Best way to achieve this shadow effect?

Similar Questions

• I'm moving my files to workspaces to cloud.adobe.  What is the best way to achieve this?

  I'm moving my files to workspaces to cloud.adobe.  What is the best way to achieve this?

  Hi Traci,

  So big that you get ready for the transition to cloud.acrobat.com! Please see that the specified item was not found. For more detailed information on downloading your files.

  When you open a session workspaces, however, you will see a big red box at the bottom left. Click this box, and your files will be packed to the top for you. You will receive an email with the instructions when the packaged files are ready for you.

  Best,

  Sara

• I replace a website done previously before Page with a new site that I built in Dreamweaver, but wants to keep the URL address, what is the best way to achieve this?

  I replace a site is at the top with a new website that I'm building in Dreamweaver, but want to keep the same URL which is the best way to go about this?

  If you want to keep the same hosting provider, you have nothing to do. Just delete the old files of the site and download your new.

• What is the best way to achieve this?

  What is the best to do the following?

  Form1 lists items that have a cost value

  Form2 is a form of invoice

  What is the best way to export goods of a value of cost of form1 to form2?

  A user would be making selections of point in form1 and save the form, and then send it or export data.

  Then form2 would retrieve the selections point of form1 and display cost values that I can sum up at the end of the form2.

  Thanks in advance for any advice!

  Hello

  If both forms have the same objects to the items and the same names, then export to xml of form1 and import of xml in form2 should work.

  Data in the xml file that does not match the names of the objects to form2 will be ignored.

  In both forms, objects that you want to export/import must have their liaison, the normal/name of the object value > Bindings tab.

  Niall

• I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

  I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

  Hello

  Sorry, but you will probably need to rebuild everything in Animate. Although their timelines are similar in some ways, there is no interoperability between After Effects and animate dashboard.

  Kind regards

  Joe

• Best way to convert a shadow CMYK, grayscale only in a CMYK image?

  I use Photoshop CS6. I have a CMYK image of fruit on a white background with a shadow that has some cyan, magenta and yellow. The shadow is NOT AN EFFECT. It is part of the original photographed image shot against a white background. I want to turn the shadow in a percentage of black only. I've hidden the fruit so I white background and shadow isolated but now I don't know the best way to make the shadow a percentage of black only. Thanks for any help!

  Mike, who works very well! Thanks for the help you and John!

• How to achieve this simple effect?

  How to achieve this simple effect?

  Hi guys,.

  I just want to know what do you call the effect which the corners of the screen is blurred and darker, and how can we achieve?

  See the video in this link www.youtube.com/watch?v=lHj83FRR11s.

  Thank you in advance!

  Use a solid layer of the color of your choice then add a mask and change his pen:

  The effects coming from the photograph is called vignetting or vignnete

  Another way is to add a bright spot and animated, but its more difficult, I hope it works

• What is the best way to read this binary file?

  I wrote a program that acquires data from a card DAQmx and he writes on a binary file (attached file and photo). The data I'm acquisition comes 2.5ms, 8-channel / s for at least 5 seconds. What is the best way to read this binary file, knowing that:

  -I'll need it also on the graphic (after acquisition)

  -J' I need also to see these values and use them later in Matlab.

  I tried the 'chain of array to worksheet', but LabView goes out of memory (even if I don't use all 8 channels, but only 1).

  LabView 8.6

  I think that access to data is just as fast, what happens to a TDMS file which is an index generated in the TDMS file that says 'the byte positions xxxx data written yyyy' which is the only overload for TDMS files as far as I know.

  We never had issues with data storage. Data acquisition, analysis and storage with > 500 kech. / s, the questions you get are normally most of the time a result of bad programming styles.

  Tone

• Best way to film this scene, stitch together plates or green screen?

  I have a call where I walk past a player with him framed on the right of the screen, ' actor A. ' then on the shoulder 'Actor A' (on the left side of the screen) another character is in sight, "actor B." at the end of shooting the camera move to stop and I want at the speed of the actor 'A' of the ramp so that it revolves around very quickly While the 'B' actor maintains a normal speed (which is him walking toward the camera as well). Is the best way to do this shoot with two plates separate and assemble them (if if, what is the best way to assemble the shots)? Or is - this green screen actor 'A' or 'B' and add them in? Remember, the camera moves to the rear while the actor 'A' heading, when moving player 'B' is also in the shot. Ramp speed of the actor 'A' occurs once it stops (it will whisk around extremely fast), how the camera will also be stopped.

  You have a few options. Usually, I start a VFX shot by the thought of the movement of the camera. If I move the camera what are the problems that will result?

  According to your description, you have a dolly with two actors. Tracks camera, the first actor as the second player enters the scene, then the unit stops and the second actor continues to his notes at normal speed while the first actor is accelerating. Two shooting plates will give control the moment where the first actor, but, in view of the camera move, requires you to simulate accurately the moment where two follow-up plans so the point of view between actors is consistent. It doesn't matter if the photos are on a green background. For the view between the two actors to match the camera moves must be identical to the camera angle and the speed of follow up.

  If, however, you shoot all the action in a single pass while you can use rotoscoping to separate into two pieces shooting where the camera stops moving and then adjust the time where the first actor. This works easily if you make sure that you don't move the camera at all once the track ends.

  If the players do not overlap so the second option is a piece of cake because your roto can be a very simple rough mask. If the players overlap in the framework then your roto work will have to be very precise when the players overlap, and you may need to perform a few background replacement to fill in the holes.

  If you decide to do with two plates, then you will probably need to track movement. stabilisation and re-synchronization of two shots to make them at the height. If the camera is moving when you accelerate the first actor, you will have to keep track of movement.

  A final option is to pull the first actor on a green screen and the second player as a bottom plate and then follow and stabilize the two shots to try to combine them. Here again, if the speed and angle of the two plans that you combine are not identical or at least nearby enough that you can easily fix them you'll be in a lot of tweaking to than the shots work.

  If it were my project, I shoot the two actors in a single plug and then divided take it there where should be the first actor have the speed change and make a few roto work. That seems to be the most straightforward approach.

• Need HELP to get this shadow effect

  Hi all

  I need your advice. Sorry I don't know the name of this effect below therefore the scene I need help

  A man holds a flashlight illuminating a girl in the front (she is a bit away from him in an open field), now the shadow of another person walks between the torch and the girl. The shadow is being cast from left to the right end of the frame, falling on the girl, too, as it moves.

  How to achieve this effect in the aftermath.

  It may or may not be a question of amateur, but any help would be so useful.

  Please notify

  It is now much clearer. you need advice VFX before your shoot. You must have a shadow without the man, be there. I think you can go 2-way with this: shoot twice the place or go to the green screen approach. each with its own complexity and the advantages and disadvantages. I will describe the basic principles:

  Approach to location

  If you want to try to do on-site, you can:

  1. turn your scene with the man and shadow

  2. pull on the same stage without human and shadow

  3 mask man with the rotoscoping and tracking

  This might work if you have no movement in your scene. or if you have motion control of drilling that will exactly twice the same movement.

  The green screen approach

  your question - if you can touch a person out and make him a shadow on the floor - YES. It's the way I'm going to try to do - it's called a Shadow Catcher - a layer that only accepts your shadow. This might work with or without movement of the camera.

  Let's say you have this guy on green screen

  

  and you want to just its shadow on the background against

  

  Here are the steps:

  1 make the guy (layer locked) 3D and add a corresponding upstairs floor * in the actual shooting.

  floor - add you a solid, it make 3D, add the effect of grid and position it accordingly with a camera of 2 knot like that of setting

  

  2. Add a layer of light points and set the shadow, set the images captured in the shade and the soil layer to accept shadow - only and adjust the light

  

  Now you have this:

  

  3. check that everything is OK, now define the images captured in shadow - only

  

  Now you have just the shadow. You can adjust it to your taste with the darkness of the shadow and the diffusion in the properties of light spots

• Best way to implement this provision?

  I have this design which is currently in the form of Flash that I would do it again in html. I try to reproduce the same exact design with the following restrictions:

  -I want the design to stay centered horizontally, regardless of the size of the browser window.

  -I don't want no scrollbars on the browser window.

  This design was initially conducted during the years there are html and I have achieved this goal by using nested framesets. Each horizontal section of the design was in a frame. Something that does not look was when making a selection (on the numeric keypad) the image page loading in the white flash image section front of load the image page. I never found a way to avoid this. I certainly don't want that. In other words, each image is selected the background in the image section should stay black.

  Any suggestions for the way better, the easiest way to achieve the final result more transparent? I guess that run html and css standards allow a better way to do this? I intend to use Highslide to zoom in on the image.

  Thank you for any input!

  

  This is called a Flash of unstyled content (FOUC) to edit pages.  What you need is a jQuery (JavaScript) solution that keeps everything on the same page, so there is no FOUC.

  I also recommend jQuery Fancybox2 for window modal/Lightbox effect.  See examples below.

  http://fancyapps.com/FancyBox/

  Nancy O.

• What is the best way to achieve

  site is here
  
  just like a "shadow" on the content in the background, I have a picture that repats on axis y... is a film strip...
  
  That's my problem...
  
  I have the image of information defined as follows in the #wrapper div
  
  div #wrapper {}
  Auto margin: 0;
  URL of the background: black (.. / images/bgMainContent.gif) repeat-y;
  Width: 772px;
  height: auto;
  text-align: left;
  }
  
  in this way content what ever I fill the web page with the "film strip" repeat everything down...
  
  That's my problem...
  
  I have two div for my main now #bodyPic and #bodyContent content, they are set to float left and right back... (which are next to each other in other words)
  
  If I set a background color wil on tour 'film' effect... so what I do is to set a margin-left: 25px; #bodyPic and the margin-right: 25px; to the #bodyContent...
  
  the obvious problem is the box model problem... is there a way I can avoide using a margin on the divs #bodyPic and #bodyContent? and still have the free 25px on each side?
  
  the only way that I can think of is tranparent background value and add the trim to the elements inside the div
  
  for example if I have p in the #bodyContent I put the margin-right: 25px; for the #bodyContent p
  
  y at - it another way to do this?

  PROBLEM SOLVED

  div #bodyWrapper {}
  Width: 672px;
  margin: 0 25px;
  Background: transparent url (.. / images/aboutBodyPic.gif) at the bottom left no-repeat;
  }

  div #bodyPic {}
  Width: 232px;
  Background: transparent;
  float: left;
  }

  div #bodyContent {}
  margin: 0 0 20px 20px;
  Width: 420px;
  Background: transparent;
  float: right;
  }

• I'll do a clean install on a blank hard drive upgrade but want to keep my Firefox settings - what is the best way to do this?

  I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.

  Hello

  The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.

  Learn you more about the Firefox profile folder, how to backup and restore, here.

  I hope this helps, but if not, please come back here and we can look at in another option for you.

• What is the best way to detect this text is part of the ContainerControllers without scrolling?

  Hello.

  Question

  What is the best way to detect that the text typed by the user (or added programmatically) exceeds the available space container and find where the truncated part begins? There are others (as described below) highlights the easy way to detect or to prohibit controllers to receive more characters that can be displayed in the area of publication given?

  My attempt partially (Simplified)

  For example, lets say I have a textflow editable with joints two instances of ContainerController.

  
  

  var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
      firstController = new ContainerController(firstSprite, 100, 30),
      lastController = new ContainerController(secondSprite, 600, 30);
  
  
  flow.interactionManager = new EditManager(new UndoManager());
  flow.flowComposer.addController(firstController);
  flow.flowComposer.addController(lastController);
  
  flow.flowComposer.updateAllControllers();
  

  Vertical scroll policy enabled I can compare the height of the composition in the last controller with the height of the content:

  var bounds:Rectangle = lastController.getContentBounds(),
      overflow:Boolean =  lastController.compositionHeight < bounds.height;
  
  trace('Content does not fit into given area?', overflow)
  
  

  But when I change of vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF)-Unfortunately this does not work anymore... (In my case scroll must be disabled, since the text boxes can have only one line with narrow width)

  Use cases

  I want to create the form to fill out. Field can have one or more lines. A field could start in the middle of the page, continue in the following line, where it spreads throughout the page and put an end to the third line - long quarter of the width of the page. Text typed by the user may not exceed given the region since it could cover some static text that is located just after in below field.

  Something like ascii image below:

  --------------------------------------------
  |                <PAGE>                    |
  |                                          |
  |                                          |
  |                                          |
  |               [Field starts here........ |  
  | ........................................ |
  | ........................................ |
  | Ends here..]                             |
  |                                          |
  |                                          |
  | [Another field] xxxx  xxxx xxxxxxxx x xx |
  | xxxxxxxxxxxxxxxxxxx                      |
  |                                          |
  |                              [One more.. |
  | .....]                                   |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  |                                          |
  --------------------------------------------
  

  Info:

   [......]  <-- form fields starts with '[' character, and ends with ']'
   xxx       <-- sample, static text
   | and _   <-- page borders
  

  If you want to detect the overflow in the final container, there is another thread discussed before.

  http://forums.Adobe.com/thread/795264

  You can detect it with lastContainerController.absoluteStart + lastContainerController.textLength «»<>

• Advice: Best way to do this?

  I have a DataGrid with data of the user base inside and the last column contains a check box as a driving force for rendering.

  Let's say there are 10 lines, and I deselect the checkbox for each line. At this point, I need to disable a certain button.

  What is the best method of practice for this?

  In addition, the data sets that I will fill in the grid with, via PHP/XML can return thousands of lines. What is course several lines of the data grid, so I can set a method of paging?

  Thanks for any help.

  I guess your dataProvider of the DataGrid's ArrayCollection collection. In this case, you must write a function that runs when you click on the box in your last column. This function checks the source of your ArrayCollection collection, which is an array. Look at the 'all' functions in the Array class. This function checks each item in your array until false is returned.

  ... Runs a function to test each element of the array until an item is reached that returns false for the specified function. You use this method to determine whether all the elements in an array meet a criterion, such as having values less than a number...

  Let me know if you cannot understand it yourself, so that I can make an example.

  I do not know the limit of dataGrid rows, but it is advisable anyway to use pagination, once you have a bunch of files! You can use the ArrayCollection collection such FilterFunction property to achieve this quickly!

  d