Best way to reduce the overbroad designed global site pages

Similar Questions

• What is the best way to create the layout for a single page website in Adobe Muse?

  I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

  You can have access to this tutorial (and their other) a month for only $9.99. Is it too expensive for you!

• Best way to reduce the volume of the music when people speak?

  Hi, I have do this promo video which is mainly music... but there are pieces where people speak to the camera, and I need to slightly reduce the music. I usually use keyframes on the waveform, but it's quite of your time, and if I edit the video in the future, audio keyframes align properly. Just wondering if there was any easier way to do it. Thanks, Neil

  Easier way and the industry standard is to use the Audio Mixer Panel...

  The organization track mixer automation and wil a create keyframes in real-time for a live mix.

  @the OP... It's a question of riding of the mixer, keeping an eye on the meters and using your ears.

  Mixing live is also easier if you are familiar with your editing and have an idea where the dialogue starts and ends.  Of course, your video helps with that.

• Best way to reduce the captured elements?

  Sorry if this has been asked a thousand times, but I do not see in the FAQ.

  I have a Canon Vixia camcorder HD capture and stored in the AVCHD format, once I drag video clips on my computer. They look great on an Apple Cinema Display 30 "monitor.

  I'm looking for the best way to go through the video clips of my guardian and cut each end of the segment to get rid of unnecessary images and now the part of the clip I think that I would ever use. In fact, I know how to cut the picture, I'm looking for better work flow through a lot of long clips and cut down and save for long-term storage without losing any quality of image.

  If I have registered 100 clips that can each be shortened, what is the best workflow in first Elements 8? That format and output settings would be best?

  Original Canon files were saved with extensions MTS on a PC. My few tests registered tonight shortened as M2T files. In the initial run through, they seem to have the same image on my screen quality.

  Any help would be appreciated.

  Mr. Jackson

  Yes, you can load all the clips in the same project and then prune one at a time on the timeline, M.

  In fact, it is probably the best solution!

  If you are using project settings appropriate for your source footage, share your built in 1440 x 1080 MPEGs video should give you virtually no change in video quality. Certainly nothing notable.

  You will then be able to load these video clips in a project implemented for HDV video formats and they should work great!

• CS6 IND - best way to reduce the size of the exported pdf.

  Does anyone know a game existing instructions or discussion on reducing the file size of the pdf files exported from InDesign CS6? I want to keep my documents at 300 dpi for printing purposes, but do nothing else that I might be able to in order to keep the size of the file at the very least. Thank you!

  Hello

  First at all you can try are:

  -export .idml .indd

  d ' open in

  -to export it to .pdf

  2-digit percentage in size reduction is likely (varies according to the file history)

  Rgds

  Jarek

• What is the best way to reduce the time in a WCC 11.1.1.8 to 11.1.1.9 update?

  I have a requirement to get a zero down time upgrade from the COE 11.1.1.8 to 11.1.1.9 in an environment with a cluster of 6 knots. From what I see in the documentation, it can be very difficult; If someone who has done this upgrade has all the lessons learned on how to optimize in order to minimize the downtime that I would really appreciate it.

  If you can afford to create a second copy of your production environment (both compute power and storage), you could be close to no interruption of service.

  (1) with your DR procedures create the second copy of your environment, and restore your data it

  (2) use the process that amey g called to upgrade the second environment

  (3) your new test environment (you'll almost have the same data, only missing will be those created/updated day after taking backup in #1).

  (4) use the archiver utility to export/import the missing data to the new system

  (5) to redirect users to the new system

  It's only the steps #4 and #5 which cannot be done at the same time, and only #4 can take some significant time. If you have a large amount of data the archiver would have to be synchronized, you can consider other tools such as GoldenGate, rather than of the archive.

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• Once combine files, it is too large to e-mail. Is there a way to reduce the size of the file?

  Combine files and now it is too large to send. Is there a way to reduce the size of the file converted into Adobe?

  Hi yodonna,

  Adobe Reader does not reduce the size of a PDF file, such as Acrobat. But, you can download this file to your Acrobat.com account and create an anonymous link using Adobe send. Then you can send this link by e-mail. You can access Adobe send to https://cloud.acrobat.com/send. Create an anonymous link function does not require that you have an Adobe membership send.

  Best,

  Sara

• Best way to limit the iOS devices?

  What is the best way to limit the compatibility of my AIR application so that users with the iPhone/iPod 1st-3rd generation cannot download it from the app store?

  I am about to submit my AIR application for Apple app store & have designed so that it works well on iPhone/iPod 4 + and all iPads. So, I would exclude users with older iPhones/iPods of the possibility to download it.

  I searched online and a number of people suggest adding a restriction based on requiring front facing camera.

  that is, adding the following line in the info.plist file:

  <key>UIRequiredDeviceCapabilities</key><string>front-facing-camera</string>

  But, I read the posts of some people who have tried this and it worked: he did not exclude iPhone 3GS. See the last post here.

  Can anyone confirm that it is a reliable method? I understand there is a small chance Apple will reject your application based on the fact that you add an unnecessary exclusion - that is my app requires in reality a front facing camera.

  Also, I noticed that another approach is to restrict the version of the OS. If you want to restrict the minimum version of the operating system of 6.2, which should exclude iPhone/iPod 1st-3rd generation like iPhone 3GS not going only up to OS 6.1.6 I think.

  So, the solution would be to add the following in the descriptor xml file:

  <key>MinimumOSVersion</key>
<string>6.2</string>

  The 3GS is not compatible OS7 (OS6.1.6 I think is the last) then you can simply apply OS7.

  To do this, in your , you can specify as follows:

  MinimumOSVersion

  7.0

  
  

  Edit:

  
  

  Hey Yes, I see that you've done your homework. You can choose 6.2, but there is really no reason. iPad1 is locked in OS5 so you lose (very small part of the market) but the iPad2 and up supports OS7 and iPhone 3GS cut so 4 and below you really need to specify OS7 and up to. 6.2 would work as well. If you need support iPad1 so it is not ideal.
  

• Best way to combine the 8-bit and 16-bit image files?

  I produce large photographic reproductions combining my own photo images modified RAW 16-bit with 8-bit stock photos and 8-bit of photoshop work. I used just reduce my photos from 16-bit to 8-bit and then change my image composite 8-bit, but I stumbled on the banding and other problems in the color gradients, I created later in my composite image.

  I want my composite image at 16 bits to get more specific and better degraded colors. What is the best way to bring the image to 8-bit files in my composition and maintain the best quality? Is it good to convert images to 8-bit to 16-bit in PS, before you import it? I've also heard bringing 8-bit images as smart objects? Thanks for any help on this.

  Even when there is no need to convert the document to the item in 16-bit mode is not.  If you need all the layers to adjust the image of the element to be light or mix better, it's better you have two choices. Do not open the file of the item in Place as a smart object layer and then open the embedded object and change the copy of your document.  Or open the target document element all the layers and then drag the document you are working on.

  The second way would produce a larger file of the document then the smart object layer way. For all layers will be 16-bit color. When the layer of integrated dynamic object is a copy of an 8-bit image file only the composite made of pixels of the object is to convert 16-bit mode.  A smart object layers pixel is like a whose pixel raster layer cannot be changed only acted on.  To change the pixels, you need to open the embedded object and modify the object.

  If you do not need the layer, you can simply drag into those that you need.  Yet once, there is no need to convert the document to the 16-bit mode, Photoshop element that will be in any copy of drag layers.

  When you use Photoshop how to think or what Photoshop just make how he could do. Shortly after, you will have a better understanding of what is happening.

• Best way to get the content of the 1 page in a lot?

  Hi everyone - I just wanted to check with experts on the best way to get information from 1 html page.  For example, I have a page that shows every 1 '' Ribbons that we have in stock to be used on sandals, belts, bags, etc. dog collars;  (http://elizab.com/eb-1-inchribbons.html) I can do an iframe to pull this html page 1 to all others?  What is the best way to do it?

  Basically I just have to update only one page html (tapes 1 ") and then it is good on all other pages, instead of having me to go through and to update every page that uses ribbons 1" :-)

  I'm not sure what is always taken in charge and what is not recommended on this!

  Thank you-

  Use an SSI. Server Side includes. It's better than an iframe. Google for server-side includes.

  Usually, I use php for inclusions on server side, but your server must support php. If not, you can use .shtml server-side includes.

  You need only to update and download only one file when you want to make changes. So on what page/s you have included the SSI these pages updated as well.

  Although I am a little confused because your field of design takes a page in its entirety. How do you intend to include all of the information on other pages without doubt that contain other information as well?

  I guess that if you only have a small area in which to display all the different designs on your pages, then an iframe is probably the best solution for your because you can define its dimensions.

  Personally I would get really "upset" if I have to keep scrolling left and right and top and bottom, then maybe if you go the route iframe you can arrange at least all the vertical stripes so we don't have to scroll up and down or break designs down into smaller categories to its more manageable for the end user.

• Need help: best way to exchange the Ipads?

  Dear all,

  Need help a genre:

  I use Ipad Air2 and my father is using retina Ipad Mini... I gifted him before 2 years...!

  We thought to share the Ipads because he loved the biggest... Can someone guide what is the best way to swap the parameters of the iPad?

  It is by taking backup and restore from Icloud? There will be data loss? or anything else that needs attention (something that he needed to be reconfigured)?

  Any help is very appreciated!

  Make a backup of each individual iPad. Use your own accounts: How to back up your device using iCloud or iTunes - Apple Support

  Import your photos from each iPad: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

  Then do it on every iPad: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then restore the backup in your 'new' ipads: restore your device from an iCloud or iTunes backup - Apple Support

  If the ipads have the same size of storage with the same iOS version, it should work fine. -AJ

• best way to clear the cache on an iMac 2011 - el capitan

  best way to clear the cache on an iMac 2011 - el capitan

  The best way is not for everyone. Clear the caches unnecessarily makes your computer run more slowly while they are rebuilt. Did you have a specific problem that you thought that clearing cache can solve? If so, post on the real problem.

• What is the best way to use the Y50-70 battery please?

  I bought the laptop y50-70

  but I want to know what is the best method to use the battery.

  and the best way to recharge.

  NOTE *.

  IAM always use the cable and I gave the battery except a few times.

  Thank you very much..

  Best way to use the battery, if your laptop should ALWAYS be connected in-

  Go to eat energy Lenovo - should be a RED icon in the system tray - and choose the mode for a better health of the battery (or battery Protection or health of battery optimized mode).

  I don't know what the energy Manager version you have, but the option must seem similar. What it does is, it will keep your battery charged ONLY up to 60 percent and will increase its service life.

• Photon: Best way to snap the back cover in place?

  What is the best way to put the cover back on? What sequence I use, it seems that one of the plastic snaps is not committed.

  There are instructions inside the battery cover. You start at the bottom and work your way up to the left and the right. That being said, check the clips on your lid and make sure that one of them is not folded. This happened to me the first day I bought the phone. I had to get a new one from the Sprint Store. Do not force the clip if it is wrong. I think that's how mine has folded.