Best way to share the colors?

Similar Questions

• What would be the best way to change the color of a part of this picture? (image attached)

  I am on XP using PS CS4.

  Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros

  

  Thank you.

  I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

• What is the best way to change the color of the first word in a paragraph?

  I have a lot of paragraphs where I want that the first word to keep the same font, the size, the type - but I want to change just the color of the lettering.

  I suggest to do this:

  (1) change your BC 4567000000 to the following line:

  4,567,000,000 BC - name derived from Hades.

  (2) add the following line after the top of the page:

  . first-word {color: red ;}}

  Note the period in the above code.

  The top of line will now look like this:

  H1 {make-size: 200%; do-family: "Comic Sans MS"; color: #66FFFF; text-align: center ;}}

  H2 {make-size: 100%; do-family: "Comic Sans MS"; color: Red ;}}

  p {make-size: 100%; do-family: "Comic Sans MS"; color: #EEEEEE ;}}

  . First-word {color: red ;}}

  Alternatives are almost similar to this one but try this one and then come back and demand the implementation of alternatives.

• Best way to keep the color to be an indicator of update string

  I wanted to add a feature to my swiss knife armay RS232 application.

  With the help of a string indicator and indicate the read and write strings in different colors.

  

  The program enclosed works, however since each update of the results of the chain in one color of the solution need a rewrite of all colors after each update which translates the flicker

  and if you connect to data more in the indicator it is a bad solution.

  An improvement would be to store only the blocks of the same color...

  Someone who has a better idea or solution?

  Use them to write strings in an image control.

• Best way to share the Premiere Pro project between computers

  I have Premiere Pro on a Mac.

  We use Media Manager to share projects in Final Cut Pro, and it works very very well. Is there an equivalent of first?

  I have media from filming which is duplicated on two computers. Each computer has a different project and edit partner as meda. I want to put the two bills on a single machine.

  I copied the project from computer A to computer B and re-related to the media, but the change is over. Y at - there a trick to this? I also do some kind of stunt?

  If you have both the same elements exact the edict should open normal upward. Where I work we constantly are simply the prproj file because we all have exactly the same elements of edition, such as the lower third, bumps, voice-over, music, promotions, entertainment. So basically, it is quite simply because we have a folder structure for each program that we publish and that makes things extremely simple. At most, therefore, recreate a link to 4-5 folders because once add you a link to something a category/folder, everything is auto-pilot. Because the first then searches the rest of the stuff in this particular category within the folder. So re-binder is pretty easy, as long as everybody keeps their correct records.

  However, as Steven mentioned correctly, you can go to project > project mananger and you copy all your clips into a new folder. You can create a cut version of the project or a full version of the project. But if you and your interlocutor, that both have the exact same thing, so you should not need similarly to use project mananger, if add you a link to all the media correctly there shouldn't have been any question, I did this literally 1000 times and never had a problem unless I accidentally hurt linked something.

• The best way to change the red color to white?

  Can someone tell me the best way to change the red part of the label in this image for white? I'm having a hard time understand this point and I know there must be a solution simple or semi-facile. I have about 10 of these I need to change. Thanks for the help!

  

  Hi Sheera730,

  Please take a look at the following article, it should be useful: https://blog.udemy.com/photoshop-replace-color/

  Kind regards

  Tanuj

• Need help: best way to exchange the Ipads?

  Dear all,

  Need help a genre:

  I use Ipad Air2 and my father is using retina Ipad Mini... I gifted him before 2 years...!

  We thought to share the Ipads because he loved the biggest... Can someone guide what is the best way to swap the parameters of the iPad?

  It is by taking backup and restore from Icloud? There will be data loss? or anything else that needs attention (something that he needed to be reconfigured)?

  Any help is very appreciated!

  Make a backup of each individual iPad. Use your own accounts: How to back up your device using iCloud or iTunes - Apple Support

  Import your photos from each iPad: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

  Then do it on every iPad: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then restore the backup in your 'new' ipads: restore your device from an iCloud or iTunes backup - Apple Support

  If the ipads have the same size of storage with the same iOS version, it should work fine. -AJ

• Best way to share your photos - PSE 14?

  What is the best way to share your photos?

  When I consult with PSE 14 mode full screen, I see the full picture with captions.

  However:

  • Legends are not available in mode see the hand PDF Slide.
  • Create PDF Slide show mode, subtitles are available.
    • Howevever the full picture is not available. Most of the "themes" seem to cut the top and the bottom of certain images
    • And the themes seem to hijack images, rather than simply presenting the photos.

  Would like to be able to capture and send the view from the mode full-screen as a PDF or something.

  Still, what is the best way to share photos by e-mail?

  Thank you... Ron

  We have all different ideas on sharing via "email address" and often features elements are not satisfactory for our purpose. You have perfectly described two features of pdf, share via the output to a pdf slide show (or video) or pdf.

  Both are quick and easy, but there is no direct way to display captions with images full resolution and without transition effects.

  You can use the function 'Print' with 'other options' Organizer configured to display captions, date... and specify one of many virtual printer drivers send the result to PDF instead of printing (standard in Windows 10). A quick and automated to produce a PDF without transitions and captions.

  Or you can use a free, good software like Faststone resizer to prepare your output with more control over the size and position of the legend.

  I have another problem: my use of the legends is such that I'm not all the legends that are shown, and I don't want each picture to have a caption (or title or date...) In fact, the text I want to appear on the pdf presentation would be specific to each image, with a different position depending on the image. It can be done with some work, and the result is much better.

  When I want to share (I like Dropbox, but other storage cloud solutions are good), I choose my output size: (rare), HD TV screen full resolution or smaller. The Organizer, I do a resize a selection based on the height in pixels, then another resize a canvas based on the width, in pixels, with a black background. Can I edit the files individually to add text (not necessarily the legends) where I want to. It's the only job that requires little time, but the result is much better than including legends, both for the appearance of the text and the coherence of the story.

• Best way to combine the 8-bit and 16-bit image files?

  I produce large photographic reproductions combining my own photo images modified RAW 16-bit with 8-bit stock photos and 8-bit of photoshop work. I used just reduce my photos from 16-bit to 8-bit and then change my image composite 8-bit, but I stumbled on the banding and other problems in the color gradients, I created later in my composite image.

  I want my composite image at 16 bits to get more specific and better degraded colors. What is the best way to bring the image to 8-bit files in my composition and maintain the best quality? Is it good to convert images to 8-bit to 16-bit in PS, before you import it? I've also heard bringing 8-bit images as smart objects? Thanks for any help on this.

  Even when there is no need to convert the document to the item in 16-bit mode is not.  If you need all the layers to adjust the image of the element to be light or mix better, it's better you have two choices. Do not open the file of the item in Place as a smart object layer and then open the embedded object and change the copy of your document.  Or open the target document element all the layers and then drag the document you are working on.

  The second way would produce a larger file of the document then the smart object layer way. For all layers will be 16-bit color. When the layer of integrated dynamic object is a copy of an 8-bit image file only the composite made of pixels of the object is to convert 16-bit mode.  A smart object layers pixel is like a whose pixel raster layer cannot be changed only acted on.  To change the pixels, you need to open the embedded object and modify the object.

  If you do not need the layer, you can simply drag into those that you need.  Yet once, there is no need to convert the document to the 16-bit mode, Photoshop element that will be in any copy of drag layers.

  When you use Photoshop how to think or what Photoshop just make how he could do. Shortly after, you will have a better understanding of what is happening.

• What is the best way to make the uniform skin (not necessarily blur it!)

  Hello

  I have some photos where the skin of the leg of the model is not uniform brighteness. Without this vagueness, I tried the clone stamp, but it is very difficult not to introduce new variations of brightness.

  What is the best way to make the uniform skin of brightness (in fact, the same color!)?

  Thank you

  Juan dent

  I know EXACTLY what you mean.  I was doing something exactly on these lines just yesterday.

  It is not trivial, but it is doable.

  For 'hard points', you can try the Spot Healing Brush first.

  But here is a tip that I use sometimes which may well increase overall finesse:

  1. select just the surface of the skin.

  2. selection a little market and soften the edge, just to make sure that you don't mess the edges.

  3. median filter - noise - and set the RADIUS to be big enough.  Look at the image to see the level of smoothing.

  4. change - bland and knock back effect, while it is not perfect, but makes a subtle improvement.

  

  

  

  Then, for clearing-up soft darkening, try the burn and Dodge tools, at a low level of exposure (and possibly with Airbrush Mode).  Work slow.

  Cloning with low opacity can sometimes help as well.

  -Christmas

• Best way to adjust the lighting in the video clips

  Is there a 'best' way to adjust the lighting conditions in a video clip?  I have a clip with terrible lighting conditions and can not remove the scenario.

  While I don't expect a perfect solution, I hope that there are approaches better than those I serve.  If the recommendations include third-party plugins, I would appreciate hearing about them, as well.

  I have been using the corrector, gamma and luminance correction filters.  Adjustments of corrector gamma in higher values, but seems to only work by discrete steps.  So, if the gamma should be entered upwards or downwards in a clip, there is a very visible and sometimes jarring visual effect.  The luma corrector seems to only be able to increase the brightness level (thanks to a combination of all the variables of 5 or 6, including brightness, gain, gamma, etc.) before the clip appears washed out.

  Thank you

  Steve

  All the CC and grading should begin with 'levels '.

  You could then enter the 3 - Way Color Correction.

  You can also watch a more powerful CC such as 2 Colorista

• Is there a way to change the color of a 5 c?

  Is there a way to change the color of a 5 c?

  N °

• best way to clear the cache on an iMac 2011 - el capitan

  best way to clear the cache on an iMac 2011 - el capitan

  The best way is not for everyone. Clear the caches unnecessarily makes your computer run more slowly while they are rebuilt. Did you have a specific problem that you thought that clearing cache can solve? If so, post on the real problem.

• What is the best way to use the Y50-70 battery please?

  I bought the laptop y50-70

  but I want to know what is the best method to use the battery.

  and the best way to recharge.

  NOTE *.

  IAM always use the cable and I gave the battery except a few times.

  Thank you very much..

  Best way to use the battery, if your laptop should ALWAYS be connected in-

  Go to eat energy Lenovo - should be a RED icon in the system tray - and choose the mode for a better health of the battery (or battery Protection or health of battery optimized mode).

  I don't know what the energy Manager version you have, but the option must seem similar. What it does is, it will keep your battery charged ONLY up to 60 percent and will increase its service life.

• Photon: Best way to snap the back cover in place?

  What is the best way to put the cover back on? What sequence I use, it seems that one of the plastic snaps is not committed.

  There are instructions inside the battery cover. You start at the bottom and work your way up to the left and the right. That being said, check the clips on your lid and make sure that one of them is not folded. This happened to me the first day I bought the phone. I had to get a new one from the Sprint Store. Do not force the clip if it is wrong. I think that's how mine has folded.