Beta feedback

can I get rid of the feedback on the iphone app?

No, it is only the offifical version.

Tags: Mac OS & System Software

Similar Questions

  • How to get rid of the app iOS 10 beta feedback?

    I made the beta of iOS 10, and it came with the app of feedback. I updated my phone to the iOS version final 10, but the feedback app is still on my phone. I tried now button but no little 'x' appears. Can someone please.

    You go to settings > general > profiles. Then, select the Beta iOS 10 profile and delete it. This will remove your device from the 10 future iOS betas and get rid of the app of Feedback.

  • How to provide beta feedback without getting a forbidden error?

    When I try to provide a (negative) feedback on ff mobile, I get a forbidden error.
    Maybe this is caused by not providing last visited url?

    Sorry, we are having problems today with our comment server. You can try again, or you can tell us your comments here as a response to this question. Thank you!

  • Best disk internal SSD for end 2009 27 "?

    Hello!

    I am trying to decide the best new (1 TB or 2 TB) internal SSD for my October 2009 27 "iMac (3.06 GHz Core 2 Duo).

    I see OWC has a drive and a kit that are certainly compatible, but the Samsung EVO and PRO seem to get better feedback. Any thoughts or ideas are appreciated!

    Get the OWC

  • Qosmio G10-133: black bar in the middle of the screen

    I had a display of my G10 problem before, last year the malfunction just screen to a point where it would remain empty and I have to constantly push the display button to make it work. Needless to say that I sent and Toshiba has replaced the graphics card.

    But now I have another problem of display. An hour ago, I was using my laptop and all of a sudden a massive black bar, would say about 7 to 8 cm wide appeared in the middle of my screen. I tried a fresh install of the operating system, update of the graphics drivers, but its still there. If I turn on my laptop to the phases of the white bar to really show the full screen again in a black bar.

    Someone has an idea? Any help would be greatly appreciated.

    Kind regards
    Rhys

    Hello

    before we can send you a better feedback, will you please connect an external monitor to your laptop and let us know if you have the same black bar there?
    Could you also start your laptop and enter directly into the BIOS settings. Is there a false image, too?

    Concerning
    chain

  • From 10.0.8 to 10.2.1 - old projects/events does not

    I switched to a new computer, so I brought my internal hard drive with her, which included all my projects and final events cut version I used, 10.0.8.

    When I installed Final Cut on the new machine, it me upgrade 10.2.1. Then, I was prompted to upgrade my old projects and events to work with the new version.

    However, when I did it, Final Cut gave me the following message is displayed: Final Cut Pro has encountered an error in updating projects and events.

    I have a lot of projects and events that I need for work that I can't access now. Can someone help me?

    If you have many projects that need updated, rather than make them all at once, consider using Event Manager X do individually. This will help you isolate problems:

    X event handler

    0-1-libraries-the-better-way/ http://www.philiphodgetts.com/2013/12/Upgrade-Your-Events-and-Project-to-FCP-x-1

    so if you have remaining projects that will not refresh, report it to apple to the http://www.apple.com/feedback/finalcutpro.html. for advice on sending better feedback, see http://www.fcpworks.com/submitting-better-fcpx-feedback-to-apple/

  • Management Console

    is it useful for the domestic average user to use xp management console

    I do not use the MMC for nothing - it's actually quite "stupid" If you do not add a lot of snap-ins, but I think that you should be able to do anything without using MMC.

    If there is something in particular you're curious to know with MMC, tell us more about it and get better feedback.

  • Context menu disappears

    Hello community,

    We have an application adf with a table with lots of data. To improve the operation of the table, we have implemented a context menu. If I right click on a row in the table, the context menu is displayed and I can choose a menu entry.

    But...

    There is another scenario:

    I right click to get the context menu. Then I see: Oops, it of the wrong line and right-click again on another line. The shortcut menu disappears (which is good) but does not come back again on any other right click. After reloading the page, I can again call the context menu.

    This seems to be a bug for me but there may be something else wrong with my application?

    JDEV Studio Edition Version 11.1.2.4.0

    Browser: Firefox 31.8, IE 9.0.8112

    Can someone give an opinion?

    Here is my code. I removed the headphones of the property. It is not important in this case and makes the code less readable:

    <af:popup childCreation="deferred" autoCancel="disabled" id="p1"
                                                          contentDelivery="lazyUncached">
                                                    <af:menu text="menu 1" id="m2" contentDelivery="lazy">
                                                        <af:commandMenuItem text="Nachricht öffnen" id="cmi3"
                                                                            action="#{monitorClickBean.callMessage}">
                                                        </af:commandMenuItem>
                                                        <af:group id="g2">
                                                            <af:commandMenuItem text="Nachricht herunterladen"
                                                                                id="cmi2">
                                                            </af:commandMenuItem>
                                                            <af:commandMenuItem text="Suche passenden Eintrag" id="cmi1"
                                                                                action="#{monitorClickBean.MarkSameMessageFromMETA}"
                                                                                disabled="#{pageFlowScope.MetaFilterValueChangedBean.someFiltersSet}"
                                                                <af:setPropertyListener from="#{row2.SidIe}"
                                                                                        to="#{pageFlowScope.paramSID_IE}"
                                                                                        type="action"/>
                                                            </af:commandMenuItem>
                                                        </af:group>
                                                        <af:group id="g4">
                                                            <af:commandMenuItem text="Fehlermeldung anzeigen" id="cmi7"
                                                                                action="Show_Error" useWindow="true"
                                                                                windowHeight="340" windowWidth="500"
                                                                                windowEmbedStyle="inlineDocument"
                                                                                disabled='#{bindings.Status.inputValue ne "ERROR"}'>
                                                            </af:commandMenuItem>
                                                        </af:group>
                                                    </af:menu>
                                                </af:popup>

    I have simply included the context menu inside the contextmenu of the table facet. Here is the structure:

    popup.PNG

    Message geändert durch user8850362

    Kind regards

    André

    I build a small test case (using 12.1.3 as I do not have a 11.1.2.4 version available) and it works OK. The only change I did was to put the autoCancel = "valid" ifor the popup. This gives you better feedback to the user interface. If you set this value to false, you must click twice to get the context menu on the second row (once to close the old, once to get a new).

    Timo

  • Configure the image should appear when the student clicks on the "submit" button?

    What I'm trying to do is to make sure a student taking the test, when they click the button submit, an image shows on the slide (essentially to help provide better feedback).  I have a set now standard action for the image to appear, but it does not appear when the user clicks on send, it shows up once the student clicks on screen/press y to continue - after the publication of the initial feedback box.  I want the image appears at the same time as the legend of feedback.

    Vish, this static button widget has NO break.

    I offered a link to a static widget stopping in this blog (and mentioned in the article that I referred to):

    http://lilybiri.posterous.com/what-i-dislike-in-Captivate-55

    But since you're the COP6, you don't need this widget more since you now have forms that can be used as buttons. Here's a more recent post where I show the use case of the buttons on form on Question slides (with the tricks and traps)

    http://lilybiri.posterous.com/want-a-button-on-question-slide-in-Captivate

    Lilybiri

  • Requirement of minimum hardware for PC Client Oracle11gAS

    as a topic, can someone give me some comments? Thank you!

    Assuming you are referring to the Fusion Middleware 11, I start by saying that it is a set of product of many components and installation options. Able to offer only a recommendation for hardware would depend strongly exactly what you plan to install and make with this installation.

    I recommend the product installation guides. That said, when you look at the minimum requirements for the memory (RAM), I would recommend that you consider adding at least 15 to 20% more than what is document. Remember that these are minimum for installation and basic usage and requirements no conditions to actually use these products in production with charge.

    The product documentation
    http://download.Oracle.com/docs/CD/E21764_01/index.htm

    The system configuration required
    http://download.Oracle.com/docs/HTML/E18558_01/fusion_requirements.htm

    Also note that in most cases, reference to the (strong RAM) is for the product and not necessarily the box. Unless otherwise indicated in the document, you must consider everything that you are running on the computer including the operating system. So, for example, if the installation guide says you need a minimum of 2 gigabytes of RAM, it does not consider this as the needs of the OS. Therefore, in this example, consider the 2gig documented increased by 20% (as suggested above) plus about 1.5 GB for the operating system and other minor applications running, would need you about 4gig of RAM just to install and run the basic features. In many cases the documentation now means 'minimum RAM' and 'available RAM. 'Available RAM' in the document refers to the RAM and swap (virtual memory). My recommendation does not refer to trade. Although the documentation is correct and works, you'll be much happier with more RAM installed.

    Bottom line, in the case of RAM, more is always better. However, remember that on some 32-bit OSs, there is a limit on the amount of RAM available. Be sure to check the documentation for the operating system for more details.

    I forgot to mention, your question would be probably better feedback on the 'application' space forum server:

    Oracle Application Server - general

    .

    Published by: Michael Ferrante, August 2, 2011 10:21

  • Updates does not?

    I tried for months to update for Photoshop CS5 and Lightroom 3, using the Hep / updates within the program and also directly to Adobe.  It always shows 'Manager of Application' required.  I downloaded Manager of Adobe applications, a number of times and installed without success. I am stuck in a loop is going nowhere. I can't either Adobe support online.  What to do? Remove the application, and then use something else?

    There is an installation problem - also I came across this on my own laptop.

    You can go directly to the page updates for each application ( http://www.adobe.com/downloads/updates/ ), or call the technical support and try to walk through the installation of cleaning process.

    In my case, we found a lost file where a file was expected. After you delete the folder, Setup of the MAO ran and worked.

    I've been begging to the Installer team to provide better feedback and diagnosis when things go wrong.  But they don't seem to listen.

  • Name of the program that appear correctly while uninstalling ActiveX

    Hello

    I'm having a problem with ActiveX 10 uninstall. When you go to unistall it, it will give the list of active programs running currently using 10 ActiveX. My program uses ActiveX 10 during the race and will appear in the list, however, for a reason that the case is incorrect. The product name is always displayed in lowercase, while other programs, for example, Yahoo Messenger, will appear with the correct case. This may not seem like the biggest problem, but the part of the name of the product is in the crankcase, so I would like to get this resolved.

    My question is, where is this name being pulled from? I checked the name .exe/image, the name of the process, threads, etc. and that you do not find where that name comes from.

    During uninstall, this program is called which is what shows the wrong tube product name: \Macromed\Flash\FlashUtil10q_ActiveX.exe

    I use a Windows 7 OS, Flash 10.3.181.14, FF4.

    Any ideas or suggestions would be really useful!

    Hello JD at Adobe.

    The name that appears in the dialog conflict is the name of your application, in tiny letters, less the ".exe", as it is returned by the operating system. You are right that some selection of applications appear with the so-called 'friendly names '. This is because these applications are very popular and have been determined for applications that cause the majority of conflicts with our installers/uninstall programs. To provide our customers better feedback what applications they should close for installation success, these friendly names are displayed instead of the raw process names.

    At this point, choosing a good process name is your best way to appear in a meaningful way in the conflict of our installers/uninstall programs dialog box. We do not CAP support.

    However, according to your comments, we opened an enhancement request for a future version of our installation/uninstall programs.

    Thank you for being a valued Forum Adobe user.

    Stephen

    Flash Player engineering

  • [AS3] Losing my religion: subclassing vs composition

    I've been so far a devout disciple of compositing a graphic instance into a class in all cases, rather than make my class extends MovieClip. It is true that I was a piker at AS2 and only now that I am cranking on AS3 I consider myself worthy to call myself a beginner OOP programmer. But I bought all the reasons, and if I were still making AS2 apps, I could stay in this camp.

    But lately my devotion has been shaken, and now I am seriously considering extending (and then subclassing from) MovieClip or Sprite when any class that has a visual component. Whereas before I would always compose in a MC instance, almost never do inherits everything except my own superclass my class and implement interfaces, polymorphism, now I think I will extend well that still implement interfaces for the usual reasons. Still, I also plan to be a follower of the composition of all other ways - I like composition over inheritance. As I lay not MC for classes that have no graphical components, such as components of the logic of the game. (I make games and other interactive entertainment applications, for distribution in the browser).

    Can I please be informed by coders better than me as to the wisdom or folly of my change in attitude?

    Here are a few reasons why my mind is changing; Please feel free to refute or support one of these:

    -Changes between AS2 and AS3 make the downside of subclassing MC/Sprite lower before. I'll leave a lot more informed people come up with good examples, but seems to be the explicit nature of the addition of an object to the display list - the General hit being an MC is small (nonexistent?) if it is not on the list.

    -Colin Moock, in his seminal book "Essential ActionScript 2" advocates composition - see his large MVC example in which his view class, although almost entirely Visual in function, did not extend MC but rather composite MC. However, in all also impressive AS3 Moock book, all of his examples now seem to use the extension. I really admire Moock then gives me a new perspective.

    -All the best practices from Adobe and the examples use extension, that almost all the code samples, I see in other useful forums. I'm not blindly run with the crowd, but I think that I would get better feedback on my code of my peers so I follow suit.

    -All the AS3 Flash components seem to use the extension, and indeed, AS3 itself is strongly focused on the legacy rather than based on the composition, for understandable reasons.

    I am probably missing a lot and bad indicating a large part of what is there, but I hope you get the idea.

    Yet again I ask my peers better: now, what are the arguments for and against extending MC or Sprite for a visually represented classes in AS3? Any comments would be very appreciated.

    For all those who followed this saga breathtaking, Colin Moock generously responded via his blog when I wrote for him. What a guy!

    Find the answer here:
    http://www.Moock.org/blog/archives/000248.html

  • 4.0b1 says I need to download the beta version before I can provide feedback.

    When I click on the feedback (happy or sad), Firefox brings me to a page that says: "Oh!" So, you want to give us feedback on the next version of Firefox. Thank you, but you need to be part of our beta program,"(https://input.mozilla.com/download). I also tried to uninstall the beta version and put it back, but I got the same message.

    To register, simply go to our download page and download the latest beta version of Firefox!

    This has happened

    Each time Firefox opened

    == I first downloaded 4.0b1

    You send messages with a corrupt user agent:
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; B 1 RV:2.0) Gecko/20100630 Firefox/3.0.10,.

    See find which version of Firefox you are using and Web sites or modules incorrectly report incompatible browser
    See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

    Check general.useragent preferences on the topic: config page.
    You can open the topic: config page through the address bar just like you open a Web site.
    Filter: general.useragent

    If all general.useragent prefs are "BOLD" (user set) then right-click this pref and select reset.

  • Beta don't provide feedback.

    When I use the feedback button, I'm headed to a Firefox site telling me that I need to improve before I can provide feedback. The following link shows FFBeta is installed and I can't download anything by the download button. I have a lot of comments. Where and how can I provide it? Thank you!

    Sorry, that this forum only reads the UserAgent of the browser used when you ask a new question, I can't 'see' the browser that you just used here.

    Yes, it is possible that you have installed this mobile version near the end of a cycle of channel or released, again on 01.31. The latest version of Firefox Mobile is available from a link on this page.

    http://www.Mozilla.org/en-us/mobile/

Maybe you are looking for