The best way to change the red color to white?

Similar Questions

• Color problems: the red color has disappeared from my computer

  Original title: color problems

  The red color has disappeared from my computer. The moniter is ok.

  Hello
   
  You did it changes on your machine before the problem?
   
  It could be a hardware failure.
   
  Things that can be loaded are listed below:
  
  broken monitor cable has...
  b. defective monitor.
  c. faulty graphics card.
   
  You can consider measurements:
   
  Step 1:
   
  Double check that monitor cable is firmly attached. Try the Wiggles, see if the color returns.
  Step 2:
  
  Test another monitor on the PC (Personal Computer), and/or the monitor on another PC.
  Step 3:
  
  You may have a bad cable, or the monitor may be defective.
   
  Step 4:
   
  Right-click on the desktop and select Properties. Go to the tab settings, and report on what choice was filed under 'Color quality' and what is the other choice in the drop-down list?
   
  If there is no choice of color quality better than what you have, you may not use the correct driver for your video card or monitor.
   
  Uninstall and reinstall the drivers for video card and see if the red color appears.
   
  Follow the steps in the link to uninstall and reinstall the video card drivers.
  http://www.Microsoft.com/windowsxp/using/Setup/support/driver.mspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

  HP Color LaserJet 2600n, Windows 7 64 bit

  The red color does not print correctly, it of a weak orange and turn yellow on the edges.

  The problem is, even if we just replaced the cartridge.

  The other colors are fine.

  I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

• Is there a quick way to change a specific color in an image without masking or select an object?

  Is there a quick way to change a specific color in an image?  I mean, for example, slecting an object in the image and change the color of the object which may involve masking, etc..  What I want is a quick way to change the bokeh or part of the bokeh from an image to a nicer color.  Maybe something like help of the color picker to choose a specific color in the image and to be able to change all the colors with this exact value (hexadecimal number)?  Not sure if I explained it very well.  But I'm looking for something more specific while playing with the color sliders - I want to be able to choose the exact color for areas of interest of my image.

  The description you give is something that Photoshop does, but Lightroom does not.

  You can use Lightroom to brush an area to have some white balance, but this seems different from what you are trying to do (and it is not "fast" anyway)

• change my text color to white

  I have change my my color of white text and black background

  and now my text not displayed all the other colours seem to be working please help

  I was afraid that you would have done it.

  Please change back to white.

  If you want a black background, just draw a big rectangle and fill it with black.

• What would be the best way to change the color of a part of this picture? (image attached)

  I am on XP using PS CS4.

  Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros

  

  Thank you.

  I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

• What is the best way to change a column type in the materialized view?

  Hello my dear friends,.

  I want to change a column type in a materialized view. VARCHAR2 NUMBER, so what do you recommend? What is the best way to do it?

  Thank you

  You can not change the data type of the column while there are data in the MV, so you might as well give up and recreate the MV with a TO_CHAR() around the column in question in the application of MV to get the data exactly as you want (be sure to include an appropriate format mask). That said, I'm fighting to think reasonable grounds to make such a change.

• What is the best way to change the size of a design?

  I have an announcement in A4 format and need to change it to a bunch of different sizes, what is the best way to do it? Just making it smaller does not work because the text that it becomes small to read.

  Erica Gamet gave a great presentation on this topic (which creates several sizes of an ad in InDesign) to my user group earlier this year. There are two messages for Erica who explains how to put in place:

  http://creativepro.com/understanding-liquid-layouts-part-one/

  http://creativepro.com/understanding-liquid-layouts-part-two/

• What is the best way to change hosted on Bluehost site BC. but keep existing accts e-mail on BlueHost?

  My client currently has their old site and multiple e-mail accounts hosted by BlueHost. We are past to welcome his new Web site (created by Muse) on Business Catalyst, but they want to keep their existing e-mail accounts on BlueHost account. At first, I changed the names of servers on Bluehost so the site will host in British Colombia, but then noticed that their emails.

  I found some conflicting info but trying to research the best way to do it: they say that, so that email is not affected and continue to exist with BlueHost, I need to create a record on Bluehost with server names BC while the new site is in British Colombia. Another forum I found said I should change the name servers, and then add an MX record in Business Catalyst (but wouldn't that affect their current emails?). Thanks for all the tips on how to do it. I'm quite new in British Colombia.

  You just need to edit the record

  https://my.BlueHost.com/cgi/help/a_record

  Point web traffic in British Colombia only.

• HP OFFICEJET PRO 6230: Best way to change the settings WIFI on HP OFFICEJET PRO 6230

  Hi all

  Just after some advice about this printer. It's the printer be mobile , so it can be taken with the Member of staff, connected to wifi where they are and then the group they present to can do impressions of him through their ipads (via AirPrint).

  This all works well 'in House' connected to our wireless network. Have set up the printer wireless via the software installed on their laptop computer (with a USB cable to transfer the settings of the printer), but y at - it an EASY way to change the SSID and password wifi when they are there in the area? I know you can hold down the button "wifi" on the printer for three seconds (until the wireless flashes) then hold down the button "WPS" about to access/reuter and they have a link but it's only if WPS is available and that the staff member can access the reuter/access point.

  They will have their laptops with them and USB cable in order to re - set the SSID and password, but seems a bit lengthy to go by "connect a new printer" for each site they visit. Is the right way to do it or there at - it another way 'over easy' I forgot. I guess also here the printer remembers SSID/passwords so that there be set up a time for a given location and then will be "auto-connect" if they come back? Is this correct?

  Any help on this is much appreciated.

  See you soon,.

  Andy

  Not the printer that you want to do.  Here is the Guide of the user for you to read on your wireless options.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6230-ePrinter-series/5390318/model/5390319/manuals/

  You will need to run the configuration each time to connect software.  You could try Direct another wireless to connect to the printer.  You need a printer with a Panel for configuration complete front so you can easily change the SSID.

  Whatever it is, everyone will have to load the software in order to use the printer.  It can automatically connect, but do not count on it.

• 27gig upside down footage, the best way to change? Flip export then re edit or what?

  Hi guys, I went on a ski hol recently and have 27gig down on a helmet camera footage, I'm really stuck on how best to modify, it is filmed at 60 frames per second at 720. Not sure if reverse all export and import the correct path upward and start editing from the source and, if that would be the best way of setting export to keep the out put to the same settings. Thanks in advance

  To .avi I would try uncompressed (none), UT or Lagarith.
  All them is likely larger than your original files,
  but that's the price to pay for shooting backwards.
  I favor uncompressed (none)... the files are a little smaller.

  For Quicktimes, component or uncompressed without loss.
  The Avid DNxHD codec becomes good review of quality depending on the size,
  but I don't have any direct experience using it.

  You could experiment with high speed I-frame only MPEG files.
  and modify your own encoding settings to get what you want.

  First, I'll start with a short clip and experiment with your results.
  Some formats can read for you more easily than others,
  and you don't want to encode alone to find reading
  is not what you expected.

  Good luck and happy flipping file.

• Publisher 2007 when I save as PDF, the red color becomes grayscale.

  I created a document in Publisher 2007.  I used the font color to red and saved.  When I then its ved to PDF or XPS, red font converted to grayscale in PDF and XPS.  No idea how to solve this problem?

  Hello Rburla,

  Welcome to the Microsoft Answers Forum!

  I suggest to change the color of the text in the Pdf file by accessing the properties bar by pressing Ctrl + E and change the color of the text that is selected according to the needs and save the file and check if it helps.

  For more information about how to convert publisher to pdf files or xls files, please see the links below.

  Save a publication as a PDF or XPS file

  http://Office.Microsoft.com/en-us/Publisher/HA100649921033.aspx

  http://Office.Microsoft.com/en-us/Publisher/HA100643861033.aspx

  How to create a PDF file in Publisher

  http://support.Microsoft.com/default.aspx/KB/302835

  If the problem persists, you can post your question in the Microsoft Office community for best results. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Please get back to us if you have any other questions.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• I don't see the red color on the computer screen.

  Red color went from my screen and seems to be replaced by black. GPU is a GeForce 7050/nForce 610dans. Could there be a compatibility problem with a recent automatic update?

  Change of monitor-problem still exists.

  Check the cable problem still exists.

  Had the same problem 5/6 weeks ago. Seemed to correct itself but problem home yesterday and will not go away.

  Original title: red color went from my screen

  Thank you. I tried a different monitor on the same cable and had the same problem. I tried another computer with the same cable and had no problems. Now, I installed a replacement graphics card and the problem is solved. Response - graphics card has failed. New card replacement/installation.

  Kind regards

  Bob.

• I am currently studying and modules are in PDF format. I desperately need to change the background color, as white background cause my eyes to water after a few minutes. I was able to change the background color of a light blue before the l

  Can someone help me please?

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  Hi arthurd55302175,

  You can try to change the background color of the document by using the Document color replace.

  Open the required PDF, go to edit menu > accessibility > replace color Documents.

  You can use contrasting colors option to select the required combination of colors provided in the list or you can use "custom color option and select the color needed for the page background and document text."

  Then click OK to save the settings.

  Kind regards

  Meenakshi

• 5 Lightroom do not make the red color correctly

  Out of the blue, LR5 decided to make red like a dark orange - similar to the orange colors of the SF Giants team.  But the red in glimpses of import LR5 is correct.  It is also true in another editor, Faststone Image Viewer and Irfan View.

  It is orange when open in Camera RAW 8.1 PS Elements 10.  If the culprit seems to be Camera Raw 8.1.

  A picture is worth a thousand words:

  

  DdeGannes wrote:

  Then I rest my case you have a problem with the monitor profile.

  You will have to reopen the case.  After a few detective online, I swapped the (no pins missing or twisted) VGA cable to a DVI cable.  Problem solved.