

  If (this.getField("deptmonday1").value == "N & S" & this.getField("stationmonday1").value == "WN")

  x = Number (this.getField("M1").value);

  If (this.getField("deptmonday2").value == "N & S" & this.getField("stationmonday2").value == "WN")

  y = Number (this.getField("M2").value);

  If (this.getField("deptmonday3").value == "N & S" & this.getField("stationmonday3").value == "WN")

  z = Number (this.getField("M3").value);

  Event.value = x + y + z;

• What is the best way to Sync Output (TTL) digital with analog output?

  I'm trying to generate analog signals that synchronize the rising edge of a digital signal (TTL). The ttl will be the trigger for the camera. The advice I have is USB-6343 X. In my project, I used a clock as a ttl so I can give frequency easily. Could someone tell me what is the best way to accomplish this task? My project seems to work, but I hope it has more neat way. Thanks in advance for any help!

  Kind regards

  Eric

  Hi Econg,

  They should be nanoseconds, if any, there is a trigger of material goes with a hardware clock.

• best way to make the guests timeout?

  I use MX 2004, and I need timeout voiceover guests. What is the best way to accomplish the timing? I used onEnterFrame countdown timers, but, but I had mixed - they do not have to be too precise, just working with a few predictabillity. I also fear that using onEnterFrame can slow things down too.
  
  I tried to use setInterval directly and have the time range to clear himself, but it didn't. I also tried setTimeout function of Senocular who uses setInterval, but it works only once, same kind of thing, I've tried in simpler form. I tried different things and now I'm all confuzzled - they sometimes work and sometimes not. I should probably start from zero (new), but times are looming and I can't think straight - I'm just a little thrasing autour - I also tried a 'status quo' loop, but then I get a "slow script" warning
  
  I think part of the problem is that I have a voice-over as guests and they are not finished at the time that the interval is disabled. I have them preloaded in a swf file and load the film like this.
  
  The tips are greatly appreciated, TIA!

  setInterval() always works and is fairly accurate, except if you need nearby 10 accuracy Ms (in which case you can fix setInterval to maintain the precise timing).

  any problem with your intervals of compensation is a problem coding and encoder.

• Adding buttons to several frames - is the best way to do it?

  In CS5, I want to create a series of buttons which when clicked will be linked to other images in the same timeline. So a button will connect to the frame 5, it will connect to frame 10, it will connect at 15, etc. All buttons appear in the upper part of the stage on a layer, and I want them to appear on all frames so that the user can click in the back-and-forth to the different frames/screens.

  1 is the best way to do this for just add buttons to frame 1 and add a keyframe to the last frame in the timeline, the frame of 15, while they are copied in all images between the two?

  2 are there problems to do it this way?

  Thank you!!!

  Just have one image key frame 1 and extend to frame 15.  Don't need/want an another keyframe at frame 15.

• Best way to measure accurately the activity of hiking on Apple Watch

  I use my Apple Watch with watch OS 2.2.2 paired with an iPhone on ios 9.3.3 6 and ask what is the best way to measure the calories during the hike. I currently use the app to drive and walk outdoor activity type, but it seems that the market with more than 30 pounds on the back should burn more calories than the market alone.

  It would make sense to increase my weight of 30 pounds (or whatever the weight of the package is that day) in community health for the market or is there another solution to workaround that would suffice?

  It would be great if a later version of workout app had a hiking activity or hiking with a place to specify the amount of extra weight in a pack or vest or even just an option for additional weight to the open-air market.

  Thank you!

  tcpsoft wrote:

  It would be great if a later version of workout app had a hiking activity or hiking with a place to specify the amount of extra weight in a pack or vest or even just an option for additional weight to the open-air market.

  If you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

  (You do not speak to Apple here - it is a community based on the user).

• Best way to limit the iOS devices?

  What is the best way to limit the compatibility of my AIR application so that users with the iPhone/iPod 1st-3rd generation cannot download it from the app store?

  I am about to submit my AIR application for Apple app store & have designed so that it works well on iPhone/iPod 4 + and all iPads. So, I would exclude users with older iPhones/iPods of the possibility to download it.

  I searched online and a number of people suggest adding a restriction based on requiring front facing camera.

  that is, adding the following line in the info.plist file:

  <key>UIRequiredDeviceCapabilities</key><string>front-facing-camera</string>

  But, I read the posts of some people who have tried this and it worked: he did not exclude iPhone 3GS. See the last post here.

  Can anyone confirm that it is a reliable method? I understand there is a small chance Apple will reject your application based on the fact that you add an unnecessary exclusion - that is my app requires in reality a front facing camera.

  Also, I noticed that another approach is to restrict the version of the OS. If you want to restrict the minimum version of the operating system of 6.2, which should exclude iPhone/iPod 1st-3rd generation like iPhone 3GS not going only up to OS 6.1.6 I think.

  So, the solution would be to add the following in the descriptor xml file:

  <key>MinimumOSVersion</key>
<string>6.2</string>

  The 3GS is not compatible OS7 (OS6.1.6 I think is the last) then you can simply apply OS7.

  To do this, in your , you can specify as follows:

  MinimumOSVersion

  7.0

  
  

  Edit:

  
  

  Hey Yes, I see that you've done your homework. You can choose 6.2, but there is really no reason. iPad1 is locked in OS5 so you lose (very small part of the market) but the iPad2 and up supports OS7 and iPhone 3GS cut so 4 and below you really need to specify OS7 and up to. 6.2 would work as well. If you need support iPad1 so it is not ideal.
  

• What is the best way to create a bookmark for a user to return?

  Hello to all... hello again Steve... I'm back with another question - what is the best way to set up a bookmark system so return users can pick up where they left off in a lesson of AW? I tried the usual internet research, always do, but a few samples and answers I found were AW5, not a lot of help...

  I have a dozen or so cards attached to my frame, I would like a user to return to the last card that he read before the close. (My AW communicates very well with database Access, so if passing a variable to access and back to AW when begins the lesson is on track, let me know...) If the answer here is too complicated, perhaps pushing me in the right direction and I'll me dive in.

  Thanks in advance to all those who have some tips, I really appreciate it!

  Terry

  Try this overview, see if it helps...

  Enter a reference to the map as you enter, then save to the database when you exit.

  You want something that will give you the equivalent of a page number - if you have 7 cards hung the setting, and the user is in the 6th plan when it stops, you want to save the number 6.

  There are dozens of ways to do it, but probably the easiest way is just to attach a calc to each card that has this code

  (I do not have Authorwar very convenient to check the syntax, then you should check out!)

  BookMarkPage = ChildIDtoNum (IconParent (IconID), IconID)<-- tells="" authorware="" to="" return="" the="" "page="" number"="" of="" the="" current="">

  Save BookMarkPage in your Access database to the exit.

  In return, read the bookmark in BookMarkPage, ask the user if he wants to go back to the bookmark. If so, use a calculated navigation that uses

  ChildNumToID (@the of your frame name or its ID, BookMarkPage)

  Note that you could argue something similar by recording the your card, the IconTitle or IconID but these two can break if never update you your file by adding or removing pages, renaming etc. With this method, all you need is a simple page County check that makes sure you don't try to nav for a page number that does not exist (use IconNumChildren).

  Steve

• NB550D - best way to install Win 7 64-bit and 64-bit drivers

  Hello

  I improved my NB550D to Windows7 Home Premium and installed 4 GB of RAM.
  This works much better, but want to go further and make a Windows7 Ultimate _64bit_ _clean install_ in order to take full advantage of theupgrade in RAM.

  My question is: what should I do about the Toshiba drivers for 64-bit? I guess I'm going to need some?

  What is the best way to go about the upgrade - any help will be appreciated! : D

  If you need to switch to Win 7 64 bit, then you need some Win 7 64 bit drivers.
  On the European driver Toshiba page, I could find some 64-bit drivers, but it seems that not all Toshiba for Win 7 64-bit tools are released.

  Drivers for WLan or BT stack can be found here:
  http://APS2.toshiba-tro.de/WLAN/
  http://APS2.toshiba-tro.de/Bluetooth/

  Other drivers or Toshiba tools such as value added package or Face Recognition, Eco utility and others could be used with other series of portable for example by Satellite C660D or others such as L750D, L755D or C670D
  Surely you must pay attention to the integrated graphics chip, the LAN or the chipset
  Use the drivers that are released for fleas in NB550D

• What is the best way to collaborate on a project in logic at the same time?

  My brother and I collaborate on music, even though we live in different States.  We try to understand the best way to work on a project at the same time... not to live (although that would be awesome) rather by the project back repeatedly for multitracking.  Is there an effective way to send only the new audio files and a logical update file back instead of the entire project (which happens to be several gigs in size)?  It seems that there must be other people working together like this.  This seems particularly important when you mix when we are not adding a lot of new files, but making subtle adjustments to the mixture and arrangement.  All the tips are greatly appreciated.  Thank you!

  https://www.Gobbler.com/collaborationversioning/

• HP Pavilion Notebook e101sp 17: best way to charge 10 Windows with the laptop HP software (post regularly update 8.1-&gt; 10)

  My HP Pavilion 17 - e101sp Notebook PC (ENERGY STAR) came with preinstalled Windows 8.1. I later upgraded to Windows 10.

  Although I had Norton Internet Security installed since the bootups earlier, I still have some virus infections from time to time (discovered through runnin ClamAV from a Linux Debian partition, I put in place on the same computer) laptop. After the expiration of the 1 year subscription NIS (I had lost confidence in it right here...) I played around with a few other sollutions.

  In the end, I now have a Windows essentially not fixable (infected) 10. It's not scary for me because Linux is my main OS 'at home' for 15 years now. However, being the standard Windows "de facto" is it much, I still would like to have a copy of own work, installed.

  My question is, in the current scenario, as I mentioned, which of the two is the best way to have 10 Windows installed with all the goodies of HP, alongisde, my Debian Linux system? And what care I would create throughout the process?

  1 reinstall 8.1 can I leave HP recovery disks that I made at the beginning (and hope that does not erase the Linux partitions, I created afterwards - I need more than "hope" in fact, I need evidence-based knowledge on this one!). And then upgrade to Windows 10.

  2 install a Windows 10 fees (from DVD created from the .iso file downloaded from Microsoft), hoping that it activates properly with the key contained in the UEFI BIOS (I think that this 'hope' is pretty much made to knowledge database) and then get all the goodies of HP... by a simple download from the HP site?

  I think option 2 is the safest (and fastest also!) but I'd well informed comment before that I have try.

  Thanks in advance.

  Hello:

  Option 1 is the only way you will get to keep the programs provided HP with your PC, and they reformat the hard drive, so you will lose everything.

  Option 2 will put a clean install of W10 on your C:\Drive and you will be able to leave everything intact, unless you format the hard drive.

  If your current installation of W10 has been successfully activated, W10 will automatically activate once you install it again once you're connected to the internet.

  To install W10 in this way, you select the "I don't have a product key option,' when you get to when Windows asks for the prouduct key.

  The only software and you will be able to install the drivers which will be available on the page of the driver and support for your laptop.

• Best way to charge the battery

  Can someone tell me which is the best way to increase the autonomy?

  Is it a good idea to let the battery charge even after it displays 100%?

  Hi Matt,

  Please take a look at battery care discussions in this son...

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/how-to-protect-the-Yoga-13-battery/TD-p/1...

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/Z500-how-to-stop-using-battery-when-plugged...

  Zehn

• Programmatically update nested arrays of Clusters? (What is the best way?)

  I have an array of configuration files that is loaded at startup. Then, I need to update the values in this table of configuration values. The attached VI works, but I was wondering if this is the best way. It seems not scalable I added elements that I do need to update (mostly because the real configuration file has a lot more items).

  What is the best way to update an element of tables nested clusters?

  In this version shortened:

  When I click on "Set a new value" it should set the updated for the selected Config values #, # test, a subtest #.

  

  Back panel:

  

  Thank you!

  A better approach is to use the standard bundle/unbundle and the subset model table index table/replace. A component of Inplace Structure using simplified, as shown: