Best way to replace a server VM?

We have 5 vm servers in different subnets, all with their own databases on the virtual machine to themselves. I Vsphere controlling each of them and I am licensed only for these 5. I want to take a vm server and replace it with a new one. Displacement of the warehouses of data, etc. would be impossible because the virtual machine is in a subnet different and who would throw everything off the coast. If I had 6 licenses it would be easy, but we do not have.

What is the best way to handle this?

In fact, you have an additional license for it. Once you install the new host, it will run in evaluation mode for 60 days allowing you to add the host to your vCenter server environment and migrate all virtual machines. Once done remove the old host and assign Freedmen to license to the new host.

André

Tags: VMware

Similar Questions

What is the best way to replace an Appasure Agent with hardware new and new computer name?

What is the best way to replace an Appasure Agent with hardware new and new computer name?

Thank you that's what I needed

What is the best way to move another server Vcenter Server?

Hello
We have 3 nodes VMWARE running with VSpere 4.0.0 and a Vcenter Server 4.0.0. The server running the server Vcenter on disorders gives and must be replaced. What is the best way to move the VCenter server on the new server and keep all the settings?
And is it possible to update at the same time to VCenter Server 4.0.1?
Thank you
Marcel

There is no problem, I also think that it is the best way if you do not have a large environment - usually takes less time :-). Remove first the hosts of the other vcenter - this will make the vcenter agent to be uninstalled from the ESXs.

Marcelo Soares

VMWare Certified Professional 310/410

Master virtualization technology

Globant Argentina

Review the allocation of points for "useful" or "right" answers.

dial of the watch is damaged; best way to replace it?

Hello

I damaged my dial and need to replace. What is the best way to get it replaced?

Hello

Contact Apple support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:
Prices for the United States information service, for example, are available here:
- Apple Watch Service pricing - Apple Support

Best way to get vCenter Server VM

I would like to spend our vCenter server from one physical machine to a virtual machine.
What is the best way to go about this?
The current Server vCenter running Server 2003 R2 Standard x 64 Edition with SP2.
I want to move it to a virtual machine running Server 2008 R2.
I don't have something special, installed with the server vCenter Server. Running Essentials Plus licensing.
2 host ESX 4.1 with one on the way. New host will be ESXi 4.1 update 1.
Thanks in advance.

The sysprep files if you use the converter will go on the client in which you are running the converter from.

Here's a link KB with all the sysprep files.

Sysprep file locations et versions (1005593)

[8i] best way to replace the 'similar' value values...?

Some examples of data:

Sorry for the large / complex set of sample data, but there should be no need to go through it in detail =).

2 things to keep in mind:
(1) it is a 8i db
(2) I can't create any tables in the db, if I can create views

CREATE TABLE     ord_master
(     part_nbr          CHAR(25)
,     ord_nbr          CHAR(10)
,     sub_ord_nbr     CHAR(3)
,     ord_type          CHAR(2)
,     ord_stat          CHAR(2)
,     date_closed     DATE
);

-- please note, though none of the columns in ord_master are explicitly defined as NOT NULL, 
-- none of them are NULL in the db, and given how things are input into the table, I don't 
-- even think it's possible

-- a unique order is described by ord_nbr, sub_ord_nbr.  there should only be one record in
-- this table for a given unique combination of those columns, though they are not the p.k.

-- NOTE: dates default to 12/31/1900, so in the table above, if an order is still open (thus, 
-- not closed), it's date_closed will be 12/31/1900.  It will only change once the order closes.

INSERT INTO     ord_master
VALUES     ('ABC-123','1','1','AA','CL',TO_DATE('05/01/2009','mm/dd/yyyy'));
INSERT INTO     ord_master
VALUES     ('ABC-123','1','2','AA','CL',TO_DATE('9/14/2009','mm/dd/yyyy'));
INSERT INTO     ord_master
VALUES     ('ABC-123','2','1','AA','CL',TO_DATE('12/03/2009','mm/dd/yyyy'));
INSERT INTO     ord_master
VALUES     ('ABC-123','3','1','AA','OP',TO_DATE('12/31/1900','mm/dd/yyyy'));
INSERT INTO     ord_master
VALUES     ('ABC-123','4','1','AA','CL',TO_DATE('03/12/2004','mm/dd/yyyy'));
INSERT INTO     ord_master
VALUES     ('XYZ-123','5','1','AA','CL',TO_DATE('03/12/2004','mm/dd/yyyy'));


CREATE TABLE     op_detail
(     ord_nbr          CHAR(10)
,     sub_ord_nbr     CHAR(3)
,     major_seq_nbr     CHAR(4)
,     wctr_id          CHAR(5)
,     oper_stat          CHAR(2)
,     plan_su_rsrc     NUMBER(5,2)
,     plan_run_rsrc     NUMBER(11,8)
,     plan_subc_amt     NUMBER(15,5)
,     act_su_rsrc     NUMBER(5,2)
,     act_run_rsrc     NUMBER(7,2)
,     act_subc_amt     NUMBER(15,2)
,     act_start_dt     DATE
,     dt_completed     DATE
,     qty_planned     NUMBER(13,4)
,     qty_recvd          NUMBER(13,4)
,     qty_complete     NUMBER(13,4)
,     qty_scrap          NUMBER(13,4)
,     qty_on_hold     NUMBER(13,4)
);
          
-- similar to ord_master, thought none of the columns are explicitly defined as NOT NULL, 
-- none of the records have NULL values for any of these columns, and I don't think it's 
-- really possible with the way the system is

INSERT INTO     op_detail
VALUES     ('1', '1', '0081', 'X516 ', 'CP', 0, 0, 0, 0, .2, 0, TO_DATE('02/03/2010', 'mm/dd/yyyy'), TO_DATE('02/03/2010', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '1', '0324', 'Y000 ', 'CP', .1, .2, 0, 0, .87, 0, TO_DATE('04/06/2010', 'mm/dd/yyyy'), TO_DATE('04/06/2010', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '1', '0170', 'X928 ', 'CP', 0, 0, 9.6, 0, 0, 159, TO_DATE('03/05/2010', 'mm/dd/yyyy'), TO_DATE('03/05/2010', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '1', '0130', 'H211 ', 'CP', .5, .1, 0, .08, .63, 0, TO_DATE('02/10/2010', 'mm/dd/yyyy'), TO_DATE('02/10/2010', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '2', '0120', 'H214 ', 'CP', .3, .05, 0, 0, .68, 0, TO_DATE('05/22/2009', 'mm/dd/yyyy'), TO_DATE('05/22/2009', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '2', '0122', 'T203 ', 'CP', 2.5, 1, 0, .67, .3, 0, TO_DATE('05/28/2009', 'mm/dd/yyyy'), TO_DATE('05/28/2009', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '2', '0130', 'H211 ', 'CL', .5, .1, 0, .67, .3, 0, TO_DATE('05/28/2009', 'mm/dd/yyyy'), TO_DATE('05/28/2009', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '2', '0170', 'X928 ', 'CP', 0, 0, 9.6, 0, 0, 153.12, TO_DATE('06/10/2009', 'mm/dd/yyyy'), TO_DATE('06/10/2009', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('1', '2', '0324', 'Y000 ', 'CP', .1, .2, 0, 0, .08, 0, TO_DATE('06/17/2009', 'mm/dd/yyyy'), TO_DATE('06/17/2009', 'mm/dd/yyyy'), 3, 3, 3, 0, 0);
INSERT INTO     op_detail
VALUES     ('2', '1', '0081', 'X516 ', 'CL', 0, 0, 0, 0, 0, 0, TO_DATE('07/20/2009', 'mm/dd/yyyy'), TO_DATE('07/20/2009', 'mm/dd/yyyy'), 4, 4, 4, 0, 0);
INSERT INTO     op_detail
VALUES     ('2', '1', '0324', 'Y000 ', 'CL', .1, .2, 0, 0, 3.03, 0, TO_DATE('09/11/2009', 'mm/dd/yyyy'), TO_DATE('09/11/2009', 'mm/dd/yyyy'), 4, 4, 4, 0, 0);
INSERT INTO     op_detail
VALUES     ('2', '1', '0170', 'X928 ', 'CP', 0, 0, 9.6, 0, 0, 204.16, TO_DATE('08/11/2009', 'mm/dd/yyyy'), TO_DATE('08/11/2009', 'mm/dd/yyyy'), 4, 4, 4, 0, 0);
INSERT INTO     op_detail
VALUES     ('2', '1', '0130', 'H211 ','CP', .5, .1, 0, 1.97, 2.67, 0, TO_DATE('07/28/2009', 'mm/dd/yyyy'), TO_DATE('07/29/2009', 'mm/dd/yyyy'), 4, 4, 4, 0, 0);
INSERT INTO     op_detail
VALUES     ('3', '1', '0170', 'X928 ', 'CP', 0, 0, 9.6, 0, 0, 255.2, TO_DATE('11/06/2009', 'mm/dd/yyyy'), TO_DATE('11/06/2009', 'mm/dd/yyyy'), 5, 5, 5, 0, 0);
INSERT INTO     op_detail
VALUES     ('3', '1', '0130', 'H212 ', 'CP', .5, .1, 0, .6, .03, 0, TO_DATE('10/21/2009', 'mm/dd/yyyy'), TO_DATE('10/21/2009', 'mm/dd/yyyy'), 5, 5, 5, 0, 0);
INSERT INTO     op_detail
VALUES     ('3', '1', '0550', 'R501 ', 'WK', 1, 16, 0, 2.2, 12.4, 0, TO_DATE('05/19/2010', 'mm/dd/yyyy'), TO_DATE('12/31/1900', 'mm/dd/yyyy'), 5, 5, 5, 0, 0);
INSERT INTO     op_detail
VALUES     ('3', '1', '0324', 'Y000 ', 'CL', .1, .2, 0, 0, .07, 0, TO_DATE('02/04/2010', 'mm/dd/yyyy'), TO_DATE('02/04/2010', 'mm/dd/yyyy'), 5, 5, 5, 0, 0);
INSERT INTO     op_detail
VALUES     ('4', '1', '0324', 'Y000 ', 'CP', .1, .2, 0, 0, .59, 0, TO_DATE('02/06/2004', 'mm/dd/yyyy'), TO_DATE('02/06/2004', 'mm/dd/yyyy'), 4, 4, 4, 0, 0);

This is the query, I'm working with right now:

SELECT     o.part_nbr               
,          s.major_seq_nbr          AS op_nbr
,          CASE          -- CASE statement to replace similar-to wctr_id's with a single new wctr_id, so we can treat them as the same
               WHEN     s.wctr_id     IN ('H211','H212')
               THEN     'Z211'
               ELSE     s.wctr_id
          END                         AS wctr
,          MIN(s.plan_su_rsrc)          AS min_plan_setup
,          AVG(s.plan_su_rsrc)          AS avg_plan_setup
,          MAX(s.plan_su_rsrc)          AS max_plan_setup
,          STDDEV(s.plan_su_rsrc)     AS sdev_plan_setup
,          MIN(s.plan_run_rsrc)     AS min_plan_run
,          AVG(s.plan_run_rsrc)     AS avg_plan_run
,          MAX(s.plan_run_rsrc)     AS max_plan_run
,          STDDEV(s.plan_run_rsrc)     AS sdev_plan_run
,          MIN(s.plan_subc_amt)     AS min_plan_subc
,          AVG(s.plan_subc_amt)     AS avg_plan_subc
,          MAX(s.plan_subc_amt)     AS max_plan_subc
,          STDDEV(s.plan_subc_amt)     AS sdev_plan_subc
,          MIN(s.act_su_rsrc)          AS min_act_setup
,          AVG(s.act_su_rsrc)          AS avg_act_setup
,          MAX(s.act_su_rsrc)          AS max_act_setup
,          STDDEV(s.act_su_rsrc)     AS sdev_act_setup
,          MIN(s.act_run_rsrc)          AS min_act_run
,          AVG(s.act_run_rsrc)          AS avg_act_run
,          MAX(s.act_run_rsrc)          AS max_act_run
,          STDDEV(s.act_run_rsrc)     AS sdev_act_run
,          MIN(s.act_subc_amt)          AS min_act_subc
,          AVG(s.act_subc_amt)          AS avg_act_subc
,          MAX(s.act_subc_amt)          AS max_act_subc
,          STDDEV(s.act_subc_amt)     AS sdev_act_subc     
,          MIN(s.act_start_dt)          AS min_start
,          MAX(s.act_start_dt)          AS max_start
,          MIN(s.dt_completed)          AS min_comp
,          MAX(s.dt_completed)          AS max_comp
,          MIN(s.qty_planned)          AS min_qty_plan
,          AVG(s.qty_planned)          AS avg_qty_plan
,          MAX(s.qty_planned)          AS max_qty_plan
,          STDDEV(s.qty_planned)     AS sdev_qty_plan
,          MIN(s.qty_recvd)          AS min_qty_recvd
,          AVG(s.qty_recvd)          AS avg_qty_recvd
,          MAX(s.qty_recvd)          AS max_qty_recvd
,          STDDEV(s.qty_recvd)          AS sdev_qty_recvd
,          MIN(s.qty_complete)          AS min_qty_comp
,          AVG(s.qty_complete)          AS avg_qty_comp
,          MAX(s.qty_complete)          AS max_qty_comp
,          STDDEV(s.qty_complete)     AS sdev_qty_comp
,          MIN(s.qty_scrap)          AS min_qty_scrap
,          AVG(s.qty_scrap)          AS avg_qty_scrap
,          MAX(s.qty_scrap)          AS max_qty_scrap
,          STDDEV(s.qty_scrap)          AS sdev_qty_scrap
,          MIN(s.qty_on_hold)          AS min_qty_hold
,          AVG(s.qty_on_hold)          AS avg_qty_hold
,          MAX(s.qty_on_hold)          AS max_qty_hold
,          STDDEV(s.qty_on_hold)     AS sdev_qty_hold
,          COUNT(*)                    AS rec_cnt
,          CASE
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
               THEN     '12 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
               THEN     '24 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
               THEN     '36 mos. back'
               ELSE '37 mos. back +'
          END                         AS time_period
FROM          ord_master o
,          op_detail     s
,          (     -- begin in-line view a, to get the min act_start_dt for each order
          SELECT     s1.ord_nbr
          ,          s1.sub_ord_nbr
          ,          MIN     (
                         CASE
                              WHEN     s1.act_start_dt     > TO_DATE('01/01/2000','mm/dd/yyyy')
                              THEN     s1.act_start_dt
                         END
                         )          AS ord_min_start
          FROM          op_detail s1
          GROUP BY     s1.ord_nbr
          ,          s1.sub_ord_nbr
          ) a     -- end in-line view a          
WHERE     o.ord_nbr          = s.ord_nbr
AND          o.sub_ord_nbr     = s.sub_ord_nbr
AND          o.ord_nbr          = a.ord_nbr
AND          o.sub_ord_nbr     = a.sub_ord_nbr
AND          o.ord_type     = 'AA'
AND          o.ord_stat     IN ('CL','OP')
AND          s.oper_stat     IN ('CL','CP')
GROUP BY     o.part_nbr
,          s.major_seq_nbr
,          CASE          -- CASE statement to replace similar-to wctr_id's with a single new wctr_id, so we can treat them as the same
               WHEN     s.wctr_id     IN ('H211','H212')
               THEN     'Z211'
               ELSE     s.wctr_id
          END
,          CASE
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
               THEN     '12 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
               THEN     '24 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
               THEN     '36 mos. back'
               ELSE '37 mos. back +'
          END
ORDER BY     o.part_nbr
,          CASE
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
               THEN     '12 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
               THEN     '24 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
               THEN     '36 mos. back'
               ELSE '37 mos. back +'
          END
,          s.major_seq_nbr

It gives me a lot of descriptive statistics on data stored in the database, divided into groups of the time period.

I have 7 sets of possible values for the wctr_id column, which are groups of similar/identical positions and should be treated as the same, assuming that the ord_nbr, sub_ord_nbr and major_seq_nbr are the same. In my case statement example above, every time I find 'H211' or 'H212', I'm replacing it with "Z211', which is my new unique identifier for all wctr in the Group ("H211', "H212"). I have 7 of these kinds of groups that should be replaced by a new unique identifier. Is my statement CASE (above) the best way to do it, or is there a better way? These groups of similar-wctr_id are not listed in a table anywhere.

Hello

As always, thanks for posting the CREATE TABLE and INSERT statements. It is very useful and leads to the more quickly, better solutions.
Another thing that is useful and promotes better solutions, faster, is to simplify your problem.
For example, you need to calculate a large number of aggregates, but looks like you already know how to do this. This issue only affects the CASE expressions, and how they interact with the GROUP BY clause. So just cut most of the aggregate functions.
Also, it seems that the finer points of view one online have nothing to do with your current problem. For purposes of recognition of this problem, pretend that one is a regular display, so it does not clutter the main request.

I think your problem might be reformulated as follows:
You already have a query like this:

CREATE OR REPLACE VIEW a
AS
          SELECT     s1.ord_nbr
          ,          s1.sub_ord_nbr
          ,          MIN     (
                         CASE
                              WHEN     s1.act_start_dt     > TO_DATE('01/01/2000','mm/dd/yyyy')
                              THEN     s1.act_start_dt
                         END
                         )          AS ord_min_start
          FROM          op_detail s1
          GROUP BY     s1.ord_nbr
          ,          s1.sub_ord_nbr
;

SELECT     o.part_nbr
,          s.major_seq_nbr          AS op_nbr
,          CASE          -- CASE statement to replace similar-to wctr_id's with a single new wctr_id, so we can treat them as the same
               WHEN     s.wctr_id     IN ('H211','H212')
               THEN     'Z211'
               ELSE     s.wctr_id
          END                         AS wctr
,          MIN(s.plan_su_rsrc)          AS min_plan_setup
          -- lots of other agtgregates go here in real query
,          CASE
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
               THEN     '12 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
               THEN     '24 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
               THEN     '36 mos. back'
               ELSE '37 mos. back +'
          END                         AS time_period
FROM          ord_master o
,          op_detail     s
,          a          -- in real query, a is an in-line view
WHERE     o.ord_nbr          = s.ord_nbr
AND          o.sub_ord_nbr     = s.sub_ord_nbr
AND          o.ord_nbr          = a.ord_nbr
AND          o.sub_ord_nbr     = a.sub_ord_nbr
AND          o.ord_type     = 'AA'
AND          o.ord_stat     IN ('CL','OP')
AND          s.oper_stat     IN ('CL','CP')
GROUP BY     o.part_nbr
,          s.major_seq_nbr
,          CASE          -- CASE statement to replace similar-to wctr_id's with a single new wctr_id, so we can treat them as the same
               WHEN     s.wctr_id     IN ('H211','H212')
               THEN     'Z211'
               ELSE     s.wctr_id
          END
,          CASE
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
               THEN     '12 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
               THEN     '24 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
               THEN     '36 mos. back'
               ELSE '37 mos. back +'
          END
ORDER BY     o.part_nbr
,          CASE
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
               THEN     '12 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
               THEN     '24 mos. back'
               WHEN a.ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
               THEN     '36 mos. back'
               ELSE '37 mos. back +'
          END
,          s.major_seq_nbr
;

which produces this output:

`                       MIN_
                       PLAN_
PART_NBR   OP_N WCTR   SETUP TIME_PERIOD
---------- ---- ----- ------ --------------
ABC-123    0081 X516      .0 12 mos. back
ABC-123    0130 Z211      .5 12 mos. back
ABC-123    0170 X928      .0 12 mos. back
ABC-123    0324 Y000      .1 12 mos. back
ABC-123    0120 H214      .3 24 mos. back
ABC-123    0122 T203     2.5 24 mos. back
ABC-123    0130 Z211      .5 24 mos. back
ABC-123    0170 X928      .0 24 mos. back
ABC-123    0324 Y000      .1 24 mos. back
ABC-123    0324 Y000      .1 37 mos. back +

The output is correct; the problem is, can we get the same results without 2 copies of the expression BOX wctr and 3 copies of the expression BOX time_period?
What is a good description of the problem?

To start, you can use aliases for columns in the ORDER BY clause. Unfortunately, it's the only place where you can use column aliases in the same query, where they are defined . You can calculate them in a query-sib and then use them in queries Super.
In other words, wouldn't be nice if we had a table just like op_detail, but with an extra column called wctr? Make a view: either a regular view (especially if wctr, calculated in the same way, to be used for several different queries) or view online, as shown below.
Wouldn't be great if there was a table that was like a, except that he had calculated alreay time_period? Make a view: either a regular view, or a view online, as shown below.

SELECT     o.part_nbr
,     s.major_seq_nbr          AS op_nbr
,     s.wctr
,     MIN(s.plan_su_rsrc)          AS min_plan_setup
     -- lots of other agtgregates go here in real query
,     a2.time_period
FROM     ord_master      o
,     (          -- Begin in-line view s, with data from op_detail
             SELECT  op_detail.*      -- or list all columns needed in main query
          ,     CASE          -- replace similar-to wctr_id's with a single new wctr_id, so we can treat them as the same
                   WHEN     wctr_id        IN ('H211','H212')
                   THEN     'Z211'
                   ELSE     wctr_id
               END                    AS wctr
          FROM     op_detail
     ) s          -- End in-line view s, with data from op_detail
,     (           -- Begin in-line view a2, to compute time_period
          SELECT  a.*
          ,     CASE
                   WHEN ord_min_start     >     ADD_MONTHS(SYSDATE,-12)
                       THEN     '12 mos. back'
                       WHEN ord_min_start     >     ADD_MONTHS(SYSDATE,-24)
                       THEN     '24 mos. back'
                       WHEN ord_min_start     >     ADD_MONTHS(SYSDATE,-36)
                       THEN     '36 mos. back'
                       ELSE '37 mos. back +'
               END                         AS time_period
          FROM     a          -- in real query, a is an in-line view
     ) a2          -- End in-line view a2, to compute time_period
WHERE     o.ord_nbr     = s.ord_nbr
AND     o.sub_ord_nbr     = s.sub_ord_nbr
AND     o.ord_nbr     = a2.ord_nbr
AND     o.sub_ord_nbr     = a2.sub_ord_nbr
AND     o.ord_type     = 'AA'
AND     o.ord_stat     IN ('CL','OP')
AND     s.oper_stat     IN ('CL','CP')
GROUP BY     o.part_nbr
,          s.major_seq_nbr
,          s.wctr
,          a2.time_period
ORDER BY     o.part_nbr
,          a2.time_period
,          s.major_seq_nbr
;

In your example, wctr is identical to wctr_id, except for two values. If it was more complicated (for example, if there is not only 2 values that must be mapped on 'Z211', but also 3 to did not amount to "Z987", and 1 which should be treated as "A012" and 5 who should appear as "A666" and...), then you pourriez encode this in an expression BOX humongeous (one nested expression BOX if it involves more than 128 branches) , but it actually belongs to a table, where you have the gross wctr_id (such as "H211") in a column and its equivalent correspondent (for example "Z211") in another. I know that you said that you cannot create new tables; I'm just pointing out that then you can tell people that won't let you create tables, it's a bad idea, likely to lead to errors and some time in the future.

V11, what is the best way to replace ImportSecurity.cmd
Hello

I've migrated my Server 9.3.1 essbase/planning to V11.1.1.2.

I've used ImportSecurity.cmd to load the security on the members of the outlines and forms of data in Planning. But now it seems that ImportSecurity.cmd is no longer available for V11 (or I have forgotten install / configure something?).

So, what is the best way to automatically load the security now in V11?

Thanks for your help

Concerning
Hello

You can use LCM (life cycle management now)
Take a look on:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_lifecycle_management_11111/launch.htm
Or have a read [here | http://john-goodwin.blogspot.com/2008/08/so-whats-this-life-cycle-management-all.html] for an overview.

See you soon

John
http://John-Goodwin.blogspot.com/

What is the best way to replace plan purchased from reseller with a similar plan purchased directly from Adobe?

We have a creative cloud for plan teams purchased from a reseller. It is about to expire, and we consider substituting a plan purchased directly from Adobe.
What will be the best way to do this?
Should we start with purchase of new Adobes site map, before the expiry of the existing plan and then invite existing users to the new plan?
Or is there a better way.
If we do it in the wrong way users could lose access to Applications, which will be a major problem.
Someone out there who have done this operation?

Hello

You will need to cancel the plan with the dealer first and then the Adobe purchase plan and assign licenses to users.

You will need to contact support by calling/chat for this request.

Contact the customer service

* Be sure to stay connected with your Adobe ID before accessing the link above *.

Kind regards

Sheena

What is the best way to make a second copy of a series of photos on a hard drive after that I imported and made changes?

What is the best way to replace the second copies of photos created during import with revised versions? Export, seems to be an option, but is there a method named? I use Lightroom CC/6

I don't think you understand the concept of Lightroom. The settings are stored in the catalog. They are not applied to the images. The catalog is the key. If the images in the main location are damaged or lost, then you can copy the backup images at that location and any adjustments that have been made will be implemented. The main thing you want to be sure to do is have a backup of your catalog, as well as a backup of your images. You can export copies of your images as JPEG, PSD or TIF images, and these copies will have all the adjustments included.

Best way to upload images files to a server

Hello developers!

I ve developed a picture of sotores wich App of the cam on the SD card. Now, I want to store that the images (jpeg files) on a server instead. Does anyone have suggestions on the best way to do it? Thak you for your advice!

Jose

Do HTTP POST request to the server and transfer your images via a HTTP POST request.

See the links below:

http://www.java2s.com/code/Java/J2ME/SampletodemonstrateHttpGETandPOSTfromMIDlet.htm

http://codetrips.blogspot.com/2007/04/HTTP-post-from-J2ME-MIDlet.html

I replace a website done previously before Page with a new site that I built in Dreamweaver, but wants to keep the URL address, what is the best way to achieve this?

I replace a site is at the top with a new website that I'm building in Dreamweaver, but want to keep the same URL which is the best way to go about this?

If you want to keep the same hosting provider, you have nothing to do. Just delete the old files of the site and download your new.

What is the best way to move the data from the app and Server data structures?
Hi guys,.

I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?

Thank you
Kim
There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

You can use method datapump oracle too.

If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)

Best way to move the file from one server to another VM

Hello
We will soon be moving on ESX3.5 45 virtual machines on the same network to ESX4.0 on another network. What is the best/best way to move these files? The original network, the files are stored locally on the server and run ESX3.5i. However, on the other network, data warehouses are on a San and the ESX hosts are in a cluster. Both networks are in the same physical location and can meet. I guess I can do it from the CLI of in ESX?
Thank you

If you have two hosts in vCenter Server, you can move the virtual machines without Storage vMotion (Powered-off VMs).

It is not necessary that both hosts have access to the San using cold migration.

Best way to present a query recordset to a remote server

Hello, everyone.
I was responsible for a project that will involve querying a table on a server, then send the data to a remote server that will take the data and insert it into another database (the two db cannot communicate directly with each other).
I've never had to do something like that before. What is the best way to get the desired results? Is it possible to "petition" (anywhere from 1 to 5 files at a time) to the remote server without incorporating WDDX?
CF9 environment, soon CF10.
V/r,
^_^

Hi, @BKBK,

Not allowed.

This is the kind of tedious, but I've worked so far is having CF1 select data from DB1, SerializeJSON data, cfhttp allows to VALIDATE data for CF2.

THEN, CF2 DeserializeJSON data in a query object and that insert into DB2.

Unless you think there is a better way to do it?

V/r,

^_^

Need advice on the best way to set up a 6 nic Server

I have a server with 6 cards. Looking for some suggestions on the best way of provision. We use the software iscsi client.
Here's what I think to do:
0/2 NIC (one onboard and a pci): VmNet
1/3 network interface cards (one on board and a pci): vmkernel: vmotion/service console
approx 4/5 (pci): vmkernel for software iscsi
Is there a better way to do it? It's just the way I'm used to doing. It would be nice to maximize the number of ports used for iSCSI.
Thank you!
-shane

Tough call...

If you lose the management network, HA will cause a failover.

If you lose the iSCSI, all virtual machines fail, but HA will not switch.

If you lose VM network, all communications from the virtual computer fail, but HA does not tip over.

If it was me, HA failover is a better option than full scall VM failure or net VM...

But now, you will get twelve opinions on which is better.

Dave Convery - VMware vExpert 2009

************************

Accomplish the impossible only means that the boss will add it to your regular tasks.

Doug Larson

Best way to replace a server VM?

Similar Questions

Maybe you are looking for