Best way to troubleshoot slow VI.

Similar Questions

• What is the best way to copy the 700 lots of e-mail files to a new computer?

  I'm moving my wife and an old (Thunderbird, Win XP) computer to a new computer (Thunderbird Win 7). It has about 700 local folders with thousands of emails in them. What is the best way to copy to the new computer?

  The easiest is just to copy the whole profile.

  Menu help > troubleshooting information

  Close Thunderbird

  In windows Explorer, select all and copy.
  just stick on a thumb or other portable media to read/write (not the CD or the DVD)

  on the new Machine to repeat the troubleshooting and close the steps to get the current profile folder

  This time all the portable media stick in the profile to replace what is there

  Open Thunderbird, your additions of e-mail contacts does it all

• What is the best way to ensure that there is no virus

  Hi guys,.

  Thanks for your reply,
  I believe that my laptop has a virus or spyware. It is slow and take ages to get up. Also during the use of internet Explorer is very slow in browsing the internet.

  During the use of msn chat voice sometimes it freezes.

  What is the best way to be sure that there are no viruses.
  I already have Norton 2007 with the last update.

  Thank you

  Hello

  > What is the best way to ensure that there are no viruses?

  The best way is to use an Antivirus application and some Anti-malware and Trojan applications.
  You already use the Norton Antivirus program. It is very good. Remember that this application is always up-to-date.
  Additionally, you could install Adaware. It is freeware tool and it scans your operating system for malware.

  But the virus or malware is not always a reason for a BONE of freezing.
  Please check your processes that are run in the context of the BONE. You can also use the application called CNettoyez.
  It scans you BONES of this situation and repair the registry.

  Maybe it helps

• Satellite A200 - 1 M 5: what is the best way to extend our battery

  Hi there everyone,

  I hope you are all good, I kindly need to know what is the best way by which we can extend the battery from our PC, I had a friend who apparently frustrated because his laptop battery is almost dead then that PC disconnected electricity; It gives him only five minutes and the beep starts.

  I think she always used his laptop plugged into the electricity, not frequent unloading / loading the battery and yet, I really appreciate it if you guys out there (blessed) could help me maintain my and his of (she bought a new battery lol) batteries.

  Note: My Satellite A200 - 1 M 5 gives me 2.45 minutes after 4 months and I'm happy with that, I turn on my laptop disconnected to power (releases) often, but I feel that I can't explain or help others to look after your laptop battery.
  Thanks a million in advance

  Why we can not find the information seen on the Toshiba site maintenance?
  Maybe we didn't get!

  Hello

  I think you're right research you didn t on the Toshiba page quite long ;)

  I have consulted the European Toshiba support page and selected in the troubleshooting category option-> Solutions to common problems.

  There I found the battery category, and then I found this article:

  * + How to configure my computer for optimal use of battery? + *
  http://www.toshiba-tro.de/KB0/HTD5400Z60005R01.htm

  It looks like an old FAQ document in any case the fact is that all batteries lose own performance after several times several years ago, it is advisable to remove the battery from the laptop to extend the battery life. This is not necessary with the new battery and generation of laptops.

  However, many people remove the battery if the laptop works on sector (power adapter connected) This prevents the battery of standing of the charge and discharge.

• What is the best way to correct the registry errors without the use of a registry cleaner in XP?

  I am sorry to raise this issue that so many people who have asked me.  I read pages and pages of discussions on the MS forum on this subject, and without exception, all the experts said Microsoft registry cleaners are completely unnecessary and that junk in the registers has no performance impact at all.  Instead, they say, to do x, y and z.  I am running Windows XP on my desk for five years, and gradually, he got so slow it's almost unbearable.  It takes 10-15 minutes just to start, and sometimes it takes 2 minutes or more just to open a window of browser (IE8) or go to the previous page by using the arrow to the left.  Before you tell me all the things it could be, please let me say that:

  1. my PC has not always been this slow!  It is getting worse.

  2. all my Windows software is up to date.  I have automatic updates on.

  3. I have a lot of disk space, almost 75% of free space on a hard drive of 80 GB.

  4. my PC is free of viruses, spyware and Trojans.  I have McAfee antivirus running and I also sometimes run Malwarebytes and Trojan Killer, because they always find things that don't have McAfee.

  5. I defragment my hard drive on a regular basis.

  6. I regularly delete all my temporary files by using the Windows Disk Cleanup utility.

  7. I have very little, if any "Add-ons".  No toolbar Yahoo or Google (or Bing!).

  8. I removed nearly every program that I start, so that they are not running in the background.

  9. I uninstalled all the programs that I don't use.

  However, I still have a slow ever-more computer.  Sometimes, when I see ads on TV to increase the speed of my PC, I download the 'free' software, and they claim to find hundreds or thousands of "registry errors.  When I look at the newspapers, I see many entries in registry for 'Netscape' and 'Google Earth', which I uninstalled years ago, as well as entries for the videos that I downloaded, seen once, and deleted a long time ago.

  So, what's the problem?  If it's not related to my registry (which Trojan Killer says has more 6 000 entries!), what else could be?  I would appreciate greatly any advice you can give, because there are dozens of companies on their touting their registry cleaners and the uninstall (for a price) programs, and after reading reviews of the MS MVPs, I'm skeptical of their claims.  Thank you.  :)

  I can't disagree with a lot of things have already been said.

  I'm willing to accept that your machine does actually takes 10 to 15 minutes on the clock. It's completely absurd.

  Some people call your "Windows Rot" problem. Becomes just the slower windows over time. It is a collection of things that are happening in the background. Yes I believe that the register contributes. Using a registry cleaner is not a "magic" solution But it can help a little.

  The PC care program/process you described is above average.  I suggest you add CCleaner. Disk Cleanup is not bad, CCleaner is better, cleaning of other stuff which does not resemble the DC. It won't be a significant difference because disk space is not your problem, but it will help a little.

  'Play' with the registry is VERY risky. If you decide to go ahead, I would say that first make you a copy of the full image backup using a utility that can be started and run from a CD/DVD. Just in case the registry cleaner breaks of your machine.

  Registry cleaners is that they take a "best estimate" to what is no longer necessary. Sometimes they think wrong. And each vacuum cleaner will clean slightly different sets of places.  If the tool does not provide a way to back up the registry before you start cleaning, do not use it. He is not careful enough.

  If vacuuming offer 'levels' of cleaning, enjoy. Open for more aggressive cleaning, with resetting and long series of normal use between cleanings.

  You are looking for a tool which also makes registry "defragmentation". The registry is a database that get disorganized by additions and deletions. Defragmentation will be re - organize and get rid of a 'lost' space, making it the smallest file, afterwards faster to read.  It is not something you need to do frequently, but since you've never done it in 5 years, it would help, after cleaning registry.

  Another place to find CPU and RAM wasted resources is Windows Services. These are small programs that start at boot time. They run in the background and provide support services to all applications or specific applications.  Many applications services are running even though you don't really need them. You can find information on which you can set by Googling for 'Windows XP hardening'. There are a lot of sites with good information. They call it hardening because by disabling unnecessary stuff, you leave less possible openings for the "bad guys" to the attack.

  Ultimately, I think your best bet will simply bite the bullet and re - install windows and all your applications. It's the best way to restore your computer to almost any performance fees factory. (It is not exactly factory fresh because you need to add a ton of Windows updates).

  Before you re-install, do copy image 1 or more full backups. At least one must be done using a tool that will easily allow you to extract the files. You data backup files separately to make it easier to restore the reinstallation. IE, copy it to a USB key.

  Many "experts" actually expect to, and do, re - install windows every 6-12 months!  I think it's a bit exaggerated, but they swear by it.

  Once you do your re - install, create a copy of the magnified image
  Install a firewall application (before the windows updates)
  Once you do all updates of windows, create a copy of the magnified image
  After that you re-install all your apps, create another copy of the complete picture.

  In this way, in the future, you have more current points to restore your computer to. It will reduce the time you spend to get back to the current configuration.

  On a 5 year old XP machine, you have probably 512 MB - 1 GB of RAM. You might also consider taking in the shop (or DIY) and bump the RAM up to at least 2 GB or better still max out.  The current versions of the applications use much more memory than they did 5 years ago. Even XP will be since he has been seriously corrected since then.

• What is the best way to get several updates fail to install

  I have 32 updates that have failed to install.  How is the best way to go back and get to install them?

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Windows update General troubleshooting

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Or try to install the updates in a clean boot state, and run Windows Update: http://support.microsoft.com/kb/929135

• best way to transfer of Z1 to Z5?

  When I moved from x 10 S, then S for Z1 I went the slow lane of loging into the new phone using my old details of gmail and install virtually all applications and fees to music (and with 10 GB of music, he reselection of the pc on mediago library and transfer to sd card takes hours!)

  This time I'm hoping to use either "nfc" or "pc companion" to do as much as possible this time...

  What is the best way?

  I have a U1 C10 64 gb sd speed in my Z1 and I have a new U3 C10 64 gb sd ready to put in the Z5

  What transfers?   e-mail gmail settings?   assigned notification sounds?  all of my music in the SD card to new SD card phones?

  My all the apps take themselves or do I go in reselct and google them from the tab set 'all '.

  can I when the "new sim card" is not yet activated and the old phones sim is still active or when the Z1 sim is dead and the Z5 SIM is active (as EE always deliver new sims, even when the shape is the same, which is not this time is it?)

  and can I connect on the new phone with my gmail account used on the Z1 before you begin, then?

  Just use transfer Xperia or Pc companion http://www.sonymobile.com/global-en/apps-services/xperia-transfer/transfer-from-android-smartphone-o...

• Is to do a reset of the best way to clean my hard drive on my desktop windows 7

  I have a HP Windows 7 PC desk top and the hard drive is almost full with only 50 concerts remaining out of 584 concerts.  Everything is slow. I have a 1.5 T external HD that contains copies of all the files that are located on the C drive.

  (1) do a reset clean all files and software that I added?

  (2) I can then just transfer a few files that I need on a regular basis of the hd on the PC cleaned hd post?

  (3) is the best way to release my PC hd?

  (4) should I use recovery on the D drive, or should I use the disks I made when the computer is new?

  (5) it will be easy to upgrade to Windows 10 when it is available, or should I wait.

  (6) it is the fastest way to free my hd PC.

  Thanks for your help!

  Hello

  1 Yes; but a bit excessive as everything is erased including data; Back to the State nine and all updates must be resettled, as well as the 3rd party programs reinstalled, etc...

  2. Yes.

  3. There are other options; Read further down.

  4. the recovery discs are made from the recovery partition. but the recovery partition by pressing F11 repeatedly, is easier IMO.

  5. you have 12 months to upgrade free of charge once Windows 10 is out

  6. it is an option

  This is the procedure normally, we recommend you to free up space on your hard disk:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

  ____________________________________

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Not sure about the best way to structure my app.

  Hello

  I'm not sure of the best way to structure my app.

  I have a main menu that links to 3 submenus, each a link to a number of pages. Initially when I clicked on a menu button, that he would open a submenu instantly and then clicking a button, the page open instantly. And return to the previous menus was also very fast.

  But at some point that he started getting really slow. I click on a button in the main menu and he thinks for a while before moving on to the pick-me-up submenu is too slow. I'm not sure why and I lose a lot of time trying different ways to do it.

  So what I want to know, as far as efficiency goes, should I create the main menu and submenus 3 at the start of my application, keep these same objects active and just pass pointers to them around like settings and pop on and off the screen of the battery when required, or should I just create them as new items whenever they are needed?

  Any advice on this would be greatly appreciated.

  If each submenu returns to the main menu, just use the screen for the navigation stack. Don't forward mainMenu for the submenus; to return, just pop the submenu and the main menu will be back at the top. At the time of mainMenu wants to open a submenu, just push without fun first.

  Have you thought to check for memory leaks? There is a discussion of 3 parts of this by Kamen:

  How to find that leak memory (part i)

  How to find this memory leak (Part Two)

  How to find this part of memory ((troisieme leak)

• Best way to sort, organize and delete the RAW files?

  Hello world

  I am looking for a way to simply sort through a series of close to 600 raw on a Mac files.  I'm very new to this, so bare with me :)

  At first, I downloaded the raw files from my SD card in my iPhoto which led to all the files in JPEG format.  So I decided that it was no good, so I tried to put the CR2 files in an organized folder and dragging the file in the preview.  I find that the preview is verrrry slow.  I'm looking for the best way to sift through

  These files and choose the best/remove the worst.  What do you recommend? I plan on changing the files in Photoshop and Lightroom.

  Is there a place in Lightroom where I can get this sort of process I speak of? Or do I have to download another type of organization program offline?

  Thank you

  If you mean the word "out" the process of getting rid of the 'bad' images, and Yes keeping 'good' images, Lightroom can do this as many other programs.

  In Lightroom, you would import the 600 images together, and when the import process is completed (this may take a few minutes or more depending on your computer), then you can scroll through each image and if you decide that it is a 'bad' image that you don't want to keep, press X, then go to the next image. Once this is done, you can delete all the photos that you have assigned X in a single action.

  Other programs will probably allow you to do this "spell" faster, but I can't talk about them.

• Best way to run a script from a script

  Hello world

  I'm looking for running a script from an After Effects script, so far, there is aftereffects.executeScript (scriptContent) who use eval to run the script. The problem is that it uses eval so it is not really sure and he is slower. So I would like to know what is actually used when we file-> Script-> Run script file.

  As seen in the Javascript tool Guide CC page 168 in the section QAnywhere Corss-DOM.

  aftereffects.executeScript(theScriptContent); // Doesn't work with a script which as comments AND the script has access to my scope
  

  In addition, if there are comments like / * * / or / * / in the script I want to run, it no longer works.

  So, what is the best way to run a script from a script?

  If you want to evaluate a whole script file, you can use $.evalFile (file, timeout) - see description in ESTK object model viewer

  To evaluate a bit of code, you can use eval, that's for sure.

  Xavier

• Best way to move a virtual machine to new hardware

  I have a SBS 2011 VMS under ESXi 5.  The material is not enough and performance are slowed down.  I want to spend the SBS 2011 VMS to new hardware.  After install ESXi on the new hardware, which is the best way to move the virtual machine.  It's big enough, and it is a production server - I'm looking for fast and efficient.  What are the most common problems when moving from a virtual computer to new hardware?  Thank you!

  A virtual machine is encapsulated in a set of files, making it easy to carry; You can copy the files from the virtual machine using WinSCP or any other program to the destination host. Register the vmx on the new host and turn on the virtual machine. You may also look @ of Veeam FastSCP for this purpose. I have not had the chance to use it yet, but it's free and seems very popular with the community:

  http://www.Veeam.com/VMware-ESXi-FastSCP.html

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• What is the best way to make the uniform skin (not necessarily blur it!)

  Hello

  I have some photos where the skin of the leg of the model is not uniform brighteness. Without this vagueness, I tried the clone stamp, but it is very difficult not to introduce new variations of brightness.

  What is the best way to make the uniform skin of brightness (in fact, the same color!)?

  Thank you

  Juan dent

  I know EXACTLY what you mean.  I was doing something exactly on these lines just yesterday.

  It is not trivial, but it is doable.

  For 'hard points', you can try the Spot Healing Brush first.

  But here is a tip that I use sometimes which may well increase overall finesse:

  1. select just the surface of the skin.

  2. selection a little market and soften the edge, just to make sure that you don't mess the edges.

  3. median filter - noise - and set the RADIUS to be big enough.  Look at the image to see the level of smoothing.

  4. change - bland and knock back effect, while it is not perfect, but makes a subtle improvement.

  

  

  

  Then, for clearing-up soft darkening, try the burn and Dodge tools, at a low level of exposure (and possibly with Airbrush Mode).  Work slow.

  Cloning with low opacity can sometimes help as well.

  -Christmas

• What is the best way to check the data

  What is the best way to check the actual changes in the data, i.e., to be able to see each insert, update, delete on a given line, when it happened, who did it, and what looked like to the front row and after the change?
  
  Currently, we have implemented our own audit infrastructure where we generate standard triggers and an audit table to store the OLD (values at the beginning of the Timekeeping point row before) and NEW (values at the beginning of the point of timing after line) values for each change.
  
  I put this strategy due to the performance impact there (important say least) and because it's something that a developer (confession, I'm the developer) came with, rather than something is a database administrator came with. I looked in the audit of the Oracle, but it doesn't seem like we would be able to go back and see what a line looked like at some point in time. I also watched flashbacks, but this seems like it would take a monumental amount of storage just to be able to go back a week, much less the years currently keep us these data.
  
  Thank you
  Matt Knowles
  
  Published by: mattknowles on January 10, 2011 08:40

  mattknowles wrote:
  What is the best way to check the actual changes in the data, i.e., to be able to see each insert, update, delete on a given line, when it happened, who did it, and what looked like to the front row and after the change?

  Currently, we have implemented our own audit infrastructure where we generate standard triggers and an audit table to store the OLD (values at the beginning of the Timekeeping point row before) and NEW (values at the beginning of the point of timing after line) values for each change.

  You can either:
  1. set up your own audit custom (as you do now)
  2 flashback Data Archive (11 g). Application for licence.
  3 version check your tables with Workspace Manager.

  >

  I put this strategy due to the performance impact there (important say least) and because it's something that a developer (confession, I'm the developer) came with, rather than something is a database administrator came with. I looked in the audit of the Oracle, but it doesn't seem like we would be able to go back and see what a line looked like at some point in time. I also watched flashbacks, but this seems like it would take a monumental amount of storage just to be able to go back a week, much less the years currently keep us these data.

  Unfortunately, the audit of data always takes a lot of space. You should also consider the performance, as custom triggers and Workspace Manager will perform much slower than the FDA if there is heavy DML on the table.